Characterization and field emission characteristics of carbon nanotubes modified by titanium carbide

Carbon nanotubes (CNTs) were modified by depositing a thin layer of titanium film on the surface using magnetron sputtering method, followed by vacuum annealing at 900 °C for 2 h. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) confirmed that the as-deposited thin titanium film reacted with carbon atoms to form titanium carbide after annealing. The experiment results show that the thickness of sputter-deposited titanium film has significant effect on the field emission J-E characteristic of modified CNTs film. The titanium carbide-modified CNTs film obtained by controlling the titanium sputtering time to 2 min showed an improved field emission characteristics with a significant reduction in the turn-on electric field and an obvious increase in the emission current density as well as an improvement in emission stability. The improvement of field emission characteristics achieved is attributed to the low work function and good resistance to ion bombardment of titanium carbide.     

Growth of carbon nanofibers on aligned zinc oxide nanorods and their field emission properties

Carbon nanofibers were grown by electrodeposition technique onto aligned zinc oxide (ZnO) nanorods deposited by hybrid wet chemical route on glass substrates. X-ray diffraction traces indicated very strong peak for reflections from (0 0 2) planes of ZnO. The Raman spectra were dominated by the presence of G band at about 1597 cm⁻¹ corresponding to the E_2g tangential stretching mode of an ordered graphitic structure with sp² hybridization and a D band at about 1350 cm⁻¹ originating from disordered carbon. Fourier transformed infrared studies indicated the presence of a distinct characteristic absorption peak at ∼511 cm⁻¹ for Zn-O stretching mode. Photoluminescence spectra indicated band edge luminescence of ZnO at ∼3.146 eV along with a low intensity peak at ∼0.877 eV arising out of carbon nanofibers. Field emission properties of these films and their dependence on the CNF coverage on ZnO nanorods are reported here. The average field enhancement factor as determined from the slope of the FN plot was found to vary between 1 × 10³ and 3 × 10³. Both the values of turn-on field and threshold field for CNF/ZnO were lower than pure ZnO nanorods.     

Field emission properties and synthesis of carbon nanotubes grown by rf plasma-enhanced chemical vapor deposition

Plasma-enhanced chemical vapor deposition (PECVD) method was employed to grow the Fe-catalyzed carbon nanotubes (CNTs). The grown CNTs with a uniform diameter in the range of about 10-20 nm and the typical lengths beyond 1 μm resulted in a very high aspect ratio. The Raman and TEM results showed that the grown CNTs contained a large amount of carbonaceous particles and crystal defects, such as pentagon-heptagon pair defects. XPS measurement indicated that the CNTs had CH covalent bonds. Field emission characteristics exhibited the low turn-on threshold field of 2.75 V/μm and the maximum emission current density of 7.75 mA/cm² at 6.5 V/μm. The growth mechanism of CNTs and the effects of hydrogen plasma on their structure were discussed.     

Work function of single-walled carbon nanotubes determined by field emission microscopy

The field emission characteristics of a single micro-bundle of single-walled carbon nanotubes (SWCNTs) were investigated using field emission microscopy (FEM). Fowler–Nordheim plots revealed that the work function of the SWCNTs was reduced with increasing heating temperature, and reached a minimum value around 1000 °C, assuming that the β factor was constant during the heating process. Field emission patterns also demonstrated fine structures that were believed to be images of the cap of a SWCNT, which was in a clean state. The radius of the SWCNT micro-bundle was measured by transmission electron microscopy (TEM), and the β factor was calculated using two empirical formulae. Then, the work function of the SWCNT was determined from the slope, K, of its Fowler–Nordheim plot. The work function values were Φ₁=4.76 eV and Φ₂=4.88 eV, respectively. Received: 26 October 2001 / Revised version: 19 February 2002 / Published online: 6 June 2002     

Efficient field emission from well-oriented Cu2O film

Well-oriented Cu₂O films comprising of octahedral-shaped crystals were grown directly on copper foil via an hydrothermal treatment. The well-oriented films were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Field emission from the film showed good emission properties, and, the electron emission turn-on field (E_to) and threshold field (E_thr) are about 9.6 and 13.4 V/μm respectively, which is similar to the values reported for CuO nanofiber, although the latter has a much larger size. The corresponding Fowler-Nordheim (F-N) plots showed a linear behavior. The sharp corners of the tips are considered as main electron emitters and account for its good performance.     

