A new class of sulfido/oxo(dithiolene)-molybdenum(IV) complexes derived from sulfido/oxo-bis(tetrasulfido)molybdenum(IV) anions

Mono(dithiolene)sulfidomolybdenum(IV) complexes, [MoS(S4)(bdt)](2-) (2) and [MoS(S4)(bdtCl2)](2-) (3) (1,2-benzenedithiolate = bdt, 3,6-dichloro-1,2-benzenedithiolate = bdtCl2), were prepared by the substitution reaction of a tetrasulfido ligand in known [MoS(S4)2](2-) (1) with the corresponding dithiol. Complexes 2 and 3 were irreversibly oxidized to give bis(mu-sulfido) dimolybdenum(V) species, {[MoS(bdt)]2(mu-S)2}(2-) (4) and {[MoS(bdtCl2)]2(mu-S)2}(2-) (5), in aerobic acetonitrile. Mono(dithiolene)oxomolybdenum(IV) complexes, [MoO(S4)(bdt)](2-) (7) and [MoO(S4)(bdtCl2)](2-) (8), that are oxo derivatives of 2 and 3 were also synthesized from a known [MoO(S4)2](2-) (6) of an oxo derivative of 1 and the corresponding dithiol. Further, the electrophilic addition of dimethyl acetylenedicarboxylate to 7 gave [MoO(bdt)(S2C2(COOMe)2)](2-) (9), and ligand substitution of the tetrasulfido group of 7 with bdt and bdtCl2 yielded [MoO(bdt)2](2-) ( 10) and [MoO(bdt)(bdtCl2)](2-) (11), respectively. New sulfido/oxo molybdenum complexes were characterized by (1)H NMR, IR, ESI-MS, Raman, and UV-vis spectroscopies; cyclic voltammetry; and elemental analysis, and crystal structures of 2, 3, 5, 7, and 8 were determined by X-ray analysis.     

Oxygen/sulfur substitution reactions of tetraoxometalates effected by electrophilic carbon and silicon reagents

Reactions of [MO(4)](2)(-) (M = Mo, W) with certain carbon and silicon electrophiles were investigated in acetonitrile in order to produce species of potential utility in the synthesis of analogues of the sites in the xanthine oxidoreductase enzyme family. Silylation of [MoO(4)](2)(-) affords [MoO(3)(OSiPh(3))](1)(-), which with Ph(3)SiSH is converted to [MoO(2)S(OSiPh(3))](1)(-). Reaction with (Ph(3)C)(PF(6))/HS(-) yields the tetrahedral monosulfido species [MO(3)S](2)(-), previously obtained only from the aqueous system [MO(4)](2)(-)/H(2)S. Dithiolene chelate rings are readily introduced upon reaction with 1,2-C(6)H(4)(SSiMe(3))(2), leading to the square pyramidal trioxo complexes [MO(3)(bdt)](2)(-), a previously unknown dithiolene molecular type. Further ring insertion occurs upon reaction of [WO(3)(bdt)](2)(-) with 1,2-C(6)H(4)(SSiMe(3))(2), giving [WO(2)(bdt)(2)](2)(-). Related reactions occur with [ReO(4)](1)(-). Treatment with 1 equiv of (Me(3)Si)(2)S produces [ReO(3)S](1)(-); with 3 equiv of 1,2-C(6)H(4)(SSiMe(3))(2), [ReO(bdt)(2)](1)(-) is obtained with concomitant Re(VII) --> Re(V) reduction. X-ray structures are reported for [MO(3)S](z)(-) (M = Mo, W, z = 2; M = Re, z = 1), [MO(3)(bdt)](2)(-), and [WO(2)(OSiPh(3))(bdt)](1)(-), a silylation product of [WO(3)(bdt)](2)(-). [MoO(3)(bdt)](2)(-) is related to the site of inactive sulfite oxidase, and [WO(2)(OSiPh(3))(bdt)](1)(-) should closely approximate the metric features of the [(dithiolene)MoO(2)(OH)] site in inactive aldehyde/xanthine oxidoreductase. This work provides convenient syntheses of known and new derivatives of tetraoxometalates, among which is entry to a unique class of oxo-monodithiolene complexes.     

