α-Fe2O3形貌对Au/α-Fe2O3催化一氧化碳氧化反应性能的影响

负载型纳米金催化剂由于其独特的化学性质在一系列氧化反应中受到广泛关注.其中,一氧化碳氧化不仅在实际应用领域(如汽车尾气处理)发挥重要作用,而且作为一种理想的模型反应用以深入研究和理解催化剂的构效关系.为了获得高效的纳米金催化剂,我们需要把金负载到载体上,载体不仅为金的分散提供必要的表面,而且还会和金产生相互作用,这种金...     

Gold catalysts supported on ZnO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for low-temperature CO oxidation

Gold catalysts with loadings ranging from 0.5 to 7.0 wt% on a ZnO/Al₂O₃ support were prepared by the deposition–precipitation method (Au/ZnO/Al₂O₃) with ammonium bicarbonate as the precipitation agent and were evaluated for performance in CO oxidation. These catalysts were characterized by inductively coupled plasma-atom emission spectrometry, temperature programmed reduction, and scanning transmission electron microscopy. The catalytic activity for CO oxidation was measured using a flow reactor under atmospheric pressure. Catalytic activity was found to be strongly dependent on the reduction property of oxygen adsorbed on the gold surface, which related to gold particle size. Higher catalytic activity was found when the gold particles had an average diameter of 3–5 nm; in this range, gold catalysts were more active than the Pt/ZnO/Al₂O₃ catalyst in CO oxidation. Au/ZnO/Al₂O₃ catalyst with small amount of ZnO is more active than Au/Al₂O₃ catalyst due to higher dispersion of gold particles.     

Promoting Effects of Iron on CO Oxidation over Au/TiO2 Supported Au Nanoparticles

Fe-doped TiO₂ supported gold nanoparticles as high-performance CO oxidation catalysts were prepared. XRD data revealed that TiO₂ support was in an anatase phase. After calcination at 300℃, the sample showed nanotube structure, and the size of gold nanoparticles was 3.1 nm. When calcined at 500℃, most nanotubes broke, and gold nanoparticles grew up to 5.9 nm. XPS spectrum indicated the presence of Fe in the +3 oxidation state. Au/Fe-TiO₂(Au:1.44%, Fe:1.35%) calcined at 300℃ possessed the best catalytic activity, and it could completely convert CO at 25℃. The temperature of 100% CO conversion(T_100%) of Fe-free catalyst was 40℃. After the catalysts were stored at room temperature for 7 d, T_100% of Au/Fe-TiO₂ increased from 25℃ to 30℃, while T_100% of Fe-free catalyst increased from 40℃ to 80℃. The catalytic activity and storage stability of Au/TiO₂ could be improved by Fe-doping. The increase of specific surface area, generation of oxygen vacancies and new adsorption sites, depression of the growth of gold nanoparticles, and strong metal-support interaction were responsible for the promoting effect of iron on the catalytic performance of Au/TiO₂ for CO oxidation.     

Au/CeO2/SiO2催化CO低温氧化反应过程中CeO2的作用（英文）

采用具有分等级孔道结构的SiO2(HMS)为载体,通过润湿浸渍引入少量CeO2,经焙烧得到CeO2/HMS复合载体,然后采用沉积沉淀法负载上Au纳米粒子,得到Au/CeO2/HMS三元复合催化剂.通过X射线衍射、程序升温还原和原位红外光谱等手段表征了催化剂的结构.结果表明,CeO2的存在可控制Au颗粒的沉积并稳定载体上的纳米Au颗粒.Au/CeO2/HMS上CO低温氧化反应完全转化温度为60oC.高度分散的Au0可以活化CO,CeO2颗粒则可以提供反应需要的氧.稳定性测试结果显示,反应48h催化剂活性维持不变.     

氮化硼负载的高分散Au-CuOx纳米颗粒用于低温CO氧化

负载型金催化剂显示出高的低温CO氧化活性,其催化性能与载体的性质密切相关.近年来,六方氮化硼作为一种新型催化材料引起了极大关注.已有研究表明,二维结构的氮化硼纳米片有利于传质扩散,并且暴露出大量的表面和边缘,作为新型非金属催化剂在烷烃氧化脱氢中表现出优异的活性.同时,CO氧化反应是强放热过程,氮化硼具有优良的导热性能,...     

