Efficient utilization of inulin and glycerol as fermentation substrates in erythritol and citric acid production using <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> expressing inulinase

Inulin and glycerol were used as substrates for efficient erythritol and citric acid production by newly engineered Yarrowia lipolytica strains. Hydrolysis of inulin by the Y. lipolytica Wratislavia K1 strain was established by expressing the Kluyveromyces marxianus INU1 gene. Erythritol was produced in two stages: inulin was used for biomass formation, followed by erythritol biosynthesis initiated by glycerol addition. The highest titer of erythritol obtained, 120.9 g L^?1 with the yield of 0.6 g g^?1, was produced by the K1 INU 6 strain. Moreover, the K1 INU 6 strain in fed-batch culture produced a high amount of citric acid: 105.2 g L^?1 after 235 h from 200 g L^?1 of inulin. Maximum activity of inulinase during this culture was 14000 U g^?1 of cell dry mass. The presented study proves the potential of new Y. lipolytica transformants for efficient erythritol and citric acid production from inexpensive raw materials such as inulin and glycerol.     

Screening of <Emphasis Type="Italic">Isochrysis</Emphasis> Strains and Utilization of a Two-Stage Outdoor Cultivation Strategy for Algal Biomass and Lipid Production

Isochrysis is a genus of marine algae without cell wall and capable of accumulating lipids. In this study, the lipid production potential of Isochrysis was assessed by comparing 15 Isochrysis strains with respect to their growth rate, lipid production, and fatty acid profiles. Three best strains were selected (lipid productivity, 103.0~121.7 mg L^?1 day^?1) and their lipid-producing capacities were further examined under different controlled parameters, e.g., growth phase, medium nutrient, and light intensity in laboratory cultures. Furthermore, the three Isochrysis strains were monitored in outdoor panel photobioreactors with various initial cell densities and optical paths, and the strain CS177 demonstrated the superior potential for outdoor cultivation. A two-stage semi-continuous strategy for CS177 was subsequently developed, where high productivities of biomass (1.1 g L^?1 day^?1) and lipid (0.35 g L^?1 day^?1) were achieved. This is a comprehensive study to evaluate the lipid-producing capability of Isochrysis strains under both indoor and outdoor conditions. Results of the present work lay a solid foundation for the physiological and biochemical responses of Isochrysis to various conditions, shedding light on the future utilization of this cell wall-lacking marine alga for biofuel production.     

Production of <Emphasis Type="Italic">R</Emphasis>-Mandelic Acid Using Nitrilase from Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Cells Immobilized with Tris(Hydroxymethyl)Phosphine

Recombinant Escherichia coli cells harboring nitrilase from Alcaligenes faecalis were immobilized using tris(hydroxymethyl)phosphine (THP) as the coupling agent. The optimal pH and temperature of the THP-immobilized cells were determined at pH 8.0 and 55 °C. The half-lives of THP-immobilized cells measured at 35, 40, and 50 °C were 1800, 965, and 163 h, respectively. The concentration of R-mandelic acid (R-MA) reached 358 mM after merely 1-h conversion by the immobilized cells with 500 mM R,S-mandelonitrile (R,S-MN), affording the highest productivity of 1307 g L^?1 day^?1 and the space-time productivity of 143.2 mmol L^?1 h^?1 g^?1. The immobilized cells with granular shape were successfully recycled for 60 batches using 100 mM R,S-MN as substrate at 40 °C with 64% of relative activity, suggesting that the immobilized E. coli cells obtained in this study are promising for the production of R-MA.     

Application of Physicochemical Treatment Allows Reutilization of <Emphasis Type="Italic">Arthrospira platensis</Emphasis> Exhausted Medium

