Radiometric efficiency of analytical filters at different physical conditions

The radiometric efficiency of three analytical filters AFA-RSP-20, AFA-RMP-20 and AFA-RMV-20 was examined at different air velocities and aerosol number concentrations. An experimental setup had been constructed with 2 m³ radon chamber. Alpha radiometry was used to measure the deposited activities in the filters. Aerosols parameters like number concentration and size distribution are measured continuously with an aerosol diffusion spectrometer (ADS). RMV filter has a stable efficiency ~ 99.8%. The RSP and RMP filters efficiency is depending on the aerosol concentration and air sampling velocity. The effect of an aerosol concentration on the filter efficiency is more obvious than the effect of air velocity.

     

Roll-to-Roll Production of Spider Silk Nanofiber Nonwoven Meshes Using Centrifugal Electrospinning for Filtration Applications

Filtration systems used in technical and medical applications require components for fine particle deep filtration to be highly efficient and at the same time air permeable. In high efficiency filters, nonwoven meshes, which show increased performance based on small fiber diameters (e.g., using nanofibers), can be used as fine particle filter layers. Nanofiber nonwoven meshes made by electrospinning of spider silk proteins have been recently shown to exhibit required filter properties. Needle-based electrospinning, however, is limited regarding its productivity and scalability. Centrifugal electrospinning, in contrast, has been shown to allow manufacturing of ultrathin polymer nonwoven meshes in an efficient and scalable manner. Here, continuous roll-to-roll production of nonwoven meshes made of recombinant spider silk proteins is established using centrifugal electrospinning. The produced spider silk nanofiber meshes show high filter efficiency in the case of fine particulate matter below 2.5 µm (PM2.5) and a low pressure drop, resulting in excellent filter quality.     

The use of impregnated filters to collect traces of gases in the atmosphere : Part ii. collection of sulfur dioxide on membrane filters

HA and AA Millipore filters impregnated with 5% potassium bicarbonate and dried were found to be suitable for sampling concentrations of sulfur dioxide in air. The impregnation technique and filter loadings are described; flow rates are relatively unaffected by impregnation. The apparatus and procedures used for preparation and sampling known concentrations of sulfur dioxide in air are described. Comparisons of actual and theoretical concentrations in the 0.1 to 10 p.p.m. range showed that the concentrations prepared must be assayed.The collection efficiency of impregnated filters was evaluated for sodium tetrachloromercurate-(II) (less than 10% which is in contrast with the 100% efficiency found with TCM as a scrubbing solution) and potassium bicarbonate (greater than 95%). The capacity of the filters was such that sampling a 10 p.p.m. sample for at least 1 h is possible.     

Selected ion flow tube mass spectrometry of exhaled breath condensate headspace

Collection of exhaled breath condensate (EBC) is a relatively simple noninvasive method of breath analysis; however, no data have been reported that would relate concentration of volatile compounds in EBC to their gaseous concentrations in exhaled air. The aim of the study was to investigate which volatile compounds are present in EBC and how their concentrations relate to results of direct breath analysis. Thus, samples of EBC were collected in a standard way from several subjects and absolute levels of several common volatile breath metabolites (ammonia, acetone, ethanol, methanol, propanol, isoprene, hydrogen cyanide, formaldehyde and acetaldehyde) were then determined in their headspace using selected ion flow tube mass spectrometry (SIFT-MS). Results are compared with those from on-line breath analyses carried out immediately before collecting the EBC samples. It has been demonstrated that SIFT-MS can be used to quantify the concentrations of volatiles in EBC samples and that, for methanol, ammonia, ethanol and acetone, the EBC concentrations correlate with the direct breath levels. However, the EBC concentrations of isoprene, formaldehyde, acetaldehyde, hydrogen cyanide and propanol do not correlate with direct breath measurements. Copyright (c) 2008 John Wiley & Sons, Ltd.     