Inhibition at perimeter sites of Au/TiO2 oxidation catalyst by reactant oxygen

TiO(2)-supported gold nanoparticles exhibit surprising catalytic activity for oxidation reactions compared to noble bulk gold which is inactive. The catalytic activity is localized at the perimeter of the Au nanoparticles where Au atoms are atomically adjacent to the TiO(2) support. At these dual-catalytic sites an oxygen molecule is efficiently activated through chemical bonding to both Au and Ti(4+) sites. A significant inhibition by a factor of 22 in the CO oxidation reaction rate is observed at 120 K when the Au is preoxidized, caused by the oxygen-induced positive charge produced on the perimeter Au atoms. Theoretical calculations indicate that induced positive charge occurs in the Au atoms which are adjacent to chemisorbed oxygen atoms, almost doubling the activation energy for CO oxidation at the dual-catalytic sites in agreement with experiments. This is an example of self-inhibition in catalysis by a reactant species.     

预处理条件对Au/ZnO催化剂CO氧化性能的影响

采用沉积沉淀法制备了用于CO氧化的Au/ZnO催化剂, 并用程序升温还原(TPR), X射线衍射(XRD)和透射电镜(TEM)技术对催化剂进行了表征. 结果表明: 采用沉积沉淀法可制备出高度分散的Au/ZnO催化剂; 提高焙烧温度导致金颗粒聚集长大, 样品经533, 673, 773 K焙烧后金物种的颗粒尺寸分别为2.7, 3.5, 3.7 nm. 催化剂的TPR表征结果中发现部分还原态的金物种在室温就可被氧化, 催化剂预先用流动空气处理可提高其氧化还原性, 样品经多次氧化还原循环后, 其氧化循环性能没有明显下降. CO的氧化反应结果表明, 焙烧温度强烈影响催化剂对CO的氧化活性, 533 K焙烧后的催化剂活性最高. 即使在反应气中含水3.1%(体积比)的湿气条件下, 反应300 h后, CO的转化率仍然保持在95%.     

CeO2 nanorods and gold nanocrystals supported on CeO2 nanorods as catalyst

The formation mechanism of uniform CeO2 structure at the nanometer scale via a wet-chemical reaction is of great interest in fundamental study as well as a variety of applications. In this work, large-scale well-crystallized CeO2 nanorods with uniform diameters in the range of 20-30 nm and lengths up to tens of micrometers are first synthesized through a hydrothermal synthetic route in 5 M KOH solution at 180 degrees C for 45 h without any templates and surfactants. The nanorod formation involves dehydration of CeO2 nanoparticles and orientation growth along the 110 direction in KOH solution. Subsequently, gold nanoparticles with crystallite sizes between 10 and 20 nm are loaded on the surface of CeO2 nanorods using HAuCl4 solution as the gold source and NaBH4 solution as a reducing agent. The synthesized Au/CeO2 nanorods demonstrate a higher catalytic activity in CO oxidation than the pure CeO2 nanorods.     

