3-Bromo-propenyl acetate in organic synthesis: an expeditious route to 3-alkyl-4-acetoxy-5-iodomethyl isoxazolidines

N-Trimethylsilyloxy-N-benzyl-1-alkyl-2-acetoxy-3-buten-1-amines 13, obtained in good yields and moderate diastereoselectivities by TMSOTf promoted α-acetoxyallylation of nitrones using metallic zinc and 3-bromo-propenyl acetate 11, are exploited in a stereospecific 5-exo-trig iodocyclization reaction to afford 4,5-cis-3-alkyl-4-acetoxy-5-iodomethyl isoxazolidines 14, promising starting materials for the synthesis of pyrrolidine azasugars.     

聚合物支持的三苯基氯硅烷在昆虫性信息素固相合成中的应用

1%二乙烯基苯交联的聚苯乙烯树脂在N,N,N',N'-四甲基乙二胺的存在下用丁基锂进行锂化后与二苯基二氯硅烷反应制得聚苯乙烯支持的三苯基氯硅烷(2).这种聚合物用于一些鳞翅目(lepidoptera)昆虫的性信息素的固相合成.2与1,9-壬二醇,1,10-癸二醇和1,12-十二碳二醇反应分别生成聚合物支持的二醇单硅醚(4a,4b,4c),游离的醇基用Swern试剂(DMSO和草酸酰氯)氧化成聚合物支持的醛(5a,5b,5c),经Wittig缩合反应和用氟离子裂解后分别得到9-十四碳烯醇-1(8a),10-十四碳烯醇-1(8b)和12-十四碳烯醇-1(8c).化合物8经乙酰化后分别得到9-十四碳烯醇-1乙酸酯(9a),其顺式异构体是秋灰夜蛾(S.frugiperda,Smith)的性信息素;10-十四碳烯醇-1乙酸酯(9b),其顺式异构体是橡卷叶蛾(A.semiferamus,Walker)的性信息素;和12-十四碳烯醇-1乙酸酯(9C).9C与四氯化碲反应,硫化钠还原后转化成E-和Z-异构体比例为54:46的亚洲玉米螟(Ostriniafurnicalis)的性信息素.     

Synthesis and photochromism of polymer-bound phenoxyquinone derivatives

Acrylate- and styrene-derived polymers having pendant phenoxyquinones for photochromism were prepared by 2,2′-azoisobutyronitrile (AIBN)-initiated radical polymerization. Synthesis of the monomers were straightforward and the polymers were obtained in high yields in spite of the quinone moieties presented in the monomers, which usually can function as radical scavengers and/or catalysts poison. Photo-induced rearrangement from the “trans”-quinone forms to the “ana”-quinone forms readily occurred when the polymer films were irradiated with UV light.     

Rapid parallel synthesis of polymer-bound enones utilizing microwave-assisted solid-phase chemistry

A microwave-assisted parallel solid-phase synthesis of a collection of 21 polymer-bound enones has been developed. The two-step protocol involves initial high-speed acetoacetylation of polystyrene Wang resin with a selection of seven common beta-ketoesters. When microwave flash heating at 170 degreesC was employed, complete conversions were achieved within 1-10 min, a significant improvement over the conventional thermal method, which takes several hours for completion. Significant rate enhancements were also observed for the subsequent microwave-heated Knoevenagel condensations with a second set of 13 different aldehydes. Reaction times were reduced to 30-60 min at 125 degreesC in the microwave protocol compared to 1-2 days using conventional thermal conditions. Kinetic comparison studies indicate that the observed rate enhancements can be attributed to the rapid direct heating of the solvent (1,2-dichlorobenzene) by microwaves rather than to any specific microwave effect. All reactions have been carried out in commercially available parallel reactors with on-line temperature measurement, designed specifically for use in multimode microwave cavities.     

