A displacement principle for mercury detection by optical waveguide and surface enhanced Raman spectroscopy

A novel displacement principle of metal nanoparticles for target analysis, differing from the usual target-induced aggregation principle, was proved feasible by the use of para-aminothiophenol coupled Au nanoparticles (PATP-Au) multilayer as probes to detect Hg(2+). The PATP-Au multilayer was fabricated through layer-by-layer assembly of Au nanoparticles on optical waveguide (OWG) chip surface using para-aminothiophenol (PATP) as coupling molecules. The localized surface plasmon resonance (LSPR) extinction from Au nanoparticles and the PATP as a Raman reporter enable to easily capture changes in PATP-Au multilayer by OWG and of surface enhanced Raman spectroscopy, respectively. The introduction of the Hg(2+), which has a higher binding affinity to the thiol group of PATP, greatly destroyed the multilayer structure, and produced a large change, several folds higher than the noise, in LSPR features and Raman signals of PATP-Au multilayer probes, and resulted in an excellent selectivity for Hg(2+) detection at a low level of 1nM. This investigation provides us more ideas on the future development of surface analysis techniques for the detection of various target analytes.     

Photon-driven charge transfer and Herzberg-Teller vibronic coupling mechanism in surface-enhanced Raman scattering of p-aminothiophenol adsorbed on coinage metal surfaces: a density functional theory study

The chemical enhancement effects in surface-enhanced Raman scattering of p-aminothiophenol (PATP, it is also called p-mercaptoaniline or p-aminobenzenthiol) adsorbed on coinage metal surfaces with single thiol end or trapped into metal-molecule-metal junctions with both thiol and amino groups have been studied by density functional theory (DFT). We focus on the influence of photon-driven charge transfer (PDCT) and chemical bonding interaction (ground-state charge transfer) on the intensity enhancement and frequency shift in the surface Raman spectra of PATP. For comparison, the electronic structures and transitions of free PATP are studied first. The simulated pre-resonance UV Raman spectra illustrate that b(2) modes can be selectively enhanced via vibronic coupling. The fundamentals of all the b(2) modes in the frequency range of 1000 to 1650 cm(-1) are assigned in detail. For PATP adsorbed on coinage metals, the time-dependent-DFT calculations indicate that the low-lying CT excited state arises from the π bonding orbital of molecule to the antibonding s orbital of metallic clusters. Our results further show that the PDCT resonance-like Raman scattering mechanism enhances the totally symmetric vibrational modes and the NH(2) wagging vibration. Finally, the effect of chemical bonding interaction is also investigated. The amino group binding to metals gives a characteristic band of the NH(2) wagging mode with the large blueshift frequency and an intense Raman signal.     

Direct adsorption and monolayer self-assembly of acetyl-protected dithiols

The alpha,omega-dithiols, with sulfur-containing groups at both ends of the molecules, can be used to bridge a metallic gap. Functional self-assembled monolayers (SAMs) of these dithiols must "stand up" on the surface and expose one thiol group for further reaction. However, both parallel and upright surface orientations and multilayer formation can occur for alpha,omega-dithiols. We find SAMs deposited directly from acetyl protected dithiols (i.e., with no de-protection step) overcome these problems. We present a systematic study of adsorption kinetics from in situ surface plasmon resonance spectroscopy, X-ray photoelectron spectroscopy, and secondary ion mass spectroscopy of alkane- and oligo(phenylene ethylnylene)-based alpha,omega-dithioacetates on gold.     

Activation of Oxygen on Gold and Silver Nanoparticles Assisted by Surface Plasmon Resonances

Surface plasmon resonances (SPRs) have been found to promote chemical reactions. In most oxidative chemical reactions oxygen molecules participate and understanding of the activation mechanism of oxygen molecules is highly important. For this purpose, we applied surface‐enhanced Raman spectroscopy (SERS) to find out the mechanism of SPR‐assisted activation of oxygen, by using p‐aminothiophenol (PATP), which undergoes a SPR‐assisted selective oxidation, as a probe molecule. In this way, SPR has the dual function of activating the chemical reaction and enhancing the Raman signal of surface species. Both experiments and DFT calculations reveal that oxygen molecules were activated by accepting an electron from a metal nanoparticle under the excitation of SPR to form a strongly adsorbed oxygen molecule anion. The anion was then transformed to Au or Ag oxides or hydroxides on the surface to oxidize the surface species, which was also supported by the heating effect of the SPR. This work points to a promising new era of SPR‐assisted catalytic reactions.     