Electrospun Polyacrylonitrile Nanofibrous Membranes for Point-of-Use Water and Air Cleaning

Novel electrospun polyacrylonitrile (PAN) nanofibrous membranes were prepared by using heat-press lamination under various conditions. The air permeability and the burst-pressure tests were run to select the membranes for point-of-use air and water cleaning. Membrane characterization was performed by using scanning electron microscopy, contact angle, and average pore size measurements. Selected membranes were used for both air dust filtration and cross-flow water filtration tests. Air dust filter results indicated that electrospun PAN nanofibrous membranes showed very high air-dust filtration efficiency of more than 99.99 % in between PM_0.3 and PM_2.5, whereas cross-flow filtration test showed very high water permeability over 600 L/(m²hbar) after 6 h of operation. Combining their excellent efficiency and water permeability, these membranes offer an ideal solution to filter both air and water pollutants.     

Effect of additives in a carrier gas on the behavior of ions in an ion-mobility increment spectrometer

The effect of additives (ethanol, acetic acid, water, chloroform, and acetone) in air used as the carrier gas on the changes in the spectra of the H⁺(C₆H₅NH₂) ion was studied for an ion-mobility increment spectrometer (IMIS) operating in tandem with a mass spectrometer (MS). It was shown that the presence of additives could improve both the resolution of the instrument and the sensitivity of the method. The resolving power was increased fourfold using air saturated with an ethanol vapor, while the sensitivity was increased 11-fold upon adding a mixture of ethanol and acetic acid to the carrier gas. The dependences on the concentration of the additives indicate that the formation of the clusters is the reason for these effects. The presence of an ethanol vapor in the carrier gas almost completely eliminates the effect of the present water vapor; therefore, air saturated with ethanol vapors can be used in the IMIS-MS instruments without drying.     

Online monitoring of aerosols with an energy-dispersive X-ray spectrometer

A continuously working sampling and analyzing device was developed and tested. It is suitable for monitoring of metals bound to particulate matter in emissions of stack gases. The samples were precipitated on a pure quartz fiber filter tape and analyzed shortly afterwards non-destructively by an energy dispersive X-ray spectrometer (EDXRS). By using this method a wide range of elements with atomic numbers from 19 (K) ¶to 82 (Pb) can be analyzed. New experiments have shown that the novel combined particle sampling and analysis system ¶(X-DUST) could also successfully be used for the monitoring of toxic elements in ambient air.     

Influence of Ferroelectric Materials and Catalysts on the Performance of Non-Thermal Plasma (NTP) for the Removal of Air Pollutants

The introduction of ferroelectric and catalytically active materials into the discharge zone of NTP reactors is a promising way to improve their performance for the removal of hazardous substances, especially those appearing in low concentrations. In this study, several coaxial barrier-discharge plasma reactors varying in size and barrier material (glass, Al₂ O₃, and TiO₂) were used. The oxidation of methyl tert-butyl ether (MTBE), toluene and acetone was studied in a gas-phase plasma and in various packed-bed reactors (filled with ferroelectric and catalytically active materials). In the ferroelectric packed-bed reactors, better energy efficiency and CO₂ selectivity were found for the oxidation of the model substances. Studies on the oxidation of a toluene/acetone mixture in air showed an enhanced oxidation of the less reactive acetone related to toluene in the ferroelectric packed-bed reactors. It can be concluded that the change of the electrical discharge behaviour was caused by a larger number of non-selective and highly reactive plasma species formed within the ferroelectric bed. When combining ferroelectric (BaTiO₃) and catalytically active materials (LaCoO₃), only a layered implementation led to synergistic effects utilising both highly energetic species formed in the ferroelectric packed-bed and the potential for total oxidation provided by the catalytically active material in the second part of the packed bed.     

The sampling of hydrogen sulfide in air with impregnated filter paper

A method is proposed for the quantitative collection of hydrogen sulfide in air on impregnated filter paper. An aqueous solution of potassium hydroxide, potassium zincate and glycerol is used as impregnating fluid. The stability of the collected sulfide and the efficiency of collection at different humidities, temperatures, hydrogen sulfide concentrations and air velocities were determined.     

