Plasmonic splitter based on the metal-insulator-metal waveguide with periodic grooves

In this paper, we have proposed a plasmonic splitter which is composed of a subwavelength slit and two different metal-insulator-metal (MIM) waveguides with periodic grooves. The slit is used to excite surface plasmon polaritons (SPPs) at certain wavelengths. By setting the SPPs resonance wavelengths of the slit as the Bragg wavelengths of MIM waveguides, the SPPs of different wavelengths are able to be confined and guided in the two different MIM waveguides. The numerical results of two-dimensional finite difference time domain (2D-FDTD) demonstrate that our proposed structure is capable of splitting light into two MIM waveguides.     

Terahertz surface plasmon-polariton propagation and focusing on periodically corrugated metal wires

In this Letter, we show how the dispersion relation of surface plasmon polaritons (SPPs) propagating along a perfectly conducting wire can be tailored by corrugating its surface with a periodic array of radial grooves. In this way, highly localized SPPs can be sustained in the terahertz region of the electromagnetic spectrum. Importantly, the propagation characteristics of these spoof SPPs can be controlled by the surface geometry, opening the way to important applications such as energy concentration on cylindrical wires and superfocusing using conical structures.     

Surface plasmon polaritons in metallo-dielectric meander-type gratings

The optical properties of a gold film deposited on a quartz substrate with periodic grooves were investigated theoretically. The main peculiarities of the spectra are due to the excitation of the surface plasmon polaritons (SPPs). It is shown that the empty lattice approximation (ELA) for the SPPs is well applicable for the structure of interest. Two different approaches for deriving the air-gold SPP dispersion curves are compared. Our special attention is focused on the wavelength region approaching the d-band in gold, where the dielectric function is of a strongly non-Drude-type.     

Geometrical condition for observing Talbot effect in plasmonics infinite metallic groove arrays

The plasmonics Talbot effect in metallic layer with infinite periodic grooves is presented in this study. Numerical approach based on the finite element method is employed to verify the derived Talbot carpet on the non-illumination side. The groove depth is less than the metallic layer thickness; however, for specific conditions, surface plasmons polaritons(SPPs)can penetrate through grooves, propagate under the metallic layer, and form Talbot revivals. The geometrical parameters are specified via groove width, gap size, period, and wavelength, and their proper values are determined by introducing two opening ratio parameters. To quantitatively compare different Talbot carpets, we introduce new parameters such as R-square that characterizes the periodicity of Talbot images. The higher the R-square of a carpet, the more coincident with non-paraxial approximation the Talbot distance becomes. We believe that our results can help to understand the nature of SPPs and also contribute to exploring this phenomenon in Talbot-image-based applications, including imaging, optical systems, and measurements.     

介质填充浅槽周期结构表面上的太赫兹表面等离子体激元

通过在金属表面刻成浅的垂直凹槽,并在槽内填充不同的介质,对金属表面浅槽周期结构上传播的表面等离子体激元的色散特性与填充介质的关系进行了研究.研究表明通过在周期凹槽内填充介质可以有效降低人工表面等离子体激元的渐近频率,并增强金属表面对电磁场的约束.分析了太赫兹波段金属的吸收损耗对人工表面等离子体激元特性的影响,结果显示基于填充介质的浅槽周期表面结构可以获得长距离传输以及场的亚波长约束.通过对波传输的数值仿真,验证了该表面结构在太赫兹波段良好的导波能力.这种表面结构对太赫兹波段新型集成导波器件的设计具有参考价值.     

介质填充浅槽周期结构表面上的太赫兹表面等离子体激元

通过在金属表面刻成浅的垂直凹槽,并在槽内填充不同的介质,对金属表面浅槽周期结构上传播的表面等离子体激元的色散特性与填充介质的关系进行了研究.研究表明通过在周期凹槽内填充介质可以有效降低人工表面等离子体激元的渐近频率,并增强金属表面对电磁场的约束.分析了太赫兹波段金属的吸收损耗对人工表面等离子体激元特性的影响,结果显示基于填充介质的浅槽周期表面结构可以获得长距离传输以及场的亚波长约束.通过对波传输的数值仿真,验证了该表面结构在太赫兹波段良好的导波能力.这种表面结构对太赫兹波段新型集成导波器件的设计具有参考价值.     

