Kinetics of formation of barium tungstate in equimolar powder mixture of BaCO<Subscript>3</Subscript> and WO<Subscript>3</Subscript>

The formation of Barium monotungstate (BaWO₄) particles in equimolar powder mixtures of BaCO₃ and WO₃ was examined under isothermal and non-isothermal conditions upon heating in air at 25–1200 °C, using thermogravimetry. Concurrence of the observed mass loss (due to the release of CO₂) to the occurrence of the formation reaction was evidenced. Accordingly, the extent of reaction (x) was determined as a function of time (t) or temperature (T). The x–t and x–T data thus obtained were processed using well established mathematical apparatus and methods, in order to characterize nature of reaction rate-determining step, and derive isothermal and non-isothermal kinetic parameters. Moreover, the reaction mixture quenched at various temperatures (600–1,000 °C) in the reaction course was analyzed by various spectroscopic and microscopic techniques, for material characterization. The results obtained indicated that the reaction rate may be controlled by unidirectional diffusion of WO₃ species across the product layer (BaWO₄), which was implied to form on the barium carbonate particles. The isothermally determined activation energy (118–125 kJ/mol) was found to be more credible than that (245 kJ/mol) determined non-isothermally.     

The enthalpies and dissociation constants of L-homoserine in aqueous solutions of KNO<Subscript>3</Subscript>

Acid-base interactions in solutions of L-homoserine were studied potentiometrically and calorimetrically. The constants and heat effects of the step dissociation of the amino acid at 298.15 K and ionic strengths of 0.1, 0.3, 0.5, and 1.0 (KNO₃) were determined. The standard thermodynamic characteristics of the equilibria studied were calculated.     

Isopiestic Determination of Water Activity on the System LiNO<Subscript>3</Subscript>+KNO<Subscript>3</Subscript>+H<Subscript>2</Subscript>O at 273.1 and 298.1 K

Water activities in the ternary LiNO₃+KNO₃+H₂O system and its sub-binary systems have been measured by the isopiestic method at 273.1 and 298.1 K. The measured results were treated by a Pitzer-Simonson-Clegg thermodynamic model, from which the predicted solubility isotherms were compared with the experimental results. Based on this comparison, the reliability of the measured results was discussed. The measured results help in predicting the phase diagram of the ternary system, as well as other multi-component systems based on the ternary system.     

Glass formation in the Al(IO<Subscript>3</Subscript>)<Subscript>3</Subscript>-Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-HIO<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

On the basis of experimental data obtained in the study of glass-formation boundaries in the Al₂(SO₄)₃-HIO₃-H₂O, Al(IO₃)₃-Al₂(SO₄)₃-H₂O, and Al(IO₃)₃-HIO₃-H₂O systems and using geometrical analysis, we predict the positions of glass-formation boundaries in the Al(IO₃)₃-Al₂(SO₄)₃-HIO₃-H₂O four-component system along 60, 40, and 25 wt % H₂O sections.     

Glass formation in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> and SrO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

A physicochemical study of glasses based on the MO-Bi₂O₃-B₂O₃ and SrO-Bi₂O₃-B₂O₃ systems was performed. Glass formation regions were found. The structural and optical properties, as well as the thermal behavior of the glasses, were studied.     

Sorption of uranium(VI) onto strontium titanate in KNO<Subscript>3</Subscript> medium

The sorption of uranium(VI) on the perovskite structure of strontium titanate in a 0.5M KNO₃ solution is studied. SrTiO₃ commercial material was characterized by XRD showing a tausonite face, with a specific area of 2.42 m^2.g⁻¹. The electrical surface characterization of the compound was performed by mass and potentiometric titrations. pH_pzc in water was 8.5±0.3 and 9.1±0.2 in 0.5M KNO₃ solution, showing a positively charged surface. FITEQL 4.0 program was used to calculate the sorption curves and the surface acidity constants by the constant capacitance model obtaining: log K ₁ = 8.67 and log K ₂ = −9.43. The sorption edge was fitted with two different uranium(VI) species sorbed, corresponding to bidentate complexes of UO₂²⁺ and UO₂(OH)₂H₂O on the surface of strontium titanate.     

Glass formation in the Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Al(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

Glass formation boundaries in the Al₂(SO₄)₃-Al(NO₃)₃-H₂O system were determined. IR spectra were studied. Schemes of structural rearrangements within the boundaries of a second glass formation region in the Al(NO₃)₃-H₂O binary subsystem are suggested. A structure is suggested for glassy Al(NO₃)₃H₂O.     

Character of interaction and glass formation in the TlAs<Subscript>2</Subscript>Se<Subscript>4</Subscript>-Tl<Subscript>3</Subscript>As<Subscript>2</Subscript>S<Subscript>3</Subscript>Se<Subscript>3</Subscript> system

The TlAs₂Se₄-Tl₃As₂S₃Se₃ system was investigated by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis), and its phase diagram was constructed. The TlAs₂Se₄-Tl₃As₂S₃Se₃ join is a quasi-binary internal section of the As-Tl-S-Se quaternary system. The solubility range of TlAs₂Se₄-based solid solutions is extended to 7 mol %, and the region of Tl₃As₂S₃Se₃-based solid solutions is extended to 15 mol %.     

