<Emphasis Type="Italic">N</Emphasis>-alkylation of ethylenediamine with alcohols catalyzed by CuO-NiO/<Emphasis Type="Italic">γ</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

A simple method for N-alkylation of 1,2-diaminoethane with different alcohols in a fixed-bed reactor using cheap CuO-NiO/γ-Al₂O₃ as the catalyst has been developed. The present catalytic system was applicable in the N-alkylation of 1,2-diaminoethane with both primary and secondary alcohols. Mono-N-alkylation of 1,2-diaminoethane with low-carbon alcohols resulted in high yields; the yields of tetra-N-alkylation of 1,2-diaminoethane with low-carbon alcohols declined markedly with the increase of the molecular volume of alcohols.     

Fast evaluation of molecular auxiliary functions <Emphasis Type="Italic">A</Emphasis><Subscript>α</Subscript> and <Emphasis Type="Italic">B</Emphasis><Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> by analytical relations

Analytical relations through the initial values are derived for the molecular auxiliary functions A _α (x) and B _n (x), where α =n+ɛ, 0⩽ ɛ < 1 and n=0,1,2,.... These relations are useful in the fast calculation of multicenter molecular integrals over integer and noninteger n Slater type orbitals. It is shown that the formulas obtained are numerically stable for all values of n,ɛ and x.PACS No: 31.15.+q, 31.20.EjAMS subject classification: 81-V55, 81-V45     

An efficient synthesis of <Emphasis Type="Italic">β</Emphasis>-methoxycarbonyl-<Emphasis Type="Italic">γ</Emphasis>-butyrolactones

β-Methoxycarbonyl-γ-butyrolactones bearing a γ-aromatic substituent were prepared via copper-catalyzed reductive aldol addition/lactonization domino reactions of ketones with α,β-unsaturated dicarboxylate esters and a silane under ambient temperature. The reaction has advantage of using readily available reagents, mild conditions and high efficiency.     

Thermal analysis of the Ce<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Tb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> pigments

Compounds based on CeO₂ were synthesized as high-temperature environment-friendly inorganic pigments with interesting hues. The pigments have been synthesized by using the solid state reaction in the temperature range from 1,300 to 1,600 °C. The host lattice of these pigments is CeO₂ that is doped by terbium ions. The incorporation of doped ions provides interesting orange colours after application into ceramic glaze. The goal was to develop conditions for the synthesis of these compounds and to determine the influence of calcination temperature on their colouring effects. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. The pigments were also evaluated from the standpoint of their structure and particle sizes.     

Hydrothermal synthesis of Zn<Subscript>2</Subscript>Sn<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ti<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> as anode material for lithium-ion batteries

A novel electrode material, Zn₂Sn_{1 − x} Ti _x O₄ (x = 0 and 0.1), which is superior in its electrochemical characteristics to the reverse spinel Zn₂SnO₄, is synthesized by hydrothermal method. The admixture of TiO₂ levels out the volume expanding caused by the Li-Sn and Li-Zn alloy formation thus improving the material’s cyclability.     

PW based phase change nanocomposites containing <Emphasis Type=Italic>γ</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

Phase change nanocomposites were prepared by dispersing γ-Al₂O₃ nanoparticles into melting paraffin wax (PW). Intensive sonication was used to make well dispersed and homogeneous composites. Differential scanning calorimetric (DSC) and transient short-hot-wire (SHW) method were employed to measure the thermal properties of the composites. The composites decreased the latent heat thermal energy storage capacity, L _s, and melting point, T _m, compared with those of the PW. Interestingly, the composites with low mass fraction of the nanoparticles, have higher latent heat capacity than the calculated latent heat capacity value. The thermal conductivity of the nanocomposites was enhanced and increased with the mass fraction of Al₂O₃ in both liquid state and solid state.     

<Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> Diagram of MgO–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System: Microstructure Design

A computer model of the T–x–y diagram of MgO–SiO₂–Al₂O₃ system is used to show the possibility of analysis of its microstructure constitution in terms of competition between primary and eutectic crystals by means of vertical mass balance diagrams calculated for a given centroid over the whole temperature range. The usefulness of horizontal mass balance diagrams is considered for studying phase relations at a fixed temperature along the chosen isopleth. Mass balances were used to determine the crystallization path at the quasi-peritectic liquidus point with the invariant reaction L + Al₂O₃ = 3Al₂O₃ · 2SiO₂ + MgO · Al₂O₃, whose composition was taken into account in giving a rationale to corundum armor element technology.     