金属载体强相互作用增强Au/TiO2催化剂在3-硝基苯乙烯选择性加氢反应的活性

自Haruta与Hutchings于上世纪八十年代末发现金纳米催化剂优异的反应活性以来,科研人员对金催化的应用领域进行了广泛而深入地研究.对金催化科学和应用领域的研究一直在进行.大量的研究表明,金催化剂在各种选择性氧化反应中具有优异的催化性能(高活性和高选择性).然而,在催化加氢反应中,尽管金催化剂相比于铂族金属显示出优越的选择性,但是由于金催化剂选择性加氢反应的活性较差,使其在选择性催化加氢反应中的应用受到了极大的限制.研究表明,金催化剂较弱的活化氢气能力是其催化加氢反应活性低的主要原因.研究发现,氢气活化的活性中心可能是界面、负价金、低配位的金原子等.金催化剂具有明显的载体效应,金属-载体之间的相互作用能够显著地改变金催化剂的催化性能.Tauster等研究发现,铂族金属与还原性载体之间存在强相互作用,能够引发载体包覆金属表面,并且使得电子从载体向金属迁移,导致金属带负电.受金属-载体强相互作用(SMSI)效应的启发,本文探究了Au/TiO2催化剂中SMSI对金催化剂加氢性能的影响.在H2或O2气氛下高温焙烧Au/TiO2,获得一系列金催化剂(Au/TiO2-TA,T为焙烧温度(oC):300、400、500和600;A为气氛:H2或O2).对比在3-硝基苯乙烯(3-NS)选择性加氢反应中的活性发现,Au/TiO2-500H的TOF值是Au/TiO2-500O的3.3倍;动力学测试表明,Au/TiO2-500H和Au/TiO2-500O的反应表观活化能分别为79.5和105.1 kJ/mol.这表明两类催化剂催化活性中心的结构存在差异.X射线光电子能谱测试结果表明,Au/TiO2-H样品中Au带部分负电,而Au/TiO2-O中Au显示为金属态.HAADF-STEM和EELS显示,Au/TiO2-H中Au NPs的表面有TiOx物种,增加了Au-TiO2的界面.EPR结果表明,Au/TiO2-H中存在表面Ti3+物种,而Au/TiO2-O样品中则没有.为确认加氢反应的活性中心到底是界面还是负价金物种,本文探究了不同温度下氢气处理的Au/TiO2的结构与性能的关系,发现Au/TiO2-300H/400H/500H催化剂都显示出较好的催化3-NS加氢活性,而Au/TiO2-600H虽然具有更多的负价金物种,但是3-NS选择性加氢反应的活性反而降低,因此,负价金不是活性中心.这是因为不同温度处理的Au/TiO2-H样品中,SMSI的强弱不同,在300、400、500 oC下,SMSI能够增加Au-TiO2的界面长度,从而增强了3-NS加氢反应的活性;而温度达到600 oC,SMSI效应太强,Au NPs被包覆更密实,导致Au/TiO2-600H的3-NS选择性加氢反应的活性下降.密度泛函理论计算表明,Au/TiO2-H样品具有更低的H2解离活化能以及氢转移活化能.氢氘交换反应也进一步验证了SMSI有利于H2的活化.     

沉淀剂对AU/ZnO催化剂CO氧化性能及催化剂结构的影响

在25 C和进料中含水条件下,考察了由Na2CO3,(NH4)2CO3,NaOH和NH4OH等4种沉淀剂制备的Au/ZnO催化剂上CO氧化活性和稳定性.结果表明,沉淀剂影响Au/ZnO催化剂的前体组成、金粒子和ZnO粒子大小、比表面积及CO氧化性能.由NH4OH制备的Au/ZnO催化剂活性和稳定性较差,CO转化率只有15%;由其它3种沉淀剂制备的Au/ZnO催化剂的CO氧化活性和稳定性明显改善,可至少连续反应1 100 h,且保持CO完全氧化,其中Na2CO3是最佳沉淀剂.在反应过程中反应气氛可引起金粒子的聚集及在催化剂表面生成新的碱式碳酸锌物相.催化剂的稳定性与金粒子长大速度和碳酸根累积量有关.     

The nature of the oxidation states of gold on ZnO

The interaction between gold in the 0, i, ii and iii oxidation states and the zinc-terminated ZnO(0001) surface is studied via the QM/MM electronic embedding method using density functional theory. The surface sites considered are the vacant zinc interstitial surface site (VZISS) and the bulk-terminated island site (BTIS). We find that on the VZISS, only Au(0) and Au(i) are stable oxidation states. However, all clusters of i to iii oxidation states are stable as substitutionals for Zn2+ in the bulk terminated island site. Au(OH)(x) complexes (x= 1-3) can adsorb exothermically onto the VZISS, indicating that higher oxidation states of gold can be stabilised at this site in the presence of hydroxyl groups. CO is used as a probe molecule to study the reactivity of Au in different oxidation states in VZISS and BTIS. In all cases, we find that the strongest binding of CO is to surface Au(i). Furthermore, CO binding onto Au(0) is stronger when the gold atom is adsorbed onto the VZISS compared to CO binding onto a gas phase neutral gold atom. These results indicate that the nature of the oxidation states of Au on ZnO(0001) will depend on the type of adsorption site. The role of ZnO in Au/ZnO catalysts is not, therefore, merely to disperse gold atoms/particles, but to also modify their electronic properties.     

Surface-plasmon-enhanced band emission of ZnO nanoflowers decorated with Au nanoparticles

A simple strategy was used to enhance band emission through the transfer of defect emission from ZnO to Au by using the energy match between the defect emission of ZnO and the surface plasmon absorbance of Au NPs through decorating the surface of ZnO nanoflowers with Au nanoparticles (Au NPs). The ZnO nanostructure, which was comprised of six nanorods that were attached on one side in a flower-like fashion, was synthesized by using a hydrothermal method. The temperature-dependent morphology and detailed growth mechanism were studied. The influence of the density of the Au NPs that were deposited onto the surface of ZnO on photoluminescence was investigated to optimize the configuration of the ZnO/Au system in terms of the maximum band emission. The sequential transfer of defect energy from ZnO to Au and electron transfer from excited Au to ZnO was proposed as a possible mechanism for the enhanced band emission.     

