Study of the formation and stability of the Pd and Pt metallic nanoparticles on carbon support

Catalysts containing Pd and Pt on a Sibunit carbon support were studied by the temperature-programmed reduction, in situ X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy (XAFS). The reduction of Pd and Pt species in samples 2%Pd/C and 2%Pt/C calcined in an air flow at 370°C was studied. Reduction of the 2%Pd/C sample begins at 50—60 °C and is completed at 250—300°C. Particles of various dispersion are formed during reduction. Long-distance peaks observed in the EXAFS spectra point to the presence of a fraction of relatively large crystallites. The average Pd—Pd coordination number (5) at 200 °C gives evidence that a number of very small Pd nanoparticles, oligomeric clusters, is present. Reduction at T > 200°C results in sintering of a small fraction of the Pd particles. Reduction of Pt in 2%Pt/C sample begins at 120—150 °C and is completed at 300—350°C. The sintering-resistant monodispersed Pt particles are formed under these conditions.     

Origin of bulklike structure and bond length disorder of Pt37 and Pt6Ru31 clusters on carbon: comparison of theory and experiment

We describe a theoretical analysis of the structures of self-organizing nanoparticles formed by Pt and Ru-Pt on carbon support. The calculations provide insights into the nature of these metal particle systems-ones of current interest for use as the electrocatalytic materials of direct oxidation fuel cells-and clarify complex behaviors noted in earlier experimental studies. With clusters deposited via metallo-organic Pt or PtRu(5) complexes, previous experiments [Nashner et al. J. Am. Chem. Soc. 1997, 119, 7760; Nashner et al. J. Am. Chem. Soc. 1998, 120, 8093; Frenkel et al. J. Phys. Chem. B 2001, 105, 12689] showed that the Pt and Pt-Ru based clusters are formed with fcc(111)-stacked cuboctahedral geometry and essentially bulklike metal-metal bond lengths, even for the smallest (few atom) nanoparticles for which the average coordination number is much smaller than that in the bulk, and that Pt in bimetallic [PtRu(5)] clusters segregates to the ambient surface of the supported nanoparticles. We explain these observations and characterize the cluster structures and bond length distributions using density functional theory calculations with graphite as a model for the support. The present study reveals the origin of the observed metal-metal bond length disorder, distinctively different for each system, and demonstrates the profound consequences that result from the cluster/carbon-support interactions and their key role in the structure and electronic properties of supported metallic nanoparticles.     

Polymer-mediated synthesis of highly dispersed Pt nanoparticles on carbon black

A new method was developed to prepare highly dispersed Pt nanoparticles on carbon black to use as proton exchange membrane (PEM) fuel cell catalysts. This method involves using a polymer, poly(vinylpyrrolidone) (PVP), to prevent particle aggregation and thereby reduce nanoparticle sizes to achieve high dispersion. It was found that Pt nanoparticles mediated by PVP are smaller than those obtained without PVP and have a narrower size distribution. Well-dispersed Pt nanoparticles with metal loadings from 5 to 35 wt % were obtained on carbon black (Vulcan XC-72R). It was found that well-dispersed Pt nanoparticles on carbon black could be synthesized at a PVP monomers-to-Pt atoms ratio of 0.1 under our experimental conditions. Larger amounts of PVP did not produce smaller nanoparticles, but rather reduced the Pt mass loading on carbon black. The morphology of the Pt nanoparticles that were supported on carbon black was characterized with transmission electron microscopy and X-ray diffraction. Their active surface areas were determined using cyclic voltammetry in a sulfuric acid solution. High Pt dispersion was obtained for the catalysts synthesized with PVP mediation, even at Pt loadings up to 35 wt %. The catalysts prepared with PVP mediation generally showed larger active specific areas than did those prepared without PVP.     

Nitrogen-doped coatings on carbon nanotubes and their stabilizing effect on Pt nanoparticles

A homogeneous coating of nitrogen-doped carbon on carbon nanotubes is performed using ionic liquids. The N-doped material is employed as a support for nanoparticles. Electrochemical degradation behavior is monitored in situ and compared to an unmodified material. The strongly enhanced stability is explained on the basis of a Pt-nitrogen interaction.     

