Performance and Mechanism of Alkylimidazolium Ionic Liquids as Corrosion Inhibitors for Copper in Sulfuric Acid Solution

The addition of corrosion inhibitors is an economic and environmental protection method to prevent the corrosion of copper. The adsorption, performance, and mechanism of three 1-alkyl-3-methylimidazolium hydrogen sulfate ([BMIM]HSO₄, [HMIM]HSO₄, and [OMIM]HSO₄) ionic liquids (ILs) on the copper surface in 0.5 M H₂SO₄ solutions were studied by quantum chemical calculation, quantitative structure-activity relationship (QSAR), and molecular dynamics simulation. It is found that the main reactive site is located on the imidazolium ring (especially the C2, N4, and N7 groups). When the alkyl chain of the imidazolium ring is increasing, the molecular reactivity of the ILs and the interaction between the ILs inhibitor and copper surface are enhanced. The imidazole ring of the ILs tends to be adsorbed on Cu (111) surface in parallel through physical adsorption. The order of adsorption energy is [Bmim]HSO₄ < [Hmim]HSO₄ < [OMIM]HSO₄, which is in agreement with the experimental order of corrosion efficiency. On the imidazole ring, the interaction between the copper surface and the C atom is greater than that between the copper surface and the N atom. It is found that ILs addition can hinder the diffusion of corrosion particles, reduce the number density of corrosion particles and slow down the corrosion rate. The order of inhibition ability of three ILs is [Bmim]HSO₄ < [Hmim]HSO₄ < [OMIM]HSO₄,which agree well with experimental results. A reliable QSAR correlation between the inhibition corrosion efficiency and molecular reactivity parameters of the ILs was established.     

The synthesis of Fe-containing ionic liquid and its catalytic performance for the dehydration of fructose

Four Fe-containing ionic liquids (ILs) were synthesized by coupling of conventional imidazole ionic liquids [C_xmim]Cl (x = 4, 8, 12, 16) with FeCl₃ and were characterized by FT-IR, Raman, ESI–MS and TG. All of the Fe-containing ILs were applied to the conversion of fructose into 5-hydroxymethylfurfural (HMF) in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) subsequently and the result showed that [C₁₆mim]FeCl₄ exhibited excellent catalytic performance. Then the different reaction parameters with [C₁₆mim]FeCl₄ as catalyst were studied in detail. A 92.8% yield of HMF was obtained with 0.03 g [C₁₆mim]FeCl₄ and 0.1 g fructose in 1.0050 g [Bmim]Cl at 80 °C for 40 min in fructose/[Bmim]Cl solution.     

Preparation of cellulose I nanowhiskers with a mildly acidic aqueous ionic liquid: reaction efficiency and whiskers attributes

Cellulose I nanowhiskers were prepared in relatively high yield (48 ± 2 %) by single-stage hydrolysis of microcrystalline cellulose with an aqueous solution of 1-butyl-3-methylimidazolium hydrogen sulfate ([Bmim]HSO₄). This reaction occurred under mildly acidic reaction conditions with an [H⁺]/[AGU] ratio of 0.24 mol/mol, i.e., 2 orders of magnitude lower than with concentrated sulfuric acid. The nanowhiskers exhibited small width and width distribution and also smaller length than nanowhiskers obtained with concentrated acid. With a relatively low content of sulfur they also exhibited higher thermal stability than whiskers obtained with concentrated sulfuric acid. The lower solvating power of the aqueous ionic liquid compared to that of concentrated sulfuric acid likely contributes to the greater hydrolysis efficiency in the present system.     

Preparation of fructone catalyzed by water-soluble Brφnsted acid ionic liquids

Fructone(2-methyl-2-ethylacetoacetate-1,3-dioxolane),a flavouring material,has been synthesized from ethyl acetoacetate and glycol using five water-soluble Br(?)nsted acid ionic liquids as catalysts for the first time.The used Br(?)nsted acid ionic liquids include [Hmim]Tfa,[Hmim]Tsa,[Hmim]BF_4,[Bmim]HSO4,[Bmim]H_2PO_4,and[Hmim]BF_4 showed the highest catalytic activity for the preparation of fructone.After reaction,the product could be isolated from the reaction system automatically,and the ionic liquid could be directly reused without dehydration.     

