Self-assembly of [2]rotaxane exploiting reversible Pt(II)- pyridine coordinate bonds

A dinuclear self-assembled cationic macrocycle based on Pt(II)-N(pyridine) coordinative bonds and having competitive triflate anions, as metal counterions, is used in the construction of [2]rotaxane and [2]pseudorotaxane architectures assisted by hydrogen bonding. The kinetic lability of the Pt(II)-N(pyridine) coordinative bond controls the dynamics of the [2]rotaxane.     

Metastable doubly threaded [3]rotaxanes with a large macrocycle

Ring size is a critically important parameter in many interlocked molecules as it directly impacts many of the unique molecular motions that they exhibit. Reported herein are studies using one of the largest macrocycles reported to date to synthesize doubly threaded [3]rotaxanes. A large ditopic 46 atom macrocycle containing two 2,6-bis(N-alkyl-benzimidazolyl)pyridine ligands has been used to synthesize several metastable doubly threaded [3]rotaxanes in high yield (65–75% isolated) via metal templating. Macrocycle and linear thread components were synthesized and self-assembled upon addition of iron(ii) ions to form the doubly threaded pseudo[3]rotaxanes that could be subsequently stoppered using azide–alkyne cycloaddition chemistry. Following demetallation with base, these doubly threaded [3]rotaxanes were fully characterized utilizing a variety of NMR spectroscopy, mass spectrometry, size-exclusion chromatography, and all-atom simulation techniques. Critical to the success of accessing a metastable [3]rotaxane with such a large macrocycle was the nature of the stopper group employed. By varying the size of the stopper group it was possible to access metastable [3]rotaxanes with stabilities in deuterated chloroform ranging from a half-life of <1 minute to ca. 6 months at room temperature potentially opening the door to interlocked materials with controllable degradation rates.

Multiple metastable doubly threaded [3]rotaxanes using a large 46 atom ring were prepared and fully characterized. Varying the stopper group size gave a range of interlocked stabilities in CDCl₃ from a half-life of <1 minute to ca. 6 months.     

Homo- and hetero-[3]rotaxanes with two pi-systems clasped in a single macrocycle

Here we present the first synthesis of a [3]rotaxane with two dumbbell components threaded through a single gamma-cyclodextrin macrocycle. This synthesis is carried out in two steps: first one dumbbell is synthesized threaded through the macrocycle to give a [2]rotaxane, then a second dumbbell is synthesized through the remaining cavity of the [2]rotaxane. We have synthesized a hetero- [3]rotaxane with one stilbene and one cyanine dye threaded through gamma-cyclodextrin, which exhibits quantitative energy transfer between the two encapsulated dyes. The stilbene [2]rotaxane intermediate in this synthesis has a remarkably high affinity for suitably shaped hydrophobic guests in aqueous solution, facilitating the synthesis of [3]rotaxanes and suggesting possible applications in sensors.     

Synthesis of [2]- and [3]rotaxanes through Sonogashira coupling

The synthesis of new [2]- and [3]rotaxanes through Sonogashira coupling has been accomplished in the aim to built oligo(phenyleneethynylene) (OPE) encircled by crown ethers. Optimization of the Sonogashira coupling for the formation of the [2]rotaxane (capping reaction) is presented and the best method has been applied for the synthesis of the longer [3]rotaxane.     

Self-assembly of novel [3]- and [2]rotaxanes with two different ring components: donor-acceptor and hydrogen bonding interactions and molecular-shuttling behavior

