Amide-silyl ligand exchanges and equilibria among group 4 amide and silyl complexes

M(NMe2)4 (M = Zr, 1a; Hf, 1b) and the silyl anion (SiButPh2)- (2) in Li(THF)2SiButPh2 (2-Li) were found to undergo a ligand exchange to give [M(NMe2)3(SiButPh2)2]- (M = Zr, 3a; Hf, 3b) and [M(NMe2)5]- (M = Zr, 4a; Hf, 4b) in THF. The reaction is reversible, leading to equilibria: 2 1a (or 1b) + 2 2 <--> 3a (or 3b) + 4a (or 4b). In toluene, the reaction of 1a with 2 yields [(Me2N)3Zr(SiButPh2)2]-[Zr(NMe2)5Li2(THF)4]+ (5) as an ionic pair. The silyl anion 2 selectively attacks the -N(SiMe3)2 ligand in (Me2N)3Zr-N(SiMe3)2 (6a) to give 3a and [N(SiMe3)2]- (7) in reversible reaction: 6a + 2 2 <--> 3a + 7. The following equilibria have also been observed and studied: 2M(NMe2)4 (1a; 1b) + [Si(SiMe3)3]- (8) <--> (Me2N)3M-Si(SiMe3)3 (M = Zr, 9a; Hf, 9b) + [M(NMe2)5]- (M = Zr, 4a; Hf, 4b); 6a (or 6b) + 8 <--> 9a (or 9b) + [N(SiMe3)2]- (7). The current study represents rare, direct observations of reversible amide-silyl exchanges and their equilibria. Crystal structures of 5, (Me2N)3Hf-Si(SiMe3)3 (9b), and [Hf(NMe2)4]2 (dimer of 1b), as well as the preparation of (Me2N)3M-N(SiMe3)2 (6a; 6b) are also reported.     

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.     

Metal-Metal Multiply Bonded Complexes of Technetium. 5.(1) Tris and Tetrakis(formamidinato) Complexes of Ditechnetium

Compounds of the type Tc(2)Cl(4)(PR(3))(4) (PR(3) = PEt(3), PMe(2)Ph, PMePh(2)) react with the molten formamidines HDPhF (HDPhF = diphenylformamidine) and HDTolF (HDTolF = di-p-tolylformamidine) to produce mixtures of tris- and tetrakis-bridged formamidinate complexes of ditechnetium. The displacement of chloride and phosphine by [DPhF](-) was accompanied by the oxidation of the dimetal core to produce the mixed-valent complexes Tc(2)(DPhF)(3)Cl(2) (1) and Tc(2)(DPhF)(4)Cl (2) in modest yield. The solid-state structures of the di-p-tolyl analog of 1, Tc(2)(DTolF)(3)Cl(2) (1a), and Tc(2)(DPhF)(4)Cl.C(7)H(8) (2.C(7)H(8)) have been determined by single crystal X-ray diffraction studies and are described in detail. The structure of 1a consists of three formamidinate ligands spanning the two technetium atoms. The two chloride ligands, which complete the coordination sphere, are bound equatorially at distances of 2.357(1) and 2.346(2) ? from the metals. Though possessing no crystallographic symmetry, 1a approximates C(2)(v)() symmetry. The metal-metal bond length of 2.0937(6) ? ranks among the shortest reported for technetium and is indicative of a Tc-Tc multiple bond. Compound 2 crystallizes with the Tc atoms colinear with a crystallographic 4-fold axis. The four bridging formamidinate ligands are arranged in a lantern geometry about the dimetal unit. The chloride is bonded in an axial position at a distance of 2.450(4) ?. The Tc-Tc bond length of 2.119(2) ? is also consistent with the presence of a high order Tc-Tc bond. The electronic structures of 1 and 2 were investigated by means of SCF-Xalpha-SW molecular orbital calculations using the model compounds Tc(2)(HNCHNH)(3)Cl(2) and Tc(2)(HNCHNH)(4)Cl. The results support the presence of a sigma(2)pi(4)delta(2)delta ground state configuration giving rise to a formal bond order of 3.5. The LUMO in both cases is a low-lying pi orbital. The formamidinate complexes 1 and 2 have been further characterized by IR spectroscopy and cyclic voltammetry. The crystallographic parameters for 1a and 2.C(7)H(8) are as follows: Tc(2)(DTolF)(3)Cl(2) (1a), monoclinic space group P2(1)/n (No. 14) with a = 16.185(2) ?, b = 15.637(2) ?, c = 17.812(1) ?, beta = 110.142(5) degrees, V = 4232.3(6) ?(3) and Z = 4; Tc(2)(DPhF)(4)Cl.C(7)H(8) (2.C(7)H(8)), tetragonal space group P4/ncc (No. 130) with a = 15.245(2) ?, c = 21.832(3) ?, V = 5074.1(9) ?(3) and Z = 4.     