Phase equilibrium and macrolide antibiotics partitioning in real water samples using a two-phase system composed of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate and an aqueous solution of an inorganic salt

An ionic liquid-salt aqueous two-phase system (ILATPS) based on the hydrophilic ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄) and inorganic salt was developed for direct separation and analysis of macrolide antibiotics coupled with molecular fluorescence spectrophotometry. Liquid–liquid equilibria of [Bmim]BF₄-salt aqueous two-phase systems were studied for different salts and temperatures. It was found that the salting-out ability of different salts may be related to the Gibbs energy of hydration of the ions, and the two-phase area was expanded with a decrease in temperature. The partition coefficients as well as extraction efficiencies of azithromycin and mydecamycin in [Bmim]BF₄-salt aqueous two-phase system were influenced by the types of salts, concentration of salt, and the extracting temperature. Under the optimum conditions, the average partition coefficient of azithromycin in [Bmim]BF₄-Na₂CO₃ ILATPS was 162, and that of mydecamycin in [Bmim]BF₄- NaH₂PO₄ ILATPS was 90.9. This method has been satisfactorily applied to the determination of azithromycin and mydecamycin in real water samples with detection limits of 0.059 µg mL^?1 and 0.019 µg mL^?1. This extraction method is a simple, non-toxic and effective sample pretreatment technique with promise also for the separation of other small biomolecules.     

Synthesis of Nipagin Esters Using Acidic Functional Ionic Liquids as Catalysts

Several Brønsted acidic functional ionic liquids (FILs) with an alkane sulfonic acid group were synthesized. These FILs as dual solvent-catalysts for Nipagin esterification reactions were investigated. The results indicated that [HSO₃-pMIM]HSO₄ has the best catalytic activity and recyclability among the various kinds of FILs investigated, and its structure was characterized by infrared and NMR. The [HSO₃-pMIM]HSO₄ could be easily separated from the reaction mixture and reused without noticeably decreasing the catalytic activity.

Facile and Rapid Isolation of Oxypeucedanin Hydrate and Byakangelicin from Angelica dahurica by Using [Bmim]Tf2N Ionic Liquid

Ionic liquids (ILs) have sparked much interest as alternative solvents for plant materials as they provide distinctive properties. Therefore, in this study, the capacity of ILs to extract oxypeucedanin hydrate and byakangelicin from the roots of Angelica dahurica (A. dahurica) was investigated. The back-extraction method was examined to recover target components from the IL solution as well. Herein, [Bmim]Tf₂N demonstrated outstanding performance for extracting oxypeucedanin hydrate and byakangelicin. Moreover, factors including solvent/solid ratio, extraction temperature and time were investigated and optimized using a statistical approach. Under optimum extraction conditions (solvent/solid ratio 8:1, temperature 60 °C and time 180 min), the yields of oxypeucedanin hydrate and byakangelicin were 98.06% and 99.52%, respectively. In addition, 0.01 N HCl showed the most significant ability to back-extract target components from the [Bmim]Tf₂N solution. The total content of both oxypeucedanin hydrate (36.99%) and byakangelicin (45.12%) in the final product exceeded 80%. Based on the data, the proposed approach demonstrated satisfactory extraction ability, recovery and enrichment of target compounds in record time. Therefore, the developed approach is assumed essential to considerably reduce drawbacks encountered during the separation of oxypeucedanin hydrate and byakangelicin from the roots of A. dahurica.     

Extraction of Palladium(II) and Platinum(IV) from Hydrochloric Acid Solutions with Trioctylammonium Nitrate Ionic Liquid without Dilution