Since cultivations of Arthrospira platensis have a high water demand, it is necessary to develop treatment methods for reusing the exhausted medium that may prevent environmental problems and obtaining useful biomass. The exhausted Schlösser medium obtained from A. platensis batch cultivation in bench-scale mini-tanks was treated by varying concentrations of different coagulants, ferric chloride (6, 10, and 14 mg L^?1) or ferric sulfate (15, 25, and 35 mg L^?1) and powdered activated carbon (PAC, 30 and 50 mg L^?1). Such treated effluent was restored with NaNO₃ and reused in new cultivations of A. platensis performed in Erlenmeyer flasks. Reusing media through the cultivation of A. platensis showed satisfactory results, particularly in the medium treated with ferric chloride and PAC. The maximum cell concentration obtained in the flasks was 1093 mg L^?1, which corresponded to the medium treated with ferric chloride (6 mg L^?1) and PAC (30 mg L^?1). This cellular growth was higher than in the medium treated with ferric sulfate and PAC, in which values of maximum cell concentration did not exceed 796 mg L^?1. The cultures in the media after treatment did not modify the biomass composition. Thus, combined coagulation/adsorption processes, commonly used in water treatment processes, can be efficient and viable for treating exhausted medium of A. platensis, allowing the production of such biomass with the reduction of production cost and saving water.     

Single-cell Protein and Xylitol Production by a Novel Yeast Strain <Emphasis Type="Italic">Candida intermedia</Emphasis> FL023 from Lignocellulosic Hydrolysates and Xylose

Yeasts are good candidates to utilize the hydrolysates of lignocellulose, the most abundant bioresource, for bioproducts. This study aimed to evaluate the efficiencies of single-cell protein (SCP) and xylitol production by a novel yeast strain, Candida intermedia FL023, from lignocellulosic hydrolysates and xylose. This strain efficiently assimilated hexose, pentose, and cellubiose for cell mass production with the crude protein content of 484.2 g kg^?1 dry cell mass. SCP was produced by strain FL023 using corncob hydrolysate and urea as the carbon and nitrogen sources with the dry cell mass productivity 0.86 g L^?1 h^?1 and the yield of 0.40 g g^?1 sugar. SCP was also produced using NaOH-pretreated Miscanthus sinensis straw and corn steep liquor as the carbon and nitrogen sources through simultaneous saccharification and fermentation with the dry cell productivity of 0.23 g L^?1 h^?1 and yield of 0.17 g g^?1 straw. C. intermedia FL023 was tolerant to 0.5 g L^?1 furfural, acetic acid, and syringaldehyde in xylitol fermentation and produced 45.7 g L^?1 xylitol from xylose with the productivity of 0.38 g L^?1 h^?1 and the yield of 0.57 g g^?1 xylose. This study provides feasible methods for feed and food additive production from the abundant lignocellulosic bioresources.     

Production of camptothecin in the elicited callus cultures of <Emphasis Type="Italic">Nothapodytes nimmoniana</Emphasis> (J. Graham) Mabberly

The biotechnological approach of in vitro cultures elicitation offers an alternative strategy for the production of camptothecin (CPT) in Nothapodytes nimmoniana to mitigate indiscriminate harvest of the endangered natural population for the alkaloid. Yeast extract (YE) and vanadyl sulfate (VS) elicitors were used to enhance the biosynthesis of CPT in hypocotyl-derived callus cultures of N. nimmoniana by cultivation using solid and liquid Murashige and Skoog (MS) medium amended with NAA + BAP (2.0 + 1.0 mg L^?1). Effects of the two elicitors on biomass and CPT production at 6.25, 12.5, 25, 50 and 75 mg L^?1 concentrations using callus cultures from three cell lines were evaluated after 15, 30 and 45 days culture. Yeast extract elicitor treatments showed a linear enhancement effect on biomass and CPT production up to 50 mg L^?1 YE and beyond the concentrations, no significant effect was observed. Enhanced biomass and CPT production were achieved with VS elicitor up to 25 mg L^?1 concentrations but, 50 and 75 mg L^?1 VS had minimal effects on biomass and CPT production in callus sources and incubation duration-dependent manner. The intracellular yield of CPT in liquid media-cultivated cultures at concentrations of the two elicitors was lower when compared to solid media treatments relative control due to the extracellular accumulation but, higher overall production. Accumulation of the biomass showed association with produced CPT in the elicitor treatments and control cultures.     