Advantages of immobilization of Pt nanoparticles protected by dendrimers on multiwalled carbon nanotubes

Pt nanoparticles (PtNPs) were synthesized in the presence of a NH(2)-terminated fourth generation poly(amido amine) (PAMAM) dendrimer as a stabilizer at different molar ratios (M:D) of metal precursor to amine terminal group of dendrimer. Subsequently, PtNPs protected by dendrimers (DENPtNPs) were covalently immobilized on multiwalled carbon nanotubes (MWCNTs) by using a condensing agent for amide bond formation between acid-treated MWCNTs and DENPtNPs and the product CNT/DENPtNPs were characterized. PtNPs on MWCNTs increased quantitatively in content with M:D and dispersed with same aspect as the dispersion of DENPtNPs in water: PtNPs homogeneously dispersed at low M:D ratio and slightly aggregated at high ratio. The decomposition of CNT/DENPtNPs occurred at the lower temperature owing to the catalytic effect of PtNPs. A near-infrared absorption band around 2083 nm, which is extremely weak for MWCNTs, was intensified and D, D' and G Raman bands were slightly downshifted when DENPtNPs were attached. These phenomena can be attributed to the electron transfer from DENPtNPs to MWCNTs. Remarkable advantage is apparent from the enhanced electrochemical behavior of CNT/DENPtNPs loaded on gold electrode. PtNPs promoted the electron transfer of MWCNTs and dendrimers contributed to uptake of redox materials.     

Electrochemical impedance analysis of methanol oxidation on carbon nanotube-supported Pt and Pt-Ru nanoparticles

Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are employed to investigate methanol oxidation reactions on single-walled carbon nanotube-supported platinum (Pt) and platinum–ruthenium (Pt-Ru) nanoparticles. EIS and CV measurements show consistent results: Pt catalyst supported on single-walled carbon nanotubes possesses higher catalytic activity for methanol oxidation than that on carbon black. Additionally, semicircles in the second quadrant of the Nyquist diagrams are observed for methanol oxidation on all types of catalytic nanoparticles when applying an electrical potential of 600 mV, which indicates the occurrence of negative resistance during electrocatalytic methanol oxidations. However, all impedance spectra show positive resistance at other electrode potentials (e.g., 300, 400, and 800 mV). Electrocatalytic characteristics of all catalysts are further analyzed by equivalent circuit simulations. We propose that intermediate coverage on the catalyst surface and subsequently the oscillation of nonlinear electrochemical methanol oxidations lead to the occurrence of negative resistance at 600 mV.     

Tuning the electrocatalytic activity of Pt nanoparticles on carbon nanotubes via surface functionalization

Polyelectrolytes with various characteristic functional groups as interlinkers to anchor Pt nanoparticles were used to functionalize carbon nanotubes (CNTs) as Pt electrocatalyst support. It was found that polyanions (poly(styrenesulfonic acid) (PSS), and poly(acrylic acid sodium) (PAA)) have a beneficial effect on methanol electrooxidation on Pt nanoparticles supported on carbon nanotubes via modifying their electronic structure through charge transfer from polyanions to Pt sites and supply of oxygen-containing species. The increased electron density around Pt sites by the charge transfer from polyanions would cause partial filling of Pt 5d-bands, resulting in the downshift of d-band center and weaker chemisorption with oxygen-containing species (e.g. CO_ad). The weakened chemisorption of CO on Pt nanoparticles would promote the methanol electrooxidation. On the contrary, polycations would have an opposite effect on the electronic structure and chemisorption properties of Pt nanoparticles.     

Electrochemical characters and structure changes of electrochemically treated Pt nanoparticles

In this paper, the surface and electrochemical characters of the Pt/CNT electrode before and after voltammetric cyclings were studied using high resolution transmission electron microscopy imaging (HRTEM), X-ray photon electron spectroscopy (XPS) and cyclic voltammetry measurements of CO and methanol oxidation. It was found that Pt nanoparticles were not stable and formed the linked and agglomerated structures. The changes of the crystallites led to the peak multiplicity, the negative shift of CO oxidation peaks, and the increase of the current density of methanol oxidation. We considered the specific activities were due to the increases of oxygen species and defect sites on Pt.     

Sputtering deposition of Pt nanoparticles on vertically aligned multiwalled carbon nanotubes for sensing L-cysteine

A highly sensitive electrochemical sensor for determination of L-cysteine (CySH) is presented. It is based on vertically aligned multiwalled carbon nanotubes modified with Pt nanoparticles by magnetron sputtering deposition. The morphology of the nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy and energy-dispersive. The electrochemistry of CySH was investigated by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The mechanism for the electrochemical reaction of CySH at the modified electrode at different pH values is discussed. The electrode exhibits a higher electrocatalytic activity towards the oxidation of CySH than comparable other electrodes. It displays a linear dependence (R ²?=?0.9980) on the concentration of CySH in the range between 1 and 500 μM and at an applied potential of +0.45 V, a remarkably low detection limit of 0.5 μM (S/N?=?3), and an outstandingly high sensitivity of 1.42?×?10³ μA?mM^?1?cm^?2, which is the highest value ever reported. The electrode also is highly inert towards other amino acids, creatinine and urea. The sensor was applied to the determination of CySH in urine with satisfactory recovery, thus demonstrating its potential for practical applications.