The fundamental properties and extraction capability of an ionic liquid (IL), trioctylammonium nitrate ([HTOA][NO₃]), for Pd^II and Pt^IV, are investigated. At room temperature, [HTOA][NO₃] is a solid (melting point: 30.7 °C), but it becomes a liquid (melting point: 16.7 °C) when saturated with water. Water-saturated [HTOA][NO₃] exhibits a viscosity of 267.1 mPa·s and an aqueous solubility of 2.821?×?10^?4 mol·dm^?3 at 25 °C, and can be used as an extraction solvent without dilution. [HTOA][NO₃] exhibits an extremely high extraction capability for Pd^II and Pt^IV in dilute hydrochloric acid (0.1–2 mol·dm^?3 HCl); the distribution ratio reaches 3 × 10⁴ for both the metals. From electrospray ionization mass spectrometry analysis, the species extracted in the IL phase are [PdCl₃]^? and [PdCl₂(NO₃)]^? for Pd^II and [PtCl₆]^2? and [PtCl₅]^? for Pt^IV. A majority of the other transition metals are considerably less or marginally extracted into [HTOA][NO₃] from a 0.1 mol·dm^?3 hydrochloric acid solution. The extraction capacity of [HTOA][NO₃] is greater than that of other hydrophobic ILs such as [HTOA]Cl and bis(trifluoromethanesulfonyl)imide-based ILs. The metals extracted into the IL phase are quantitatively back-extracted using an aqueous solution containing thiourea and nitric acid. By controlling the thiourea concentration and shaking time, Pd^II and Pt^IV are mutually separated to some extent in the back extraction process. The IL phase used for the back extraction can be reused for the forward extraction of these metals after scrubbing it with an aqueous nitric acid solution.     

酸性离子液体催化油酸酯化合成生物柴油简

酸性离子液体具有催化活性好、选择性高及易于回收等优点,是一种应用前景非常好的环境友好的酸性催化剂,在生物柴油合成反应中具有重大的理论意义和应用价值. 本文以油酸和甲醇为原料,探讨了7种不同酸性离子液体在生物柴油合成反应中的催化效应. 研究表明,离子液体酸性越强,催化酯化活性越高;引入磺酸基团可大大增强离子液体Brönsted酸性,使其在酯化反应中发挥溶剂/催化剂的双重作用,促进酯化反应向产物方向进行,达到高产率,因而1-丁基磺酸-3-甲基咪唑硫酸氢盐（[BHSO₃MIM]HSO₄）催化效果最好. 此外,系统研究了[BHSO₃MIM]HSO₄催化油酸与甲醇酯化反应,并采用响应面法优化了反应条件. 结果发现,该反应的最适醇酸摩尔比、催化剂用量、反应温度及反应时间分别为4：1,10%（基于油酸的质量）,130 ℃和4 h;在此条件下,生物柴油产率为97.7%. [BHSO₃MIM]HSO₄连续使用10批次后,仍能保持初始催化活性的95.6%,表现出极好的操作稳定性. 另外,利用该离子液体催化游离脂肪酸含量为72%的废油脂生产生物柴油,反应6 h可获得产率94.9%. 可见,[BHSO₃MIM]HSO₄在酯化生产生物柴油方面具有巨大的应用潜力.     

Ion transport studies in nanocomposite polymer electrolyte membrane of PVA–[C<Subscript>4</Subscript>C<Subscript>1</Subscript>Im][HSO<Subscript>4</Subscript>]–SiO<Subscript>2</Subscript>

The paper reports the effect of SiO₂ nano-filler on structural, thermal, and ion transport properties of polymer electrolyte system comprising polyvinyl alcohol (PVA) and 1-butyl-3-methylimidazolium hydrogen sulfate [C₄C₁Im][HSO₄] ionic liquid. The addition of SiO₂ nano-filler results into enhancement in amorphicity and thermal stability and lowering of glass transition temperature of the membranes. A detailed investigation of possible interactions among the constituents PVA, [C₄C₁Im][HSO₄] and SiO₂, and cation–anion and anion–anion pairs of [C₄C₁Im][HSO₄] in the polymer electrolyte and their dissociation due to SiO₂ filler has been carried out in the membranes using Fourier transform infra-red (FTIR) and Raman spectroscopy. The membranes show maximum room temperature ionic conductivity as 9.9?×?10^?3 S cm^?1 for 6 wt.% of the nano-filler which is about four times higher than the membrane without nano-filler and an order higher than pure [C₄C₁Im][HSO₄]. With temperature, the ionic conductivity shows VTF behavior in the temperature range 40–120 °C. On the basis of FTIR and ion transport results, a model for ion transport in the membranes is proposed.

