Vertical coupling characteristics between hybrid plasmonic slot waveguide and Si waveguide

For development of complementary metal–oxide–semiconductor (CMOS)-compatible integrated optical circuits, vertical directional coupling between a hybrid plasmonic slot waveguide and a Si waveguide is theoretically investigated in detail. To determine the vertical separation gap and efficient coupling length, we investigate the characteristics of the even and odd supermodes at a wavelength of 1.55 μm. The vertical coupler transfers 90% of the power carried by the Si waveguide to the hybrid plasmonic slot waveguide after normalizing to reference waveguides when the gap is 60 nm and the coupling length is 2.6 μm. Because of the lossy hybrid guided mode in the plasmonic waveguide, the transmitted power exhibits damped sinusoidal behavior depending on the overlapping length. The proposed vertical coupler shows more efficient light coupling between a dielectric and plasmonic waveguide in comparison to the other types of hybrid coupler, and can be exploited further for on-chip integrated opto-electronic circuits.     

An efficient directional coupling from dielectric waveguide to hybrid long-range plasmonic waveguide on a silicon platform

The silicon-based three-dimensional hybrid long-range plasmonic waveguide not only supports long-range propagation distance (~mm) but also has an ultra-small modal area (~10^?2 μm²) at 1.55 μm. Here, we propose a directional coupler for effective coupling from a dielectric slab-waveguide to the hybrid plasmonic waveguide on a silicon platform. Our simulation results show that the coupler is able to excite hybrid long-range plasmonic mode with short coupling length, low insertion loss, and high extinction ratio. With the arm separation of 0.3 μm, the coupling length can be made 5.2 % of the propagation length of the hybrid plasmonic waveguide, while the insertion loss and extinction ratio are ?0.12 and 22.4 dB, respectively. This coupler offers the potential applications in signal routing between the hybrid long-range plasmonic waveguide and dielectric waveguide in the photonic integrated circuits.     

Nanoplasmonic directional couplers and Mach–Zehnder interferometers

We present a novel design and analysis of two nano-scale plasmonic devices: a directional coupler and a Mach–Zehnder interferometer. The designs of the two devices are based on our recent work on the air-gap coupler that resulted in high coupling efficiency between a dielectric waveguide and a plasmonic waveguide. The two devices are embedded between two dielectric waveguides and operate at optical telecom wavelengths. The overall efficiency was 37% for a 2×2 directional coupler switch and above 50% for the proposed designs for a Mach–Zehnder Interferometer. The efficiency in the proposed devices can be increased using broader plasmonic waveguides.     

Design of hybrid optical waveguide with a 90° bend structure for high density photonics integrated circuits

A hybrid optical waveguide having a 90° sharp bend structure, composed of a dielectric straight waveguide, tapered dielectric strip waveguide, and microscale metal gap waveguide, is proposed and simulated to improve the efficiency of light coupling between dielectric and plasmonic waveguides. Our simulation result is a critical step for the hybrid integration of plasmonic components with conventional dielectric components.     

Hybrid vertical directional coupling between a long range surface plasmon polariton waveguide and a dielectric waveguide

To investigate light coupling between a long range surface plasmon polariton (LRSPP) waveguide and a conventional integrated optical component, a hybrid vertical directional coupler consisting of a LRSPP waveguides and a dielectric waveguide is investigated and fabricated. In the proposed coupler the dielectric waveguide and LRSPP waveguide are vertically configured for dense integration and strong coupling. The characteristics of the even and odd super-modes of the coupler are also analyzed to design the device. The fabricated device exhibits damped sinusoidal behavior along the coupling length due to propagation loss of the LRSPP waveguide. The maximum power transfer of 86% from the LRSPP waveguide to the dielectric waveguide is achieved at the coupling length of 600 μm. The measured characteristics of the device are in relatively good agreement with a theoretical analysis.     

Circular arc plasmonic waveguide couplers between two-dimensional dielectric slab waveguides and plasmonic waveguides

We investigate the properties of arc plasmonic waveguide coupler between two-dimensional dielectric slab waveguides and plasmonic waveguides with two-dimensional finite difference time domain methods. The simulation results show that transmission efficiency between high index dielectric slab waveguides with width 300 nm and silver-air-silver waveguides with width 40 nm connected by the coupler can reach to 90.4% at optical communication wavelength. And, by optimizing the shapes near the ends of the coupler, the transmission efficiency can be improved to 98.4%.     

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

A coupler is proposed to interface a hybrid dielectric-loaded plasmonic waveguide (HDLPW) with a silicon photonic slab waveguide. The HDLPW is firstly designed and optimized to attain the best tradeoff between the mode confinement and the propagation distance. The designed coupler is inspired from the taper configuration and numerically modeled through finite-difference time-domain (FDTD) simulation. The results demonstrate that a high confinement and low loss of the energy is achieved from a silicon photonic slab waveguide into the dielectric slot of area 50×200 nm² in the HDLPW. The transmission attained through the coupler with a compact size of 400 nm is found to be as high as 80% (1 dB). Further, the planar nature of taper configuration makes the coupler easy to fabricate using the state-of-the-art CMOS facilities. The proposed coupler is useful in enabling the integration between photonic and hybrid plasmonic waveguides and thus realizing on-chip hybrid integrated circuits.     

