Physical properties of ZnO thin films deposited by spray pyrolysis technique

Thin films of ZnO have been prepared on glass substrates at different thicknesses by spray pyrolysis technique using 0.2 M aqueous solution of zinc acetate. X-ray diffraction reveals that the films are polycrystalline in nature having hexagonal wurtzite type crystal structure. The resistivity at room temperature is of the order 10⁻² Ω cm and decreased as the temperature increased. Films are highly transparent in the visible region. The dependence of the refractive index, n, and extinction coefficient, k, on the wavelength for a sprayed film is also reported. Optical bandgap, E_g, has been reported for the films. A shift from E_g = 3.21 eV to 3.31 eV has been observed for deposited films.     

Properties of NiO thin films deposited by intermittent spray pyrolysis process

NiO thin films have been grown on glass substrates by intermittent spray pyrolysis deposition of NiCl₂·6H₂O diluted in distilled water, using a simple “perfume atomizer”. The effect of the solution molarity on their properties was studied and compared to those of NiO thin films deposited with a classical spray system. It is shown that NiO thin films crystallized in the NiO structure are achieved after deposition. Whatever the precursor molarity, the grain size is around 25-30 nm. The crystallites are preferentially oriented along the (1 1 1) direction. All the films are p-type. However, the thickness and the conductivity of the NiO films depend on the precursor contraction. By comparison with the properties of films deposited by classical spray technique, it is shown that the critical precursor concentration, which induces strong thin films properties perturbations, is higher when a perfume atomizer is used. This broader stability domain can be attributed to better chlorides decomposition during the rest time used in the perfume atomizer technique.     

Preparation and characterization of transparent NiO thin films deposited by spray pyrolysis technique

Nickel oxide thin films were successfully fabricated with various deposition time (t_d = 5, 10, and 15 min) on glass substrates using spray pyrolysis technique. The deposited films undergo thermal treatment at 350 °C for various annealing time (t_a = 0, 15, 30 and 60 min). In this study, the effect of t_d and t_a on film thickness was observed and their influence on structural, morphological and optical properties were investigated. The films deposited with t_d = 5 min showed amorphous structure while the films grown at higher deposition time became partially crystallized with preferred growth along (1 1 1) direction. Heat treatment carried out in air allowed us to tune the polycrystalline structure and the diffraction intensity at preferred peak increases with the increase in t_a which is a consequence of better crystallinity. This was reflected in the AFM micrographs of the films which suggested that the thermal annealing (or increasing t_a) facilitates the process of grain-growth, and improves the crystalline microstructure. The optical transmission of the films was found to vary with t_d and t_a and thus film thickness. The thinner films show higher transparency in the UV–vis spectral region. The optical band gap was blue-shifted from 3.35 eV to 3.51 eV depending on t_a. The effect of t_a on the various optical constants of the NiO films has also been discussed.     

Effect of Mg/Co on the properties of CdS thin films deposited by spray pyrolysis technique

Mg, Co doped and (Mg, Co) co-doped CdS thin films were prepared using chemical spray pyrolysis method. It is observed from the X-ray diffraction study that the deposited film exhibit cubic phase of CdS with preferred orientation along the (111) plane and incorporation of Mg and Co has been confirmed form energy dispersive analysis and XPS analysis as well. The doped and codoped CdS thin films exhibit 1LO and 2LO vibrations as confirmed by Raman spectrum. The core level XPS spectra ensures the incorporation of doping elements precisely. The morphological variations due to the incorporation of Co and Mg in CdS thin films have been observed by FE-SEM. The particle sizes and crystalline nature have been revealed from HRTEM images and corresponding SAED patterns. The co-doped CdS thin films show a significant shift blue in absorption spectrum. Improved magnetic properties have been observed for the co-doped CdS thin films.     

Sensing of LPG with nanostructured zinc oxide thin films grown by spray pyrolysis technique

Nanostructured zinc oxide thin films were prepared by spray pyrolysis technique using Zn(NO₃)₂·6H₂O as the precursor solution. The resulting films were investigated by X-ray diffraction and scanning electron microscopy to know crystal structure, size of crystallites and surface morphology. The films have been found to be polycrystalline zinc oxide, possessing hexagonal wurtzite crystal structure and nanocrystallite with grain size of approximately 30-35 nm. The LPG sensing performance of the films has been investigated at various concentrations of LPG in air at operating temperatures varying from 225 to 400 °C. At 325 °C the maximum responses of 46.3% and 48.9% have been observed, respectively, for concentrations of 0.8 and 1 vol% of LPG in air (1 vol% of LPG in air corresponds to 50% LEL of LPG in air). The recovery time has been found to be less than the response time for all concentrations of LPG. A possible reaction mechanism of LPG sensing has been proposed.     