Monodithiolene molybdenum(V, VI) complexes: a structural analogue of the oxidized active site of the sulfite oxidase enzyme family

The active sites of the xanthine oxidase and sulfite oxidase enzyme families contain one pterin-dithiolene cofactor ligand bound to a molybdenum atom. Consequently, monodithiolene molybdenum complexes have been sought by exploratory synthesis for structural and reactivity studies. Reaction of [MoO(S(2)C(2)Me(2))(2)](1-) or [MoO(bdt)(2)](1-) with PhSeCl results in removal of one dithiolate ligand and formation of [MoOCl(2)(S(2)C(2)Me(2))](1-) (1) or [MoOCl(2)(bdt)](1-) (2), which undergoes ligand substitution reactions to form other monodithiolene complexes [MoO(2-AdS)(2)(S(2)C(2)Me(2))](1-) (3), [MoO(SR)(2)(bdt)](1-) (R = 2-Ad (4), 2,4,6-Pr(i)(3)C(6)H(2) (5)), and [MoOCl(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (6) (Ad = 2-adamantyl, bdt = benzene-1,2-dithiolate). These complexes have square pyramidal structures with apical oxo ligands, exhibit rhombic EPR spectra, and 3-5 are electrochemically reducible to Mo(IV)O species. Complexes 1-6 constitute the first examples of five-coordinate monodithiolene Mo(V)O complexes; 6 approaches the proposed structure of the high-pH form of sulfite oxidase. Treatment of [MoO(2)(OSiPh(3))(2)] with Li(2)(bdt) in THF affords [MoO(2)(OSiPh(3))(bdt)](1-) (8). Reaction of 8 with 2,4,6-Pr(i)(3)C(6)H(2)SH in acetonitrile gives [MoO(2)(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (9, 55%). Complexes 8 and 9 are square pyramidal with apical and basal oxo ligands. With one dithiolene and one thiolate ligand of a square pyramidal Mo(VI)O(2)S(3) coordination unit, 9 closely resembles the oxidized sites in sulfite oxidase and assimilatory nitrate reductase as deduced from crystallography (sulfite oxidase) and Mo EXAFS. The complex is the first structural analogue of the active sites in fully oxidized members of the sulfite oxidase family. This work provides a starting point for the development of both structural and reactivity analogues of members of this family.     

New oxovanadium bis(1,2-dithiolate) compounds that mimic the hydrogen-bonding interactions at the active sites of mononuclear molybdenum enzymes

Reaction of VO(acac)(2) with 1,2-dithiols in the presence of triethylamine gives pentacoordinate oxovanadium complexes [HNEt(3)](2)[VO(bdt)(2)] (1), [HNEt(3)](2)[VO(tdt)(2)] (2), and [HNEt(3)](2)[VO(bdtCl(2))(2)] (3) (where H(2)bdt = 1,2-benzenedithiol, H(2)tdt = 3,4-toluenedithiol, and H(2)bdtCl(2) = 3,6-dichloro-1,2-benzenedithiol). Compounds 1-3 have been characterized by IR, UV/visible, EPR, and mass spectroscopies. The X-ray crystal stuctures of 1 and 2 show hydrogen-bonding interactions between the terminal oxo atom and triethylammonium counterions and between ligand sulfur atoms and the counterions. These interactions are comparable with those found at the active sites of mononuclear molybdenum enzymes.     

X-ray absorption spectroscopy of a structural analogue of the oxidized active sites in the sulfite oxidase enzyme family and related molybdenum(V) complexes

X-ray absorption spectroscopy (XAS) (edge and extended X-ray absorption fine structure (EXAFS)) has been applied to the characterization of three molybdenum(V,VI) monodithiolene complexes with unidentate coligands, [MoO(SC(6)H(2)-2,4,6-Pr(i)()(3))(2)(bdt)](-) (1), [MoOCl(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](-) (2), and [MoO(2)(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](-) (3) (bdt = benzene-1,2-dithiolate). These complexes are related to the active site in the xanthine oxidase and sulfite oxidase families and, as in the enzyme sites, bind monodentate thiolate. By comparison to the data of crystalline oxidized chicken sulfite oxidase, it is shown that complex 3, whose thiolate simulates binding by the highly conserved cysteine, is an accurate structural analogue of the oxidized site of this enzyme. Normalized edge spectra, EXAFS data, Fourier transforms, and GNXAS-based fit results are presented. As in earlier studies, this provides characterization of new analogue complexes by XAS to facilitate identification of related sites in proteins.     

A density functional study of oxygen atom transfer reactions between biological oxygen atom donors and molybdenum(IV) bis(dithiolene) complexes

Density functional calculations have been used to investigate oxygen atom transfer reactions from the biological oxygen atom donors trimethylamine N-oxide (Me(3)NO) and dimethyl sulfoxide (DMSO) to the molybdenum(IV) complexes [MoO(mnt)(2)](2-) and [Mo(OCH(3))(mnt)(2)](-) (mnt = maleonitrile-1,2-dithiolate), which may serve as models for mononuclear molybdenum enzymes of the DMSO reductase family. The reaction between [MoO(mnt)(2)](2-) and trimethylamine N-oxide was found to have an activation energy of 72 kJ/mol and proceed via a transition state (TS) with distorted octahedral geometry, where the Me(3)NO is bound through the oxygen to the molybdenum atom and the N-O bond is considerably weakened. The computational modeling of the reactions between dimethyl sulfoxide (DMSO) and [MoO(mnt)(2)](2-) or [Mo(OCH(3))(mnt)(2)](-) indicated that the former is energetically unfavorable while the latter was found to be favorable. The addition of a methyl group to [MoO(mnt)(2)](2-) to form the corresponding des-oxo complex not only lowers the relative energy of the products but also lowers the activation energy. In addition, the reaction with [Mo(OCH(3))(mnt)(2)](-) proceeds via a TS with trigonal prismatic geometry instead of the distorted octahedral TS geometry modeled for the reaction between [MoO(mnt)(2)](2-) and Me(3)NO.     