Erythritol biosynthesis from glycerol by <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> yeast: effect of osmotic pressure

The aim of this study was to examine the impact of osmotic pressure, regulated by an addition of different NaCl concentrations, on the production parameters and activity of the enzymes involved in the biosynthesis of erythritol from glycerol by Yarrowia lipolytica yeast. In the bioreactor batchcultures, strain A-3 was able to produce from 25.3 g dm^?3 to 84.7 g dm^?3 of erythritol from 150 g dm^?3 of glycerol depending on the initial osmotic pressure. At the osmolality of 4.2 mol kg^?3 or higher, a long lag-phase was observed. An enhancement of the production parameters was observed in a culture with the osmotic pressure maintained at an equal level by a step-wise addition of NaCl. The two-hour exposure of strain A-3 cells to 75 g dm^?3 of NaCl resulted in decreased activity of glycerol kinase and glycerol-3-phosphate dehydrogenase by about 78 % and 25 %, respectively. The activity of transketolase and erythrose reductase remained unchanged after the salt addition. It was demonstrated that assimilation of glycerol was effective at lower osmotic pressures and that transketolase and erythrose reductase played a significant role in the erythritol formation in Y. lipolytica.     

Co-production of Fructooligosaccharides and Levan by Levansucrase from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> natto with Potential Application in the Food Industry

Fructooligosaccharides and levan have a wide range of applications in the food industry due to their physiological and functional properties. The enzymatic synthesis of these molecules exhibits great advantages when compared with microbial fermentation. In this study, the production of levansucrase from Bacillus subtilis natto and its utilization in fructooligosaccharides and levan syntheses using different reaction conditions were described. The best condition for levansucrase production was 420.7 g L^?1 of sucrose at pH 7.0, which reached 23.9 U ml^?1 of transfructosylation activity. In a bioreactor, the highest production of fructooligosaccharides was 41.3 g L^?1 using a medium containing 350 g L^?1 sucrose at 35 °C for 36 h. The enzymatic synthesis of levan resulted in 86.9 g L^?1 when conditions similar to those used for fructooligosaccharides synthesis were applied. These results indicate that the levansucrase from B. subtilis natto could be applied for the co-production of fructooligosaccharides and levan, which are biomolecules that have health benefits and are used successfully in the food industry.     

Ethanol Production from Starch Hydrolyzates using <Emphasis Type="Italic">Zymomonas mobilis</Emphasis> and Glucoamylase Entrapped in Polyvinylalcohol Hydrogel

The glucoamylase from Aspergillus niger, immobilized into poly(vinylalcohol) hydrogel lens-shaped capsules LentiKats®, was used for simultaneous saccharification and fermentation (SSF) with Zymomonas mobilis in free form. This system was stable in both the repeated batch and continuous mode of SSF. The microorganism was found to adsorb on the capsules with immobilized enzyme. This increased the ethanol productivity of the repeated batch system with 5% w/v of immobilized glucoamylase almost 2.1 times (7.2 g l^?1 h^?1) compared to free enzyme–free microorganism system (3.5 g l^?1 h^?1). The continuous SSF with the immobilized glucoamylase (11.5% w/v) tested for 15 days had productivity 10 g l^?1 h^?1, which is comparable to continuous experiments on semi-defined glucose medium (10 g l^?1 h^?1). These two systems were stable in both glucoamylase activity and microorganism productivity.     

Growth of Cyanobacteria: Optimization for Increased Carbohydrate Content

Growths of Lyngbya limnetica and Oscillatoria obscura were investigated at varying pH, light intensity, temperature, and trace element concentration with a view to optimize these parameters for obtaining the maximum carbohydrate content. The maximum growth for both strains was obtained at pH 9.0 and temperature 20 ± 3 °C using a light intensity of 68.0 μmol m^?2 s^?1 with continuous shaking. Growth under the nitrogen starvation condition affected the carbohydrate content more compared to the phosphorus starvation, and maximum concentrations were found as 0.660 and 0.621 g/g of dry biomass for L. limnetica and O. obscura, respectively. Under the optimized nitrogen-rich conditions, the specific growth rates for the two strains were found to be 0.187 and 0.215 day^?1, respectively. The two-stage growth studies under nitrogen-rich (stage I) followed by nitrogen starvation (stage II) conditions were performed, and maximum biomass and carbohydrate productivity were found as 0.088 and 0.423 g L^?1 day^?1 for L. limnetica. This is the first ever attempt to evaluate and optimize various parameters affecting the growth of cyanobacterial biomass of L. limnetica and O. obscura as well as their carbohydrate contents.     