Open image in new window

Graphical abstract Schematic model of ion transport in nanocomposite polymer electrolyte membrane of PVA-[C₄C₁Im][HSO₄]-SiO₂

     

A Comparative Study of Complexation of β-Cyclodextrin,Calix[4]arenesulfonate and Cucurbit[7]uril with Dye Guests: Fluorescence Behavior and Binding Ability

The complexation behaviors of acridine red (AR), neutral red (NR) and rhodamine B (RhB) dye guest molecules by three kinds of supramolecular hosts, including β-cyclodextrin (β-CD), calix[4]arene tetrasulfonate (C4AS) and cucurbit[7]uril (CB[7]), have been investigated by means of fluorescence spectra in aqueous citrate buffer solution (pH 6.0). The results obtained show that the three hosts, possessing different types of cavity, lead to various complexation-induced fluorescence of dye guests, and present different binding ability and molecular selectivity. The complexation stability constants decrease in the order of NR > AR > RhB for C4AS and CB[7] hosts, while in the order of RhB > AR > NR for β-CD host. Particularly, CB[7] displays the strongest binding ability with NR (K _S = 33300 M^? 1), and provides the molecular selectivity of 4.8 for NR/AR pairs. Although the binding ability of C4AS for present dye guests is weaker than CB[7], but the molecular selectivity of the two hosts are nearly equivalent. β-CD shows stronger binding ability with RhB (K _S = 5880 M^? 1) as comparison with CB[7] and C4AS. Furthermore, the solvent effects and salt effects during the course of complexation have also been investigated.     

Mono-, di-, and trinuclear phosphonate oxygen-bridged copper(II) complexes: syntheses,structures, and properties

Reactions of copper salts, zoledronic acid, and 2,2′-bipyridine/1,10-phenanthroline in aqueous ethanolic solutions afforded four phosphonate oxygen-bridged copper complexes, Cu(bipy)(H₄zdn)(HSO₄) (1), [Cu₂(bipy)₂(H₂zdn)(H₂O)(Cl)]·4H₂O (2), [Cu₂(phen)₂(H₂zdn)(H₂O)(Cl)]·2.5H₂O (3), and [Cu₃(bipy)₃(H₄zdn)(H₂zdn)(SO₄)]·5H₂O (4) (H₅zdn = zoledronic acid, bipy = 2,2′-bipyridine, phen = 1,10-phenanthroline). The copper centers of 1–4 have square pyramidal coordination geometries. The Cu(II) ions are coordinated to bipy/phen, zoledronate, and HSO₄^?/Cl^? forming mononuclear units for 1, dinuclear for 2 and 3, and trinuclear for 4. These building units are further extended into 3-D supramolecular networks via multiple hydrogen bond interactions. Temperature-dependent magnetic properties of 2 and 4 suggest weak antiferromagnetic coupling (J = ?4.53(8) cm^?1 for 2, J = ?1.69(4) cm^?1 for 4). The antitumor activity of 2 was evaluated against the human lung cancer cell line and indicates effective time- and dose-dependent cytotoxic effects.     

Enhanced and suppressed effects of ionic liquid on the photocatalytic activity of TiO2

The effects of a room temperature ionic liquid, 1-butyl-3-methylimidazolium terafluoroborate ([Bmim]BF₄), on the photocatalytic performance of Degussa P25 TiO₂ were investigated. Also, the photocatalysis mechanism was systematically analyzed by conducting different reactive radical trapping experiments. The results showed that photogenerated electrons were the main reactive species involved in the photocatalytic degradation of methyl orange (MO), while ?OH radicals and photogenerated holes played an important role in the photocatalytic decomposition of rhodamine B (RhB). The addition of ionic liquid (IL) could slightly enhance the photocatalytic degradation rate of MO because adsorption of [Bmim]⁺ ions on the TiO₂ surface not only enhanced traping and transfer of photogenerated electrons, but also facilitated adsorption of negatively charged MO. On the contrary, IL suppressed the degradation rate of RhB because [Bmim]⁺ on the TiO₂ surface not only hindered the access of positively charged RhB to TiO₂, but also restricted the diffusion of positively charged holes to the TiO₂/solution interface.     