Silylation, sulfidation, and benzene-1,2-dithiolate complexation reactions of oxo- and oxosulfidomolybdates(VI) and -tungstates(VI)

The synthesis and structures of two types of molecules are presented: [MVIO3 - nSn(OSiR2R')]1- (M = Mo, n = 0-3; M = W, n = 3) and [MVIO2(OSiR2R')(bdt)]1- (M = Mo, W; bdt = benzene-1,2-dithiolate). For both types, R2R' are Me3, Pri3, Ph3, Me2But and Ph2But. The complete series of oxo/sulfido/silyloxo molybdenum complexes has been prepared. Complexes with n = 0 are readily prepared by the silylation of Ag2MoO4 and sustain mono- or disulfidation with Ph3SiSH to form a species with n = 1 and n = 2, respectively. Complexes with n = 3 are accessible by the silylation of [MOS3]2-. Structures of the representative series members [MoO3(OSiPh2But)]1-, [MoO2S(OSiPh3)]1-, [MoOS2(OSiPri3)]1-, [MoS3(OSiPh2But)]1-, and also [WS3(OSiMe2But)]1-, all with tetrahedral stereochemistry, are presented. Benzene-1,2-dithiolate complexes are prepared by the reaction of [MoO3(OSiR2R')]1-with the dithiol or by the silylation of previously reported [MO3(bdt)]2-. The structures of [MoO2(OSiPh2But)(bdt)]1- and [WO2(OSiPri3)(bdt)]1- conform to square-pyramidal stereochemistry with an oxo ligand in the apical position. The role of these complexes in the preparation of site analogues of the xanthine oxidoreductase enzyme family is noted. The sulfidation reactions reported here point to the utility of Ph3SiSH and Pri3SiSH as reagents for MoVI-based oxo-for-sulfido conversions.     

Synthesis and EPR characterization of new models for the one-electron reduced molybdenum site of sulfite oxidase

Deconvoluting the different contributions of thiolate and ene-1,2-dithiolate donors to the underlying electronic structure of the Mo site in sulfite oxidase (SO) has proven to be a difficult task. One way in which these differences might be illuminated is by selectively substituting Se for S in model complexes which possess multiple sulfur donor ligand environments. Here we report the synthesis and structures of new oxo-Mo(V) complexes as effective models for the one-electron reduced active site of SO. We have used the tridentate heteroscorpionate ligand (2-dimethylethanethiol)bis(3,5-dimethylpyrazolyl)methane (L3SH) in order to model the constrained cysteinyl sulfur (S(Cys)) ligand environment observed in the crystal structure of the enzyme, and benzene-1,2-dithiol (bdt) as a mimic of the ene-1,2-dithiolate chelate. [(L3S)MoO(bdt)] and [(L3S)MoO(SPh)(2)] have been structurally characterized by X-ray crystallography, and as such, [(L3S)MoO(bdt)] is only the second known model compound that closely approximates the active site structure of reduced forms of SO. Additionally, benzenethiol (SPh) and benzeneselenol (SePh) have been used to perturb the equatorial ligand environment of [(L3S)MoO(bdt)].) This has provided much needed insight into the electronic structure of the one-electron reduced SO site and has allowed for increased understanding of the individual roles played by these different thiolate donors in the oxidative half-reaction of the enzyme. Interestingly, the EPR spectra of [(L3S)MoO(bdt)], [(L3S)MoO(SPh)(2)], and [(L3S)MoO(SePh)(2)] closely resemble that of both high pH (hpH) and low pH (lpH) SO, except for the fact that the magnitude of g(1) is found to be consistently higher in the model spectra compared to that of the enzyme. It is suggested that this derives from an increase in Mo-S covalency in the models relative to hpH and lpH SO.     