Glass formation in the system Al(IO<Subscript>3</Subscript>)<Subscript>3</Subscript>-HIO<Subscript>3</Subscript>-H<Subscript>2</Subscript>O

Glass-formation features in the system Al(IO₃)₃-HIO₃-H₂O are discussed, and the boundaries of the glass field are determined.     

Phase formation in the LiCl-LiNO<Subscript>3</Subscript>-KCl-Sr(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> system

The LiCl-LiNO₃-KCl-Sr(NO₃)₂ four-component system was studied for the first time by a complex of physicochemical analysis methods, including differential thermal analysis, X-ray diffraction, visual-polythermal, and projection thermographic methods. Eutectic and peritectic invariant point characteristics were determined, and the phase diagram of the system was constructed.     

Effect of the phase composition of the starting mixture on the formation of the layered perovskite-like compound Bi<Subscript>7</Subscript>Fe<Subscript>3</Subscript>Ti<Subscript>3</Subscript>O<Subscript>21</Subscript>

The effect of the phase composition of the starting mixture on the formation of the layered perovskite-like compound Bi₇Fe₃Ti₃O₂₁ in the Bi₂O₃-TiO₂-Fe₂O₃ system is reported. The rate-limiting process in the formation of this compound is reactant mass transfer to the reaction zone.     

Computational study on the reaction of CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>CH<Subscript>3</Subscript> with OH radical: mechanism and enthalpy of formation

The reaction mechanism of CH₃SCH₂CH₃ with OH radical is studied at the CCSD(T)/6-311+G(3df,p)//MP2/6-31+G(2d,p) level of theory. Three hydrogen abstraction channels, one substitution process and five addition–elimination channels are identified in the title reaction. The result shows hydrogen abstraction is dominant. Substitution process and addition–elimination reactions may be negligible because of the high barrier heights. Enthalpies of formation [ \Updelta_f H_{(298.15\textK)}^o \Updelta_{f} H_{(298.15{\text{K}})}^{o} ] of the reactants and products are evaluated at the CBS-QB3, G3 and G3MP2 levels of theory, respectively. It is found that the calculated enthalpies of formation by the aforementioned three methods are in consistent with the available experimental data. Rate constants and branching ratios are estimated by means of the conventional transition state theory with the Wigner tunneling correction over the temperature range of 200–900 K. The calculation shows that the formations of P1 (CH₂SCH₂CH₃ + H₂O) and P2 (CH₃SCHCH₃ + H₂O) are major products during 200–900 K. The three-parameter expressions for the total rate constant is fitted to be k_\texttotal = 1.45 ×10 ^{- 21} T^3.24 exp( - 1384.54/T) k_{\text{total}} = 1.45 \times 10^{ - 21} T^{3.24} \exp ( - 1384.54/T) cm³ molecule⁻¹ s⁻¹ from 200 to 900 K.     

Whitlockite solid solutions in the Ca<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>-K<Subscript>3</Subscript>VO<Subscript>4</Subscript>-NdVO<Subscript>4</Subscript> system

Phase equilibria in the Ca₃(VO₄)₂-K₃VO₄-NdVO₄ system have been studied. An extensive calcium orthovanadate-based solid solution was found to form with the boundary compositions as follows: Ca₃(VO₄)₂-Ca₉Nd(VO₄)₇-Ca_9.33K_2.33(VO₄)₇-Ca_7.88K_2.63Nd_0.87(VO₄)₇. The unit cell parameters of the whit-lockite vanadates synthesized increase as the potassium and neodymium contents increase. Phase transitions from the low-temperature β phase to the β′ centrosymmetrical structure in Ca_{9.33 − 5z} K_{2.33 + z} Nd_3z (VO₄)₇ vanadates have been studied dilatometrically. The increase in the β ai β′ transition temperature caused by potassium is interpreted as arising from the filling in of vacant cation positions M(4) and M(6).     

Synthesis of La<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript> by thermal treatment of mechanically activated salt mixture

A lanthanum zirconate La₂Zr₂O₇ was synthesized by soft mechanochemical method using zirconium oxynitrate ZrO(NO₃)₂·6H₂O and lanthanum carbonate La₂(CO₃)₃·8H₂O as reagents. Mechanical activation of the reagents was carried out in a centrifugal planetary ball mill. The processes occurring during calcination of the jointly and the separately mechanically activated salt mixture were studied using DSC, TG coupled with mass spectrometry, XRD analysis, and FTIR spectroscopy. It was shown that in the course of joint mechanical activation in the mill alongside with intimate mixing of the reagents and their amorphization exchange reaction occurred, producing lanthanum nitrate, basic lanthanum nitrate, basic zirconium carbonate, and hydrated zirconium oxide. The DSC curve of the jointly mechanically activated salt mixture showed a strong exothermic peak at 878 °C which was not associated with mass loss. This peak was attributed to La₂Zr₂O₇ crystallization in agreement with XRD data. Nanocrystalline lanthanum zirconate synthesized by annealing of the jointly mechanically activated salt mixture was characterized using XRD analysis, scanning, and transmission electron microscopy.     

