Highly efficient synthesis of dicoumarols and xanthene derivatives in presence of Brønsted–Lewis acidic ionic liquids catalyst

A series of metal chloride-based acidic ionic liquids have been prepared and used as an efficient catalyst in one-pot multicomponent synthesis of biscoumarins and substituted xanthenes derivatives under solvent-free conditions. Among the acidic ionic liquids, N-methylpyrrolidonium zinc chloride (Hnmp/ZnCl₃)-based Brønsted–Lewis acidic ionic liquids were found to be an effective and recyclable catalyst for a one-pot synthesis of biscoumarins through the domino Knoevenagel–Michael reaction of a variety of aldehydes with 4-hydroxycoumarin in short reaction times. The reactions which occur under relatively mild conditions afforded the biscoumarin derivatives employing a very low loading of catalyst in satisfactory isolated yields and high purity after simple work-up. The Brønsted–Lewis acidic ionic liquid catalyst was reused four times without any variation in yield.     

Efficient cyclodehydration of diethylene glycol in Brønsted acidic ionic liquids

Cyclodehydration of diethylene glycol using various Brønsted acidic ionic liquids as dual solvent-catalysts has been studied for the first time. Better results were obtained in the presence of 1-butyl-3-methylimidazolium hydrogen sulfate ([PSmim]HSO₄) compared with other Brønsted acidic ionic liquids. Effects of the reaction conditions such as reaction temperature, reaction time and molar ratio of ionic liquid to diethylene glycol have been investigated. High diethylene glycol conversion, 97.0 %, and high 1,4-dioxane selectivity, 89.3 %, were obtained in [PSmim]HSO₄ under optimum conditions. Hammett method was used to determine the acidity order of these ionic liquids and the results were consistent with the catalytic activities observed in the cyclodehydration reaction. Utilization of Brønsted acidic ionic liquids as dual solvent-catalysts has some advantages, e.g. high conversion of DEG, easy preparation and reuse of ionic liquids, avoiding toxic catalysts and solvents.     

Catalytic efficiency of cesium and potassium salts of dodecatungstophosphoric acid supported on silica and comparison with H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/SiO<Subscript>2</Subscript>

Pure tungstophosphoric acid, potassium tungstophosphate, and cesium tungstophosphate with varying extent of substitution of protons by Cs or K ions x (x = 1, 2, 2.5, and 3) have been prepared and are supported on silica by the wet impregnation method. The extent of loading was fixed at 20 wt %. For the sake of comparison, unloaded Cs _x and K _x (x = 1) salts of tungstophosphoric acid were prepared by the precipitation method. The supported catalysts were characterized by FT-IR, XRD, specific surface area measurements, and catalytic conversion of tert-butanol. The results revealed that the catalytic conversion of tert-butanol proceeds mainly via dehydration yielding isobutene. The Cs₁PW/SiO₂, HPW/SiO₂, and K₁PW/SiO₂ catalysts were more active than their unsupported samples. The previous solids showed greater catalytic activity and stability. Unexpectedly, substitution of one proton of tungstophosphoric acid by a cesium or potassium ion exerted no measurable effect on the catalytic activity of the treated solids, in spite of decreasing the Brønsted acidity of Cs₁PW/SiO₂ and K₁PW/SiO₂ indicating that the acidity of HPW/SiO₂ decrease may be due to the interaction between HPW and the SiO₂ surface. On the other hand, significant decrease in the catalytic activity took place upon increasing the cation content (x) to x = 2, 2.5, and 3.     