Variable coordination mode of chloranilic acid. Synthesis, structure, and electrochemical properties of some osmium complexes

Reaction of chloranilic acid (H2ca) with [Os(bpy)2 Br2] (bpy = 2,2'-bipyridine) affords a dinuclear complex of type [{Os(bpy)2}2 (ca)]2+, isolated as the perchlorate salt. A similar reaction of H2ca with [Os(PPh3)2 (pap)Br2] (pap = 2-(phenylazo)pyridine) affords a dinuclear complex of type [{Os(PPh3)2 (pap)}2 (ca)]2+ (isolated as the perchlorate salt) and a mononuclear complex of type [Os(PPh3)2 (pap)(ca)]. Reaction of H2ca with [Os(PPh3)2(CO)2(HCOO)2] gives a dinuclear complex of type [{Os(PPh3)2(CO)2}2 (r-ca)], where r-ca is the two electron reduced form of the chloranilate ligand. The structures of the [{Os(PPh3)2 (pap)}2 (ca)](ClO4)2, [Os(PPh3)2 (pap)(ca)], and [{Os(PPh3)2(CO)2}2 (r-ca)] complexes have been determined by X-ray crystallography. In the [{Os(bpy)2}2 (ca)]2+ and [{Os(PPh3)2 (pap)}2 (ca)]2+ complexes, the chloranilate dianion is serving as a tetradentate bridging ligand. In the [Os(PPh3)2 (pap)(ca)] complex, the chloranilate dianion is serving as a bidentate chelating ligand. In the [{Os(PPh3)2(CO)2}2 (r-ca)] complex, the reduced form of the chloranilate ligand (r-ca(4-)) is serving as a tetradentate bridging ligand. All the four complexes are diamagnetic and show intense metal-to-ligand charge-transfer transitions in the visible region. The [Os(PPh3)2 (pap)(ca)] complex shows an Os(II)-Os(III) oxidation, followed by an Os(III)-Os(IV) oxidation on the positive side of a standard calomel electrode. The three dinuclear complexes show two successive oxidations on the positive side of SCE. The mixed-valent Os(II)-Os(III) species have been generated in the case of the two chloranilate-bridged complexes by coulometric oxidation of the homovalent Os(II)-Os(II) species. The mixed-valent Os(II)-Os(III) species show intense intervalence charge-transfer transitions in the near-IR region.     

Evidence of CH2O (a3A2) and C2H4 (a3B1u) produced from photodissociation of 1,3-trimethylene oxide at 193 nm

We investigated the dissociative ionization of formaldehyde (CH(2)O) and ethene (C(2)H(4)) produced from photolysis of 1,3-trimethylene oxide at 193 nm using a molecular-beam apparatus and vacuum-ultraviolet radiation from an undulator for direct ionization. The CH(2)O (C(2)H(4)) product suffers from severe dissociative ionization to HCO(+) (C(2)H(3) (+) and C(2)H(2) (+)) even though photoionization energy is as small as 9.8 eV. Branching ratios of fragmentation of CH(2)O and C(2)H(4) following ionization are revealed as a function of kinetic energy of products using ionizing photons from 9.8 to 14.8 eV. Except several exceptions, branching ratios of daughter ions increase with increasing photon energy but decrease with increasing kinetic energy. The title reaction produces CH(2)O and C(2)H(4) mostly on electronic ground states but a few likely on triplet states; C(2)H(4) (a(3)B(1u)) seems to have a yield greater than CH(2)O (a(3)A(2)). The distinct features observed at small kinetic energies of daughter ions are attributed to dissociative ionization of photoproducts CH(2)O (a(3)A(2)) and C(2)H(4) (a(3)B(1u)). The observation of triplet products indicates that intersystem crossing occurs prior to fragmentation of 1,3-trimethylene oxide.     

Experimental studies of the dynamics of the bond-forming reactions of CF2(2+) with H2O using position-sensitive coincidence spectroscopy

The dynamics of the product channels forming OCF(+)+H(+)+HF and HCF(2) (+)+H(+)+O following the collisions of CF(2) (2+) with H(2)O have been investigated with a new position-sensitive coincidence experiment at a center-of-mass collision energy of 5.6 eV. The results show the formation of OCF(+) occurs via the formation of a doubly charged collision complex [H(2)O-CF(2)](2+) which subsequently undergoes a charge separating dissociation to form H(+) and HOCF(2) (+). The HOCF(2) (+) monocation subsequently fragments to form HF+OCF(+). The lifetimes of the collision complex and the HOCF(2) (+) ion are at least of the order of their rotational period. The kinetic energy release in this reaction indicates that it involves the ground state of CF(2) (2+) and forms the ground electronic states of OCF(+) and HF. The mechanism for forming HCF(2) (+) involves the direct and rapid abstraction of a hydride ion from H(2)O by CF(2) (2+). The resulting OH(+) ion subsequently fragments to H(+)+O, on a time scale at least comparable with its rotational period.     