Analysis of human breath with micro extraction techniques and continuous monitoring of carbon dioxide concentration

The detection of volatile organic compounds (VOCs) in human breath can be useful for the clinical routine diagnosis of several diseases in a non-invasive manner. Traditional methods of breath analysis have some major technical problems and limitations. Membrane extraction with a sorbent interface (MESI), however, has many advantages over current methods, including good selectivity and sensitivity, and is well suited for breath analysis. The aim of this project was to develop a simple and reproducible sampling device and method based on the MESI system for breath analysis. The feasibility and validity of the MESI system was tested with real human breath samples. Internal standard calibration methods were used for the quantitative analysis of various breath samples. Calibration curves for some main components (target analytes such as acetone and pentane) were determined in the research. The optimized stripping-side and feeding-side gas velocities were determined. The use of breath CO₂ as an internal standard for the analysis of breath VOCs is an effective method to solve the difficulties associated with variations in the target analyte concentrations in a sample, which are attributed to mass losses and different breathing patterns of different subjects. In this study, the concentration of breath acetone was successfully expressed normalized to CO₂ as in the alveolar air. Breath acetone of healthy males and females profiled at different times of the day was plotted using the MESI system, and results were consistent with the literature. This technique can be used for monitoring breath acetone concentrations of diabetic patients and for applications with other biomarker monitoring.     

Acceleration of Acetone Destruction Process under Synergistic Action of Photocatalytic Oxidation and Barrier Discharge

Separate and joint work of photocatalytic oxidation based on TiO₂ and surface barrier discharge as a source of active oxygen and UV radiation is investigated for acetone vapors destruction under ambient air conditions. Experiments were carried out in a 404 l airtight Plexiglas chamber and used five different combinations of photocatalyst, barrier discharge and ultraviolet irradiation under identical initial concentration (∼170 ppm) of acetone. It is shown for the synergistic action of photocatalytic method and barrier discharge that the initial rate of acetone decomposition per watt of input power increases in more than 1.5 times compared to photocatalytic oxidation. Under operation of plasma of barrier discharge, intermediate products are formed such as CO, acetic acid, acetaldehyde and methane nitrate (CH₃NO₃). These products are not detected for photocatalytic oxidation. Some interesting features of kinetics of acetone decomposition and formation of intermediate products with participation of barrier discharge are revealed.     

Iron, manganese, copper and titanium in welding fume dust on filters for internal and external quality assurance

Summary Filters charged with welding fume dust were developed and produced for internal and external quality assurance to evaluate and improve the performance of analytical methods used for monitoring iron, manganese, copper and titanium in the working environment. The filters were simultaneously loaded, using a Sputnic air sampling unit containing 100 cellulose nitrate filters. The welding fume dust was collected in industrial working conditions where Metal Inert Gas welding in construction steel was being carried out. The metal concentrations on the filters were close to the metal concentrations from environmental and industrial exposure. The homogeneity of the filter materials was evaluated to document the suitability of the air sampler in producing quality control materials. The filters were homogeneous within 5.0–12.7% according to amount of metal. The welding fume dust loaded on the filters was (0.2021±0.0093 mg/filter) and the amounts of metals loaded on the filters were (34.6±6.4 g/filter, 16.0±0.8 g/filter, 2.4±0.1 g/filter) for iron, manganese and titanium, respectively. Normalizing the amount of metal according to the welding fume dust improved the homogeneity. The most satisfactory results were obtained for manganese and titanium, for which within batch variation was below 6.3%. The Sputnic air sampler was shown to be suitable in preparing quality control materials, although a few improvements are needed for future experiments, such as the method of charging the dust and rules for outlier exclusion.     