Trinuclear Mo3S7 clusters coordinated to dithiolate or diselenolate ligands and their use in the preparation of magnetic single component molecular conductors

A general route for the preparation of a series of dianionic Mo3S7 cluster complexes bearing dithiolate or diselenolate ligands, namely, [Mo3S7L3](2-) (where L = tfd (bis(trifluoromethyl)-1,2-dithiolate) (4(2-)), bdt (1,2-benzenedithiolate) (5(2-)), dmid (1,3-dithia-2-one-4,5-dithiolate) (6(2-)), and dsit (1,3-dithia-2-thione-4,5-diselenolate) (7(2-))) is reported by direct reaction of [Mo3S7Br6](2-) and (n-Bu)2Sn(dithiolate). The redox properties, molecular structure, and electronic structure (BP86/VTZP) of the 4(2-) to 7(2-) clusters have also been investigated. The HOMO orbital in all complexes is delocalized over the ligand and the Mo3S7 cluster core. Ligand contributions to the HOMO range from 61.67% for 4(2-) to 82.07% for 7(2-), which would allow fine-tuning of the electronic and magnetic properties. These dianionic clusters present small energy gaps between the HOMO and HOMO-1 orbitals (0.277-0.104 eV). Complexes 6(2-) and 7(2-) are oxidized to the neutral state to afford microcrystalline or amorphous fine powders that exhibit semiconducting behavior and present antiferromagnetic exchange interactions. These compounds are new examples of the still rare single-component conductors based on cluster magnetic units.     

Synthesis, characterization, and crystal structure of the Pd(phen)(bdt) complex. A DFT and TDDFT study of its ground electronic and excited states compared to those of analogous complexes

The synthesis and characterization of Pd(phen)(bdt) (1) (phen = 1,10-phenanthroline, bdt = 1,2-benzenedithiolate) is presented. 1 crystallizes in the monoclinic space group P2(1)/c, alpha = 11.281(4) A, b = 20.498(8) A, c = 8.374(3) A, beta = 90.234(8), V = 1936.5(13) A(3), Z = 4, and is isostructural with its previously reported related complexes. The ground and low lying excited electronic states in 1 and in the related complexes Pd(bpy)(bdt) (2), Pt(bpy)(bdt) (3), Pt(bpy)(mnt) (4), and Pt(bpy)(edt) (5) [where bpy = 2,2'-bipyridine, edt = ethylene-1,2-dithiolate, and mnt = maleonitriledithiolate] are studied using density functional theory techniques. The electronic properties of 1-5 are studied using the B3LYP functional. Optimized geometries are compared to experimentally observed structures. Time dependent density functional theory (TDDFT) is employed to investigate the excited singlet and triplet states. The calculated energies of the lowest singlet state and the lowest triplet state in all five complexes are in considerable agreement with experimental data. It is shown that variation of both metal and dithiolate-ligand going from 1 and 2 to 3, 4, and 5 has a substantial impact on the spectroscopic and excited-state properties, indicating at the same time the mixed metal/dithiolate character of the HOMO orbital. All the low-lying transitions are categorized as MMLL'CT transitions. The emissive state of all complexes is assigned as a triplet dithiolate/metal to diimine charge transfer with differences in the structures of the emissions resulting from differences in the pi dithiolate orbital of the mnt, bdt, and edt as well as from differences in metal.     

Tuning of the spin distribution between ligand- and metal-based spin: electron paramagnetic resonance of mixed-ligand molybdenum tris(dithiolene) complex anions

Electron paramagnetic resonance spectra of homoleptic and mixed-ligand molybdenum tris(dithiolene) complex anions [Mo(tfd)(m)(bdt)(n)](-) (n + m = 3; bdt = S(2)C(6)H(4); tfd = S(2)C(2)(CF(3))(2)) reveal that the spin density has mixed metal-ligand character with more ligand-based spin for [Mo(tfd)(3)](-) and a higher degree of metal-based spin for [Mo(bdt)(3)](-): the magnitude of the isotropic (95,97)Mo hyperfine interaction increases continuously, by a factor of 2.5, on going from the former to the latter. The mixed complexes fall in between, and the metal character of the spin increases with the bdt content. The experiments were corroborated by density functional theory computations, which reproduce this steady increase in metal-based character.     

Electronic spectral studies of molybdenyl complexes. 2. MCD spectroscopy of [MoOS4]- centers