Dehydrophenylnitrenes: quartet versus doublet states

The geometries and energies of 4-, 3-, and 2-dehydrophenylnitrenes (3, 4, and 5) are investigated using complete active space self-consistent field (CASSCF), multiconfiguration quasi-degenerate second-order perturbation (MCQDPT), and internally contracted multiconfiguration-reference configuration interaction (MRCI) theories in conjunction with a correlation consistent triple-zeta basis set. 4-Dehydrophenylnitrene 3 has a quartet ground state ((4)A(2)). The adiabatic excitation energies to the (2)A(2), (2)B(2), (2)A(1), and (2)B(1) states are 5, 21, 34, and 62 kcal mol(-1), respectively. The (2)B(2) state has pronounced closed-shell carbene/iminyl radical character, while the lowest-energy (2)B(1) state is a combination of a planar allene and a 2-iminylpropa-1,3-diyl. The MCQDPT treatment overestimates the excitation energy to (2)B(2) significantly as compared to CASSCF and MRCI+Q. Among quartet states, (4)A(2)-3 is the most stable one, while those of 4 and 5 (both (4)A') are 3 and 1 kcal mol(-1) higher in energy. 5 also has a quartet ground state and a (2)A' ' state 7 kcal mol(-1) higher in energy. On the other hand, the doublet-quartet energy splitting is -6 kcal mol(-1) for 4 in favor of the doublet state ((2)A'). Hence, (2)A'-4 is the most stable dehydrophenylnitrene, 3.5 kcal mol(-1) below (4)A(2) of 3. The geometry of (2)A'-4 shows the characteristic features of through-bond interaction between the in-plane molecular orbitals at N and at C3. The (2)A' state of 4 resembles the (2)A(1) state of 3 and lies 32 kcal mol(-1) above (4)A'-4. The lowest-energy (2)A' state of 5, on the other hand, resembles the (2)B(2) state of 3 and lies 22 kcal mol(-1) above (4)A'-5.     

Synthesis and Characterization of Sterically Encumbered Derivatives of Aluminum Hydrides and Halides: Assessment of Steric Properties of Bulky Terphenyl Ligands

The synthesis and characterization of several sterically encumbered monoterphenyl derivatives of aluminum halides and aluminum hydrides are described. These compounds are [2,6-Mes(2)C(6)H(3)AlH(3)LiOEt(2)](n)() (1), (Mes = 2,4,6-Me(3)C(6)H(2)-), 2,6-Mes(2)C(6)H(3)AlH(2)OEt(2) (2), [2,6-Mes(2)C(6)H(3)AlH(2)](2) (3), 2,6-Mes(2)C(6)H(3)AlCl(2)OEt(2) (4), [2,6-Mes(2)C(6)H(3)AlCl(3)LiOEt(2)](n)() (5), [2,6-Mes(2)C(6)H(3)AlCl(2)](2) (6), TriphAlBr(2)OEt(2) (7), (Triph = 2,4,6-Ph(3)C(6)H(2)-), [2,6-Trip(2)C(6)H(3)AlH(3)LiOEt(2)](2) (8) (Trip = 2,4,6-i-Pr(3)C(6)H(2)-), 2,6-Trip(2)C(6)H(3)AlH(2)OEt(2) (9), [2,6-Trip(2)C(6)H(3)AlH(2)](2) (10), 2,6-Trip(2)C(6)H(3)AlCl(2)OEt(2) (11), and the partially hydrolyzed derivative [2,6-Trip(2)C(6)H(3)Al(Cl)(0.68)(H)(0.32)(&mgr;-OH)](2).2C(6)H(6) (12). The structures of 2, 3a, 4, 6, 7, 9a, 10a, 10b, 11, and 12 were determined by X-ray crystallography. The structures of 3a, 9a, 10a, and 10b, are related to 3, 9, and 10, respectively, by partial occupation of chloride or hydride by hydroxide. The compounds were also characterized by (1)H, (13)C, (7)Li, and (27)Al NMR and IR spectroscopy. The major conclusions from the experimental data are that a single ortho terphenyl substituent of the kind reported here are not as effective as the ligand Mes (Mes = 2,4,6-t-Bu(3)C(6)H(2)-) in preventing further coordination and/or aggregation involving the aluminum centers. In effect, one terphenyl ligand is not as successful as a Mes substituent in masking the metal through agostic and/or steric effects.     