Field-induced evaporation of carbon nanotubes

We report here an experimental observation of field emission from arrays of multiwall carbon nanotubes. Current densities in the range 10–30 mA/cm² with excellent long-term stability were recorded. A detailed study of the destruction of nanotubes at extreme operation conditions is performed. We established that field evaporation of nanotubes accompanies field emission from a cold cathode at electric fields higher than 2 V/?. Electron microscopy of the evaporation products reveals irregularly shaped carbon nanoparticles with a hollow core. The diameter of the particles is ∼20 nm. A mechanism of the process is proposed and discussed. Received: 6 October 2000 / Accepted: 28 April 2001 / Published online: 27 June 2001     

Field emission properties of carbon nanotube film using a spray method

We fabricated carbon nanotube (CNT) emitters by a spray method using a CNT suspension with ethanol. Indium with a low melting pointing metal or indium tin oxide (ITO) was deposited on the glass substrate. The CNTs were sprayed on these layers and thermally annealed. The sprayed CNTs on an ITO were obtained a high emission current density, field enhancement factor, and a uniform emission pattern than the sprayed CNTs on an ITO layer. We found that the sprayed emitters on the indium layer had good field emission characteristics because of the strong adherence between the metal layer and CNTs.     

Field emission and current-voltage properties of boron nitride nanotubes

We have measured electrical transport properties of boron nitride nanotubes using an in situ manipulation stage inside a transmission electron microscope. Stable currents were measured in a field emission geometry, but in contact the nanotubes are insulating at low bias. At high bias, the nanotubes show stable, reversible breakdown current.     

Effect of temperature on the electron field emission from aligned carbon nanofibers and multiwalled carbon nanotubes

Effect of temperature and aspect ratio on the field emission properties of vertically aligned carbon nanofiber and multiwalled carbon nanotube thin films were studied in detail. Carbon nanofibers and multiwalled carbon nanotube have been synthesized on Si substrates via direct current plasma enhanced chemical vapor deposition technique. Surface morphologies of the films have been studied by a scanning electron microscope, transmission electron microscope and an atomic force microscope. It is found that the threshold field and the emission current density are dependent on the ambient temperature as well as on the aspect ratio of the carbon nanostructure. The threshold field for carbon nanofibers was found to decrease from 5.1 to 2.6 V/μm when the temperature was raised from 300 to 650 K, whereas for MWCNTs it was found to decrease from 4.0 to 1.4 V/μm. This dependence was due to the change in work function of the nanofibers and nanotubes with temperature. The field enhancement factor, current density and the dependence of the effective work function with temperature and with aspect ratio were calculated and we have tried to explain the emission mechanism.     

Thinning and diluting aligned carbon nanotube films for uniform field emission

Aligned carbon nanotube (CNT) films are potential field emitters for large-area flat panel displays. However, the distribution of emission areas in the CNT films is quite non-uniform because of inhomogeneous nanotube growth, which is hard to avoid using the conventional chemical vapor deposition (CVD) method. Here we show that the emission uniformity of CNT films can be improved simply by reducing the film thickness (thinning) or the nanotube density (diluting). The thickness and density of CNT films could be controlled by controlling the CNT growth time and temperature. Received: 12 June 2001 / Accepted: 27 October 2001 / Published online: 23 January 2002     

Improved emission stability of HfC-coated carbon nanotubes field emitters

Plasma-enhanced chemical vapor deposition (PECVD) method was employed to synthesize the Fe-catalyzed carbon nanotubes (CNTs). Hf films were deposited onto the synthesized CNTs, followed by heat treatment at 1200 °C which could form HfC. Field emission properties indicate that the HfC-coated CNTs have good emission current density due to low work function of HfC and also keep stable emission characteristics under poor vacuum owing to the chemical inertness of HfC. Consequently, field emission characteristics of the CNTs can be improved by the HfC-coated surface treatment compared with the synthesized CNTs.     

Enhancement of field emission properties of graphite flakes by producing carbon nanotubes on above using thermal chemical vapor deposition

In order to improve the field emission properties of the graphite flakes, the carbon nanotubes (CNTs) are produced on above without the metallic catalyst using mixtures of C₂H₂ and H₂ gases by thermal chemical vapor deposition. We spin the graphite solution on the silicon wafer and dry it, then synthesize the CNTs on the graphite flakes. We change the synthetic time to obtain the optimal conditions for enhancement of field emission properties of graphite flakes. The experimental results show that the density and quality of the CNTs could be controlled significantly by the synthetic time. Besides, the field emission properties of the treated graphite flakes are also affected greatly by it. The emission current density of the treated graphite flakes reaches to 0.5 mA/cm² at 3 V/μm, and the turn-on field is decreased from 7.7 to 1.9 V/μm after producing the CNTs on above.     

Field emission properties of carbon nanotubes grown on silicon nanowire arrays

Carbon nanotubes are synthesized on the silicon nanowire arrays which are fabricated on silicon substrate by chemical vapor depositing SiCl₄ and H₂ gases in the presence of Au catalysts. The silicon nanowires are single-crystal with lengths up to 100 μm and diameters ranging from 50 to 500 nm. The tangled carbon nanotubes are grown directly from the surface of Si nanowires. The field emission properties of the carbon nanotubes are investigated at the gap of 200 μm. The low turn on and threshold fields are obtained. The stabilization of the emission currents is also presented.     