Three of the first kind of hetero[3]rotaxanes, which comprise one linear component and one neutral and one tetracationic ring component, have been assembled by using the intermolecular hydrogen bonding and donor-acceptor interactions. Three neutral [2]rotaxanes and three tetracationic [2]rotaxanes have also been synthesized as intermediate products or for the sake of property comparison. The linear molecules are incorporated with two glycine subunits, for templating the formation of the neutral tetraamide cyclophane, and one or two hydroquinone subunits, for inducing the formation of the tetracationic cyclophane. Variable-temperature (1)H NMR investigation reveals that the shuttling behavior of the tetracationic ring component along the linear component is substantially influenced by the existence of the neutral ring component. The spatial repelling interaction of the neutral ring on the electron-deficient tetracationic ring simultaneously weakens the latter's "positioning" tendency at both electron-rich hydroquinone sites of the linear component. As a result, the activation energy associated with the shuttling process of the tetracationic ring between the two hydroquinone sites is remarkably reduced in comparison to that of the shuttling process of the corresponding neutral ring-free [2]rotaxanes. For the first time, the rotation of the dipyridinium subunit around the axis formed by the two methylene groups connecting them within the tetracationic cyclophane has been investigated by variable-temperature (1)H NMR spectroscopy and the associated kinetic data have also been successfully obtained. Furthermore, the UV-vis and fluorescent properties of the new [2]- and [3]rotaxanes have been studied. The results demonstrate that [3]rotaxanes with different ring components possess unique kinetic features that are not available in [3]rotaxanes with identical ring components.     

Self-assembly of novel [3]- and [2]rotaxanes based on donor-acceptor and hydrogen-bonding interactions. Intensified inter-ring repulsion interaction and shuttling behavior

Three novel hetero[3]rotaxanes, which comprise one neutral tetraamide cyclophane, one tetracationic cyclophane, and one linear component, have been assembled by utilizing hydrogen-bonding and donor-acceptor interactions, through three neutral [2]rotaxanes as intermediates. Three tetracationic [2]rotaxanes are also prepared for property comparison. For all three linear components, diamide subunits, the hydrogen-bonding templating moieties, are introduced at the center of the molecules, while the electron-rich hydrogquinone subunits, the donor-acceptor interaction templates, are incorporated between the diamides and the triphenylmethyl stoppers. Compared with the reported [3]rotaxanes, the novel hetero[3]rotaxanes exhibit remarkably intensified spatial interaction between the two ring components, which had been proved by (1)H NMR and UV study. For the first time, inter-ring NOEs are observed for interlocked [3]rotaxanes.     

Two [2]pseudorotaxane-like complexes and their corresponding [2]rotaxanes stabilized via interactions on opposite ends of the same macrocycle

A multiple-use macrocycle recognizes dibenzylammonium ions and 2,6-lutidine derivatives, each in a [2]pseudorotaxane-like manner, through interactions with its diethylene glycol (hydrogen bonding) and 2,6-pyridinedicarboxamide (Pd²⁺ chelation) spacers, respectively. We characterized these complexes in the solid state (X-ray crystallography) and in solution (¹H NMR spectroscopy). The synthesis of two corresponding [2]rotaxanes confirmed that these recognition systems possess [2]pseudorotaxane geometries in solution.     

Face-selective [2]- and [3]rotaxanes: kinetic control of the threading direction of cyclodextrins

New [2]- and [3]pseudorotaxanes containing alpha-cyclodextrin (alpha-CDs) molecules as rotors and alkyl pyridinium derivatives as axles were prepared by a slipping process. The inclusion behavior of these rotaxanes was investigated by using one- and two-dimensional NMR spectroscopy. The methyl group at the 2-position of the pyridinium moiety at the end of each axle molecule was found to control the rates of threading of the alpha-CD onto the axle molecules. alpha-CD can approach axle molecules from a particular direction to form inclusion complexes. Axle molecules that contain a 2-methylpyridinium moiety at one end and a bulky stopper at the other end can regulate the direction of approach to give a [2]pseudorotaxane such as 2 b-alpha-CD. A [3]pseudorotaxane in which two alpha-CD molecules are arranged facing in the same direction at two stations of the tetracationic axle molecule was also obtained. These face-selective behaviors are dominated by kinetic processes rather than thermodynamic processes.     

The synthesis of [2], [3] and [4]rotaxanes and semirotaxanes

The cucurbituril-catalysed synthesis of [2], [3] and [4]semirotaxanes allows access to regioselectively pure, 1,3-disubstituted mono-, bis- and tris-triazoles in high yield after dethreading.     