Surface‐Plasmon‐Enhanced Band Emission of ZnO Nanoflowers Decorated with Au Nanoparticles

A simple strategy was used to enhance band emission through the transfer of defect emission from ZnO to Au by using the energy match between the defect emission of ZnO and the surface plasmon absorbance of Au NPs through decorating the surface of ZnO nanoflowers with Au nanoparticles (Au NPs). The ZnO nanostructure, which was comprised of six nanorods that were attached on one side in a flower‐like fashion, was synthesized by using a hydrothermal method. The temperature‐dependent morphology and detailed growth mechanism were studied. The influence of the density of the Au NPs that were deposited onto the surface of ZnO on photoluminescence was investigated to optimize the configuration of the ZnO/Au system in terms of the maximum band emission. The sequential transfer of defect energy from ZnO to Au and electron transfer from excited Au to ZnO was proposed as a possible mechanism for the enhanced band emission.     

Regulation of Strong Metal-Support Interaction by Alkaline Earth Metal Salts

Classical strong metal-support interaction (SMSI) is of significant importance to heterogeneous catalysis, where electronic promotion and encapsulation of noble metal by reducible support are two main intrinsic properties of SMSI. However, the excessive encapsulation will inevitably hamper the contact between active sites and reactant, leading to reduced activity in catalysis. Herein, alkaline earth metal salts are employed to depress the encapsulation of Ru nanoparticles in Ru/TiO₂ catalyst in the present study. Thermodynamic calculation, transmission electron microscopy (TEM) and chemisorption results show that the alkaline earth metal salts could successfully prevent the migration of TiO_2-x overlayer to Ru nanoparticles in Ru/TiO₂ catalyst via in situ formation of titanates, resulting in high exposure of active metal. Meanwhile, X-ray photoelectron spectroscopy (XPS) and hydrogen temperature-programmed reduction (H₂-TPR) results reveal that an even stronger electron donation from the reduced support to Ru nanoparticles is achieved. As a result, the alkaline earth metal salts-doped Ru/TiO₂ catalysts exhibit superior activity in catalytic hydrogenation of aromatics, which is in contrast to the pristine Ru/TiO₂ catalyst that shows negligible activity under the same conditions due to the excess encapsulation of Ru nanoparticles in Ru/TiO₂ catalyst.     

Support effect in high activity gold catalysts for CO oxidation

In this work, we present a detailed study concerning the evaluation of the metal-support interaction in high activity gold catalysts for CO oxidation. Using the colloidal deposition method, model catalysts were prepared, which allow the isolation of the effect of the support on the catalytic activity. Prefabricated gold particles were thus deposited on different support materials. Since the deposition process did not change the particle sizes of the gold particles, only the influence of the support could be studied. TiO2, Al2O3, ZrO2, and ZnO were used as support materials. Catalytic tests and high resolution transmission electron microscopy clearly show that the support contributes to the activity. However, our results are not in line with the distinction between active and passive supports based on the semiconducting properties of the oxidic material. The most active catalysts were obtained with TiO2 and Al2O3, while ZnO and ZrO2 gave substantially less active catalysts. Furthermore, the effect of other important parameters on the catalytic activity (i.e., particles size distribution, calcination temperature, and aging time for a Au/TiO2 catalyst) has also been studied. Using this preparation route, the catalysts show high-temperature stability, size dependent activity, and a very good long-term stability.     

Gold nanoparticles deposited on SiO2/Si100: correlation between size,electron structure,and activity in CO oxidation

Nanosize gold particles were prepared by Ar(+) ion implantation of 10-nm thick gold film deposited onto a SiO(2)/Si(100) wafer possessing no catalytic activity in the CO oxidation. Along with size reduction the valence band of the gold particles and the actual size were determined by ultraviolet- and X-ray photoelectron spectroscopy (UPS, XPS) and by transmission electron microscopy (TEM) as well as atomic force microscopy (AFM), respectively. The catalytic activity was determined in the CO oxidation. Energy distribution of the photoelectrons excited from 5d valence band of gold was strongly affected by Ar(+) implantation. This variation was interpreted by the redistribution of the valence band density of states (DOS). The intrinsic catalytic activity of the gold particles increased with decreasing size. When an Au/FeO(x) interface was created by FeO(x) deposition on large gold nanoparticles, a significant increase in the rate of the CO oxidation was observed. These data can be regarded as an experimental verification of the correlation between the catalytic activity and valence band density of states of gold.     