Synthesis and structural characterization of some selenoruthenates and telluroruthenates

The reaction of solid [RuClCp(PPh(3))(2)] with TeSe(3)(2-) or Se(n)(2-) in DMF leads to the formation of [RuCp(PPh(3))(mu(2)-Se(2))](2) (1). In the structure of this compound the two bridging Se(2) groups lead to a six-membered Ru(2)Se(4) ring in a chair conformation. Attached to each Ru center is a PPh(3) ligand in an equatorial position and a Cp ring in an axial position. The compound is diamagnetic. The compound [Ru(2)Cp(2)(mu(3)-Se(2))(mu(3)-Se)](2) (2) is obtained under similar conditions in the presence of air. This structure comprises a centrosymmetric Ru(4)Se(6) dimer formed from the two bridging Se groups and the two bridging Se(2) groups. Each Ru center is pi-bonded to a Cp ring. The reaction of solid [RuClCp(PPh(3))(2)] with a Te(n)(2-) polytelluride solution in DMF leads to the diamagnetic compound [(RuCp(PPh(3)))(2)(mu(2)-(1,4-eta:3,6-eta)Te(6))] (3). Here the Ru centers are bound to a bridging Te(6) chain at the 1, 4, 3, and 6 positions, leading to a bicyclic Ru(2)Te(6) ring. Each Ru atom is bound to a Cp ring and a PPh(3) group. This dimer possesses a center of symmetry. The structure of 3 is the first example of a bicyclic complex where fusion occurs along a Te-Te bond. If the same reaction is carried out in DMF/CH(2)Cl(2), rather than DMF, then [(RuCp(PPh(3)))(2)(mu(2)-(1,4-eta:3,6-eta)Te(6))].CH(2)Cl(2) (4) is obtained. In the solid state it possesses the same Ru(2)Te(6) structural unit as does 3, but the unit lacks a crystallographically imposed center of symmetry. The electronic structures of 3 and 4 have been analyzed with the use of first principles density functional theory. Bond order analysis indicates that the Te-Te bond where fusion occurs has a shared bonding charge of about (2)/(3) of that found for Te-Te single bonds.     

Dioxomolybdenum(VI) Complexes with New Enantiomerically Pure Amino Diol Ligands

(R)-Phenylglycinol is shown to be an efficient building block for the synthesis of chiral amino diols in pure diastereomeric form by epoxide ring-opening reactions. The reaction with rac-trans-stilbene oxide gives [HOCH(2)-(R)-PhCH]NH[(S)-PhCH-(R)-PhCHOH] [2(R)-3(R)-4(S)-HNO(2)H(2)] in 32% yield, which can be methylated at nitrogen to give enantiomerically pure [HOCH(2)-(R)-PhCH]NCH(3)[(S)-PhCH-(R)-PhCHOH] [2(R)-3(R)-4(S)-MeNO(2)H(2)]. These amino diol ligands have been used to prepare chiral dioxomolybdenyl complexes of the formula N(R)-2(R)-3(R)-4(S)-(HNO(2))MoO(2) (1) and N(R)-2(R)-3(R)-4(S)-(MeNO(2))MoO(2) (2). The absolute configuration at each stereocenter in the Mo(VI) complexes has been established by (1)H NOESY spectroscopy. The configuration determined for 1 has been confirmed by an X-ray analysis. Crystal data: orthorhombic P2(1)2(1)2(1), a =7.620(3), b = 13.589(2), c = 20.339(3) ?, Z = 4, R = 0.0336. The structure consists of a polymeric chain of N(R)-2(R)-3(R)-4(S)-(HNO(2))MoO(2) molecules connected through unsymmetrical Mo=O --> Mo bridges. Each metal center is coordinated in a distorted octahedral geometry by a cis dioxo unit and by two trans alkoxo atoms. The coordination polyhedron is completed by a nitrogen atom and by a bridging oxo oxygen atom from an adjacent molecule. Compound 2 catalyzes the oxidation of PPh(3) to OPPh(3) by DMSO through a mechanism that involves the intermediacy of a Mo(IV) species.     

Influence of the electronics of the phosphine ligands on the H-H bond elongation in dihydrogen complexes