Electronic peltier effect in Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>(2 − <Emphasis Type="Italic">x</Emphasis>) − δ</Subscript>S

Temperature dependences of the Peltier coefficient are studied in the temperature range of 300–700 K under variation of the composition of the Li _x Cu_{(2 − x) − δ}S samples. The obtained values of the Peltier coefficient of the Li_0.05Cu_{1.95 − δ}S samples with a different copper content are within the range of 0.1–0.4 J/A, which is somewhat higher than the similar parameters of bismuth telluride, the basic material of semiconductor coolers.     

Preparation and crystal structure of bis(triethylene glycol-<Emphasis Type="Italic">O</Emphasis>,<Emphasis Type="Italic">O</Emphasis>′,<Emphasis Type="Italic">O</Emphasis>′’,<Emphasis Type="Italic">O</Emphasis>‴)manganese(II) dibromide

A new complex, bis(triethylene glycol-O,O′,O′’,O?)manganese(II) dibromide [Mn(TEG)₂]²⁺·2Br^?, was prepared. Its structure was studied by single crystal X-ray diffraction. The complex cation [Mn(TEG)₂]²⁺ is of the host-guest type with two TEG ligands (podands) as hosts. Both TEG ligands are disordered and tetradentate, with all the four oxygen atoms of each ligand participating in the coordination. The Mn²⁺ cation has coordination number 8, and its coordination polyhedron is a distorted bisdisphenoid (trigonal dodecahedron). The geometric parameters (bond lengths, bond and torsion angles) of the complex were determined relatively accurately. In the crystal structure, the ions form infinite thick layers by interionic hydrogen bonds O-H···Br^?.     

Hydroisomerization of <Emphasis Type="Italic">cis</Emphasis>-Stilbene into <Emphasis Type="Italic">trans</Emphasis>-Stilbene on Supported Heterogeneous Metal Catalysts (Rh,Pd, Pt,Ru, Ir/α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>)

The hydroisomerization of a cis-isomer to produce a trans-isomer on Rh, Pd, Pt, Ru, and Ir/α-Al₂O₃ catalysts is studied. It is shown that Rh and Ru catalysts on which the hydroisomerization reaction mostly takes place exhibit the most favorable characteristics, whereas on the other metals, the main route is the hydrogenation reaction. Rh/α-Al₂O₃ is the optimum catalyst, since it has much higher activity than Ru/α-Al₂O₃. It is found that the increased selectivity of the trans-isomer formation is facilitated by a decrease in the hydrogen pressure and by an increase in the substrate concentration. The maximum selectivity is achieved when the reaction is carried out in nonpolar n-hexane and toluene, whereas in the case of the more polar tetrahydrofuran (THF), dimethylformamide (DMFA), and methanol both the reaction rate and the selectivity of the trans-isomer formation decline.     

Production and characteristics of substituted lanthanum niobate LaNb<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>W<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4 + δ</Subscript>

Solid solutions LaNb_1–x W _x O_{4 + δ} (x = 0.02–0.10, Δx = 0.02) were investigated, which crystallize in the monoclinic system (space group I2/c) at room temperature and undergo a phase transition into the tetragonal modification with increasing temperature. The stability of various modifications was analyzed by high-temperature X-ray powder diffraction analysis. The electrical conductivity of sintered samples was studied by impedance spectroscopy. Insertion of tungsten into the niobium sublattice leads to an increase in the conductivity of the solid solutions.     

Cycling performance of LiNi<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>Mn<Subscript>2 − <Emphasis Type="Italic">y</Emphasis></Subscript>O<Subscript>4</Subscript> prepared by the solid-state reaction

In order to improve the cycling performance of LiMn₂O₄, a part of Mn in LiMn₂O₄ was replaced by Ni. LiNi _y Mn_{2 − y} O₄ (y = 0.02, 0.05, 0.10, 0.15, and 0.20) were synthesized by preheating a mixture of LiOH, MnO₂ (CMD), and NiO at 400°C for 10 h and then calcining at 850°C for 48 h in air with intermediate grinding. The voltage vs. discharge capacity curves at a current density of 300 μA/cm² between 3.5 and 4.3 V showed two plateaus, but the plateaus became unclear as the value of y increased. The sample with y = 0.02 had the largest first discharge capacity of 118.1 mA h/g. The LiNi_0.10Mn_1.90O₄ sample had a relatively large first discharge capacity of 95.0 mA h/g and snowed an excellent cycling performance.     

Planar Four-Coordinate Carbon in Star-Like Perlithioannulenes C<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Li<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 3–6)

The structure and stability of perlithioannulenes C _n Li _n (n = 3–6) were examined ab initio [MP2(full)/6-311+G**] and in terms of the density functional theory (B3LYP/6-311+G**). The systems with n = 3, 5, and 6 may be stabilized as planar star-like structures with bridging lithium atoms and hypercoordinate carbon atoms. Star-like structures are the most stable isomers of odd-numbered annulenes (n = 3, 5), while the most stable isomers of even-numbered annulenes (n = 4, 6) have less symmetric nonplanar structures.     