Electrocatalytic oxidation of ethylene glycol on Pt and Pt-Ru nanoparticles modified multi-walled carbon nanotubes

The synthesis and characterization of catalysts based on nanomaterials, supported on multi-walled carbon nanotubes (CNT) for ethylene glycol (EG) oxidation is investigated. Platinum (Pt) and platinum-ruthenium (Pt-Ru) nanoparticles are deposited on surface-oxidized multi-walled carbon nanotubes [Pt/CNT; Pt-Ru/CNT] by the aqueous solution reduction of the corresponding metal salts with glycerol. The electrocatalytic properties of the modified electrodes for oxidation of ethylene glycol in acidic solution have been studied by cyclic voltammetry (CV), and excellent activity is observed. This may be attributed to the small particle size of the metal nanoparticles, the efficacy of carbon nanotubes acting as good catalyst support and uniform dispersion of nanoparticles on CNT surfaces. The nature of the resulting nanoparticles decorated multiwalled carbon nanotubes are characterized by scanning electron microscopy (SEM) and transmission electron microscopic (TEM) analysis. The cyclic voltammetry response indicates that Pt-Ru/CNT catalyst displays a higher performance than Pt/CNT, which may be due to the efficiency of the nature of Ru species in Pt-Ru systems. The fabricated Pt and Pt-Ru nanoparticles decorated CNT electrodes shows better catalytic performance towards ethylene glycol oxidation than the corresponding nanoparticles decorated carbon electrodes, demonstrating that it is more promising for use in fuel cells.     

High-loading Pt nanoparticles on mesoporous carbon with large mesopores for highly active methanol electro-oxidation

High metal-loading Pt/C electrocatalysts are important for the fabrication of thin-layered membrane electrode assemblies (MEAs). However, the preparation of high-loading Pt catalysts with a narrow size distribution of nanoparticles remains a challenge. Herein, ordered mesoporous carbon (OMC) with large mesopores (~15 nm) and a high surface area (1316.0 m² g^?1) was fabricated using a SiO₂ nanosphere array as a template. This material was developed to support a high loading of Pt nanoparticles (60 wt%) and was then used as an electrocatalyst for the methanol oxidation reaction (MOR). The prepared Pt/OMC contains Pt nanoparticles with an average size of ~1.9 nm that are uniformly dispersed on the mesoporous walls of the OMC. The Pt/OMC catalyst exhibits smaller Pt nanoparticle size, greater Pt dispersion, larger specific electrochemically active surface area (ECSA), and higher electrocatalytic activity for the MOR than the carbon black (Vulcan XC-72R)-supported Pt and the commercial Pt/C catalysts.     

Study of the nonenzymatic glucose sensor based on highly dispersed Pt nanoparticles supported on carbon nanotubes

An amperometric biosensor for sensitive and selective detection of glucose has been constructed by using highly dispersed Pt nanoparticles supported on carbon nanotubes (Pt-MWCNTs) as sensing interface. The Pt-MWCNTs were synthesized by using the two-step pyrolysis method. This composite shows good electrocatalytic activity towards the oxidation of glucose in alkaline and thus can be used to selectively detect glucose. We found that detection potential and Nafion amount covered on the Pt-MWCNTs modified glassy carbon electrode had considerable influence on the selectivity for amperometric detection of glucose. Under optimal detection conditions (detection potential of 0.0 V versus SCE and 10 μL 1.5% Nafion), selective detection of glucose in the glucose concentration range of 1.0-26.5 mM (correlation coefficient, >0.999) can be performed. The results demonstrate that the Pt-MWCNTs composite is promising for the fabrication of nonenzymatic glucose sensors.     

High loading Pt nanoparticles on ordered mesoporous carbon sphere arrays for highly active methanol electro-oxidation

Three-dimensionally (3D) ordered mesoporous carbon sphere arrays (OMCS) are explored to support high loading (60 wt%) Pt nanoparticles as electrocatalysts for the methanol oxidation reaction (MOR). The OMCS has a unique hierarchical nanostructure with ordered large mesopores and macropores that can facilitate high dispersion of the Pt nanoparticles and fast mass transport during the reactions. The prepared Pt/OMCS exhibits uniformly dispersed Pt nanoparticles with an average size of 2.0 nm on the mesoporous walls of the carbon spheres. The Pt/OMCS catalyst shows significantly enhanced specific electrochemically active surface area (ECSA) (73.5 m² g^-1) and electrocatalytic activity (0.69 mA cm^-2) for the MOR compared with the commercial 60 wt% Pt/C catalyst.     

Platinum nanoparticles on carbon nanomaterials with graphene structure as hydrogenation catalysts

Carbon nanomaterials with graphene structure (single- and multiwall nanotubes and nanofibers) after oxidizing by a mixture of sulfuric and nitric acids and presumable introducing of carboxyl groups can be used as carrying agents of hydrogenation catalysts. Platinum in a concentration which should not exceed 10 wt % can be fixed using H₂PtCl₆ as a precursor in presence of an organic base. Catalysts based on these nanomaterials with the average size of platinum particles 6–8 nm exceed in activity the Pt/C catalyst with the size of platinum particles 65–70 nm, but are inferior to catalysts based on fullerene black with the average size of platinum particles 3–4 nm.     