Five new monocationic dihydrogen complexes of ruthenium of the type trans-[RuCl(eta(2)-H(2))(PP)(2)][BF(4)] (PP = bis-1,2(diarylphosphino)ethane, aryl = p-fluorobenzyl, 1a, benzyl, 2a, m-methylbenzyl, 3a, p-methylbenzyl, 4a, p-isopropylbenzyl, 5a) have been prepared by protonating the precursor hydride complexes trans-[RuCl(H)(PP)(2)] using HBF(4).OEt(2). The dihydrogen complexes are quite stable and have been isolated in the solid state. The intact nature of the H-H bond in these derivatives has been established from the short spin-lattice relaxation times (T1, ms) and observation of substantial H, D couplings in the HD isotopomers. The H-H bond distances (dHH, A) increase systematically from 0.97 to 1.03 A as the electron-donor ability of the substituent on the diphosphine ligand increases from the p-fluorobenzyl to the p-isopropylbenzyl moiety. The d(HH) in trans-[Ru(eta(2)-H(2))(Cl)((C(6)H(5)CH(2))(2)PCH(2)CH(2)P(CH(2)C(6)H(5))(2))(2)][BF(4)], 2a, was found to be 1.08(5) A by X-ray crystallography. In addition, two new 16-electron dicationic dihydrogen complexes of the type [Ru(eta(2)-H(2))(PP)(2)][OTf](2) (PP = (ArCH(2))(2)PCH(2)CH(2)P(CH(2)Ar)(2), Ar = m-CH(3)C(6)H(4-), 6a, p-CH(3)C(6)H(4)-, 7a) have also been prepared and characterized. These derivatives were found to possess elongated dihydrogen ligands.     

A family of vanadate esters of monoionized and diionized aromatic 1,2-diols: synthesis,structure, and redox activity

The concerned diols (general abbreviation, H(2)L) are catechol (H(2)L(1)) and its 3,5-Bu(t)(2) derivative (H(2)L(2)). Esters of the type VO(xsal)(HL), 2, are obtained by reacting H(2)L with VO(xsal)(H(2)O) or VO(xsal)(OMe)(HOMe), where xsal(2-) is the diionized salicylaldimine of glycine (x = g), L-alanine (x = a), or L-valine (x = v). The reaction of VO(acac)(2) with H(2)L and the salicylaldimine (Hpsal) of 2-picolylamine has furnished VO(psal)(L), 3. In the structures of VO(gsal)(HL(1)), 2a, and VO(vsal)(HL(2)), 2f, the HL(-) ligand is O,O-chelated, the phenolic oxygen lying trans to the oxo oxygen atom. The xsal(2-) coligand has a folded structure and the conformation of 2f is exclusively endo. In both 2a and 2f the phenolic oxygen atom is strongly hydrogen bonded (O...O, 2.60 A) to a carboxylic oxygen atom of a neighboring molecule. In VO(psal)(L(2)).H(2)O, 3b, the diionized diol is O,O-chelated to the metal and the water molecule is hydrogen bonded to a phenoxidic oxygen atom (O.O, 2.84 A). The C-O and C-C distances in the V(diol) fragment reveal that 2 is a pure catecholate and 3 is a catecholate-semiquinonate hybrid. In solution each ester gives rise to a single (51)V NMR signal (no diastereoisomers), which generally shifts downfield with a decrease in the ester LMCT band energy. The V(V)/V(IV) and catecholate-semiquinonate reduction potentials lie near -0.75 and 0.35, and 1.10 and 0.70 V vs SCE for 2 and 3, respectively. Molecular oxygen reacts smoothly with 2 quantitatively furnishing the corresponding o-quinone, and in the presence of H(2)L the reaction becomes catalytic. In contrast, type 3 esters are inert to oxygen. The initial binding of O(2) to 2 is proposed to occur via hydrogen bonding with chelated HL(-).     

Role of the phosphine ligands on the stabilization of monoadducts of the model nucleobases 1-methylcytosine and 9-methylguanine in platinum(II) complexes

The addition of 1-methylcytosine (1-MeCy) or 9-methylguanine (9-MeGu) to solutions of cis-(PPh3)2P(ONO2)2 (1a), in a molar ratio of 1:1, affords the monoadducts cis-[(PPh3)2Pt(1-MeCy)(ONO2)]NO3 (2a) and cis-[(PPh3)2Pt(9-MeGu)(ONO2)]NO3 (3a) and only trace amounts of the bisadducts cis-[(PPh3)2Pt(1-MeCy)2](NO3)2 (4a) and cis-[(PPh3)2Pt(9-MeGu)2](NO3)2 (5a), respectively. The X-ray structural determination of 2a and 3a indicates a strong pi-pi stacking interaction between one of the PPh3 phenyl groups and the pyrimydinic N3-platinated cytosine or the imidazole part of the N7-coordinated guanine base. The addition of a further equiv of nucleobase to the monoadducts forms quantitatively the bisadducts that have been isolated as pure compounds 4a and 5a. Under the same experimental conditions, the dinitrato analogue cis-[(PMePh2)2Pt(ONO2)2] (1b) forms the monoadducts 2b and 3b in equilibrium with a relatively high concentration (20-30%) of the bisadducts cis-[(PMePh2)2Pt(1-MeCy)2](NO3)2 (4b) and cis-[(PMePh2)2Pt(9-MeGu)2](NO3)2 (5b), which have been structurally characterized by single-crystal X-ray analysis. The characterization of the isolated complexes by multinuclear NMR spectroscopy is also described.     