Synthesis, characterization and photoelectrochemical properties of n-CdS thin films

Cadmium sulfide thin films have been deposited on glass substrates by simple and cost effective chemical bath deposition technique. Triethanolamine was used as a complexing agent. The preparative parameters like ion concentration, temperature, pH, speed of substrate rotation and deposition time have been optimized for good quality thin films. The ‘as-grown’ films are characterized for structural, electrical, optical and photoelectrochemical (PEC) properties. The X-ray diffraction (XRD) studies reveal that the films are polycrystalline in nature. Energy-dispersive analysis by X-ray (EDAX) shows that films are cadmium rich. Uniform deposition of CdS thin films on glass substrate is observed from scanning electron microscopy (SEM) and atomic force microscopy (AFM) micrographs. Optical studies reveal a high absorption coefficient (10⁴ cm⁻¹) with a direct type of transition. The band gap is estimated to be 2.47 eV. The film shows n-type conduction mechanism. The photoelectrochemical (PEC) cell with CdS thin film as a photoanode and sulfide/polysulfide (1 M) solution as an electrolyte have been constructed and investigated for various cell parameters. The solar to electrical conversion efficiency (η) and fill factor (ff) are found to be 0.049% and 0.36, respectively.     

Electrochromic properties of spray deposited TiO2-doped WO3 thin films

TiO₂-doped WO₃ thin films were deposited onto fluorine-doped tin oxide coated conducting glass substrates using spray pyrolysis technique at 525 °C. The volume percentage of TiO₂ dopant was varied from 13% to 38%. The thin film samples were transparent, uniform and strongly adherent to the substrates. Electrochromical properties of TiO₂-doped WO₃ thin films were studied with the help of cyclic voltammetry (CV), chronoamperometry (CA) and chronocoulometry (CC) techniques. It has been found that TiO₂ doping in WO₃ enhances its electrochromic performance. Colouration efficiency becomes almost double and samples exhibit increasingly high reversibility with TiO₂ doping concentrations, in the studied range.     

Physical properties of Pb doped ZnS thin films prepared by ultrasonic spray technique

In the present work, high quality Pb doped ZnS thin films were deposited on glass substrates at 450°C using spray ultrasonic technique. The dependence of the structural, morphological and optical properties of the films on the lead (Pb) doping amount was investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–vis–NIR spectrophotometry, and four-point method. The improvement of the obtained Pb:ZnS thin films properties were discussed as a function of Pb concentration (0.5 to 2 at.%). The average crystallite size of Pb:ZnS was found in the range of 25–37 nm. The scanning electron microscopy (SEM) reveals that the films are continuous, homogeneous and dense. The UV–vis–NIR spectroscopy characterizations demonstrated that all the films exhibit good transmittance (60–70%) in the visible region and their optical band gap energy ($E_{\mathrm{g}}$) changes from 3.92 to 3.6 eV. The films electrical resistivity showed an apparent dependence on Pb content.     

Characterization of Ce1−xZrxO2 thin films prepared by pyrolytic spray technique

It was demonstrated that spray pyrolysis can be used to prepare Ce_1−xZr_xO₂ thin films with x between 0 and 1. The composition of these films was determined by electron probe microanalysis (EPMA), and the crystalline structure by X-ray diffraction (XRD) and Raman spectroscopy (RS). Cyclic voltammetry (CV) was performed in an electrolyte of propylene carbonate with 1 M LiClO₄. Films with high Zr content were incapable of charge exchange of Li⁺ ions. In the contrast, films with high Ce content were found to be able to insert/extract large charge densities of Li⁺ ions. They also remained transparent during Li⁺ intercalation.     

Ab initio study of structural, electronic and optical properties of Ca1−xSrxS compounds

Full-potential linearized augmented plane wave method (FP-LAPW) within density functional theory has been used to calculate structural, electronic and optical properties of Ca_1−xSr_xS, an alkali earth chalcogenide, with varying compositional parameter x in the range 0<x<1. Whereas the structural properties are discussed in terms of charge transfer between the two cations, calculated electronic band structure and density of states have been analyzed in terms of contribution from the S p, Ca d and Sr d states. Furthermore, we have calculated some optical properties such as real and imaginary parts of dielectric constant, ε(ω), and the calculated results have been discussed in comparison with the existing experimental data and other theoretical calculations.     