Magnetic circular dichroism (MCD) and absorption spectroscopies have been used to probe the electronic structure of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] complexes (edt = ethane-1,2-dithiolate). The results of density functional calculations (DFT) on [MoO(SMe)4]- and [MoO(edt)2]- model complexes were used to provide a framework for the interpretation of the spectra. Our analysis shows that the lowest energy transitions in [MoVOS4] chromophores (S4 = sulfur donor ligand) result from S-->Mo charge transfer transitions from S valence orbitals that lie close to the ligand field manifold. The energies of these transitions are strongly dependent on the orientation of the S lone-pair orbitals with respect to the Mo atom that is determined by the geometry of the ligand backbone. Thus, the lowest energy transition in the MCD spectrum of [PPh4][MoO(p-SC6H4X)4] (X = H) occurs at 14,800 cm-1, while that in [PPh4][MoO(edt)2] occurs at 11,900 cm-1. The identification of three bands in the absorption spectrum of [PPh4][MoO(edt)2] arising from LMCT from S pseudo-sigma combinations to the singly occupied Mo 4d orbital in the xy plane suggests that there is considerable covalency in the ground-state electronic structures of [MoOS4] complexes. DFT calculations on [MoO(SMe)4]- reveal that the singly occupied HOMO is 53% Mo 4dxy and 35% S p for the equilibrium C4 geometry. For [MoO(edt)2]- the steric constraints imposed by the edt ligands result in the S pi orbitals being of similar energy to the Mo 4d manifold. Significant S pseudo-sigma and pi donation may also weaken the Mo identical to O bond in [MoOS4] centers, a requirement for facile active site regeneration in the catalytic cycle of the DMSO reductases. The strong dependence of the energies of the bands in the absorption and MCD spectra of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] on the ligand geometry suggests that the structural features of the active sites of the DMSO reductases may result in an electronic structure that is optimized for facile oxygen atom transfer.     

Dioxo-molybdenum(VI) and mono-oxo-molybdenum(IV) complexes supported by new aliphatic dithiolene ligands: new models with weakened Mo=O bond characters for the arsenite oxidase active site

The cis-dioxo-molybdenum(VI) complexes, [MoO2(L(H))2]2- (1b), [MoO2(L(S))(2)]2- (2b), and [MoO2(L(O))2]2- (3b) (L(H) = cyclohexene-1,2-dithiolate, L(S) = 2,3-dihydro-2H-thiopyran-4,5-dithiolate, and L(O) = 2,3-dihydro-2H-pyran-4,5-dithiolate), with new aliphatic dithiolene ligands were prepared and investigated by infrared (IR) and UV-vis spectroscopic and electrochemical methods. The mono-oxo-molybdenum(IV) complexes, [MoO(L(H))2]2- (1a), [MoO(L(S))2]2- (2a), and [MoO(L(O))2]2- (3a), were further characterized by X-ray crystal structural determinations. The IR and resonance Raman spectroscopic studies suggested that these cis-dioxo molybdenum(VI) complexes (1b-3b) had weaker Mo=O bonds than the common Mo(VI)O2 complexes. Complexes 1b-3b also exhibited strong absorption bands in the visible regions assigned as charge-transfer bands from the dithiolene ligands to the cis-MoO2 cores. Because the oxygen atoms of the cis-Mo(VI)O2 cores are relatively nucleophilic, these complexes were unstable in protic solvents and protonation might occur to produce Mo(VI)O(OH), as observed with the oxidized state of arsenite oxidase.     

Ligand displacement and oxidation reactions of methyl(oxo)rhenium(V) complexes

Compounds that contain the anion [MeReO(edt)(SPh)](-) (3-) were synthesized with the countercations 2-picolinium (PicH+3-) and 2,6-lutidinium (LutH+3-), where edt is 1,2-ethanedithiolate. Both PicH+3- and MeReO(edt)(tetramethylthiourea) (4) were crystallographically characterized. The rhenium atom in each of these compounds exists in a five-coordinate distorted square pyramid. In the solid state, PicH+3- contains an anion with a short (d(SH) = 232 pm) and nearly linear hydrogen-bonded (N-H.S) interaction to the cation. Ligand substitution reactions were studied in chloroform. Displacement of PhSH by PPh(3) follows second-order kinetics, d[MeReO(edt)(PPh(3))]/dt = k[PicH+3-][PPh3], whereas with pyridines an unusual form was found, d[MeReO(edt)(Py)]/dt = k[PyH+3-][Py](2), in which the conversion of PicH+3- to PyH+3- has been incorporated. Further, added Py accelerates the formation of [MeReO(edt)(PPh3)], v = k.[PicH+3-].[PPh3].[Py]. Compound 4, on the other hand, reacts with both PPh(3) and pyridines, L, at a rate given by d[MeReO(edt)(L)]/dt = k.[4].[L]. When PicH+3- reacts with pyridine N-oxides, a three-stage reaction was observed, consistent with ligand replacement of SPh(-) by PyO, N-O bond cleavage of the PyO assisted by another PyO, and eventual decomposition of MeRe(O)(edt)(OPy) to MeReO(3). Each of first two steps showed a large substituent effect; Hammett analysis gave rho(1) = -5.3 and rho(2) = -4.3.     