Hydrolysis of cellulose by the heteropoly acid H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>

The potential of heteropoly acid H₃PW₁₂O₄₀ to catalyze the hydrolysis of cellulose to glucose under hydrothermal conditions was explored. This technology could contribute to sustainable societies in the future by using cellulose biomass. A study to optimize the reaction conditions, such as the amount of catalyst, reaction time, temperature, and the amount of cellulose used, was performed. A remarkably high yield of glucose (50.5%) and selectivity higher than 90% at 453 K for 2 h with a mass ratio of cellulose to H₃PW₁₂O₄₀ of 0.42 were achieved. This was attributed to the high hydrothermal stability and the excellent catalytic properties, such as the strong Brønsted acid sites. This homogeneous catalyst can be recycled for reuse by extraction with diethyl ether. The results illustrate that H₃PW₁₂O₄₀ is an environmentally benign acid catalyst for the hydrolysis of cellulose.     

Preparation and characterization of H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/ZrO<Subscript>2</Subscript> catalyst for carbonation of methanol into dimethyl carbonate

A H₃PW₁₂O₄₀/ZrO₂ catalyst for effective dimethyl carbonate (DMC) formation via methanol carbonation was prepared using the sol–gel method. X-ray photoelectron spectra showed that reactive and dominant (63%) W(VI) species, in WO₃ or H₂WO₄, enhanced the catalytic performances of the supported ZrO₂. The mesoporous structure of H₃PW₁₂O₄₀/ZrO₂ was identified by nitrogen adsorption–desorption isotherms. In particular, partial sintering of catalyst particles in the duration of methanol carbonation caused a decrease in the Brunauer–Emmett–Teller surface area of the catalyst from 39 to 19 m²/g. The strong acidity of H₃PW₁₂O₄₀/ZrO₂ was confirmed by the desorption peak observed at 415 °C in NH₃ temperature-programmed desorption curve. At various reaction temperatures (T?=?110, 170, and 220 °C) and CO₂/N₂ volumetric flow rate ratios (CO₂/N₂?=?1/4, 1/7, and 1/9), the calculated catalytic performances showed that the optimal methanol conversion, DMC selectivity, and DMC yield were 4.45, 89.93, and 4.00%, respectively, when T?=?170 °C and CO₂/N₂?=?1/7. Furthermore, linear regression of the pseudo-first-order model and Arrhenius equation deduced the optimal rate constant (4.24?×?10^?3 min^?1) and activation energy (E_a?=?15.54 kJ/mol) at 170 °C with CO₂/N₂?=?1/7 which were favorable for DMC formation.     

Synthesis and characterization of a new monophosphate (C<Subscript>6</Subscript>H<Subscript>16</Subscript>N<Subscript>2</Subscript>)(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Chemical preparation, crystal structure, and NMR spectroscopy of a new trans-2,5-dimethylpiperazinium monophosphate are given. This new compound crystallizes in the triclinic system, with the space group P-1 and the following parameters: a = 6.5033(3), b = 7.6942(4), c = 8.1473(5) Å, α = 114.997(3), β = 92.341(3), γ = 113.136(3), V = 329.14(3) ų, Z = 1, and D_x = 1.565 g cm^?3. The crystal structure has been determined and refined to R = 0.030 and R _w(F ²) = 0.032 using 1558 independent reflections. The structure can be described as infinite [H₂PO₄] _n ^n? chains with (C₆H₁₆N₂)²⁺ organic cations anchored between adjacent polyanions to form columns of anions and cations running along the b axis. This compound has also been investigated by IR, thermal, and solid-state, ¹³C and ³¹P MAS NMR spectroscopies and Ab initio calculations.     

Thermal analysis on C<Subscript>6</Subscript>H<Subscript>10</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>-doped MgB<Subscript>2</Subscript>

Additives to MgB₂ can improve the superconducting functional characteristics, such as critical current density (J _c) and irreversibility field (H _irr). Recently, we have shown that repagermanium (C₆H₁₀Ge₂O₇) is an effective additive, enhancing both J _c and H _irr. To look into details of the processes taking place during the reactive sintering, a thermal analysis study (0.167 K s^?1, in Ar) is reported. We used differential scanning calorimetry between 298 and 863 K and simultaneous thermogravimetric—differential thermal analysis between 298 and 1233 K. Samples were mixtures of powders with composition 97 mol% MgB₂ and 3 mol% C₆H₁₀Ge₂O₇. Up to 863 K, repagermanium decomposes by multiple steps and forms amorphous phases. A reaction with MgB₂ is not observed. Above this temperature, partial decomposition of MgB₂ occurs. Crystalline Ge and MgO are detected before formation of Mg₂Ge and MgB₄, when temperature approaches the melting point of Ge (1211 K). Carbon substitution for boron in the crystal lattice of MgB₂ is observed for samples heated above 863 K. The amount of substitutional C does not significantly change with temperature.     