Indium-mediated 1,2,4,5-hexatetraen-3-ylation of 4-acetoxy-2-azetidinones and their applications to the Diels-Alder reactions for the synthesis of 2-azetidinone derivatives

4-Acetoxy-2-azetidinones reacted with organoindium reagent generated in situ from indium and 1,6-dibromo-2,4-hexadiyne in the presence of LiCl in DMF to selectively produce 2-azetidinones possessing 1,2,4,5-hexatetraen-3-yl group on the C4-position. The Diels-Alder reactions of 4-(1,2,4,5-hexatetraen-3-yl)-2-azetidinones with a variety of dienophiles and subsequent aromatizations afforded valuable functional group-substituted 2-azetidinones in good yields.     

Tellurium in organic synthesis: X. Synthesis of 3-halogenobenzo [b] tellurophene derivatives

Several substituted 3-halogenobenzo[b] tellurophenes have been synthesized by treating phenylacetylenes with TeO₂ in acetic acid in the presence of a lithium halide. A mechanism is postulated involving an electrophilic attack by a solubilized tellurium species on the acetylenic bond with introduction of a halogen atom followed by cyclization to the benzo[b]tellurophene system. The benzo[b]tellurophenes can be easily chlorinated with Cl₂ gas to yield benzo[b]tellurophene 1,1-dichloride derivatives, but attempted lithiation is the 3-position was unsuccessful and resulted in a ring rupture. When refluxed in trifluoroacetic acid 3-chlorobenzo[b]tellurophene was converted into 3-oxo-2,3-dihydrobenzo[b]tellurophene.     

Efficient solid-phase synthesis of isocytosine derivatives

We have investigated the potential use of a solid-phase synthesis of novel 6-(arylmethyl)-5-methyl-isocytosine derivatives based on the immobilization of the corresponding 2-thiothymine on a Merrifield resin, oxidation of the immobilized form to the sulfone, and aminolysis of the latter under mild conditions.     

Microwave-assisted solution- and solid-phase synthesis of 2-amino-4-arylpyrimidine derivatives

An efficient and rapid microwave-assisted solution-phase method for the synthesis of 2-amino-4-arylpyrimidine-5-carboxylic acid derivatives has been developed. The five-step linear protocol involves an initial Biginelli multicomponent reaction leading to dihydropyrimidine-2-thiones which are subsequently S-alkylated with methyl iodide. The resulting 2-methylthiodihydropyrimidines are sequentially oxidized first with manganese dioxide and then with Oxone to provide 2-methylsulfonyl-pyrimidines which serve as excellent precursors for the generation of a variety of 2-substituted pyrimidines via displacement of the reactive sulfonyl group with nitrogen, oxygen, sulfur, and carbon nucleophiles. A modified protocol using a solid-phase method has also been developed.     

Microwave-assisted solid-phase synthesis of hydantoin derivatives

A microwave-assisted synthesis of 3,5- and 1,3,5-substituted hydantoins starting from various resins for solid-phase combinatorial chemistry has been developed. The hydantoins were synthesized from pre-loaded resins with amino acids via treatment with isocyanate or phenylisocyanate and subsequent intramolecular cyclization. Both reactions were performed under microwave irradiation. We studied the cyclative cleavage leading to hydantoin compounds dependent on the nature of the amino acid and the nucleofuge properties of the resin.     

Metabolically stabilized derivatives of phosphatidylinositol 4-phosphate: synthesis and applications

Phosphatidylinositol 4-phosphate (PtdIns(4)P) lipid is an essential component of eukaryotic membranes and a marker of the Golgi complex. Here, we developed metabolically stabilized (ms) analogs of PtdIns(4)P and the inositol 1,4-bisphosphate (IP(2)) head group derivative and demonstrated that these compounds can substitute the natural lipid fully retaining its physiological activities. The methylenephosphonate (MP) and phosphorothioate (PT) analogs of PtdIns(4)P and the aminohexyl (AH)-IP(2) probe are recognized by the PtdIns(4)P-specific PH domain of four phosphate adaptor protein 1 (FAPP1). Binding of FAPP1 to the PtdIns(4)P derivatives stimulates insertion of the PH domain into the lipid layers and induces tubulation of membranes. Both ms analogs and IP(2) probes could be invaluable for identifying protein effectors and characterizing PtdIns(4)P-dependent signaling cascades within the trans-Golgi network (TGN).     