Structural, morphological and optical properties of CuAlS2 films deposited by spray pyrolysis method

The structural, morphological and optical properties of CuAlS₂ films deposited by spray pyrolysis method have been investigated. CuAlS₂ in the form of films is prepared at different deposition conditions by a simple and economical spray pyrolysis method. The structural, surface morphology and optical properties of the films were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscope (AFM) and absorbance spectra, respectively. The films were polycrystalline, crystallized in a tetragonal structure, and are preferentially orientated along the (1 1 2) direction. Grain size values, dislocation density, and d% error of CuAlS₂ films were calculated. The optical band gap of the CuAlS₂ film was found to be 3.45 eV. The optical constants such as refractive index, extinction coefficient and dielectric constants of the CuAlS₂ film were determined. The refractive index dispersion curve of the film obeys the single oscillator model. Optical dispersion parameters E_o and E_d developed by Wemple-DiDomenico were calculated and found to be 3.562 and 12.590 eV.     

Effect of different dopant elements (Al,Mg and Ni) on microstructural,optical and electrochemical properties of ZnO thin films deposited by spray pyrolysis (SP)

In the present work we studied the influence of the dopant elements and concentration on the microstructural and electrochemical properties of ZnO thin films deposited by spray pyrolysis. Transparent conductive thin films of zinc oxide (ZnO) were prepared by the spray pyrolysis process using an aqueous solution of zinc acetate dehydrate [Zn(CH₃COO)₂·2H₂O] on soda glass substrate heated at 400 ± 5 °C. AlCl₃, MgCl₂ and NiCl₂ were used as dopant. The effect of doping percentage (2–4%) has been investigated. Afterwards the samples were thermally annealed in an ambient air during one hour at 500 °C. X-ray diffraction showed that films have a wurtzite structure with a preferential orientation along the (0 0 2) direction for doped ZnO. The lattice parameters a and c are estimated to be 3.24 and 5.20 ?, respectively. Transmission allowed to estimate the band gaps of ZnO layers. The electrochemical studies revealed that the corrosion resistance of the films depended on the concentration of dopants.     

Composition and thermal-induced effects on the optical constants of Ge20Se80−xBix thin films

 The effects of composition and thermal annealing near crystallization temperature, T_c on the optical and structural properties of Ge₂₀Se_80−xBi_x (x=0, 2.5, 5 and 7.5 at%) was investigated. The influence of incorporation Bi content in Ge₂₀Se_80−xBi_x system results in a gradual decrease in the indirect optical gap from 1.89 to 1.44 eV, this behavior can be explained as increased tailing. On annealing, the optical band gap E_g decreases gradually for the crystallized films while the refractive index increases, this behavior can be attributed to transformation from amorphous to crystalline and was explained in the light of dangling bond model. The refractive index n of as-prepared and annealed films has been analyzed according to the Wwmple–DiDominico single oscillator model and the values of E_o and E_d were determined. The effect of annealing on the nature and degree of crystallization has been investigated by studying the structure using transmission electron microscope, X-ray diffraction and scanning electron microscope.     

Cathodoluminescent and nonlinear optical properties of undoped and erbium doped nanostructured ZnO films deposited by spray pyrolysis

We have deposited zinc oxide (ZnO) and erbium doped zinc oxide (ZnO:Er) thin films on heated glass substrates using spray pyrolysis technique. The effect of erbium dopant on structural, morphological, luminescent and nonlinear optical properties was studied. The deposited films have been analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), ex situ compositional analysis (ESCA), profilometry, cathodoluminescence (CL) and third harmonic generation (THG) measurements. All films were polycrystalline, having a preferential growth orientation along the ZnO (0 0 2) plane, with a corresponding average crystallite size of less than 41 nm. Addition of erbium can effectively control the film surface morphology and its cathodoluminescent properties. The films containing low erbium concentration show a uniform surface covered with hexagonal shaped grains and a strong UV light emission intensity as well as TH response. In contrast, when the erbium doping ratio exceeds 3%, a porous surface with columnar textural growth becomes more pronounced, and a substantial reduction of the cathodoluminescent and TH response. A strong TH signal was obtained for the film with good crystalline quality at the concentration of 2%. Third order nonlinear optical susceptibility (χ^〈3〉) values of the studied materials were in the remarkable range of 10⁻¹² esu.     

Magnetic and optical properties of spinel FexCo3−xO4 thin films

Magnetic and optical properties of Fe_xCo_3−xO₄ thin films grown by sol–gel method have been investigated as the Fe composition (x  ) increases from 0 to 2. X-ray diffraction measurements revealed that the normal- and inverse-spinel phases coexist for 0.76?x?0.93$0.76?x?0.93$. The normal-spinel phase is dominant below x=0.76$x=0.76$ while the inverse-spinel phase above x=0.93$x=0.93$. The lattice constant of the inverse-spinel phase is found to be larger than that of the normal-spinel phase. For both phases the lattice constant increases with increasing x. The Fe_xCo_3−xO₄ films containing the inverse-spinel phase exhibit net magnetization that increases with increasing x  . Conversion electron Mössbauer spectrum measured on the x=0.93$x=0.93$ sample showed that Fe²⁺ ions prefer the octahedral sites, indicating the formation of the inverse-spinel phase. Analysis on the measured optical absorption spectra for the samples by spectroscopic ellipsometry indicates a dominance of the normal-spinel phase for low x in which Fe³⁺ ions mostly occupy the octahedral sites. Observation of a crystal-field transition at 1.6 eV originating from tetrahedral Fe³⁺ ion confirms the existence of the inverse-spinel phase for high x.     