Perturbation analysis for the rotational spectrum of the NiBr radical in the X2Pi3/2 and A2Delta5/2 states

The millimeter- and submillimeter-wave spectra of the NiBr radical in the X (2)Pi(3/2) and A (2)Delta(5/2) states were observed by a source-modulated microwave spectrometer. The NiBr radical was generated in a dc glow discharge through the mixture of Br(2) vapor and Ar gas by the sputtering reaction with a Ni cathode. Observed transition frequencies were independently analyzed for both electronic states using a standard polynomial expression of a Hund's case (c) approximation. Anomalous behavior of the effective molecular constants in the X (2)Pi(3/2) state was interpreted as the result of the perturbation between the X (2)Pi(3/2) and A (2)Delta(5/2) states. The deperturbed molecular constants were derived using a simplified supermultiplet Hamiltonian including the interaction terms between the two electronic states.     

Supramolecular structural variations with changes in anion and solvent in silver(I) complexes of a semirigid, bitopic tris(pyrazolyl)methane ligand

The bitopic ligand p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2) (pz = pyrazolyl ring) that contains two tris(pyrazolyl)methane units connected by a semirigid organic spacer reacts with silver(I) salts to yield [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgX)(2)]( infinity ), where X = CF(3)SO(3)(-) (1), SbF(6)(-) (2), PF(6)(-) (3), BF(4)(-) (4), and NO(3)(-) (5). Crystallization of the first three compounds from acetone yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgCF(3)SO(3))(2)]( infinity ) (1a), [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))(2)[(CH(3))(2)CO](2)]( infinity ) (2b), and [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)AgPF(6)]( infinity ) (3a), where the stoichiometry for the latter compound has changed from a metal:ligand ratio of 2:1 to 1:1. The structure of 1a is based on helical argentachains constructed by a kappa(2)-kappa(1) coordination to silver of the tris(pyrazolyl)methane units. These chains are organized into a tubular 3D structure by cylindrical [(CF(3)SO(3))(6)](6)(-) clusters that form weak C-H...O hydrogen bonds with the bitopic ligand. The same kappa(2)-kappa(1) coordination is present in the structure of 2a, but the structure is organized by six different tris(pyrazolyl)methane units from six ligands bonding with six silvers to form a 36-member argentamacrocycle core. The cores are organized in a tubular array by the organic spacers where each pair of macrocycles sandwich six acetone molecules and one SbF(6)(-) counterion. The structure of 3a is based on a kappa(2)-kappa(0) coordination mode of each tris(pyrazolyl)methane unit forming a helical coordination polymer, with two strands organized in a double stranded helical structure by a series of C-H...pi interactions between the central arene rings. Crystallization of 2-4 from acetonitrile yields complexes of the formula [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)[(AgX)(2)(CH(3)CN)(n)]]( infinity ) where n = 2 for X = SbF(6)(-) (2b), X = PF(6)(-) (3b) and n = 1 for X = BF(4)(-) (4b). All three structures contain argentachains formed by a kappa(2)-kappa(1) coordination mode of the tris(pyrazolyl)methane units linked by the organic spacer and arranged in a 2D sheet structure with the anions sandwiched between the sheets. Crystallization of 5 from acetonitrile yields crystals of the formula [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgNO(3))(2)(CH(3)CN)(4)]( infinity ), where the nitrate is bonded to the silver. The argentachains, again formed by kappa(2)-kappa(1) coordination, are arranged in W-shaped sheets that have an overall configuration very different from 2b-4b. Treating [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))(2)]( infinity ) with a saturated aqueous solution of KPF(6) or KO(3)SCF(3) slowly leads to complete exchange of the anion. Crystallization of a sample that contains an approximately equal mixture of SbF(6)(-)/PF(6)(-) from acetonitrile yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)[Ag(2)(PF(6))(0.78(1))(SbF(6))(1.22(1))(CH(3)CN)(2)][(CH(3)CN)(0.25) (C(4)H(10)O)(0.25)]]( infinity ), a compound with a sheet structure analogous to 2b-4b. Crystallization of the same mixture from acetone yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))[(CH(3))(2)CO](1.5)]( infinity ), where the metal-to-ligand ratio is 1:1 and the [C(pz)(3)] units are kappa(2)-kappa(0) bonded forming a coordination polymer. The supramolecular structures of all species are organized by a combination of C-H...pi, pi-pi, or weak C-H-F(O) hydrogen bonding interactions.     