Anodic Electrocatalysts for Fuel Cells Based on Pt/Ti<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Ru<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript>

The electrocatalytic activity of materials in the 10% Pt/Ti_1–xRu _x O_2–δ system, where x = 0–0.3 (0 ≤ Ru ≤ 30 mol %), in the reactions of hydrogen electrooxidation in the presence of CO is studied in the liquid three-electrode cell and a model of fuel cell. It is shown that the tolerance of the electrocatalysts towards CO is determined by the crystal structure of the support: the support with the rutile structure provides a higher rate of CO desorption than the support with the anatase structure. The potential of the onset of CO oxidation decreases with increasing concentration of dopant in the support from 650 mV for 10% Pt/TiO₂ to 480 mV (NHE) for 10% Pt/Ti_0.91Ru_0.09O_2–δ (rutile). The use of these materials as the anodic catalysts of fuel cell operating with hydrogen containing 30 ppm CO enabled us to obtain a current density by 7 times higher as compared with the 20% PtRu/C E-Tec catalysts.     

TiO<Subscript>2</Subscript>/TiO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>N<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> nanocomposite and its acetaldehyde photodecomposition ability

Nitrogen-doped titania was coupled with the commercial titania nanoparticles by mechanical milling in liquid medium. The as-prepared nanocomposites (TiO₂/TiO_2−x N _y ) were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) specific surface area, UV–Vis spectroscopy, chemiluminescence, and acetaldehyde decomposition activity techniques. When a small amount of nitrogen-doped titania was added into the commercial titania, higher intensity and longer lifetime of ¹O₂ was observed, and the photocatalytic activity was efficiently improved. The TiO_2−x N _y acts as the acceptor of photoinduced holes. The recombination of the electron-hole was effectively depressed by the heterogeneous electron transfer. This could be an effective way to obtain highly active photocatalysts.     

The synthesis and transport properties of the cuprates La<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript>1 + <Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>2</Subscript>O<Subscript>6 + δ</Subscript>

The cuprates La_{2 ? x} Sr_{1 + x} Cu₂O_{6 + δ}(x = 0, 0.1, 0.2) are synthesized by solid-state method. Their dc conductivity was studied over the 373 to 1173 K temperature range and 10 to 2.1 × 10⁴ Pa oxygen partial pressure range by using four-probe technique. It is shown that the cuprate conductivity in air is maximal at ～673 K; it is 60 S/cm for La₂SrCu₂O_6.09; 68 S/cm, for La_1.9Sr_1.1Cu₂O_6.18; and 81 S/cm, for La_1.8Sr_1.2Cu₂O_6.10. The thermal expansion coefficient of La₂SrCu₂O_6.09 is determined by thermomechanical method and high-temperature X-ray diffraction method; its value (16 ppm K^?1) shows that the material is compatible with the ceria-based solid electrolytes during the thermal cycling.     

Transformations of <Emphasis Type="Italic">gem</Emphasis>-dibromoarylcyclopropanes under nitrosation conditions on treatment with NOCl·(SO<Subscript>3</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

The reaction of 2-aryl-1,1-dibromocyclopropanes with adduct NOCl·(SO₃) _n leading to 3-aryl-5-bromoisoxazoles as a result of nitrosation—heterocyclization of the cyclopropane ring was studied. The reaction is accompanied with electrophilic aromatic bromination. The mechanism of the transformation was discussed, the optimal reaction conditions to enhance the reaction selectivity were developed.     

Magnetic properties of CuCr<Subscript>2–<Emphasis Type="Italic">х</Emphasis></Subscript>Sb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript>4</Subscript> (<Emphasis Type="Italic">х</Emphasis> = 0–0.5) solid solutions

Magnetic properties of spinel solid solutions CuCr_2–х Sb _x Se₄ (х = 0–0.5) were measured in the temperature range 5–300 K in a constant (50 Oe and 10 kOe) magnetic field. The results are interpreted in terms of the ionic model suggested earlier for CuCr₂Х₄ compounds.     

Synthesis and electrochemical evaluation of La<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3</Subscript> catalysts for zinc-air batteries

La_1-x Sr _x MnO₃ (x?=?0.1～0.4) catalysts for primary and rechargeable zinc-air batteries have been successfully synthesized by the citrate method and their electrochemical properties measured. The materials can catalyze both ORR and OER, and the one with ideal composition of La_0.8Sr_0.2MnO₃ catalyst exhibits the highest catalytic activity and durability in alkaline medium. The resulting primary zinc-air cell shows a peak power density of 146 mW cm^?2 at 235 mA cm^?2. The secondary cell exhibits a charge-discharge voltage gap of 1.0 V at 10 mA cm^?2, which is highly stable over many charge-discharge cycles.