Structural, electronic, thermodynamic and optical properties of SrS1−xOx mixed crystals

The structural, electronic and thermodynamic properties of the SrS_1–xO_x ternary mixed crystals have been studied using the ab initio full potential linearized augmented plane wave (FP-LAPW) method within density functional theory. The effect of composition on lattice parameter, bulk modulus and band gap was investigated. The lattice constants from Vegard's law and the bulk modulus from linear concentration dependence were observed for the alloys. The microscopic origins of the gap bowing were explained by using the approach of Zunger and co-workers. The thermodynamic stability of these alloys was investigated by calculating the excess enthalpy of mixing ΔH_m as well as the phase diagram. In addition to FP-LAPW method, the composition dependence of the refractive index and the dielectric constant was studied by different models.     

Physico-chemical, optical and electrochemical properties of iron oxide thin films prepared by spray pyrolysis

Iron oxide thin films were prepared by spray pyrolysis technique onto glass substrates from iron chloride solution. They were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and (UV-vis) spectroscopy. The films deposited at T_s ≤ 450 °C were amorphous; while those produced at T_sub = 500 °C were polycrystalline α-Fe₂O₃ with a preferential orientation along the (1 0 4) direction. By observing scanning electron microscopy (SEM), it was seen that iron oxide films were relatively homogeneous uniform and had a good adherence to the glass substrates. The grain size was found (by RX) between 19 and 25 nm. The composition of these films was examined by X-ray photoelectron spectroscopy and electron probe microanalysis (EPMA). These films exhibited also a transmittance value about 80% in the visible and infrared range. The cyclic voltammetry study showed that the films of Fe₂O₃ deposited on ITO pre-coated glass substrates were capable of charge insertion/extraction when immersed in an electrolyte of propylene carbonate (PC) with 0.5 M LiCLO₄.     

Laser-induced changes on optical band gap of amorphous and crystallized thin films of Se75S25−xAGx

Optical band gap of amorphous, crystallized, laser induced amorphous and laser induced crystallized films of Se₇₅S_25−xAg_x (x=4, 6 and 8) glassy alloys was studied from absorption spectra. The amorphous and crystallized films were induced by pulse laser for 10 min. After laser irradiation on amorphous and crystalline films, optical band gap was measured. It has been found that the mechanism of the optical absorption follows the rule of indirect transition. The amorphous thin films show an increase in the optical band gap, while the crystallized (thermally annealed) thin films show a decrease in the optical band gap by inducing laser irradiation. Crystallization and amorphization of chalcogenide films were accompanied with the change in the optical band gap. The change in optical energy gap could be determined by identification of the transformed phase. These results are interpreted in terms of concentration of localized states due to shift in Fermi level.     

Structural, optical and electrochromic properties of Nb-doped MoO3 thin films

Niobium (Nb) doped molybdenum trioxide (MoO₃) thin films have been synthesized using spray pyrolysis deposition technique. The structural changes were observed with the help of X-ray diffraction technique. With increasing Nb concentration, the structure of MoO₃ undergoes a phase transformation from α-orthorhombic to amorphous with nano-sized grains. The thread like reticulated morphology is converted into spongy like structure at higher Nb concentration (9 at% Nb). It is seen that Nb doping can lead to significant surface morphology changes in MoO₃ films. It was found that the coloration efficiency increases with doping concentration. With increasing Nb concentration charge capacity, reversibility and electrochemical stability increases. The improvement is attributed to the amorphous structure of the doped samples that favors easy intercalation and deintercalation processes. Hence, we have successfully demonstrated formation of an adequate host for electrochromic devices with Nb (9 at%) doped MoO₃ samples.     

Structure, magnetic and transport properties of La1−xBixMnO3

We have investigated the structural, magnetic and transport properties of La_1−xBi_xMnO₃ samples. As the Bi content increases, a structural transition from rhombohedral to pseudocubic and a magnetic phase transition from ferromagnetic ordering to cluster glass are identified. Metal–insulator (MI) transitions and large magnetoresistance (MR) effects are observed at low Bi doping levels, while insulating behavior of resistivity is found in the whole measured temperature range at high-doping levels. Two distinct ferromagnetic insulating (FI) states are found at low temperatures in this system. One can be suppressed and the other can be enhanced by applying magnetic fields. Possible reasons for the observed structural, magnetic phase transitions and changes of resistivity behavior with Bi doping are discussed.