Efficient Biotransformation of Phytosterols to Dehydroepiandrosterone by <Emphasis Type="Italic">Mycobacterium</Emphasis> sp.

In this study, a method for the efficient production of dehydroepiandrosterone (DHEA) from phytosterols in a vegetable oil/aqueous two-phase system by Mycobacterium sp. was developed. After the 3-hydroxyl group of phytosterols was protected, they could be converted into DHEA with high yield and productivity by Mycobacterium sp. NRRL B-3683. In a shake flask biotransformation, 15.05 g l^?1 of DHEA and a DHEA yield of 85.39% (mol mol^?1) were attained after 7 days with an initial substrate concentration of 25 g l^?1. When biotransformation was carried out in a 30-l stirred bioreactor with 25 g l^?1 substrate, the DHEA concentration and yield was 16.33 g l^?1 and 92.65% (mol mol^?1) after 7 days, respectively. The results of this study suggest that inexpensive phytosterols could be utilized for the efficient production of DHEA.     

A Phenylurea Cytokinin,CPPU, Elevated Reducing Sugar and Correlated to Andrographolide Contents in Leaves of <Emphasis Type="Italic">Andrographis paniculata</Emphasis> (Burm. F.) Wall. Ex Nees

Cytokinins are phytohormones that play multiple roles to control plant growth and development. In this study, leaf biomass and the production of andrographolide compounds in a medicinal plant Andrographis paniculata were significantly increased after exogenously treating with the synthetic cytokinin cytokinin-1-(2-chloro-4-pyridyl)-3-phenylurea (CPPU) at 0 (water), 5, or 10 mg L^?1 and observed the results for 24 h, 48 h, and 7 days of treatment. It was found that CPPU could significantly enhance new axillary bud formation and further promote branching 4.6–5.6-fold higher, resulting in higher fresh weight (FW) and dry weight (DW) than the control. Application of CPPU at 5 mg L^?1 significantly promoted the highest contents of total reducing sugar at 2.5-fold in leaves and at 1.5-fold in roots. Although treatments of CPPU significantly affected the increasing contents of chlorophyll and carotenoid (1.2–1.6-fold), CPPU at 10 mg L^?1 slightly caused leaf stress and chlorophyll reduction. Interestingly, 5 mg L^?1 CPPU could enhance andrographolide content, an active anti-infectious compound in Andrographis paniculata (2.2-fold higher than the control) that reached the highest content at 24 h after treatment. This study suggested that CPPU should be suitable for field application to promote leaf yields and induce the production of useful pharmaceutical compounds in Andrographis paniculata.     

<Emphasis Type="Italic">cis</Emphasis>-Dioxomolybdenum(VI) complexes of sterically encumbered phenol-based tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> ligands: Structural,spectroscopic, and electrochemical studies

Two cis-dioxomolybdenum(VI) complexes [MoO₂L] (L: L ¹, 2 and L: L ², 3) in a phenol-based sterically encumbered N₂O₂ ligand environment have been synthesized, and their crystallographic characterizations are reported. The orange crystals of 2 are monoclinic, space group P2₁/a with unit cell dimensions as a=16.2407(17) Å, b=7.2857(8) Å, c=18.400(2) Å, β=98.002(9)°, Z=4, and d _cal=1.486 g cm^?3. The light orange crystals of 3, however, are orthorhombic, space group, Pbcn, with unit cell dimensions a=8.3110(12) Å, b=12.637(3) Å, c=34.673(5) Å, Z=4, and d _cal=1.187 g cm^?3. The structures were refined by a full-matrix least-squares procedure on F ² to a final R=0.046 (0.055 for 3) using 4944 (3677) all independent data. In both the cases, the Mo atom exists in a distorted octahedral geometry defined by a N₂O₄ donor set, which features a cis-Mo(–O)₂ and a trans-Mo(OPh)₂ arrangement. Compound 2 undergoes a quasireversible one-electron reduction at ?1.3 V vs Ag/AgCl reference due to Mo^VIO₂/Mo^VO₂ electron transfer and thus providing a rare example of steric solution to the comproportionation–dimerization problem encountered frequently in the development of valid biomimetic models for the active sites of oxomolybdenum enzymes.     