Reducing crosstalk between nanowire-based hybrid plasmonic waveguides

Hybrid plasmonic waveguides based on a surface oxidized dielectric nanowire placed on a metal surface can facilitate simultaneously deep subwavelength mode confinement and large propagation length. Directional coupling based on such waveguides are theoretically investigated. Much lower crosstalk is noticed for such hybrid plasmonic waveguides compared to conventional waveguides based on bare dielectric nanowires. Some modifications, such as vertically placing the metal surfaces or using a metallic block between the nanowires, are studied which can further reduce the crosstalk between two waveguides. The proposed low crosstalk structures based on hybrid plasmonic waveguides can provide a simple platform for plasmonic integration which can at the same time easily interface with traditional photonic circuits.     

Negative index and indefinite media waveguide couplers

We study the coupling interaction between dielectric waveguides and coupling elements made from negative-refracting media. The coupling configuration consists of a length of dielectric waveguide, which terminates either directly into or near a planar layer composed of the negative-refracting medium, and is followed by a second waveguide. Radiation output from the first waveguide is refocused at the position of the second waveguide, so that the negative-refracting layer serves as a coupler between the waveguides. Because both isotropic negative-index layers and bilayers of indefinite media can recover the near-field, evanescent components of a source field distribution, the coupling between the input and output waveguides can be highly efficient – in principle providing perfect, lossless coupling. We present simulations and some initial experimental results illustrating the coupling effect, and speculate on the potential for optical fiber couplers and integrated modulators. PACS 42.79.Gn; 41.20.-q; 42.70.-a     

All-dielectric bowtie waveguide with deep subwavelength mode confinement

Plasmonic waveguides and conventional dielectric waveguides have favorable characteristics in photonic integrated circuits. Typically, plasmonic waveguides can provide subwavelength mode confinement, as shown by their small mode area, whereas conventional dielectric waveguides guide light with low loss, as shown by their long propagation length. However, the simultaneous achievement of subwavelength mode confinement and low-loss propagation remains limited. In this paper, we propose a novel design of an alldielectric bowtie waveguide, which simultaneously exhibits both subwavelength mode confinement and theoretically lossless propagation. Contrary to traditional dielectric waveguides, where the guidance of light is based on total internal reflection, the principle of the all-dielectric bowtie waveguide is based on the combined use of the conservation of the normal component of the electric displacement and the tangential component of the electric field, such that it can achieve a mode area comparable to its plasmonic counterparts. The mode distribution in the all-dielectric bowtie waveguide can be precisely controlled by manipulating the geometric design. Our work shows that it is possible to achieve extreme light confinement by using dielectric instead of lossy metals.     

Coupling and crosstalk characteristics of hybrid silicon plasmonic waveguides

In this paper, the design and analysis of an ultracompact coupler based on a hybrid silicon plasmonic waveguide (HSPW) is proposed and its coupling and crosstalk characteristics have been theoretically investigated for the development of optical interconnects that can be realized using well-established complementary metal-oxide-semiconductor-compatible fabrication techniques. To determine the minimum horizontal separation distance and efficient coupling length for the designed coupler, the symmetric and antisymmetric supermodes are obtained and their characteristics are studied at a wavelength of 1.55 μm. Efficient light coupling is exhibited by the HSPW coupler with 75 % of power transfer between the two HSPWs with ultrashort coupling length of 2.14 μm when the separation distance is 50 nm. Further, it is shown that the crosstalk is significantly reduced with the insertion of metallic strip between the two HSPWs for realizing highly dense integrated plasmonic circuits.     

Design and analysis of a vertical directional coupler between a three-dimensional plasmonic slot waveguide and a silicon waveguide

The design of a vertical directional coupler between a three-dimensional plasmonic slot waveguide and a silicon waveguide is theoretically investigated in detail. It consists of two steps: the design of isolated plasmonic slot waveguide and silicon waveguide and the determination of the gap between the two waveguides and the length of a coupling region. The designed structure transfers 70.8% of the power carried by the silicon waveguide mode to the plasmonic slot waveguide mode when the gap is 150 nm and the coupling length is 2.14 μm. The wavelength dependence of our vertical directional coupler is also studied. The analysis shows that the amount of the transferred power changes slightly over a very wide wavelength range between 1.40 μm and 1.61 μm. Moreover, if we employ the fabrication technology for silicon photonics, it is quite tolerant to the variation of the length of its coupling section. Finally, the vertical directional coupler is considered for a polarizer.     