Determination of airborne mercury-203

A method is described for the determination of airborne compounds of²⁰³Hg. The method is based on the sorption of Hg on hopcalite (activated copper oxide/manganese oxide) with subsequent monitoring for the gamma-radiation of²⁰³Hg. Aerosol activity in the air is separated by sucking the air through a filter prior to the absorption tube. The sensitivity of the method permits the assessment of less than one tenth of the maximum permissible concentration in air. It is shown experimentally that the separation procedure used is suitable for the determination of airborne mercuric acetate and its thermal decomposition products.     

Determination of Pyrethroid and Organophosphorus Insecticides in Indoor Air by Microwave-Assisted Extraction with Gas Chromatography/Mass Spectrometry

The goal of this study was to evaluate the efficiency of microwave-assisted extraction for the recovery of pyrethroid and organophosphorus insecticides adsorbed on quartz fiber filters and C18 disks used for indoor air sampling. The extraction solvent, temperature, and time were optimized by spiking tests. The recoveries for the insecticides obtained by microwave-assisted extraction with acetone at 50°C for 5 min were between 71.9% and 119.2% with relative standard deviations between 0.3% and 9.3% at two spike levels (0.1 µg and 1.0 µg). The results of the microwave-assisted extraction under the validation conditions were comparable to those obtained by Soxhlet extraction, which was used as a reference technique. In a preliminary analysis, resmethrin and tetramethrin were determined in the indoor air of an apartment unit at concentrations of 7.8 ng/m³ and 66.0 ng/m³, respectively, using the microwave-assisted extraction-based method with gas chromatography/mass spectrometry.     

A systematic evaluation of protocols for a proteomics analysis of (lyophilized) fruit tissues

This study represents a systematic evaluation of protocols for protein extraction and cleanup for fruit proteomic analysis. Procedures were optimized using pooled lyophilized banana fruit pulp, which is known to be particularly tricky due to high concentrations of soluble polysaccharides, phenolics, and other substances that interfere with protein extraction and purification. A total of 18 combinations of three protein extraction procedures (SDS‐based, Triton X‐100‐based, and phenol‐based), three protein precipitating agents (ammonium acetate/methanol, TCA/acetone, and acetone), and two resolubilization buffers (classical Rabilloud and the so‐called R2D2) were compared for total protein yields and efficiency of recovery. The results demonstrate that while losses in total recovered protein are unavoidable, the degree of these losses depends on the method combinations used. Combinations based on buffer‐saturated phenol always gave the highest yields, and overall recovery and purity was highest when acetone was combined with the R2D2 buffer for protein purification and concentration. Comparative 2D‐PAGE analysis confirmed that this method combination produced high‐quality and reproducible gels and the largest numbers of spots per gel. The usefulness of this methodology was demonstrated on ripe fruits from several other species and shown to give excellent results.     

Assays for total homocysteine and other thiols by capillary electrophoresis-laser-induced fluorescence detection. I. Preanalytical condition studies

In recent papers, we presented a new analytical method for thiol quantification in serum. It is based on the use of capillary electrophoresis and laser-induced fluorescence to analyze thiol 6-iodoacetamidofluoresceine (IAF) derivatives. Quantitative results of homocysteine, glutathione, cysteine-glycin, and cysteine were shown (Clin. Chem. 45 (1999) 412). A comprehensive comparison of the quantitation of homocysteine in serum, using high-performance liquid chromatography/conventional fluorescence detection and fluorescence polarization immunoassay was also used (E. Caussé et al., Electrophoresis 21 (2000) 2074). Sample preparation prior to derivatization with IAF had never been investigated. In this work we present the results of quantitation of thiols in serum and plasma with three different anticoagulants widely used: ethylenediaminetetraacetic acid (EDTA), heparin, and sodium citrate. We show that serum and EDTA plasma gave the same results. Then serum protein precipitations by acetonitrile, acetone, sulfosalicylic acid, perchloric acid and trichloracetic acid, prior to derivatization by IAF, were also investigated. Their influence on the concentrations of the thiols were determined. Sulfosalicylic acid and acetonitrile precipitations are well adapted, whereas acetone cannot be used.     