FT-Raman, FTIR and surface-enhanced Raman spectroscopy of the antiviral and antiparkinsonian drug amantadine

FT-Raman, FTIR and surface-enhanced Raman spectroscopy (SERS) are applied to the vibrational characterization of the antiviral and antiparkinsonian drug amantadine. SERS spectroscopy is employed for the first time for characterizing the interfacial behavior of this molecule and to study its interaction with colloidal silver. The comparison of SERS spectrum with the Raman spectra of amantadine in solid state and in aqueous solution reveals remarkable changes attributed to the interaction of the drug with the metal through the unprotonated amino group and the formation of a self-assembled amantadine layer on the metal surface. A tentative assignment of the obtained vibrational spectra is carried out on the basis of the vibrational spectra of the structurally related molecules adamantane and tert-buthylamine and the ab initio calculations accomplished for amantadine.     

GaAs基底上金纳米粒子的二维组装及其表面增强喇曼散射活性

利用巯基苯胺作耦联分子,成功地将Au纳米粒子组装到GaAs(100)表面上,并且用TM-AFM观察了纳米粒子在表面上的分布情况.Raman研究表明,该基底显示出表面增强喇曼散射活性.     

Highly sensitive Raman spectroscopy using a gap mode plasmon under an attenuated total reflection geometry

We investigated a gap mode plasmon under an attenuated total reflection (ATR) configuration toward realization of near-field Raman spectroscopy with a single molecule sensitivity and spatial resolution. Additional enhancement in Raman scattering at a nanogap was obtained by a coupling of a propagating surface plasmon (PSP) of Ag films on a prism, and a gap mode between Ag films and Ag nanoparticles (AgNPs). Immobilization of AgNPs on Ag films through thiol-SAM slightly up-shifted the resonance angle of a PSP, which broadened the reflectivity dip owing to an increased out-coupling of a PSP. Raman enhancement factor at a nanogap increased with decreasing surface coverage of AgNPs, albeit the enhancement factor averaged over illuminated area in Ag films decreased, ensuring the largest enhancement factor in tip-enhanced Raman scattering. This is due to increased efficiency for a PSP excitation at lower coverage of AgNPs in consistent with that in theoretical evaluation using finite difference time domain calculations. A gap mode under an ATR configuration was applied to elucidate a plausible photochemical reaction of p-amino thiophenol (PATP) adsorbed on Ag films on a prism. Spectral changes in Raman scattering under laser illumination were observed for PATP with a deuterated amino group, but suppressed by a dimethyl amino group owing to steric hindrance, supporting the photochemical dimerization.     

4-氨基苯硫酚在金电极上电化学转变过程的表面增强拉曼光谱及其理论研究

采用循环伏安法和表面增强拉曼散射现场研究了酸性溶液中4-氨基苯硫酚(PATP)在金电极表面的电化学转变过程, 并结合密度泛函理论(DFT)对光谱进行了指认, 由此确定电极表面的最终产物. 研究结果表明, PATP分子在电极表面首先氧化为阳离子自由基, 该自由基与邻近的分子通过头尾相接生成二聚体4'-巯基-N-苯基苯醌二亚胺, 随后发生水解反应生成4'-巯基-N-苯基苯醌单亚胺. 用DFT在B3LYP/6-311＋G** (C, N, S, H)/ LANL2DZ (Au)水平上计算模拟4'-巯基-N-苯基苯醌二亚胺在金表面的拉曼光谱, 结果与所获得的表面拉曼光谱较好吻合, 平均相对偏差约为2.1%.     

复合SERS基底的构建及性质

通过自组装方法以对巯基苯胺(PATP)为偶联分子, 在石英基片上构筑了多种形貌的银钠米粒子单层结构和三明治结构. 研究了组装膜在不同激发线下表面增强拉曼散射(SERS)的增强差异. 研究结果表明, 单层基底和三明治基底中偶联分子的SERS信号因银纳米粒子间的电磁场耦合而显著增强, 且在三明治结构中增强更加明显. 对复合SERS基底增强因子进行计算可知, 复合SERS基底的表面等离子体共振(SPR)峰与激发线的匹配程度越好, 其增强因子越大. 在三明治结构中更易发生PATP分子转变为对巯基偶氮苯(DMAB)分子的激光诱导催化偶联反应. 另外, 该激光诱导催化偶联反应与激发波长密切相关.     

金纳米粒子组装体系SERS化学增强的研究

Gold nanoparticles were assembled on gold substrates with the self-assembled monolayer(SAM) of p-minothiophenol(PATP). AFM measurements disclose that gold nanoparticles are scattered over the surface of the substrate with a submonolayer coverage. The Raman signal of the coupling layer, the SAM of PATP, can be well observed. Potential-dependent measurements were performed to study the chemical enhancement in SERS of such a system. Based on the supposition that the direction of charge transfer is from gold nanoparticles to PATP, it is deduced that Herzberg-Teller contribution has ruled in the SERS of such a system.     