基于塔姆激元-表面等离极化激元混合模式的单缝加凹槽纳米结构的增强透射

金属单缝纳米结构因为结构简单、易于集成,常用在基于表面等离极化激元(surface plasmon polaritons,SPPs)的纳米结构中构建光源.但是,金属亚波长单缝结构一直存在透射率低的问题,如何提高其透射率一直是研究的重点.为了更好地提高金属亚波长单缝的透射率,本文对之前文献提出的分布式布拉格反射镜(distributed bragg reflector,DBR)和金属银薄膜纳米缝结构进行改进,在金属银薄膜两侧设计凹槽.当TM偏振光由DBR侧入射至DBR-银纳米缝结构时,DBR-银膜界面上和银膜入射侧凹槽一起激发的塔姆激元(Tamm plasmon polaritons,TPPs)和SPPs,以及纳米缝和银膜出射侧凹槽对的SPPs同时激发,利用凹槽激发的SPPs和银膜表面处的TPPs-SPPs混合模式的干涉相长耦合作用,通过塔姆激元的局域场增强效应和两侧凹槽与单纳米缝的干涉相长耦合作用进一步提高了表面等离极化激元模式的激发效率,再加上纳米缝中的类法布里-珀罗腔共振效应,使纳米缝的透射率得到增强.本文采用有限元方法研究了DBR-银纳米缝结构上单纳米缝加凹槽的透射特性.经过一系列参数优化,使DBR-银纳米缝凹槽结构的最大透射率增加到0.22,相对于TiO_2-银纳米缝结构的透射率(0.01)提高了22倍,比文献[23]得到的最大透射率0.166有所提高.研究结果在纳米光源设计、光子集成电路和光学信号传输等相关领域具有一定的应用价值.     

Broadband and high‐efficiency conversion from guided waves to spoof surface plasmon polaritons

The conversion from spatial propagating waves to surface plasmon polaritons (SPPs) has been well studied, and shown to be very efficient by using gradient‐index metasurfaces. However, feeding energies into and extracting signals from functional plasmonic devices or circuits through transmission lines require the efficient conversion between SPPs and guided waves, which has not been reported, to the best of our knowledge. In this paper, a smooth bridge between the conventional coplanar waveguide (CPW) with 50 Ω impedance and plasmonic waveguide (e.g., an ultrathin corrugated metallic strip) has been proposed in the microwave frequency, which converts the guided waves to spoof SPPs with high efficiency in broadband. A matching transition has been proposed and designed, which is constructed by gradient corrugations and flaring ground, to match both the momentum and impedance of CPW and the plasmonic waveguide. Simulated and measured results on the transmission coefficients and near‐filed distributions show excellent transmission efficiency from CPW to a plasmonic waveguide to CPW in a wide frequency band. The high‐efficiency and broadband conversion between SPPs and guided waves opens up a new avenue for advanced conventional plasmonic integrated functional devices and circuits.     

十字结构银纳米线的表面等离极化激元分束特性

金属纳米线波导可以将光局域在亚波长尺度内传播, 在纳米光子集成回路方面有着重要的作用. 本文应用有限元方法, 研究了十字结构银纳米线的表面等离极化激元分束特性. 结果表明, 不同模式的表面等离极化激元在十字结构三个分支的输出依赖于端面的几何结构参数. 此外, 研究还发现由于不同模式表面等离极化激元叠加, 在十字结构的分支上出现了周期性电场分布.     

Large-area surface-plasmon polariton interference lithography

Large-area surface-plasmon polariton (SPP) interference lithography is presented, which uses an attenuated total reflection-coupling mode to excite the interference of the SPPs. The interference of the SPPs causes a highly directional intensity range in a finite depth of the electric field, which is good for noncontact. Finite-difference time-domain simulations of the interference on a thin resist layer show that broad-beam illumination with a p-polarized light at a wavelength of 441 nm can produce features as small as 60 nm with high contrast, smaller than lambda/7. Our results illustrate the potential for patterning periodic structures over large areas at low cost.     