Optimal Production of a <Emphasis Type="Italic">Rhodococcus erythropolis</Emphasis> ATCC 4277 Biocatalyst for Biodesulfurization and Biodenitrogenation Applications

Rhodococcus sp. has a broad catabolic diversity and unique enzymatic capabilities, and it is able to adapt under extreme conditions. Thereby, the production of this remarkable bacterium has a great biotechnological and industrial importance. In this sense, we sought to improve the R. erythropolis ATCC 4277 growth through a central composite design, by varying the components of nutrient medium (glucose, malt extract, yeast extract, CaCO₃), temperature, and agitation. It was found that the concentrations of glucose and malt extract are not statistically significant, being reduced of 4.0 and 10.0 g L^-1 to 2.0 and 5.0 g L^?1, respectively. The CaCO₃ concentration and temperature were also diminished of 2.0 to 1.16 g L^?1and 28 to 23.7 °C, respectively. Optimal growth conditions provided a 240% increase in final biomass concentration, an increment in specific growth rate, and a growth yield coefficient about five times greater. Application of the optimal conditions in biodesulfurization and biodenitrogenation processes showed that desulfurization capability is not associated with optimal growth conditions; however, it was achieved a 47% of nitrogen removal in the assay containing 10% (w/w) of heavy gas oil.

Open image in new window

Graphical Abstract ?

     

Production and characterization of surfactant-stable fungal keratinase from <Emphasis Type="Italic">Gibberella intermedia</Emphasis> CA3-1 with application potential in detergent industry

Surfactant-stable keratinases with good properties are promising candidates for extensive applications in detergent industries. A novel fungal keratinase-producing strain, Gibberella intermedia CA3-1, is described in this study. The keratinase production medium was optimized and composed of 10 g L^?1 of wool powder, 5 g L^?1 of tryptone, 10 g L^?1 of maltodextrin and 0.5 g L^?1 of NaCl. Keratinase activity was increased up to 109 U mL^?1 from 15 U mL^?1 by culture optimization. The optimal reaction pH and temperature of the enzyme were 9.0 and 60°C, respectively. The keratinase activity could be improved by sodium dodecyl sulphate (SDS), and it remained stable in the presence of several surfactants and commercial detergents. G. intermedia keratinase was proved to completely remove blood stains from cotton cloth when combined with detergents. These findings indicate that this fungal keratinase is a promising catalyst for the application in detergent industry. To our knowledge, this is the first report on keratinase production by Gibberella genus.     

Oxygen transfer rate and pH as major operating parameters of citric acid production from glycerol by <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> W29 and CBS 2073

The amount of citric acid (CA) produced by Yarrowia lipolytica is dependent on the yeast strain and growth conditions such as pH, oxygen availability and medium composition. In this work, an experimental design based on the Taguchi method was applied to evaluate the effect of parameters: pH, carbon/nitrogen (C/N) ratio in the medium, oxygen mass transfer rate (OTR) and salts concentration, on the CA production by two Y. lipolytica strains, W29 (ATCC 20460) and CBS 2073. OTR and pH showed higher influence on the CA production for both strains. The increase of OTR from air to the culture medium led to a two- and three-fold improvement of the CA production by Y. lipolytica CBS 2073 and W29, respectively. Besides the individual effects of the parameters, a significant influence of the interaction between these parameters was observed, mainly between OTR and salts. Different values of the parameters were found at the optimum conditions for each strain, but the theoretically predicted and experimentally obtained citric acid concentrations (c_CA) were approximately 10 g L^?1 for both strains. The optimal conditions were also validated employing crude glycerol from biodiesel industry as a substrate, and similar behavior of the strains was observed.     

Electrochemical sensing of <Emphasis Type="SmallCaps">D</Emphasis>-penicillamine on modified glassy carbon electrode by using a nanocomposite of gold nanoparticles and reduced graphene oxide

A new electrochemical sensor was developed for determination of D-penicillamine using glassy carbon electrode which had been modified by gold nanoparticles–reduced graphene oxide nanocomposite (AuNPs/RGO/GCE) in aqueous solution. Cyclic voltammetry, transmission electron microscopy and electrochemical impedance spectroscopy were used for characterization of the modified electrode. The results indicated that the kinetic of oxidation reaction of D-penicillamine at the surface of the electrode was controlled by both diffusion and adsorption processes. In 0.1 mol L^?1 phosphate buffer (pH 2.0), the oxidation current increased linearly with concentration of D-penicillamine with a linear range of 5.0 × 10^?6 to 1.1 × 10^?4 mol L^?1 and regression coefficient of R ² = 0.9972. Theoretical detection limit, defined based on 3σ of the blank signal (n = 9) divided by the slope of the linear regression equation, was 3.9 × 10^?6 mol L^?1 D-penicillamine using differential pulse voltammetry. The developed method was successfully applied to the determination of D-penicillamine in pharmaceutical formulation and blood serum samples.     