A greener electrochromic liquid crystal based on ionic liquid electrolytes

An electrochromic liquid crystal (ECLC) material composed of only liquid crystal (LC) and ionic liquid (IL) was developed. The LC containing the substituted diphenylacetylene serves as electrochromic (EC) material to realise transmittance and colour change under the direct current (DC) field, while the IL with the designable cation and anion served as electrolyte. Herein, a series of IL electrolytes was screened to investigate how IL tunes the electro-optic performance of the ECLC cell. By testing the electrochemistry window of ILs in EC cells, IL with the [NTf₂]^? anion shows adequate electrochemical stability when the EC material undergoes oxidation and reduction. The electro-optic performance of ECLC containing 1-ethoxy-4-[2-(4-pentylphenyl) ethynyl]-benzene (PEB) and IL was then evaluated by UV-vis spectrometry under the control of an electrochemical work station. Compared with other PEB-IL, PEB-[Bmim][NTf₂] with [Bmim][NTf₂] electrolyte shows a satisfactory transmittance at low operating voltage. Furthermore, Pd NPs in situ formed in [Bmim][NTf₂] reduced the EC potential and improved the light scattering of the ECLC cell. In this work, we also designed a bifunctional device based on polymer dispersed liquid crystal (PDLC) that hosts electrochromic guest molecules, and analysed the electro-optical and electrochromic properties of LC electrolyte mixtures, in order to gain control of the incident daylight and glare in building and automotive applications.     

N-methyl-2-pyrrolidonium-based Brönsted-Lewis acidic ionic liquids as catalysts for the hydrolysis of cellulose

We experimentally studied the catalytic performances of a series of Br?nsted-Lewis acidic N-methyl-2-pyrrolidonium metal chlorides([Hnmp]Cl/MCl_x, where M=Fe, Zn, Al, or Cu) for the hydrolysis of microcrystalline cellulose(MCC) and cotton to produce reducing sugar. A variety of factors, such as temperature, time, ionic liquid(IL) species, IL dosage, and the concentration of the metal chloride were investigated. [Hnmp]Cl/FeCl_3 presented the best hydrolysis performance, affording a 98.8% yield of total reducing sugar from MCC(1 h, 100 °C, 0.1 g MCC, 0.2 g acidic IL, 2.0 g [Bmim]Cl as solvent), which is better than or comparable to results previously obtained with other –SO_3H functionalized acidic ILs. The hydrolysis performances of [Hnmp]Cl/MClx were rationalized using density functional theory calculations, which indicated that interactions between the metal chlorides and the cellulose, including charge-transfer interactions are important in the hydrolysis of cellulose and degradation of glucose. This work shows that Br?nsted-Lewis acidic ILs are potential catalysts for the hydrolysis of cellulose to produce sugar.     

The synthesis of polyoxometalate-based metal-organic frameworks under ionothermal conditions

Using ionic liquid (IL) [Bmim]Br (Bmim=1-butyl-3-methylimidazolium) as solvent has resulted in a polyoxometalate-based metal-organic framework (PMOFs), [Cu^IBbi]₄SiW₁₂O₄₀·H₂O (1) [Bbi=1,1-(1,4-butanediyl)-bis(imidazole)], and was produced via an ionothermal route. Its structure was determined by single-crystal X-ray diffraction. Compound 1 is a 1-D ladder with large voids, resulting in a 3-D supermolecular structure using the classic Keggin-type anion as a second building block. This means utilizing ILs to construct 3-D PMOFs can be efficiently realized. Additionally, electrochemical, electrocatalytic, and photocatalytic properties of 1 were studied.     