High-nuclearity sulfide-rich molybdenum[bond]iron[bond]sulfur clusters: reevaluation and extension

High-nuclearity Mo[bond]Fe[bond]S clusters are of interest as potential synthetic precursors to the MoFe(7)S(9) cofactor cluster of nitrogenase. In this context, the synthesis and properties of previously reported but sparsely described trinuclear [(edt)(2)M(2)FeS(6)](3-) (M = Mo (2), W (3)) and hexanuclear [(edt)(2)Mo(2)Fe(4)S(9)](4-) (4, edt = ethane-1,2-dithiolate; Zhang, Z.; et al. Kexue Tongbao 1987, 32, 1405) have been reexamined and extended. More accurate structures of 2-4 that confirm earlier findings have been determined. Detailed preparations (not previously available) are given for 2 and 3, whose structures exhibit the C(2) arrangement [[(edt)M(S)(mu(2)-S)(2)](2)Fe(III)](3-) with square pyramidal Mo(V) and tetrahedral Fe(III). Oxidation states follow from (57)Fe M?ssbauer parameters and an S = (3)/(2) ground state from the EPR spectrum. The assembly system 2/3FeCl(3)/3Li(2)S/nNaSEt in methanol/acetonitrile (n = 4) affords (R(4)N)(4)[4] (R = Et, Bu; 70-80%). The structure of 4 contains the [Mo(2)Fe(4)(mu(2)-S)(6)(mu(3)-S)(2)(mu(4)-S)](0) core, with the same bridging pattern as the [Fe(6)S(9)](2-) core of [Fe(6)S(9)(SR)(2)](4-) (1), in overall C(2v) symmetry. Cluster 4 supports a reversible three-member electron transfer series 4-/3-/2- with E(1/2) = -0.76 and -0.30 V in Me(2)SO. Oxidation of (Et(4)N)(4)[4] in DMF with 1 equiv of tropylium ion gives [(edt)(2)Mo(2)Fe(4)S(9)](3-) (5) isolated as (Et(4)N)(3)[5].2DMF (75%). Alternatively, the assembly system (n = 3) gives the oxidized cluster directly as (Bu(4)N)(3)[5] (53%). Treatment of 5 with 1 equiv of [Cp(2)Fe](1+) in DMF did not result in one-electron oxidation but instead produced heptanuclear [(edt)(2)Mo(2)Fe(5)S(11)](3-) (6), isolated as the Bu(4)N(+)salt (38%). Cluster 6 features the previously unknown core Mo(2)Fe(5)(mu(2)-S)(7)(mu(3)-S)(4) in molecular C(2) symmetry. In 4-6, the (edt)MoS(3) sites are distorted trigonal bipramidal and the FeS(4) sites are distorted tetrahedral with all sulfide ligands bridging. M?ssbauer spectroscopic data for 2 and 4-6 are reported; (mean) iron oxidation states increase in the order 4 < 5 approximately 1 < 6 approximately 2. Redox and spectroscopic data attributed earlier to clusters 2 and 4 are largely in disagreement with those determined in this work. The only iron and molybdenum[bond]iron clusters with the same sulfide content as the iron[bond]molybdenum cofactor of nitrogenase are [Fe(6)S(9)(SR)(2)](4-) and [(edt)(2)Mo(2)Fe(4)S(9)](3-)(,4-).     

Discrimination of mononuclear and dinuclear dinitrosyl iron complexes (DNICs) by S K-edge X-ray absorption spectroscopy: insight into the electronic structure and reactivity of DNICs

In addition to probing the formation of dinitrosyl iron complexes (DNICs) by the characteristic Fe K-edge pre-edge absorption energy ranging from 7113.4 to 7113.8 eV, the distinct S K-edge pre-edge absorption energy and pattern can serve as an efficient tool to unambiguously characterize and discriminate mononuclear DNICs and dinuclear DNICs containing bridged-thiolate and bridged-sulfide ligands. The higher Fe-S bond covalency modulated by the stronger electron-donating thiolates promotes the Fe → NO π-electron back-donation to strengthen the Fe-NO bond and weaken the NO-release ability of the mononuclear DNICs, which is supported by the Raman ν(Fe-NO) stretching frequency. The Fe-S bond covalency of DNICs further rationalizes the binding preference of the {Fe(NO)(2)} motif toward thiolates following the trend of [SEt](-) > [SPh](-) > [SC(7)H(4)SN](-). The relative d-manifold energy derived from S K-edge XAS as well as the Fe K-edge pre-edge energy reveals that the electronic structure of the {Fe(NO)(2)}(9) core of the mononuclear DNICs [(NO)(2)Fe(SR)(2)](-) is best described as {Fe(III)(NO(-))(2)}(9) compared to [{Fe(III)(NO(-))(2)}(9)-{Fe(III)(NO(-))(2)}(9)] for the dinuclear DNICs [Fe(2)(μ-SEt)(μ-S)(NO)(4)](-) and [Fe(2)(μ-S)(2)(NO)(4)](2-).     