Electromagnetic interaction between local surface plasmon polaritons and an atmospheric surface wave plasma jet

We analyze the electromagnetic interaction between local surface plasmon polaritons （SPPs） and an atmospheric surface wave plasma jet （ASWPJ） in combination with our designed discharge device. Before discharge, the excitation of the SPPs and the spatial distribution of the enhanced electric field are analyzed. During discharge, the critical breakdown electric field of the gases at atmospheric gas pressure and the surface wave of the SPPs converted into electron plasma waves at resonant points are studied. After discharge, the ionization development process of the ASWPJ is simulated using a two- dimensional fluid model. Our results suggest that the local enhanced electric field of SPPs is merely the precondition of gas breakdown, and the key mechanism in maintaining the discharge development of a low-power ASWPJ is the wave-mode conversion of the local enhanced electric field at the resonant point.     

The theoretic analysis of maskless surface plasmon resonant interference lithography by prism coupling

The use of an attenuated total reflection-coupling mode of prism coated with metal film to excite the interference of the surface plasmon polaritons （SPPs） was proposed for periodic patterning with a resolution of subwavelength scale. High intensity of electric field can be obtained because of the coupling between SPPs and evanescence under a resonance condition, which can reduce exposure time and improve contrast. In this paper, several critical parameters for maskless surface plasmon resonant lithography are described, and the preliminary simulation based on a finite difference timedomain technique agrees well with the theoretical analysis, which demonstrates this scheme and provides the theoretical basis for further experiments.     

Plasmon-Assisted Phase-Matched Second- and Third-Harmonic Generation in Single-Negative Heterostructures

Dispersion relations of surface plasmon polaritons （SPPs） in sandwiched optical systems are studied. The system is actually a kind of SPP waveguides, with two kinds of single negative material （SNG） as core and cladding layers, respectively. Since both TM and TE polarized SPPs can be excited in the structure, the dispersion of SPPs becomes more abundant and leads to colorful nonlinear opticM properties. The authors demonstrate the effective phase-matched second and third-harmonic generation （SHG, THG） assisted by the coupled SPPs. A cascaded second-order nonlinear process can Mso be achieved in the structure when the thickness of the core layer is properly selected, leading to the simultaneous SHG and THG. Further investigations show that much easier phase-matching can be fulfilled in the SNG waveguide array. Our results would be of potential use for surface-enhanced frequency conversion device such as light emitters or lasers.     

Propagation of surface plasmon polaritons on semiconductor gratings

We present time-domain measurements of terahertz surface plasmon polaritons (SPPs) propagating on gratings structured on silicon surfaces. Using single-cycle pulses of terahertz radiation to excite SPPs in a broad frequency range, we observe that the efficient SPPs scattering on the semiconductor periodic structure introduces significant dispersion and modifies the SPPs propagation. A stop gap, or a frequency range where SPPs are Bragg reflected, is formed by the structure. This gap depends strongly on the Si doping density and type. The resonant scattering at the edge of the gap reduces the group velocity by more than a factor of 2. The measurements show a good agreement with our numerical calculations based on the reduced Rayleigh equation.     

Coupled THz Waveguide Utilizing Surface Plasmon Polaritons on Thin Dielectric Slab Sandwiched between Two Corrugated Metallic Claddings

We present a comprehensive experimental study of terahertz （THz） wave propagation utilizing surface plasmon polaritons （SPPs） on the interfaces of a thin dielectric core layer sandwiched between two corrugated metallic claddings. THz wave impinges on the structured surfaces at normal incidence. Long-lasting oscillation propagation features are observed in the temporal waveform after traveling through the periodic arrays. The enhanced THz transmission can be achieved due to the coupling between incident waves to SPPs at the bottom and top interfaces. The finite element method is used to simulate the field distribution and the transmission mode in the waveguide. The hybrid waveguide with low absorption has great potential applications in THz integrated devices.     