Au/ZnO催化剂的制备及常温常湿条件下CO氧化催化性能

用共沉淀法制备了n(Au)/n(ZnO)=1.3/100的催化剂.考察了焙烧温度对Au/ZnO催化剂的化学组成及CO氧化性能的影响.结果表明,焙烧温度对催化剂的化学组成、活性和稳定性均有较大影响,其中240℃焙烧制得的Au/ZnO催化剂稳定性最好,在25℃和进料中含有水分的条件下,可连续反应600h使CO完全转化.XRD,FTIR,TG-DTA,TEM及UV-Vis结果表明,金粒子高度分散在氧化锌或碳酸锌上,平均直径2～5nm.催化剂的稳定性同锌物种有关,氧化锌较碳酸锌表现出较好的稳定性,且氧化锌粒子越小,比表面积越大,催化剂的稳定性越高.     

金催化一氧化碳氧化反应中锌锡复合氧化物的载体效应

氧化物负载的纳米金催化剂对CO氧化反应具有极高的活性,这不仅依赖于金的结构特性,也取决于氧化物载体的结构.近年来,除了氧化硅、氧化铝等惰性载体以及氧化钛、氧化铈、氧化铁等可还原性载体外,人们还致力于探索各类新型氧化物载体.另一方面,锡酸锌是具有反尖晶石结构的化合物,并且在透明导电氧化物、锂离子电池阳极材料、光电转换装置以及传感器等方面应用广泛.然而,迄今为止,锡酸锌仍未被用于负载纳米金催化剂,因此相关的构效关系作用研究也十分有限.基于此,本文采用氮气吸附-脱附实验、电感耦合等离子体原子发射光谱(ICP-AES)、X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和高分辨电镜(HRTEM)、高角环形暗场像-扫描透射电子显微镜(HAADF-STEM)、X射线吸收精细结构谱(XAFS)和氢气程序升温脱附(H2-TPD)等手段,系统研究了锡酸锌负载的纳米金催化剂在CO氧化反应中催化性能差异的原因.首先,利用水热法制备了锡酸锌(ZTO)载体,而其织构性质可由碱(N2H4·H2O)与金属离子(Zn2+)的比例在4/1(ZTO_1)、8/1(ZTO_2)和16/1(ZTO_3)之间进行调节.结果发现, ZTO_2具有最大的孔体积(0.223 cm3/g)和最窄的孔径分布.再采用沉积沉淀法将0.7 wt% Au负载于其上,得到金-锡酸锌(Au_ZTO)催化剂. ICP-AES测得样品中Au含量在0.57-0.59 wt%,与投料比接近. CO氧化反应结果显示, Au_ZTO_1和Au_ZTO_2的表观活化能相同,但后者的活性更高;而Au_ZTO_3在220°C以下没有活性,催化性能最差,与纯锡酸锌载体相当. XRD结果显示,反应过程中ZTO晶相、晶胞参数及晶粒尺寸变化不明显; TEM和HRTEM分析表明,载体ZTO在反应前后均为多面体形貌,平均颗粒尺寸在12-16 nm; XPS结果验证了Zn2+和Sn4+离子是新鲜和反应后样品中载体金属的存在形式; HAADF-STEM探测到所有样品中均含有1-2 nm的Au粒子; XAFS结果表明, Au以Au0形式存在,并且在Au_ZTO_3中Au平均粒径大于4 nm,而其它两样品约为2 nm. H2-TPR结果表明,金的引入对ZTO载体耗氢量影响不大,但还原峰温度向低温移动;金属-载体相互作用强弱与催化活性高低具有正相关性,即Au_ZTO_2> Au_ZTO_1>> Au_ZTO_3.这是由于不同织构性质的锡酸锌载体对于纳米金活性物种的稳定作用不同所致,具有最大孔体积和最窄孔径分布的ZTO_2负载的金纳米颗粒表现出最高活性.     

