氨基两亲高分子磁性微球的制备与表征

采用分散聚合法,以乙醇水为介质,在Fe3O4磁流体存在下,通过苯乙烯与聚氧乙烯大分子单体(MPEO)共聚制备了同时具有两亲性和磁响应性的端基为氨基的高分子微球.改变聚合条件可以得到平均粒径范围在5～80μm,氨基含量为0.01～0.25mmolg的两亲磁性高分子微球.     

超顺磁性高分子微球的制备与表征

用化学共沉淀方法制备了Fe3O4纳米微粒,并用油酸(十八烯酸)和十二烷基苯磺酸钠为双层表面活性剂进行表面修饰,制备了稳定的水分散性纳米Fe3O4可聚合磁流体.在Fe3O4磁流体存在下,将苯乙烯与甲基丙烯酸通过乳液聚合方法制备了磁性高分子微球.透射电镜研究表明,Fe3O4微粒的平均粒径在10nm左右,乳液聚合形成的磁性高分子微球的粒径平均约为130nm;用超导量子干涉仪对微粒及高分子微球进行了磁性表征,结果表明,合成的Fe3O4纳米微粒以及磁性高分子微球均具有超顺磁性.同时,还用红外光谱及X射线衍射表征了磁性高分子微球的化学成分和晶体结构.用热失重方法测得磁性高分子微球中磁性物质的含量为23.6%.     

含羟基磁性高分子微球的合成及表征

采用分散聚合法，以Ｆｅ３Ｏ４粉末为磁核，苯乙烯－甲基丙烯酸羟乙酯共聚物为高分子壳层、合成了带羟基的磁性复合高分子微球。Ｆｅ３Ｏ４与苯乙烯等油溶性单体亲合性差，有聚乙二醇溶液处理磁粉增强其表面亲水、亲油性。控制合成条件，成可以得到粒径为５０－５００μｍＦｅ３Ｏ４含量为０．５－２．５％的磁性微球。     

用于生物探测的PAMAM树形高分子增强免疫磁性微球

采用悬浮聚合的方法制备羧基修饰的聚苯乙烯磁性微球(CMM)，研究了CMM和CMM-PAMAM(第5代)两者与牛血清蛋白(BSA)的结合状况。结果显示；CMM与BSA的结合量为22.2μg／mg。PAMAM偶联在磁性微球表面后，提高了磁性微球表面官能团的密度，因而CMM-PAMAM(第5代)与BSA的结合量可达54．4μg／mg。     

单分散亚微米级磁性微球的合成

以磁性氧化铁胶体粒子为种子粒子，采用吸附－溶胀法，进行苯乙烯－丙烯酸－二乙烯基苯的乳液聚合，制备亚微米级磁性高分了微球。研究了分散介质、丙烯酸、种子粒子、苯乙烯和ＰＨ调节剂等因素对聚合行为和磁性微球的影响，成功地合成了平均粒径为０．１３和０．２７μｍ、单分散性很好的磁性微球。     

磁性高分子微球的制备和应用研究进展

磁性高分子微球是近２０年来研究的一类新型功能材料，在生物医学，细胞学和生物工程等领域有着广泛的应用前景，本文对磁性高分子微球的性质，制备方法及功能经方法作了详细评述，介绍了磁性高分子微球在细胞分离，固定化酶，免疫测定，生物导弹，ＤＮＡ分离及核酸杂交等领域的应用。     

分散聚合法合成磁性高分子微球

在磁流体存在下,以聚乙二醇(w=4000)为分散剂,乙醇/水为分散介质,进行苯乙烯—丙烯酸—二乙烯基苯的分散聚合,合成具有磁核的聚苯乙烯微球。磁性聚苯乙烯微球的红外光谱显示出磁性氧化铁的特征吸收峰(580cm~(-1)),微球内部磁性氧化铁含量可控制,500-4000μg/g之间。考察了磁流体、聚乙二醇、分散介质和丙烯酸对微球磁响应性和粒径的影响。合成了粒径为1-10μm的磁性高分子微球。     

交联聚苯乙烯单分散微球的制备

微米级粒度均匀的聚合物微球作为功能高分子材料在分析化学、生物化学、标准计量以及某些高新技术领域中应用广泛。制备聚合物微球的传统方法有乳液和悬浮聚合法。乳液聚合只能制备粒径为0．1-0．7μm的颗粒，采用无皂或低皂乳液聚合法制成的单分散聚合物微球粒径接近1μm，但难于达到1μm以上，且后处理比较麻烦；悬浮聚合制备的聚合物微球粒径则一般在100-1000μm之间，且是多分散性的。而分散聚合获得的微球呈单分散性，是制备粒径为1-10μm的单分散聚合物微球的有效方法。     

磁性PMMA微球的制备与表面修饰

开发了一种制备磁性高分子微球的喷流式悬浮聚合反应新方法. 在疏水性Fe₃O₄磁流体存在下, 以甲基丙烯酸甲酯(MMA)为聚合单体, 二乙烯苯(DVB)为交联剂, 过氧化苯甲酰(BPO)为引发剂, 聚乙烯醇(PVA)为稳定剂, 采用喷流式悬浮聚合法制备了磁性聚甲基丙烯酸甲酯(PMMA)微球, 并对制备的磁性微球进行了表面修饰. 采用振动样品磁强计(VSM)和扫描电子显微镜(SEM)检测了磁性微球的磁性能和形貌, 红外光谱检测了微球表面的活性功能基团. 结果表明磁性微球的比饱和磁化强度为16.8 emu/g, 表现为超顺磁性, 微球的尺寸为10 mm, 且大小比较均一.     

一步聚合法制备壳核型、可控阶层结构的羰基铁/聚苯乙烯复合微球

采用改进的悬浮聚合法合成了一系列粒径和结构可调的羰基铁粉/聚苯乙烯磁性高分子微球.利用傅立叶变换红外光谱仪、热重分析仪、X射线衍射仪、扫描电镜等分析了微球的结构、化学成分及形貌.结果表明,通过改变苯乙烯单体和聚乙烯醇(PVA)的加入量,可以制备三类不同形貌和结构的复合微球,即多孔复合微球,无孔复合微球和含"带状"突起的...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.