Degenerate [2]rotaxanes with electrostatic barriers

A synthetic approach to the preparation of [2]rotaxanes (1-5·6PF(6)) incorporating bispyridinium derivatives and two 1,5-dioxynaphthalene (DNP) units situated in the rod portions of their dumbbell components that are encircled by a single cyclobis(paraquat-p-phenylene) tetracationic (CBPQT(4+)) ring has been developed. Since the π-electron-deficient bispyridinium units are introduced into the dumbbell components of the [2]rotaxanes 1-5·6PF(6), there are Coulombic charge-charge repulsions between these dicationic units and the CBPQT(4+) ring in the [2]rotaxanes. Thus, the CBPQT(4+) rings in the degenerate [2]rotaxanes exhibit slow shuttling between two DNP recognition sites on the (1)H NMR time-scale on account of the electrostatic barrier posed by the bispyridinium units, as demonstrated by variable-temperature (1)H NMR spectroscopy. Electrochemical experiments carried out on the [2]rotaxanes 1·6PF(6) and 2·6PF(6) indicate that the one-electron reduced bipyridinium radical cation in the dumbbell components of the [2]rotaxanes serves as an additional recognition site for the two-electron reduced CBPQT(2(˙+)) diradical cationic ring. Under appropriate conditions, the ring components in the degenerate rotaxanes 1·6PF(6) and 2·6PF(6) can shuttle along the recognition sites--two DNP units and one-electron reduced bipyridinium radical cation--under redox control.     

Ferrocene-containing [2]- and [3]rotaxanes. Preparation via an end-capping cross-metathesis reaction and electrochemical properties

Cross-metathesis reactions of terminal olefins with acrylic esters catalyzed by a Ru-carbene complex ((H2IMes)(PCy3)Cl2Ru = CHPh, H2IMes = N,N-bis(mesityl)-4,5-dihydroimidazol-2-ylidene) were applied to the end-capping of [2]pseudorotaxanes composed of dibenzo[24]crown-8 (DB24C8) and ferrocenylmethylammonium derivatives as the macrocyclic and axle components. A [3]rotaxane consisting of two DB24C8s and an axle molecule having ferrocenyl groups at both ends was obtained from the cross-metathesis reaction of two [2]pseudorotaxanes with Fe(C5H4CH2OCOCH = CH2)2. Cyclic voltammograms of the ferrocene-containing rotaxanes show reversible redox reactions whose potentials vary depending on the presence or absence of cationic dialkylammonium groups in the vicinity of the ferrocene units.     

Self-assembly of heteroleptic [2 x 2] and [2 x 3] nanogrids

Using the HETPHEN concept a general and quantitative approach to the formation of heteroleptic nanogrids is illustrated.     

Self-assembly of bis-[1]rotaxanes based on diverse thiourea-bridged mono-functionalized dipillar[5]arenes

Journal of Inclusion Phenomena and Macrocyclic Chemistry - The condensation reaction of mono-amido-functionalized pillar[5]arenes with tere- and iso-phthaloyl diisothiocyanates in acetone under...     

Foldamers in pseudo[2]rotaxanes and [2]rotaxanes: tuning the switching kinetics and metastability

Hydrogen bonded arylamide foldamers have been introduced in switchable pseudo[2]rotaxanes and [2]rotaxanes, which also include a cyclobisparaquat(p-phenylene) (CBPQT⁴⁺) ring and a ‘dumbbell’ containing tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP, for rotaxanes). The foldamer size changes through folding and unfolding serve as a steric handle to modulate the mechanical movement of the CBPQT⁴⁺ ring along the dumbbell of the pseudo[2]rotaxanes and [2]rotaxanes. By varying the number of the repeating units in the foldamer, the kinetics of the solvent-dependent slippage/deslippage of pseudo[2]rotaxanes and the switching of the ring between TTF and DNP of the [2]rotoxanes can be tuned remarkably, with the time scope ranging from several minutes to several days, in twelve solvents of varying polarity, which have been confirmed by the ¹H NMR, UV–vis spectroscopy, and cyclic voltammogram experiments.     