Combinatorial synthesis of heterocycles: solid-phase synthesis of 2-amino-4(1H)-quinazolinone derivatives

A new solid-phase synthesis of various substituted 2-amino-4(1H)-quinazolinones from a resin bound amine component is described. The amine was readily converted to the corresponding polymer bound S-methylthiopseudourea. Condensation with different substituted isatoic anhydrides afforded 2-amino-4(1H)-quinazolinone derivatives. The method is amenable for combinatorial library generation.     

Membrane receptor probes: solid-phase synthesis of biotin-Asp-PEG-arvanil derivatives

[structure: see text] A modular, flexible solid-phase synthetic route for the preparation of biotinylated cross-linking probes of membrane receptors is described. The route utilizes an orthogonal protection strategy employing a Pd[0] cleavable allyl linker attached to the probe via an aspartate residue. The versatility of the method is illustrated through the synthesis of a number of arvanil-derived cannabinoid receptor ligands displaying either a photoaffinity or a chemical cross-linking group.     

Colorimetric tools for solid-phase organic synthesis

One of the unresolved problems of solid-phase organic synthesis (SPOS) is the availability of general and rapid methods to monitor the transformation of functional groups present in molecules supported on insoluble supports. Color tests, far from providing the ultimate solution, may help in detection (and sometimes in quantification) of different functional groups. In this short review, we have collected most of the methods available and applied in SPOS with an Experimental Section that describes the procedure we have successfully applied to bead analyses in our laboratories.     

Microwave-assisted solid-phase synthesis of 5-carboxamido-N-acetyltryptamine derivatives

[reaction: see text] The synthesis of the indole skeleton of new melatoninergic analogues was realized using solid-phase methodology in association with microwave irradiation. This combination speeds up the solid-phase drug discovery process in rigorously established conditions.     

Efficient solid-phase synthesis of symmetric norbinaltorphimine derivatives

[reaction: see text] We describe an efficient solid-phase synthesis of symmetric norbinaltorphimine (norBNI) derivatives 2. Pyrrole formation involving the homocoupling of two solid-supported ketones 6, followed by chemoselective and sequential N-alkylation, provided N-substituted norBNI derivatives 2. Use of this methodology led to the combinatorial synthesis of 120 norBNI derivatives.     

Vinyl sulfones in solid-phase synthesis: preparation of 4,5,6,7-tetrahydroisoindole derivatives

The preparation of functionalized 4,5,6,7-tetrahydroisoindole via a traceless solid-phase sulfone linker strategy is described. Thermolytic extrusion of SO(2) from polymer-bound 3-(phenylsulfonyl)-3-sulfolene (7) generated polymer-bound 2-(phenylsulfonyl)-1,3-butadiene (9) in situ which underwent Diels--Alder cycloaddition with various dienophiles to furnish vinyl sulfone resins 10-14. To complete a traceless linker cleavage strategy, (p-tolysulfonyl)methyl isocyanide or ethyl isocyanoacetate was employed to react with the vinyl sulfone moiety to liberate functionalized 4,5,6,7-tetrahydroisoindole products from the resin. Using this chemistry, nine tetrahydroisoindole derivatives (6, 15-22) were prepared in 32-41% overall yields from polystyrene/divinylbenzene sulfinate 1.     

gem-Dinitro compounds in organic synthesis. 2. Synthesis of 4-nitropyrazoles from dinitromethane and its derivatives

A series of 4-nitropyrazoles was synthesized from dinitromethane and other gemdinitro derivatives. New cyclization reactions of aliphatic azines with dinitro-methane and an intramolecular cyclization of dinitroacetazines have been discovered, with which 4-nitropyrazoles substituted at the 3- and 5-positions of the pyrazole ring can be obtained in one stage.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2825–2828, December, 1991.