Highly efficient mesoporous WO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/KIT-6 catalysts for oxidative desulfurization of dibenzothiophene with hydrogen peroxide

Oxidative desulfurization (ODS) of organic compounds containing sulfur element from a model oil was performed using tungsten oxide catalysts supported on mesoporous silica with cubic Ia3d mesostructure, well-defined mesopores (7.2 nm), high surface area (719 m²/g), and three-dimensional pore network (WO _x /KIT-6). The prepared WO _x /KIT-6 catalysts (5–20 wt% WO _x ) were characterized by X-ray diffraction analysis, N₂ sorption measurements, electron microscopy, H₂-temperature programmed reduction, Raman spectroscopy, and thermogravimetric analysis. Among the mesoporous catalysts, 10 wt% WO _x /KIT-6 exhibited the best catalytic performance. Sulfur-containing organic compounds, such as dibenzothiophene, 4,6-dimethyldibenzothiophene, and benzothiophene, were completely (100 %) removed from the model oil over 10 wt% WO _x /KIT-6 catalyst in 2 h. In addition, the catalyst could be reused several times with only slight decrease in catalytic activity.     

Configuration of MFI-type zeolite interacting with the probe molecule P(CH<Subscript>3</Subscript>)<Subscript>3</Subscript> – a theoretical study

With P(CH₃)₃ as the probe molecule adsorbed on titanium silicalite (TS-1) zeolite, the special and important role of T12 site in MFI-type zeolite was clearly elucidated. There are altogether three active sites present in TS-1 zeolite with Ti at the T12 site. Owing to the preferential adsorption of probe molecules on the first Brönsted acidic site, the Ti12 center will probably fail to show Lewis acidity. The ionic [HP(CH₃)₃]⁺ species can be stabilized by the first or second Brönsted acidic site, with the former energetically favored. The latter was formed through the transfer of the ionic [HP(CH₃)₃]⁺ species from the first to the second Brönsted acidic site.     

Mutual spontaneous and electrosurface processes at heterophase interfaces WO<Subscript>3</Subscript>|Me<Subscript>2</Subscript>(WO<Subscript>4</Subscript>)<Subscript>3</Subscript> (Me = In,Eu, Sc)

For the first time ever it is demonstrated in this work that, in spontaneous conditions and following the imposition of an electric field, mutual penetration of components of WO₃ and Me₂(WO₄)₃ occurs at heterophase interfaces WO₃|Me₂(WO₄)₃ where Me = In, Eu, or Sc. Tungstic oxide WO₃ is pulled onto the inner surface of ceramic Me₂(WO₄)₃ and, in turn, components of Me₂(WO₄)₃ penetrate onto the surface of grains of ceramic WO₃, which is confirmed by the method of x-ray—fluorescence analysis. Data concerning the conductivity and transport numbers of Eu₂(WO₄)₃ and a composite on its basis, which was manufactured as a result the electrosurface transport of WO₃, are obtained for the first time ever. With allowance made for the data on the O_2? character of the ionic conduction in MeWO₄ and Eu₂(WO₄)₃ it is concluded that the type of ionic carriers in tungstates (Me ⁿ⁺)_2/n [WO₄] makes no impact on the mechanism of spontaneous and field-induced processes that are developing at the (Me ⁿ⁺)_2/n [WO₄]|WO₃ interfaces.     