基于表面等离子体的太赫兹光束方向调控的模拟研究

本文根据锑化铟(InSb)材料在THz波段下复介电常数对温度的响应特性,采用了带有光栅的锑化铟-介质-锑化铟的表面等离子体波导结构,实现了1THz频率光束的准直出射,并能够通过调整结构两侧光栅的温度差来控制出射光束的角度.由时域有限差分方法得到光束偏转角度与温度差之间的关系.理论上利用表面等离子体波导模式的光栅耦合机理解释光束方向改变的原因. 关键词： 表面等离子体 太赫兹 时域有限差分方法 光束方向控制     

基于耦合介质纳米线的深亚波长局域波导

提出了一种基于耦合介质纳米线的深亚波长局域波导,通过两根紧邻的高折射率介质纳米线的耦合,该波导可以将光场有效束缚在纳米线之间的低折射率纳米缝隙中. 计算模拟的结果表明,该波导的有效模场面积达到Λ²₀/200,比单根纳米线波导小一个数量级,这种深亚波长的模场束缚能力可以与表面等离激元混合波导相比拟. 计算模拟的结果还表明,纳米线可能带有的低折射率氧化膜、低折射率衬底的存在、以及纳米线间尺寸存在的一定差异对于该波导结构的实际应用都不会产生很大 关键词： 介质波导 亚波长局域 表面等离激元波导 纳米线     

Analysis and design of efficient coupling in photonic crystal circuits

A rigorous analysis and design of efficient coupling from photonic crystal (PhC) waveguides into conventional dielectric waveguides is reported. Closed-form expressions for the reflection and transmission matrices that completely characterize the scattering that occurs at the interface are derived based on an eigenmode expansion technique and a Bloch basis. Analytic expressions are used to analyze the reflection into PhC waveguides. We obtain that negligible reflection can be achieved by choosing a certain interface within a PhC unit cell. Furthermore, analytic expressions are used to design a novel and compact coupler structure in order to achieve high coupling efficiency when broad dielectric waveguides are considered. Thereby, transmission efficiencies near 100 from the fundamental guided Bloch mode into the fundamental waveguide mode are achieved.     

An ultracompact hybrid plasmonic waveguide polarization beam splitter

We propose an ultracompact polarization beam splitter based on an asymmetric directional coupler, which comprises of a horizontally slotted waveguide and a hybrid plasmonic waveguide. The splitter is designed such that there is a large difference between the effective indices of the TE-polarized modes for the two waveguides, while the effective index difference between the TM-polarized modes are quite small in a wide wavelength range. Numerical results demonstrate that the proposed splitter with a short device length of 5 μm shows extinction ratios as low as ?20 dB with bandwidths as great as 100 nm.     

数值模拟二维间隙表面等离子波导传输特性

利用表面等离子激元的新颖特性,设计了二维间隙表面等离子波导.以这种结构为基础通过变形和组合形成90°直角弯曲波导、T型光功率分配器和光开光,采用时域有限差分法研究了它们的传输特性.结果表明:不同于介质光波导的弯曲损耗来自于辐射泄漏,90°直角弯曲间隙表面等离子波导的能量损耗主要来自于金属中的欧姆热损耗.在间隙达到40 nm以上后,当直行段的长度适当时,弯曲段的透射率较相同长度的直波导的透射率要大.T型光功率分配器在两输出波导的间隙宽度比达到0.6及以上时,不同于传统介质波导的分光原则,能量主要沿等效折射率较小的输出臂流出.当两输入光的相位反相时,T型光开关处于输出截止的状态,当两输入光的相位同相时,T型光开关处于输出导通的状态.所有波导间隙均小于衍射极限,实现了超衍射极限传播,可用于未来了超大规模集成光路中.     

Analyze and calculation of coupling coefficient based on evanescence field for plasmonic directional coupler structure

We obtain the calculation of coupling coefficient of plasmonic directional coupler made up of two monolayer waveguides separated in the range of 200 nm for TM mode and we assume each waveguides acts as a perturbation to other waveguide but does not affect the waveguide mode. We simulation the transfer distance respect to normalized frequency in two directions, x and z, values transfer distance a limitation of a bandwidth is suitable for designing of integrated optical circuits and construction of couplers and switches.     

Numerical characterization of nanopillar photonic crystal waveguides and directional couplers

We numerically characterize a novel type of a photonic crystal waveguide, which consists of several rows of periodically arranged dielectric cylinders. In such a nanopillar photonic crystal waveguide, light confinement is due to the total internal reflection. A nanopillar waveguide is a multimode waveguide, where the number of modes is equal to the number of rows building the waveguide. The strong coupling between individual waveguides leads to the proposal of an ultrashort directional coupler based on nanopillar waveguides. We present a systematic analysis of the dispersion and transmission efficiency of nanopillar photonic crystal waveguides and directional couplers. Plane wave expansion and finite difference time domain methods were used to characterize numerically nanopillar photonic crystal structures both in two- and three-dimensional spaces.