Anionic Roussin's red esters (RREs) syn-/anti-[Fe(mu-SEt)(NO)2]2(-): the critical role of thiolate ligands in regulating the transformation of RREs into dinitrosyl iron complexes and the anionic RREs

The anionic syn-/ anti-[Fe(mu-SEt)(NO) 2] 2 (-) ( 2a) were synthesized and characterized by IR, UV-vis, EPR, and X-ray diffraction. The geometry of the [Fe(mu-S) 2Fe] core is rearranged in going from [{Fe(NO) 2} (9)-{Fe(NO) 2} (9)] Roussin's red ester [Fe(mu-SEt)(NO) 2] 2 ( 1a) (Fe...Fe distance of 2.7080(5) A) to the [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] complex 2a (Fe...Fe distance of 2.8413(6) A) to minimize the degree of Fe...Fe interaction to stabilize complex 2a. On the basis of X-ray absorption (Fe K- and L-edge), EPR and SQUID, complex 2a is best described as the anionic [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] Roussin's red ester with the fully delocalized mixed-valence core. The complete bridged-thiolate cleavage yielded DNIC [(EtS) 2Fe(NO) 2] (-) ( 3a) in the reaction of 2 equiv of [EtS] (-) and complex 1a, whereas reaction of 2 equiv of [(t)BuS] (-) with [Fe(micro-S (t)Bu)(NO) 2] 2 (1b) gave DNIC [((t)BuS) 2Fe(NO) 2] (-) (3b) and the anionic Roussin's red ester [Fe(mu-S (t)Bu)(NO) 2] 2 (-) (2b) through bridged-thiolate cleavage in combination with reduction. In contrast to the inertness of DNIC 3b toward complex 1b, nucleophile DNIC 3a induces the reduction of complex 1a to produce the anionic Roussin's red ester 2a. Interestingly, dissolution of complex 3a in MeOH at 298 K finally led to the formation of a mixture of complexes 2a and 3a, in contrast to the dynamic equilibrium of complexes 3b and 1b observed in dissolution of complex 3b in MeOH. These results illustrate the aspect of how the steric structures of nucleophiles ([EtS] (-) vs [ (t)BuS] (-) and [(EtS) 2Fe(NO)2](-) vs [((t)BuS) 2Fe(NO)2] (-)) function to determine the reaction products.     

Trisilane-1,3-diolato complexes of Ti and Zr: syntheses and X-ray crystal structures

The syntheses and structures of zirconium and titanium complexes containing the novel chelating trisilane-1,3-diolate ligand [Me2Si(R2SiO)2]2- (R = SiMe3) (5)-H2 are reported. The chloride complexes [Me2Si(R2SiO)2]TiCl2 (7a) and [Me2Si(R2SiO)2]ZrCl2 x 2 THF (7b) were prepared by the reaction of MCl4 (M = Ti, Zr) with [Me2Si(R2SiO)2]2Ti (6a) and [Me2Si(R2SiO)2]2Zr (6b), which are derived from the reaction of 5 with M(NEt2)4, respectively. In the presence of TiCl4, complexes 6a and 7a undergo a ring-opening reaction to produce the dinuclear complex [Me2Si(R2SiO)2][TiCl3]2 (9). [Me2Si(R2SiO)2]TiMe2 (10) and [Me2Si(R2SiO)2]TiBnz2 (11) were prepared in moderate yields from reactions of 7a with 2 equiv of MeMgBr and BnzMgCl, respectively. According to NMR spectroscopic investigations, the reaction of the dimethyltitanium complex 10 with B(C6F5)3 led to full exchange of both methyl groups by C6F5 groups under quantitative formation of [Me2Si(R2SiO)2]Ti(C6F5)2 (12) and a mixture of B(C6F5)(3-n)Me(n), where n = 1-3. The structure of 12 is further evidenced by the preparation of an identical sample from the reaction of 7a with 2 equiv of C6F5MgBr. Refluxing an ether solution of 12 surprisingly gave [Me2Si(R2SiO)2]2TiC6F5]2O (13) as a result of ether cleavage. The structures of the complexes 7a, 7b, 9, 10, and 13 were determined by X-ray crystallography, and structural discussion of the bond parameters will be given.     

Redox chemistry of tellurium bis(tert-butylamido)cyclodiphosph(V)azane disulfide and diselenide systems: a spectroscopic and structural study