Preparation of fructone catalyzed by water-soluble Brφnsted acid ionic liquids

Fructone(2-methyl-2-ethylacetoacetate-1,3-dioxolane),a flavouring material,has been synthesized from ethyl acetoacetate and glycol using five water-soluble Br(?)nsted acid ionic liquids as catalysts for the first time.The used Br(?)nsted acid ionic liquids include [Hmim]Tfa,[Hmim]Tsa,[Hmim]BF_4,[Bmim]HSO4,[Bmim]H_2PO_4,and[Hmim]BF_4 showed the highest catalytic activity for the preparation of fructone.After reaction,the product could be isolated from the reaction system automatically,and the ionic liquid could be directly reused without dehydration.     

Chlorozincate(II) acidic ionic liquid: Efficient and biodegradable silylation catalyst

A practical and highly efficient silylation of alcohol and phenol derivatives with hexamethyldisilazane (HMDS) using acidic ionic liquids under mild reaction conditions is described. A series of Brønsted as well as Brønsted–Lewis acidic ionic liquids were prepared and their performance investigated for the silylation of a wide variety of alcohols and phenols with HMDS. Imidazole‐ as well as N ‐methyl‐2‐pyrrolidone‐based acidic ionic liquids have a higher catalytic activity for the protection of sensitive, hindered alcohols and phenols, thus providing an environmentally begin and versatile alternative to current acid catalysts. In addition, the acidic ionic liquids are reusable, being recovered easily and reused several times without significant deterioration in catalytic activity.     

Brønsted酸性离子液体中的二甘醇脱水环化反应

首次报道了Brønsted酸性离子液体介质中的二甘醇的脱水环化反应,考察了不同的离子液体、离子液体/二甘醇摩尔比、反应温度和时间对反应的影响。结果表明,Brønsted酸性离子液体作为反应介质能够促进脱水环化反应的有效进行,且在离子液体1-(3-磺酸根丙基)-3-甲基咪唑硫酸氢盐([SPmim]HSO4)中,二甘醇的转化率和1,4-二氧六环的选择性更高。采用Hammett指示剂法测定了离子液体的酸度函数H0,其酸性强弱顺序为[SPmim]HSO4 > [Bmim]HSO4 > [Amim]HSO4 > [Hmim]BF4> [Bmim]H2PO4 >[Amim]H2PO4 > [Hmim]Tsa,这与离子液体在脱水环化反应中的催化效果一致。当温度为170 ˚C,离子液体/二甘醇摩尔比为1:1时,二甘醇在[SPmim]HSO4中反应2 h,转化率可达到97.0%,1,4-二氧六环的选择性为89.3%。     

Catalytic <Emphasis Type="Italic">N</Emphasis>-Alkylation of Amines with Primary Alcohols over Halide Clusters

Piperidine was reacted with methanol under a hydrogen stream in the presence of (H₃O)₂[(W₆Cl₈)Cl₆]·6H₂O supported on silica gel. When the temperature was raised above 200 °C, the catalytic activity of the cluster appeared. Piperidine N-methylation proceeded yielding N-methylpiperidine in 95% selectivity at 350 °C. The corresponding halide clusters of niobium, molybdenum, and tantalum supported on silica gel also catalyzed the reaction. Primary alcohols such as ethanol and 1-propanol produced the corresponding N-alkyl products of piperidine; however, secondary and tertiary alcohols did not. Selective N-methylation of pyrrolidine, hexamethyleneimine, butylamine, and aniline also proceeded. Thus, the clusters catalyzed alkylation of aliphatic, alicyclic, and aromatic amines with primary alcohols. A Brønsted acid site attributable to a hydroxo ligand, which is formed on the cluster complex by thermal activation, is proposed as the active site of the catalyst.     