Adsorption kinetics of L-glutathione on gold and structural changes during self-assembly: an in situ ATR-IR and QCM study

The adsorption of L-glutathione (gamma-Glu-Cys-Gly) from ethanol on gold surfaces was studied in situ by both attenuated total reflection infrared (ATR-IR) spectroscopy and using a quartz crystal microbalance (QCM). The molecule is firmly anchored to the gold surface through the thiol group. Different IR signals of adsorbed L-glutathione, notably the amide I and nu(-COOH), show significantly different behavior with time, which reveals that their increase is not related to adsorption (mass uptake) alone. This indicates that structural transformations take place during the formation of the self-assembled monolayer (SAM). In particular, the intensity of the acid signal increases quickly only within the first couple of minutes. The complexity of the self-assembling process is confirmed by QCM measurements, which show fast mass uptake within about 100 s followed by a considerably slower regime. The structural change superimposed on the mass uptake is, based on the in situ time-resolved ATR-IR measurements, assigned to the interaction of the acid group of the Gly moiety with the surface. The latter group is protonated in ethanol but deprotonates upon interaction with the gold surface. The protonation-deprotonation equilibrium is sensitive to external stimuli, such as the presence of dissolved L-glutathione molecules. The interaction of the acid group with the surface and concomitant deprotonation proceeds via two distinguishable steps, the first being a reorientation of the molecule, followed by the deprotonation.     

Two-dimensional molecular imprinting approach to produce optical biosensor recognition elements

This article describes a new two-step methodology for preparing thiol monolayers having artificial recognition sites for dansylated amino acids on gold optical biosensor surfaces. Nepsilon-Dansyl-L-lysine (DK) was used as the template molecule to form molecularly imprinted monolayers (MIMs). Impact factors that were studied were the concentration of DK in step one (template deposition) and the time and method for thiol monolayer formation in step two (backfilling). Compared to a prior method that used the simultaneous adsorption of the template and thiol from solution, this new approach provides the flexibility to imprint template molecules that have low binding energies on gold. Control over the surface density of imprinting sites can be achieved by this approach, and rebinding studies done using surface plasmon resonance spectroscopy confirmed that the MIMs prepared against DK showed selectivity for that template over didansyl-L-lysine.     

Determination of the Degree of Charge‐Transfer Contributions to Surface‐Enhanced Raman Spectroscopy

We explore the application of a previously suggested formula for determining the degree of charge transfer in surface‐enhanced Raman scattering (SERS). SERS is often described as a phenomenon which obtains its enhancement from three major sources, namely the surface plasmon resonance, charge‐transfer resonances as well as possible molecular resonances. At any chosen excitation wavelength, it is possible to obtain contributions from several sources and this has led to considerable confusion. The formula for the degree of charge transfer enables one to separate these effects, but it requires that spectra be obtained either at two or more different excitation wavelengths or as a function of applied potential. We apply this formula to several examples, which display rather large charge‐transfer contributions to the spectrum. These are p‐aminothiophenol (PATP), tetracyano‐ ethylene (TCNE) and piperidine. In PATP we can show that several lines of the same symmetry give the same degree of charge transfer. In TCNE we are able to identify the charge‐transfer transition, which contributes to the effect, and are able to independently determine the degree of charge transfer by wavenumber shifts. This enables a comparison of the two techniques of measurement. In piperidine, we present an example of molecule to metal charge transfer and show that our definition of charge transfer is independent of direction.     

Self-assembly of gold nanoparticles to carbon nanotubes using a thiol-terminated pyrene as interlinker

Gold nanoparticles were self-assembled onto the surface of solubilized carbon nanotubes through an interlinker of bi-functionalized molecule (PHT) terminated with pyrenyl unit at one end and thiol group at the other end. While the fluorescence of PHT is quenched moderately by the carbon nanotubes, the fluorescence is almost totally quenched by the further binding of gold nanoparticles. The enhancement of the Raman responses of nanotubes by the gold nanoparticles is also observed. These results imply there are charge transfer interactions between nanotubes and gold nanoparticles.     

Electroactive self-assembled monolayers of unique geometric structures by using rigid norbornylogous bridges

Herein, we describe the synthesis of straight (S) and L-shaped (L) norbornylogous bridges (NBs) with an anthraquinone moiety at the distal end as the redox-active head group and two thiol feet at the proximal end, by which the molecules assemble on gold surfaces. The NB molecules were shown to form self-assembled monolayers (SAMs) with a well-behaved surface redox process. The SAMs were characterized by using in situ IR spectroscopy, cyclic voltammetry, scanning tunnelling microscopy and electrochemical impedance spectroscopy. The surface selection rules associated with the IR band intensities allowed the estimation of the position of the anthraquinone moiety with respect to the surface and the tilt of the bridge with respect to the surface normal, both in pure and diluted monolayers. It is shown that the S- and L-NBs hold the plane of the anthraquinone moiety close to the surface normal or the surface tangent, respectively. Neither NB molecule changes its orientation if spaced by diluents on the surface. The difference in the structure of the S- and L-NB SAMs provides a suitable framework for the investigation of factors that govern electron transfer of anthraquinone moieties across self-assembled monolayers with limited structural ambiguity, as compared with the commonly used structurally flexible alkanethiol monolayers.     