CO<Subscript>2</Subscript> Biofixation of <Emphasis Type="Italic">Actinobacillus succinogenes</Emphasis> Through Novel Amine-Functionalized Polystyrene Microsphere Materials

CO₂-derived succinate production was enhanced by Actinobacillus succinogenes through polystyrene (PSt) microsphere materials for CO₂ adsorption in bioreactor, and the adhesion forces between A. succinogenes bacteria and PSt materials were characterized. Synthesized uniformly sized and highly cross-linked PSt microspheres had high specific surface areas. After modification with amine functional groups, the novel amine-functionalized PSt microspheres exhibited a high adsorption capacity of 25.3 mg CO₂/g materials. After addition with the functionalized microspheres into the culture broth, CO₂ supply to the cells increased. Succinate production by A. succinogenes can be enhanced from 29.6 to 48.1 g L^?1. Moreover, the characterization of interaction forces between A. succinogenes cells and the microspheres indicated that the maximal adhesive force was about 250 pN. The amine-functionalized PSt microspheres can adsorb a large amount of CO₂ and be employed for A. succinogenes anaerobic cultivation in bioreactor for high-efficiency production of CO₂-derived succinate.     

Evaluation of a novel composite based on functionalized multi-walled carbon nanotube and iron phthalocyanine for electroanalytical determination of isoniazid

A novel platform for electroanalysis of isoniazid based on graphene-functionalized multi-walled carbon nanotube as support for iron phthalocyanine (FePc/f-MWCNT) has been developed. The FePc/f-MWCNT composite has been dropped on glassy carbon forming FePc/f-MWCNT/GC electrode, which is sensible for isoniazid, decreasing substantially its oxidation potential to +200 mV vs Ag/AgCl. Electrochemical and electroanalytical properties of the FePc/f-MWCNT/GC-modified electrode were investigated by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electrochemical microscopy, and amperometry. The sensor presents better performance in 0.1 mol L^?1 phosphate buffer at pH 7.4. Under optimized conditions, a linear response range from 5 to 476 μmol L^?1 was obtained with a limit of detection and sensitivity of 0.56 μmol L^?1 and 0.023 μA L μmol^?1, respectively. The relative standard deviation for 10 determinations of 100 μmol L^?1 isoniazid was 2.5%. The sensor was successfully applied for isoniazid selective determination in simulated body fluids.     

Characterization of Truncated <Emphasis Type="Italic">dsz</Emphasis> Operon Responsible for Dibenzothiophene Biodesulfurization in <Emphasis Type="Italic">Rhodococcus</Emphasis> sp. FUM94

Numerous desulfurizing bacteria from the Rhodococcus genus harbor conserved dsz genes responsible for the degradation of sulfur compounds through 4S pathway. This study describes a newly identified desulfurizing bacterium, Rhodococcus sp. FUM94, which unlike previously identified strains encodes a truncated dsz operon. DNA sequencing revealed a frameshift mutation in the dszA gene, which led to an alteration of 66 amino acids and deletion of other C-terminal 66 amino acids. The resulting DszA polypeptide was shorter than DszA in Rhodococcus sp. IGTS8 reference strain. Despite the truncation, desulfurizing activity of the operon was observed and attributed to the removal of an overlap of dszA and dszB genes, and lack of active site in the altered region. Desulfurization experiments resulted in specific production rate of 6.3 mmol 2-hydroxy biphenyl (kgDCW)^?1 h^?1 at 2 g l^?1 biocatalyst concentration and 68.8% biodesulfurization yield at 20 g l^?1 biocatalyst concentration, both at 271 μM dibenzothiophene concentration which is comparable to similar wild-type biocatalysts.