Self-Diffusion and Heteroassociation in an Acetone–Chloroform Mixture at 298 K

The self-diffusion coefficients of acetone and chloroform in a binary acetone–chloroform mixture at 298 K are determined via pulsed field gradient NMR spectroscopy. It is estimated that the hydrodynamic radii of the mixture’s components, calculated using the Stokes–Einstein equation, grow as the concentrations of the components fall. It is shown that such behavior of hydrodynamic radii is due to acetone–chloroform heteroassociation. The hydrodynamic radii of monomers and heteroassociates in a 1: 1 ratio are determined along with the constant of heteroassociation, using the proposed model of an associated solution.     

Non-Thermal Plasma Assisted Regeneration of Acetone Adsorbed TiO2 Surface

Improvement of indoor air quality regarding volatile organic compounds (VOCs) requires the development of innovative oxidation processes. This paper investigates the coupling of a metal oxide sorbent with non-thermal plasma (NTP) in an especially designed reactor. TiO₂ was selected as model sorbent and acetone was used as model VOC. The analyses of gas phase species at the reactor downstream have been performed using FTIR spectroscopy. In a first step, acetone adsorption on TiO₂ surface under dry air was characterized in terms of total amount adsorbed, as well as reversibly and irreversibly adsorbed fractions. Obtained results were compared and discussed with literature in terms of acetone reactive adsorption on TiO₂ surface. Mesityloxide was proposed as the major compound in the irreversibly adsorbed fraction. In a second time, acetone saturated TiO₂ surface was exposed to NTP surface discharge. Irrespectively of the injected power, <30 % of the initially adsorbed acetone has been recovered as CO, CO₂ and desorbed acetone. Finally, thermal desorptions have been performed. They evidenced that (1) NTP treatment modifies the nature of the adsorbed organic species, (2) mineralization rate is considerably improved. Based on desorbed species temporal profile analysis, carboxylates and more especially formates are suggested as major adsorbed species after NTP treatment (P_inj > 0.2 W). This hypothesis has been evaluated and confirmed. This paper finally evidenced that NTP can be used as an efficient pretreatment technique to promote the mineralization of adsorbed acetone for further thermal treatment.     

Results from interlaboratory comparisons of aldehyde-2,4 dinitrophenylhydrazone analysis

Within the framework of the SMT "Aldehydes" project (SMT4-CT97-2910) three laboratory comparisons have been organized in which artificial aldehyde hydrazone samples have been distributed among participating laboratories. To these samples potentially interfering compounds have been added to simulate as closely as possible real air or air emission samples.In addition to the "Aldehydes" project partners external EU laboratories have participated. It may, therefore, be assumed that the results of these comparisons reflect the state-of-the-art in the analytical determination of aldehydes in air samples using the 2,4-dinitrophenylhydrazine (DNPH)-method. In this paper several aspects of the organization of these comparisons and the overall results obtained are presented. These demonstrate that results obtained using liquid chromatographic techniques are usually comparable between laboratories within +/-2 times the coefficient of variation (approximately 6-15%), indicating the robustness of the methodology. In addition, laboratory (liquid chromatography) mean results can be made to agree with preparation concentrations at the 95% confidence levels after optimization of separation and integration conditions; these are mainly related to the measurement of formaldehyde in the presence of interferents and the measurement of low concentrations of acrolein and acetone. Some problem areas still remain, however--namely the measurement of glutaraldehyde and the measurement of low levels of acetone.     

Online monitoring of aerosols with an energy-dispersive X-ray spectrometer

A continuously working sampling and analyzing device was developed and tested. It is suitable for monitoring of metals bound to particulate matter in emissions of stack gases. The samples were precipitated on a pure quartz fiber filter tape and analyzed shortly afterwards non-destructively by an energy dispersive X-ray spectrometer (EDXRS). By using this method a wide range of elements with atomic numbers from 19 (K) to 82 (Pb) can be analyzed. New experiments have shown that the novel combined particle sampling and analysis system (X-DUST) could also successfully be used for the monitoring of toxic elements in ambient air.