自组装DNA吸附取向的表面增强拉曼光谱法研究

对金基体上自组装寡聚核苷酸探针杂交前后进行电化学非现场及现场表面增强拉曼光谱(SERS)研究.非现场SERS研究表明,杂交形成的dsDNA在基体表面以A型和B型两种构象同时存在,杂交过程可能伴随DNA链在基体表面吸附取向的变化.根据现场SERS研究结果可知,ssDNA及dsDNA的大多数SERS谱带强度随电极电位正移而降低,尤其是归属于碱基A的两种面外振动模式,谱带变化更为明显.利用SERS表面选择定则判断出随着电极电位由负向正变化,ssDNA及dsDNA螺旋吸附取向由垂直吸附向平躺吸附于金基体表面变化.     

Adsorption mechanism and acidic behavior of naphthazarin on Ag nanoparticles studied by Raman spectroscopy

Surface-enhanced Raman scattering (SERS) spectroscopy is applied in this work to the study of the adsorption of naphthazarin (NZ) on Ag nanoparticles. Spectra recorded at different excitation wavelengths and pHs revealed that this molecule is adsorbed on the metal through several mechanisms. Two main types of adsorbed molecules can be identified that correspond to neutral and ionized NZ, which may be physisorbed or chemisorbed on the metal. The existence of these different forms can be due to different binding sites on the surface or to the formation of a multilayer architecture on the metal surface giving rise to different adsorbate states. Although the amount of the ionized molecule attached on the surface is higher at neutral pH, the neutral molecule may also exist even at very high pH. The amount of neutral NZ increases with the time and also as the NZ concentration is raised or as the dimethylsulfoxide (DMSO) concentration existing in the medium is increased.     

Structure of tert-butyl carbamate-terminated thiol chemisorbed to gold

Monolayers of tert-butyl carbamate-terminated thiol were formed by adsorption of the molecules onto polycrystalline gold substrate. The adsorbates were studied using techniques as X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and infrared reflection-absorption spectroscopy (IRAS). The results provide the electronic structure, composition, characteristic fingerprint, and orientation of the molecular adsorbate. XPS verified that the thiolate group is chemically bonded to the gold surface and that a complete chemisorption of the molecule occurs. Elemental depth profiling by varying the excitation energy in XPS supports the angle-dependent XPS results. Both techniques showed that the tert-butyl group is oriented away from the gold surface. A nearly parallel orientation of the carbonyl group relative to the gold surface is deduced from the IRAS results. The main molecular axis is estimated to have an average tilt angle of about 38 degrees relative to the gold surface normal on the basis of the NEXAFS results. Cyclic voltammetry indicates a less blocking capability of the adsorbates. Overall, the molecules are oriented in an upright manner with indications of presence of pinholes and/or defects possibly due to steric hindrance of the bulky tert-butyl group. This molecular system is envisioned to be of use for surface-based organic synthesis on gold substrates.     

Two-dimensional crystal structure of a quaterthiophene-alkanethiol self-assembled monolayer on gold

We investigated the fine structure of a self-assembled monolayer of dodecanethiol functionalized by alpha-quaterthiophene on gold (alpha-4TC 12H 24SH). The molecular orientation, quantified using polarization modulation infrared reflection-absorption spectroscopy, was studied as a function of the adsorption time. The alpha-4T moieties arrange in the upright position on the surface as the adsorption time increases, while the alkyl chain organization remains poor. Here we quantify the orientation of the self-assembled monolayer and, more significantly, reveal through surface X-ray diffraction that after a long incubation period (12 h) the alpha-4T on the gold surface adopts a 2D crystal structure.     

Oxadiazole‐2‐thiol Adsorption on Gold Nanorods: A Joint Theoretical and Experimental Study by Using SERS,XPS, and DFT

The chemisorption of 1,3,4‐oxadiazole‐2‐thiol (ODT) on gold nanorods has been investigated by using surface‐enhanced Raman spectroscopy (SERS) and density functional theory (DFT). Although most of the SERS spectra have remarkable similarity to the normal Raman spectra of the pure analyte, the adsorption of ODT on a gold surface leads to a drastic change in its Raman spectrum and distinct vibrational features are obtained with gold nanorods and spherical nanoparticles. Simulated Raman spectra for hybrid systems that consist of an oxadiazole moiety coordinated to a Au₂₀ gold cluster provided valuable information about the coordination mode and enabled us to assign vibration modes.