Synthesis of thiophene-capped [2]rotaxanes

Two types of thiophene-capped [2]rotaxanes, i.e., bithienyl (2T)- and bis(3,4-ethylenedioxythiophene)-yl (BEDOT)-capped [2]rotaxanes, were synthesized. The electron-deficient cyclophane of cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺) was used as a macrocycle. Association constants for inclusion complexation of 2T- and BEDOT-derivatives with CBPQT⁴⁺ were obtained by ¹H NMR titration. Due to the donor-acceptor charge transfer absorption band, 2T- and BEDOT-capped [2]rotaxanes have red and green colors, respectively. On the basis of electrochemical analysis, we confirmed that only BEDOT-capped [2]rotaxane is a promising candidate for [3]rotaxane synthesis through oxidation coupling of the thiophene unit.     

Anion-templated assembly of [2]rotaxanes

Anion templation is used to develop a general method for rotaxane synthesis. The anion-templated synthesis of three new [2]rotaxanes containing positively charged pyridinium axles and neutral isophthalamide macrocyclic components is described. The incorporation of electron withdrawing substituents, such as the nitro group, into the 5-position of an isophthalamide bis-vinyl acyclic precursor results in a significant improvement in [2]rotaxane assembly yields. Rotaxane anion binding strengths are also enhanced whilst the rotaxane's unique interlocked binding domain ensures selectivity for chloride--the templating anion--is maintained.     

2]Pseudorotaxanes, [2]rotaxanes and metal-organic rotaxane frameworks containing tetra-substituted dibenzo[24]crown-8 wheels

[2]Pseudorotaxanes, [2]rotaxanes and metal-organic rotaxane framework materials that utilise DB24C8 as the wheel component are well known and structural variations based on changing the axle component are common. Studies in which the DB24C8 wheel is structurally modified are much more limited. Herein, is described the synthesis of symmetrical DB24C8 analogues containing four CH(2)OR (R = CH(2)CH(2)CH(3), CH(2)(C(6)H(5)), C(6)H(5) and C(6)H(4)(4-COOEt)) substituents on the 4 and 5 positions of the aromatic rings. The effect of these molecular appendages on the stability and structures of the interpenetrated and interlocked molecules derived from these new wheels is described. The major effects are an increase in association constants for the formation of [2]pseudorotaxanes relative to DB24C8, the crystal packing of [2]rotaxanes and a change on the internal structure of a 2D MORF (R = C(6)H(5)) compared to DB24C8.     

Self-assembly and characterization of a novel 2D network polymer containing a 60-membered organotin macrocycle

The reaction of 1-(4-carboxyphenyl)-5-mercapto-1 H-tetrazole with trimethyltin chloride in the presence of sodium ethoxide in benzene affords a novel 2D organotin network structure complex 1, which is an unusual organotin network containing a hexanuclear 60-membered organotin macrocycle. The complex has been characterized by elemental analysis, IR, and (1)H, (13)C, and (119)Sn NMR spectroscopy. Furthermore, we have also characterized the complex by X-ray crystallography.     

Post-assembly processing of [2]rotaxanes

The concept of using [2]rotaxanes that carry one or more surrogate stoppers which can subsequently be converted chemically into other structural units, resulting in the formation of new interlocked molecular compounds, is introduced and exemplified. Starting from simple NH2(+)-centered/crown-ether-based [2]rotaxanes, containing either one or two benzylic triphenylphosphonium stoppers, the well-known Wittig reaction has been employed to make, 1) other [2]rotaxanes, 2) higher order rotaxanes, 3) branched rotaxanes, and 4) molecular shuttles--all isolated as pure compounds, following catalytic hydrogenations of their carbon-carbon double bonds, obtained when aromatic aldehydes react with the ylides produced when the benzylic triphenylphosphonium derivatives are treated with strong base. The two starting [2]rotaxanes were characterized fully in solution and also in the solid state by X-ray crystallography. The new interlocked molecular compounds that result from carrying out post-assembly Wittig reactions on two [2]rotaxanes were characterized by (dynamic) 1H NMR spectroscopy. In the case of a molecular shuttle in which the crown ether component is dibenzo[24]-crown-8 (DB24C8), shuttling is slow on the 1H NMR timescale, even at high temperatures. However, when DB24C8 is replaced by benzometaphenylene[25]-crown-8 as the ring component in the molecular shuttle, the frequency of the shuttling is observed to be around 100 Hz in [D4]methanol at 63 degrees C.