Metal-dependent and redox-selective coordination behaviors of metalloligand [MoV(1,2-benzenedithiolato)3]- with CuI/AgI ions

The synthesis and characterization of two coordination polymers, {Cu(I)[Mo(V)(bdt)(3)]·0.5Et(2)O}(n) (1·0.5Et(2)O, bdt: o-benzenedithiolato) and {Ag(I)[Mo(V)(bdt)(3)]}(n) (2), composed of redox-active [Mo(V)(bdt)(3)](-) metalloligand with Cu(I) and Ag(I) ions are reported. The complexation reactions of [Mo(V)(bdt)(3)](-) with Cu(II)(ClO(4))(2) or Ag(I)ClO(4) commonly lead to the formation of one-dimensional (1-D) coordination polymers. The presence of Cu(I) in 1·0.5Et(2)O strongly indicates that the Cu(II) ion is reduced during the complexation reaction with [Mo(V)(bdt)(3)](-), which acts as an electron donor. The total dimensionalities of the assembled structures of 1·0.5Et(2)O and 2 are significantly different and related to the type of additional metal ions, Cu(I) and Ag(I). In contrast to the isolated 1-D chain structure of 1·0.5Et(2)O, complex 2 has a three-dimensional (3-D) assembled structure constructed from additional π-π stacking interactions between adjacent [Mo(V)(bdt)(3)](-) moieties. These structural differences influence the solubility of the complexes in organic solvents; complex 1·0.5Et(2)O is soluble as origomeric species in highly polar solvents, while 2 is insoluble in organic solvents and water. Coordination polymers 1·0.5Et(2)O and 2 were investigated by UV-vis spectroscopy in the solid state, and that in solution together with their electrochemical properties were also investigated for 1 because of its higher solubility in polar organic solvents. Complex 1·0.5Et(2)O dissolved in CH(3)CN demonstrates concentration-dependent UV-vis spectra supporting the presence of coordinative interactions between [Mo(V)(bdt)(3)](-) moieties and Cu(I) ions to create the origomeric species even in solutions, an observation that is supported also by electrochemical experiments.     

Active-site models for the nickel-iron hydrogenases: effects of ligands on reactivity and catalytic properties

Described are new derivatives of the type [HNiFe(SR)(2)(diphosphine)(CO)(3)](+), which feature a Ni(diphosphine) group linked to a Fe(CO)(3) group by two bridging thiolate ligands. Previous work had described [HNiFe(pdt)(dppe)(CO)(3)](+) ([1H](+)) and its activity as a catalyst for the reduction of protons (J. Am. Chem. Soc. 2010, 132, 14877). Work described in this paper focuses on the effects on properties of NiFe model complexes of the diphosphine attached to nickel as well as the dithiolate bridge, 1,3-propanedithiolate (pdt) vs 1,2-ethanedithiolate (edt). A new synthetic route to these Ni-Fe dithiolates is described, involving reaction of Ni(SR)(2)(diphosphine) with FeI(2)(CO)(4) followed by in situ reduction with cobaltocene. Evidence is presented that this route proceeds via a metastable μ-iodo derivative. Attempted isolation of such species led to the crystallization of NiFe(Me(2)pdt)(dppe)I(2), which features tetrahedral Fe(II) and square planar Ni(II) centers (H(2)Me(2)pdt = 2,2-dimethylpropanedithiol). The new tricarbonyls prepared in this work are NiFe(pdt)(dcpe)(CO)(3) (2, dcpe = 1,2-bis(dicyclohexylphosphino)ethane), NiFe(edt)(dppe)(CO)(3) (3), and NiFe(edt)(dcpe)(CO)(3) (4). Attempted preparation of a phenylthiolate-bridged complex via the FeI(2)(CO)(4) + Ni(SPh)(2)(dppe) route gave the tetrametallic species [(CO)(2)Fe(SPh)(2)Ni(CO)](2)(μ-dppe)(2). Crystallographic analysis of the edt-dcpe compund [2H]BF(4) and the edt-dppe compound [3H]BF(4) verified their close resemblance. Each features pseudo-octahedral Fe and square pyramidal Ni centers. Starting from [3H]BF(4) we prepared the PPh(3) derivative [HNiFe(edt)(dppe)(PPh(3))(CO)(2)]BF(4) ([5H]BF(4)), which was obtained as a ～2:1 mixture of unsymmetrical and symmetrical isomers. Acid-base measurements indicate that changing from Ni(dppe) (dppe = Ph(2)PCH(2)CH(2)PPh(2)) to Ni(dcpe) decreases the acidity of the cationic hydride complexes by 2.5 pK(a)(PhCN) units, from ～11 to ～13.5 (previous work showed that substitution at Fe leads to more dramatic effects). The redox potentials are more strongly affected by the change from dppe to dcpe, for example the [2](0/+) couple occurs at E(1/2) = -820 for [2](0/+) vs -574 mV (vs Fc(+/0)) for [1](0/+). Changes in the dithiolate do not affect the acidity or the reduction potentials of the hydrides. The acid-independent rate of reduction of CH(2)ClCO(2)H by [2H](+) is about 50 s(-1) (25 °C), twice that of [1H](+). The edt-dppe complex [2H](+) proved to be the most active catalyst, with an acid-independent rate of 300 s(-1).     