Synthesis and study of solid acid materials SnO<Subscript>2</Subscript>/B<Subscript>2</Subscript>O<Subscript>3</Subscript>

SnO₂/B₂O₃ samples were produced by a reaction between SnCl₄, H₃BO₃, and (NH₂)₂CO in a boiling aqueous solution. The Sn: B molar ratio in these samples was 1: 1, 1: 2, and 1: 3. The phase composition and degree of crystallinity of these materials was studied. The surface acidity of the samples was analyzed by the method based on a temperature-programmed reaction of dehydration of 2-methyl-3-butyn-2-ol. Thermal transformations of SnO₂/B₂O₃ samples were examined by means of differential-thermal analysis.     

Phase formation in the InPO<Subscript>4</Subscript>-Na<Subscript>3</Subscript>PO<Subscript>4</Subscript>-Li<Subscript>3</Subscript>PO<Subscript>4</Subscript> ternary system

The 950°C isothermal section of the InPO₄-Na₃PO₄-Li₃PO₄ ternary system was studied and constructed; one-, two, and three-phase fields are outlined. Five solid-solution regions exist in the system: solid solutions based on the complex phosphate LiNa₅(PO₄)₂ (olympite structure), the indium ion stabilized high-temperature Na₃PO₄ phase (Na_{3(1 − x)}In _x (PO₄); space group Fm [`3]\bar 3 m), the complex phosphate Na₃In₂(PO₄)₃, and the α and β phases of the compound Li₃In₂(PO₄)₃. A narrow region of melt was found in the vicinity of eutectic equilibria. All the phases detected in the system are derivatives of phases existing in the binary subsystems. Isovalent substitution of lithium for sodium in Na₃In₂(PO₄)₃ leads to a significant increase in the region of a NASICON-like solid solution.     

NiAl/Ni<Subscript>3</Subscript>Al - Al<Subscript>2</Subscript>O<Subscript>3</Subscript>composite formation by reactive ball milling

It has been presented that the bulk mechanical alloying occurring in the Ni-hydroxycarbonate-aluminium mixture can produce homogeneously refined composite of nickel aluminides with aluminium oxide. The control of mechanochemical phenomenon was carried out by phase identification of milling products as well as their structural and morphological characterization. As a result the thermoanalytical and X-ray powder diffraction measurements as well as scanning electron microscopy with backscattered electron images (BSE) and X-ray energy dispersive spectroscopy (EDS) were applied. It was found that the kinetics of mechanochemical reactions depends on the chemical nature of initial salt.</o:p>     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

A comparative study of Ir/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>, Pt/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>, and Ru/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts in selective hydrogenation of crotonaldehyde

Catalytic performance of gallia-supported iridium catalysts in the reaction of selective hydrogenation of crotonaldehyde in the gas phase was studied and compared to that of platinum and ruthenium catalysts. The best catalytic properties in terms of the selectivity to crotyl alcohol are shown by 5 wt % Pt/α-Ga₂O₃ and 5 wt % Ir/α-Ga₂O₃ catalysts prepared from nonchlorine precursors: Pt(acac)₂ and Ir(acac)₃, but for the 5 wt % Pt/α-Ga₂O₃ a very high selectivity of 75% at the high conversion (ca. 60%) is observed. A high selectivity of galia-supported iridium and platinum catalysts was explained by the surface reducibility of gallium oxide leading to covering (decoration) of platinum and iridium by gallium suboxides and the promoting effect of gallium.     

The reaction between [RuCl<Subscript>2</Subscript>(PPh<Subscript>3</Subscript>)<Subscript>3</Subscript>] and hydroxyquinoline carboxylic acid

The reactions of [RuCl₂(PPh₃)₃] with 8-hydroxy-2-methyl-quinoline-7-carboxylic acid was examined, and a novel ruthenium(II) complex—[Ru(PPh₃)₂(C₅H₈NO)₂]—was obtained. The compound was studied by IR, UV–vis spectroscopy, and X-ray crystallography. The molecular orbital diagram of the complex was calculated with the density functional theory (DFT) method. The spin-allowed singlet–singlet electronic transitions of the compound were calculated using the time-dependent DFT method, and the UV–vis spectrum of the compound was discussed, on this basis. The luminescence property of the [Ru(PPh₃)₂(C₅H₈NO)₂]was examined.