Preparation and field emission properties of carbon nanotubes cold cathode using melting Ag nano-particles as binder

A new preparation process for carbon nanotubes (CNTs) cold cathode was studied through the replacement of traditional organic or inorganic binder with Ag nano-particles. This method has the advantages of low preparation temperature and fine electrical contact between CNTs paste and substrate. A mixture paste of CNTs, Ag nano-particles and other organic solvents was spreaded on Si substrate. By melting and connecting of Ag nano-particles after sintered 30 min at 250 °C, a flat CNTs films with good field emission properties was obtained. The measurements reveal that the turn on electric field and the threshold electric field of as-prepared CNTs cathode are 2.1 and 3.9 V/μm respectively and the field emission current density is up to 41 mA/cm² at an applied electric field of 4.7 V/μm.     

High-field electron emission of carbon nanotubes grown on carbon fibers

Carbon nanotubes with uniform density were synthesized on carbon fiber substrate by the floating catalyst method. The morphology and microstructure were characterized by scanning electron microscopy and Raman spectroscopy. The results of field emission showed that the emission current density of carbon nanotubes/carbon fibers was 10 μA/cm² and 1 mA/cm² at the field of 1.25 and 2.25 V/μm, respectively, and the emission current density could be 10 and 81.2 mA/cm² with the field of 4.5 and 7 V/μm, respectively. Using uniform and sparse density distribution of carbon nanotubes on carbon fiber substrate, the tip predominance of carbon nanotubes can be exerted, and simultaneously the effect of screening between adjacent carbon nanotubes on field emission performance can also be effectively decreased. Therefore, the carbon nanotubes/carbon fibers composite should be a good candidate for a cold cathode material.     

Enhanced optical and field emission properties of CTAB-assisted hydrothermal grown ZnO nanorods

We have developed a simple N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB)-assisted hydrothermal route for the production of ZnO one-dimensional (1D) nanostructures on zinc foil at reaction temperature of 160 °C. With the increase of CTAB concentration, the one-dimensional structures change from microrod to a mixture of nano- and microrod and finally to nanorods. X-ray diffraction studies confirmed the proper phase formation of the grown nanostructures. The room temperature photoluminescence spectra showed that ZnO nanostructures prepared with increased CTAB concentration exhibited enhanced band edge UV emission and also blue shift of the emission peak. All the samples show no defect related green emission. Field emission property of the 1D structures has been investigated in detail. By tuning the CTAB concentration, the field emission property was optimized. The nanorods synthesized with high CTAB showed turn-on and threshold fields of 3.2 and 5 V/μm, respectively, which are comparable to the values for vapour phase synthesized high field emitting ZnO nanostructures.     

Field emission from nonaligned SiC nanowires

β-SiC nanowires with an average diameter of 8-20 nm were synthesized using a simple thermal evaporation of SiO powders onto activated carbon fibers. Field emission was investigated based on the SiC nanowires deposited on a platinum film. A low turn-on field of 3.1-3.5 V μm⁻¹ was measured at an anode-sample separation of 100-140 μm. This type of SiC nanowires can be applied as field emitters in displays as well as vacuum electronic devices.     

Field emission and photoluminescence characteristics of ZnS nanowires via vapor phase growth

Large-area ZnS nanowires were synthesized through a vapor phase deposition method. X-ray diffraction and electron microscopy results show that the products are composed of single crystalline ZnS nanowires with a cubic structure. The nanowires have sharp tips and are distributed uniformly on silicon substrates. The diameter of the bases is in the range of 320-530 nm and that of the tips is around 20-30 nm. The strong ultraviolet emission in the photoluminescence spectra also demonstrates that the ZnS nanowires are of high crystalline perfection. Field emission measurements reveal that the ZnS nanowires have a fairly low threshold field, which may be ascribed to their very sharp tips, rough surfaces and high crystal quality. The perfect field emission ability of the ZnS nanowires makes them a promising candidate for the fabrication of flexible cold cathodes.     

Large-scale synthesis of neodymium hexaboride nanowires by self-catalyst

Large scale NdB₆ nanowires have been successfully fabricated for the first time using a self-catalyst method with Nd powders and boron trichloride (BCl₃) gas mixed with hydrogen and argon. X-ray diffraction, scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) were used to characterize the samples. Transmission electron microscopy (TEM) reveals that the NdB₆ nanowires are single crystals with cubic structure. Our investigation forms part of a series of studies for finding comparatively inexpensive methods to prepare RB₆ nanomaterials.