Influence of [BMIM]HSO4 on electrodeposition and corrosion behavior of Zn coatings from acidic sulfate bath

The effect of 1‐butyl‐3‐methylimidazolium hydrogen sulfate‐[BMIM]HSO₄ on the nucleation and growth of zinc from acidic sulfate bath was investigated at a glassy carbon (GC) electrode using cyclic voltammetry, chronoamperometric and scanning electron microscopy techniques. Dimensionless chronoamperometric current‐time transients for the electrodeposition of zinc on GC from the bath free of [BMIM]HSO₄ were in good accord with the theoretical transients for the limiting case of instantaneous three‐dimensional nucleation with diffusion‐controlled growth of the nuclei. The addition of [BMIM]HSO₄ was found to have a blocking effect on the electrodeposition of zinc and led to decrease of the nucleation and growth rate of nuclei. In addition, the instantaneous nucleation mechanism observed in the additive‐free bath was changed to a more progressive one when [BMIM]HSO₄ was present in the bath. Surface morphology analysis indicated that [BMIM]HSO₄ can induce the formation of finer grained deposits by the adsorption of additive in the first stages of deposition. The corrosion behavior of Q235 steel with coating by a thin layer of zinc in the absence and presence of [BMIM]HSO₄ was examined in 3.5% NaCl solution. The Zn coating obtained from the additive‐containing baths exhibited more excellent protection of the base metal in comparison to the additive‐free one. Copyright © 2012 John Wiley & Sons, Ltd.     

Modification of the Extended UNIQUAC Model to Study the Phase Behavior of the [Bmim]Cl–K<Subscript>2</Subscript>HPO<Subscript>4</Subscript> Aqueous Two Phase System at 298.15 K

Aqueous two phase systems (ATPS), consisting of two incompatible aqueous solutions, are widely used in biological extraction. In recent years, many experimental studies on the phase behavior of ionic liquid(IL)–inorganic salt ATPS systems have been reported but few investigations of the thermodynamics of the IL-based ATPS have been reported. In this work, the Extended UNIQUAC model is modified to calculate the equilibrium of [Bmim]Cl–K₂HPO₄–H₂O ATPS at 298.15 K. All the interaction parameters of the model are salt specific. The results show that the experimental compositions of tie lines are correlated successfully using the proposed model. The root mean square deviation of the mass fraction is 0.0256.     

Separation and Extraction of Uranium from Leach Liquor Containing Uranium and Molybdenum by Solvent Extraction with LIX 622N

The leach liquor (0.5 g/L Mo, 0.05 g/L U) obtained from the leaching process of molybdenum-uranium ore material was treated using solvent extraction to recover U(VI) by LIX 622N, which is a salicylaldoxime derivative. The influence of various basic variables such as pH, concentration of LIX 622N, temperature, different stripping reagents, phase ratio, and diluents was examined. Using 10% LIX 622N with the aqueous solution of equilibrium pH 6.0 and a phase ratio organic phase:aqueous phase (O:A) = 1:1, a two-stage McCabe-Thiele plot was constructed, which showed 99.9% of U extraction with no co-extraction of molybdenum. This was confirmed by a 6-cycle counter current simulation (CCS) study. The obtained data of temperature on the extraction of uranium showed that the extraction process is exothermic with enthalpy change of ?20.949 kJ mol^?1. The stripping of U(VI) was quantitative using 4 M H₂SO₄. The stable complex UO₂(HSO₄)R_org formed during extraction, which supports the cation exchange mechanism, and was confirmed by FTIR spectral analysis.      

Reactions of a Polyhalide Ionic Liquid with Copper,Silver, and Gold

The reactions of copper, silver, and gold with the imidazolium-based polyhalide ionic liquid (IL) [C₆C₁Im][Br₂I] were investigated by using X-ray photoelectron spectroscopy (XPS), weight-loss measurements, and gas-phase mass spectrometry. All three Group 11 metals are strongly corroded by the IL at moderate temperatures to give a very high content of dissolved Cu^I, Ag^I, and Au^I species. The IL–metal solutions are stable against contact with water and air. The replacement of imidazolium with inorganic sodium cations decreased metal corrosion rates by orders of magnitude. Our results clearly indicate metal oxidation by iodide from dibromoiodide anions to form molecular iodine and anionic [Br-M^I-Br]⁻ (M=Cu, Ag, Au) complexes stabilized by imidazolium counterions. From experiments with a trihalide IL with imidazolium methylated at the 2-position, we ruled out the formation of imidazole–carbene as a cause of the observed corrosion. In contrast to Group 11 metals, molybdenum is inert against the trihalide IL, which is attributed to surface passivation.