Syntheses, characterization, and luminescence of Pt II-M I (M = Cu, Ag, Au) heterometallic complexes by incorporating Pt(diimine)(dithiolate) with [M2(dppm)2]2+ (dppm = Bis(diphenylphosphino)methane)

Reaction of Pt(diimine)(edt) (edt = 1,2-ethanedithiolate) with M(2)(dppm)(2)(MeCN)(2)(2+) (dppm = bis(diphenylphosphino)methane) gave heterotrinuclear complexes [PtCu(2)(edt)(mu-SH)(dppm)(3)](ClO(4)) (11) and [PtCu(2)(diimine)(2)(edt)(dppm)(2)](ClO(4))(2) (diimine = 2,2'-bpyridine (bpy), 12; 4,4'-dibutyl-2,2'-bipyridine (dbbpy), 13; phenanthroline (phen), 14; 5-bromophenanthroline (brphen), 15) when M = Cu(I). The reaction, however, afforded tetra- and trinuclear complexes [Pt(2)Ag(2)(edt)(2)(dppm)(2)](SbF(6))(2) (17) and [PtAu(2)(edt)(dppm)(2)](SbF(6))(2) (21) when M = Ag(I) and Au(I), respectively. The complexes were characterized by elemental analyses, electrospray mass spectroscopy, (1)H and (31)P NMR, IR, and UV-vis spectrometry, and X-ray crystallography for 14, 17, and 18. The Pt(II)Cu(I)(2) heterotrinuclear complexes 11-15 exhibit photoluminescence in the solid states at 298 K and in the frozen acetonitrile glasses at 77 K. It is likely that the emission originates from a ligand-to-metal charge transfer (dithiolate-to-Pt) (3)[p(S) --> d(Pt)] transition for 11 and from an admixture of (3)[d(Cu)/p(S)-pi(diimine)] transitions for 12-16. The Pt(II)(2)Ag(I)(2) heterotetranuclear complexes 17 and 18 are nonemissive in the solid states and in solutions at 298 K but show photoluminescence at 77 K. The Pt(II)Au(I)(2) heterotrinuclear complexes 19-21, however, are luminescent at room temperature in the solid state and in solution. Compounds 19 and 20 afford negative solvatochromism associated with a charge transfer from an orbital of a mixed metal/dithiolate character to a diimine pi orbital.     

Coordination complexes of molybdenum with 3,6-di-tert-butylcatechol. Addition products of DMSO, pyridine N-oxide, and triphenylarsine oxide to the putative [MoVIO(3,6-DBCat)2] monomer and self-assembly of the chiral [(MoVIO(3,6-DBCat)2)4] square

Molybdenum complexes of 3,6-di-tert-butylcatechol have been prepared from the reaction between [Mo(CO)(6)] and 3,6-di-tert-butyl-1,2-benzoquinone. A putative "[MoO(3,6-DBCat)(2)]" monomer is assumed to form initially by reaction with trace quantities of oxygen. Condensation of the reaction mixture leads to the formation of oligomeric products, including the [(MoO(3,6-DBCat)(2))(4)] chiral square isolated by chromatographic separation. Molybdenum centers at the corner of the square are bridged by oxo ligands centered along edges. Four-fold and inversion crystallographic symmetry gives tetramers as either LambdaLambdaLambdaLambda or DeltaDeltaDeltaDelta isomers, and the crystal structure consists of parallel columns of squares with the same chirality. Addition of O-Subst (O-Subst = dmso, pyridine N-oxide, triphenylarsine oxide) ligands to [MoO(3,6-DBCat)(2)] occurs selectively to give cis-[MoO(O-Subst)(3,6-DBCat)(2)] products. All three addition complexes are fluxional in solution. The temperature-dependent stereodymanic behavior of [MoO(dmso)(3,6-DBCat)(2)] has been shown to occur via a trigonal prismatic intermediate (Bailar twist) that conserves the cis disposition of oxo and dmso ligands. Electrochemical and chemical reduction reactions have been investigated for [MoO(dmso)(3,6-DBCat)(2)] with interest in displacement of SMe(2) with formation of cis-[MoO(2)(3,6-DBCat)(2)](2-). Cyclic voltammetry shows an irreversible two-electron reduction for the complex at -0.852 V (vs Fc/Fc(+)). Chemical reduction using CoCp(2) was observed to give a product with an electronic spectrum that is generally associated with cis-[MoO(2)(Cat)(2)](2-) complexes. Structural characterization revealed that the product was [CoCp(2)][MoO(3,6-DBCat)(2)], possibly formed as the product of dmso displacement upon one-electron reduction of [MoO(dmso)(3,6-DBCat)(2)].