The influence of hydrogen-containing molybdenum and tungsten bronzes on the catalytic activity of palladium composite catalysts for the oxidation of H<Subscript>2</Subscript>, CO,and CH<Subscript>4</Subscript>

The influence of hydrogen-containing molybdenum and tungsten bronzes on the catalytic activity of palladium composite catalysts for the oxidation of H₂, CO, and CH₄ was studied. It was found that the composite catalysts containing H _x MO₃ phases (M = W or Mo), which were formed by the reduction of MoO₃ and WO₃ oxides with hydrogen in the presence of deposited Pd, showed higher catalytic activity in the oxidation of small molecules (H₂, CO, and CH₄) with excess oxygen than the traditional Pd/Al₂O₃ deposited catalyst with the same content of the deposited metal. It was shown that the thermal stability of the H _x MO₃ phases was the limiting factor influencing the activity of these composite catalysts.     

Supramolecular 2D structure of [Co(2-Me-Pyz)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The complex [Co(2-Me-Pyz)₂(H₂O)₄](NO₃)₂ is synthesized and its structure is determined. The crystals are monoclinic: space group P2₁/n, a = 10.685(2) Å, b = 6.837(1), c = 12.515(3) Å, β = 91.84(3)°, V = 913.8(3) ų, ρ_calcd = 1.042 g/cm ³, Z = 2. The Co²⁺ ion (in the inversion center) is coordinated at the vertices of the distorted octahedron by two nitrogen atoms of methylpyrazine and four oxygen atoms of the water molecules (Co(1)–N(1) 2.180(3), average Co(1)–O(w) 2.079(3) Å, angles at the Co atom 87.9(1)–92.1(1)°). Supramolecular pseudometallocycles are formed in the structure through the O(w)–H…N(1) hydrogen bonds between the coordinated H₂O molecules and the terminal nitrogen atoms of the 2-methylpyrazine molecules. Their interaction results in the formation of supramolecular layers joined by the NO₃ groups into a three-dimensional framework.     

Synthesis of pyranopyrazoles,benzopyrans, amino-2-chromenes and dihydropyrano[<Emphasis Type="Italic">c</Emphasis>]chromenes using ionic liquid with dual Brønsted acidic and Lewis basic sites

An efficient ionic liquid with both Brønsted acidic and Lewis basic sites, namely 1,4-dimethyl-1-(4-sulphobutyl)piperazinium hydrogen sulphate (IL1), was synthesised and characterised. IL1 is a “green”, homogeneous and reusable catalyst for: i) the synthesis of pyranopyrazoles (Va-Vj)and benzopyrans (VIa-VIj and VIIa-VIIf) at ambient temperature under solvent-free conditions and ii) the synthesis of amino-2-chromenes (VIIIa-VIIIi and IXa-IXi) and dihyropyrano[c]chromenes (Xa-Xi) at 80 °C under solvent-free conditions. The reactions were rapid with excellent product yields. In addition, the double Brønsted acid, 1,4-dimethyl-1,4-bis(4-sulphobutyl)piperazinium hydrogen sulphate (IL2), was prepared to evaluate the cooperation efficiency of their Brønsted acidic and Lewis basic sites as compared with the double Brønsted acidic sites in IL1.     

Synthesis,structural, spectral,thermal and comparative biological activity studies of [V<Subscript>2</Subscript>O<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>]