Electrocatalytic O2 reduction at glassy carbon electrodes modified with dendrimer-encapsulated Pt nanoparticles

Platinum dendrimer-encapsulated nanoparticles (DENs) were prepared within fourth-generation, hydroxyl-terminated, poly(amidoamine) dendrimers and immobilized on glassy carbon electrodes using an electrochemical coupling strategy. X-ray photoelectron spectroscopy, electron microscopy, and electrochemical experiments confirmed that the Pt DENs were about 1.4 nm in diameter and that they remained within the dendrimer following surface immobilization. The resulting Pt DEN films were electrocatalytically active for the oxygen reduction reaction. The films were also robust, surviving up to 50 consecutive cyclic voltammograms and sonication.     

Nitrite reduction on morphologically controlled Pt nanoparticles

On the surface of morphologically controlled Pt nanoparticles, statistically rich in [100] crystalline facet, nitrite ions were reduced by H2 to N2 with high selectivity.     

The electro-oxidation of carbon monoxide and ethanol on supported Pt nanoparticles: the influence of the support and catalyst microstructure

The sluggish kinetics of ethanol oxidation on Pt-based electrodes is one of the major drawbacks to its use as a liquid fuel in direct ethanol fuel cells, and considerable efforts have been made to improve the reaction kinetics. Herein, we report an investigation on the effect of the Pt microstructure (well-dispersed versus agglomerated nanoparticles) and the catalyst support (carbon Vulcan, SnO₂, and RuO₂) on the rate of the electrochemical oxidation of ethanol and its major adsorbed intermediate, namely, carbon monoxide. By using several structural characterization techniques such as X-ray diffraction, X-ray absorption spectroscopy, and transmission electron microscopy, along with potentiodynamic and potentiostatic electrochemical experiments, we show that by altering both the Pt microstructure and the support, the rate of the electrochemical oxidation of ethanol can be improved up to a factor of 12 times compared to well-dispersed carbon-supported Pt nanoparticles. As a result of a combined effect, the interaction of Pt agglomerates with SnO₂ yielded the highest current densities among all materials studied. The differences in the activity are discussed in terms of structural and electronic properties as well as by mass transport effects, providing valuable insights to the development of more active materials.     

Electrochemical study of nitrobenzene reduction using novel Pt nanoparticles/macroporous carbon hybrid nanocomposites

Novel Pt nanoparticles (PN) ensemble on macroporous carbon (MPC) hybrid nanocomposites (PNMPC) were prepared through a rapidly and simple one-step microwave-assisted heating procedure. The obtained PNMPC was characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and electrochemical methods. The electrochemical reduction of nitrobenzene (NB) was thoroughly investigated at the PNMPC modified glassy carbon (GC) electrode, and the catalytic rate constant was calculated to be 3.14 × 10⁴ M⁻¹ s⁻¹ for NB. A sensitive NB sensor was developed based on the PNMPC/GC electrode, which showed a wide linear range (1–200 μM), low detection limit (50 nM), high sensitivity (6.93 μA μM⁻¹), excellent anti-interference ability and good stability. And moreover, the electrode was successfully applied to the determination of NB in real samples.     

Pt and Pt–Ru nanoparticles decorated polypyrrole/multiwalled carbon nanotubes and their catalytic activity towards methanol oxidation

Conducting polymer composite films comprised of polypyrrole (PPy) and multiwalled carbon nanotubes (MWCNTs) [PPy–CNT] were synthesized by in situ polymerization of pyrrole on carbon nanotubes in 0.1 M HCl containing (NH₄)S₂O₈ as oxidizing agent over a temperature range of 0–5 °C. Pt nanoparticles are deposited on PPy–CNT composite films by chemical reduction of H₂PtCl₆ using HCHO as reducing agent at pH = 11 [Pt/PPy–CNT]. The presence of MWCNTs leads to higher activity, which might be due to the increase of electrochemically accessible surface areas, electronic conductivity and easier charge-transfer at polymer/electrolyte interfaces allowing higher dispersion and utilization of the deposited Pt nanoparticles. A comparative investigation was carried out using Pt–Ru nanoparticles decorated PPy–CNT composites. Cyclic voltammetry demonstrated that the synthesized Pt–Ru/PPy–CNT catalysts exhibited higher catalytic activity for methanol oxidation than Pt/PPy–CNT catalyst. Such kinds of Pt and Pt–Ru particles deposited on PPy–CNT composite polymer films exhibit excellent catalytic activity and stability towards methanol oxidation, which indicates that the composite films is more promising support material for fuel cell applications.