The redox chemistry of tellurium-chalcogenide systems is examined via reactions of tellurium(IV) tetrachloride with Li[(t)()BuN(E)P(mu-N(t)Bu)(2)P(E)N(H)(t)Bu] (3a, E = S; 3b, E = Se). Reaction of TeCl(4) with 2 equiv of 3a in THF generates the tellurium(IV) species TeCl(3)[HcddS(2)][H(2)cddS(2)] 4a [cddS(2) = (t)BuN(S)P(mu-N(t)Bu)(2)P(S)N(t)Bu] at short reaction times, while reduction to the tellurium(II) complex TeCl(2)[H(2)cddS(2)](2) 5a is observed at longer reaction times. The analogous reaction of TeCl(4) and 3b yields only the tellurium(II) complex TeCl(2)[H(2)cddSe(2)](2) 5b. The use of 4 equiv of 3a or 3b produces Te[HcddE(2)](2) (6a (E = S) or 6b (E = Se)). NMR and EPR studies of the 5:1 reaction of 3a and TeCl(4) in THF or C(6)D(6) indicate that the formation of the Te(II) complex 6a via decomposition of a Te(IV) precursor occurs via a radical process to generate H(2)cddS(2). Abstraction of hydrogen from THF solvent is proposed to account for the formation of 2a. These results are discussed in the context of known tellurium-sulfur and tellurium-nitrogen redox systems. The X-ray crystal structures of 4a.[C(7)H(8)](0.5), 5a, 5b, 6a.[C(6)H(14)](0.5), and 6b.[C(6)H(14)](0.5) have been determined. The cyclodiphosph(V)azane dichalcogenide ligand chelates the tellurium center in an E,N (E = S, Se) manner in 4a.[C(7)H(8)](0.5), 6a.[C(6)H(14)](0.5), and 6b.[C(6)H(14)](0.5) with long Te-N bond distances in each case. Further, a neutral H(2)cddS(2) ligand weakly coordinates the tellurium center in 4a small middle dot[C(7)H(8)](0.5) via a single chalcogen atom. A similar monodentate interaction of two neutral ligands with a TeCl(2) unit is observed in the case of 5a and 5b, giving a trans square planar arrangement at tellurium.     

Formation and characterization of the oxygen-rich scandium oxide/dioxygen complexes ScOn (n = 4, 6, 8) in solid argon

The reactions of scandium atoms and O(2) have been reinvestigated using matrix isolation infrared spectroscopy and density functional theory calculations. A series of new oxygen-rich scandium oxide/dioxygen complexes were prepared and characterized. The ground state scandium atoms react with dioxygen to form OSc(eta(2)-O(3)), a side-on bonded scandium monoxide-ozonide complex. The OSc(eta(2)-O(3)) complex rearranges to a more stable Sc(eta(2)-O(2))(2) isomer under visible light irradiation, which is characterized to be a side-on bonded superoxo scandium peroxide complex. The homoleptic trisuperoxo scandium complex, Sc(eta(2)-O(2))(3), and the superoxo scandium bisozonide complex, (eta(2)-O(2))Sc(eta(2)-O(3))(2), are also formed upon sample annealing. The Sc(eta(2)-O(2))(3) complex is determined to have a D(3h) symmetry with three equivalent side-on bonded superoxo ligands around the scandium atom. The (eta(2)-O(2))Sc(eta(2)-O(3))(2) complex has a C(2) symmetry with two equivalent side-on bonded O3 ligands and one side-on bonded superoxo ligand.     

Experimental and theoretical investigations of the redox behavior of the heterodichalcogenido ligands [(EP(i)Pr2)(TeP(i)Pr2)N](-) (E = S, Se): cyclic cations and acyclic dichalcogenide dimers

The two-electron oxidation of the lithium salts of the heterodichalcogenidoimidodiphosphinate anions [(EP (i)Pr 2)(TeP (i)Pr 2)N] (-) ( 1a, E = S; 1b, E = Se) with iodine yields cyclic cations [(EP (i)Pr 2)(TeP (i)Pr 2)N] (+) as their iodide salts [(SP (i)Pr 2)(TeP (i)Pr 2)N]I ( 2a) and [(SeP (i)Pr 2)(TeP (i)Pr 2)N]I ( 2b). The five-membered rings in 2a and 2b both display an elongated E-Te bond as a consequence of an interaction between tellurium and the iodide anion. One-electron reduction of 2a and 2b with cobaltocene produces the neutral dimers (EP (i)Pr 2NP (i)Pr 2Te-) 2 ( 3a, E = S; 3b, E = Se), which are connected exclusively through a Te-Te bond. Two-electron reduction of 2a and 2b with 2 equiv of cobaltocene regenerates the corresponding dichalcogenidoimidodiphosphinate anions as ion-separated cobaltocenium salts Cp 2Co[(EP (i)Pr 2)(TeP (i)Pr 2)N] ( 4a, E = S; 4b, E = Se). The ditellurido analogue Cp 2Co[(TeP (i)Pr 2) 2N] ( 4c) has been prepared in the same manner for comparison. Density functional theory calculations reveal that the preferential interaction of the iodide anion with tellurium is determined by the polarization of the lowest unoccupied molecular orbital [sigma*(E-Te)] of the cations in 2a and 2b toward tellurium and that the formation of the dimers 3a and 3b with a central Te-Te linkage is energetically more favorable than the structural isomers with either E-Te or E-E bonds. Compounds 2a, 2b, 3a, 3b, 4a, 4b, and 4c have been characterized in solution by multinuclear NMR spectroscopy and in the solid state by X-ray crystallography.