氧化铈促进的高效Au/Al2O3催化剂制备及其催化CO选择氧化反应性能

近年来,伴随全球能源危机的加剧,以及温室效应和细颗粒物等一系列环境问题出现,各国研究者正努力寻求和开发可持续利用的新能源来代替传统的化石能源.燃料电池具有能量转化效率高、对环境排放低和污染小等优点,作为一种新的环境友好型技术而广受关注.在众多的燃料电池中,质子交换膜燃料电池(PEMFC)因具有能量效率高和工作窗口温度
　　低等优势而备受关注.但是, PEMFC燃料以H2为主,主要来源是烃类的重整气,但其中痕量的CO (10 ppm)将会引起Pt电极中毒,导致PEMFC性能迅速下降,因此如何有效地祛除富氢气体中的CO并尽可能减少H2的消耗具有重要研究价值.目前, CO选择氧化法(CO-PROX)是公认的最简单、廉价和有效的办法之一. CO的消除通常选用霍加拉特催化剂,虽然Cu基催化剂具有低廉的成本和较好的CO催化氧化性能,但是当反应中有H2O和CO2存在时,其活性会迅速下降. Au催化剂具有优异的低温CO催化氧化性能,但在PEMFC的工作温度窗口为80–120oC时,随着反应温度提高, H2与CO之间的竞争吸附变强,采用单组分Au催化剂难于在80–120 oC内使CO完全氧化.因此,设计并制备高效的Au催化剂来提高其在PEMFC工作温度(80–120 oC)条件下CO-PROX反应活性和选择性仍然是目前该方向的难点.氧化铈(CeO2)是一种重要的稀土化合物,由于Ce具有独特的4f电子层结构, Ce3+/Ce4+在一定条件下可以相互转化,具有较高的储放氧能力,即能够在富氧条件下储存氧,在贫氧条件下释放氧. CeO2是一种重要的氧化反应催化剂载体,是三效催化剂的主要组成部分,在净化汽车尾气方面稀土元素具有独特的优势,广泛应用于CO氧化和NOx消除等领域中.最近,本课题组以自制的氧化铝为载体,制备了K掺杂的Au-Cu/Al2O3催化剂,其在CO-PROX反应中具有较好的催化活性和稳定性.本文在此基础上,利用Au与CeO2之间的相互作用,制备了CeO2掺杂的Au/CeO2/Al2O3催化剂和K掺杂的Au-Cu/CeO2/Al2O3催化剂.表征结果发现,催化剂中Au和Au-Cu纳米粒子的尺寸均一,平均粒径分别为2.4±0.4和2.8±0.4 nm.与Au/Al2O3催化剂相比, Ce掺杂的Au催化剂具有更高的金属分散度,拓宽了其CO完全转化时的反应温度窗口(30–70 oC).对所制备的Au催化剂进一步通过拉曼光谱、H2程序升温还原和CO-红外光谱等手段分析和CO-PROX催化性能测试,可以证实Au-Cu/CeO2/Al2O3催化剂中各组分在CO-PROX反应中所起的作用.结果表明, CeO2的掺杂能增强活性组分与载体之间的相互作用,有助于提高Au-Cu纳米粒子的分散度,此外还能提高Au催化剂的还原性能,其表面形成的氧空位提高了CO-PROX反应的催化性能. Cu物种的引入显著增强了CO在Au催化剂上吸附能力.综上所述, CeO2组分对Au/Al2O3催化剂的促进作用体现在：(1)有效锚定Au和Au-Cu纳米粒子;(2)提供CO-PROX反应中的活性氧物种.     

单晶Au表面和Au/TiO2（110）模型催化剂表面CO氧化反应机理和活性位

在分子尺度上介绍了Au/TiO2(110)模型催化剂表面和单晶Au表面CO氧化反应机理和活性位、以及H2O的作用.在低温(<320 K), H2O起着促进CO氧化的作用, CO氧化的活性位位于金纳米颗粒与TiO2载体界面(Auδ+–Oδ––Ti)的周边. O2和H2O在金纳米颗粒与TiO2载体界面边缘处反应形成OOH,而形成的OOH使O–O键活化,随后OOH与CO反应生成CO2.300 K时CO2的形成速率受限于O2压力与该反应机理相印证.相反,在高温(>320 K)下,因暴露于CO中而导致催化剂表面重组,在表面形成低配位金原子.低配位的金原子吸附O2,随后O2解离,并在金属金表面氧化CO.