The hydrothermal reaction of a mixture of V₂O₅, VCl₃, 2,5-pyridinedicarboxylic acid and diluted H₂SO₄ for 68 h at 180°C gives a blue colored solution which yields prismatic blue crystals of IV ₂ ^IV O₂(SO₄)₂(H₂O)₆] (1) in 32% yield (based on V). Complex 1 was investigated by means of elemental analysis (C, H and S), TGA, FT-IR, manganometric titration, Single Crystal X-ray Diffraction Methods and also comparative antimicrobial activities. Crystal data for the compound: monoclinic space group P2₁/c and unit cell parameters are a = 7.3850(12) Å, b = 7.3990(7) Å, c = 12.229(2) Å, β = 108.976(12)° and Z = 2. Although structure of 1 as a natural mineral has been previously determined, this work covers new preparation method and full characterization of 1 along with comparison of antibacterial activity between 1 and the commercial vanadium(IV) oxide sulfate hydrate compounds, VOSO₄ · xH₂O (Riedel-de Haën and Alfa Aesar brand names). 1 was evaluated for the antimicrobial activity against gram-positive, gram-negative bacteria, yeasts and mould compared with the commercial VOSO₄ · xH₂O compounds. 1 showed weak activity against bacteria Bacillus cereus, Nocardia asteroides and yeast Candida albicans. A good antimicrobial activity was recorded against Cirtobacter freundii (15 mm). There are only a few reproducible well-defined vanadium(IV) starting materials to use for exploring the synthesis of new materials. VCl₄, VO(acac)₂, VOSO₄ · xH₂O and [V(IV)OSO₄(H₂O)₄] · SO₄ · [H₂N(C₂H₄)₂NH₂] are common starting materials for such applications. In addition to these compounds, 1 can be used as an oxovanadium precursor.     

Theoretical study on the H<Subscript>2</Subscript>S activation by PtCH<Subscript>2</Subscript><Superscript>+</Superscript> in the gas phase

The reaction mechanism of the gas-phase PtCH₂ ⁺ with H₂S has been systematically investigated on the doublet and quartet potential energy surfaces at BPW91/6-311++G(2d, p)∪ SDD level. The Pt in PtCH₂ ⁺ prefers to attack S–H bond in H₂S. For PtCH₂ ⁺ + H₂S reaction, the potential energy surfaces (PESs), including three reaction pathways of hydrogen (including one and two hydrogen elimination) and methane elimination, have been explored and characterized. By contrast with hydrogen elimination, methane elimination reaction channel is energetically favorable, which is in good agreement with the experimental observation. The optimal S–H bond activation is the first step, followed by cleavage of Pt–C and Pt–S bond. About the path a and b, the lowering of activation barrier is mainly caused by the more stabilizing transition state interaction \(\varDelta E_{\text{int}}^{ \ne }\), which is the actual interaction energy between the deformed reactants in the transition state.     

Coordination Chemistry of the Magic Inorganic Building Block {Fe<Superscript>II</Superscript>[Mo<Subscript>6</Subscript>P<Subscript>4</Subscript>O<Subscript>31</Subscript>]<Subscript>2</Subscript>}: Hydrothermal Synthesis and Crystal Structure of a New Reduced Ferrous Molybdophosphate

A new reduced ferrous molybdophosphate composite solid of the formula, [(C₁₀H₁₄N₂)H]₄[Fe^II ₁₀Mo^V ₂₄(H₂PO₄)₄(HPO₄)₁₂(PO₄)₄(H₂O)₁₆(OH)₁₆O₄₄]·12H₂O, has been synthesized from a reaction mixture of MoO₃, FeSO₄·7H₂O, C₂H₂O₄·2H₂O, nicotine, H₃PO₄, and H₂O under hydrothermal conditions. The crystal data: monoclinic, space group C2/m, a = 24.4349(124), b = 12.9935(66), c = 14.7281(74) Å, β = 104.87(1) Å, V = 4520(4) Å³, Z = 2, R ₁  = 0.0874, wR ₂  = 0.2179. The structure is built from the building blocks of the formula, {Fe^II[Mo₆P₄O₃₁]₂}, consisting of a network of MO₆ (M = Fe, Mo) octahedral and PO₄ tetrahedral linked through their vertices. The connectivity of the building blocks with two pairs of face-sharing dinuclear Fe(II) clusters of the formula of [Fe^II ₂(H₂O)₄O₅] on which a phosphate group is hanging gives rise to one-dimensional chains with eight-membered apertures. The remarkable hydrogen bonded interactions between the chains form a unique and interesting framework with three-dimensional intersecting tunnels where the protonated nicotine molecules as structuring templates and crystallization water molecules are situated.