Enhanced nonlinear optical conversion from a periodically nanostructured metal film

We demonstrate an approximately10(4) increase in conversion efficiency for optical second-harmonic generation (SHG) from a periodically nanostructured metal structure consisting of a single subwavelength aperture in a thin silver film surrounded by a set of concentric surface grooves. The forward-transmitted second-harmonic radiation from this structure is measured relative to that from an identical aperture with no surrounding surface periodicity. We explain the observed SHG enhancement quantitatively in terms of a measured 120x increase in the strength of the fundamental radiation in the vicinity of the aperture resulting from the periodic nanostructuring.     

基于SPPs-CDEW混合模式的亚波长单缝多凹槽结构全光二极管

全光二极管是集成光子回路上最基本的光子器件,如何有效增强全光二极管的单向透射性,提高消光比一直是学者们研究的重点.当前,利用表面等离极化激元(surface plasmon polaritons,SPPs)和复合衍射衰逝波(composite diffracted evanescent wave,CDEW)的亚波长金属微纳结构构建全光二极管器件还鲜有研究.因此,开发出一种可调制的全光二极管,对未来制备复杂的光子回路具有重要意义.本文提出了一种基于SPPs-CDEW混合模式设计全光二极管的方法和结构,该结构结合纳米缝中的类法布里-珀罗共振效应,利用结构参数对SPPs进行调控,实现了光束单向透过的功能.首先,利用理论推导和有限元算法分析了单缝-对称双凹槽纳米结构的透射增强现象,提出了透射增强和削弱的物理机理.其次,计算出规约化透射率随单狭缝和凹槽对之间距离变化的远场透射谱,给出的理论和数值计算结果符合得很好.最后,通过此透射谱精确确定凹槽的位置和数量,得出上表面对称分布五对增强透射凹槽、下表面六对抑制透射凹槽的最优全光二极管结构,有效增强了全光二极管的单向透射性,提高了消光比,最大消光比可以达到38.3 dB,即正向透射率是反向透射率的6761倍,比已有文献提高了14.6 dB,并在850 nm左右有70 nm宽的工作波长带宽(20 dB).本文提出的光二极管结构简单,宽带宽工作,易于集成,耦合效率高,研究结果对光学信号传输、集成光回路、超分辨率光刻等相关领域具有潜在的应用价值.     

基于金属表面等离子激元控制光束的新进展

表面等离子激元(Surface plasmon polaritons,SPPs)是一种在金属-介质界面上激发并耦合电荷密度起伏的电磁振荡,具有近场增强、表面受限、短波长等特性,在纳米光子学的研究中扮演着重要角色。近年来表面等离子光学和基于SPPs的纳米光子器件的研究引起了国际上科学家们的广泛关注。讨论了SPPs的基本原理和在亚波长结构下的光学特性,介绍了基于亚波长金属结构的表面等离子激元在空间光束准直与聚焦、平面内光束聚焦与传导和在近场纳米光束的控制等方面的研究情况,以及在纳米光子学器件中的潜在应用。     

Femtosecond laser-induced blazed periodic grooves on metals

In this Letter, we generate laser-induced periodic surface structures (LIPSSs) on platinum following femtosecond laser pulse irradiation. For the first time to our knowledge, we study the morphological profile of LIPSSs over a broad incident angular range, and find that the morphological profile of LIPSSs depends significantly on the incident angle of the laser beam. We show that LIPSS grooves become more asymmetric at a larger incident angle, and the morphological profile of LIPSSs formed at an incident angle over 55° eventually resembles that of a blazed grating. Our study suggests that the formation of the blazed groove structures is attributed to the selective ablation of grooves through the asymmetric periodic surface heating following femtosecond pulse irradiation. The blazed grooves are useful for controlling the diffraction efficiency of LIPSSs.     

Frequency control of surface plasmons with oscillating metal-insulator-metal waveguides

A single frequency of surface plasmon polaritons (SPPs) will be converted to many discrete frequencies as they are transmitted through a metal-insulator-metal waveguide with its core width undergoing a harmonic oscillation. The process of the frequency conversion shares many key properties with the light diffraction in discrete optical systems. By employing the conception of optical diffraction management, we can control the discrete frequencies of SPPs such as the intensity and spectrum width by changing the initial phase of the waveguide oscillation. The study bridges the spatial discrete diffraction and frequency transition of SPP modes. Theoretical analysis based on the effective index method and coupled mode theory is provided in detail.