Two‐dimensional shallow water equations by composite schemes

Composite schemes are formed by global composition of several Lax–Wendroff steps followed by a diffusive Lax–Friedrichs or WENO step, which filters out the oscillations around shocks typical for the Lax–Wendroff scheme. These schemes are applied to the shallow water equations in two dimensions. The Lax–Friedrichs composite is also formulated for a trapezoidal mesh, which is necessary in several example problems. The suitability of the composite schemes for the shallow water equations is demonstrated on several examples, including the circular dam break problem, the shock focusing problem and supercritical channel flow problems. Copyright © 1999 John Wiley & Sons, Ltd.     

Compact high‐resolution algorithms for time‐dependent advection on unstructured grids

A technique for constructing monotone, high resolution, multi‐dimensional upwind fluctuation distribution schemes for the scalar advection equation is presented. The method combines the second‐order Lax–Wendroff scheme with the upwind positive streamwise invariant (PSI) scheme via a fluctuation redistribution step, which ensures monotonicity (and which is a generalization of the flux‐corrected transport approach for fluctuation distribution schemes). Furthermore, the concept of a distribution point is introduced, which, when related to the equivalent equation for the scheme, leads to a ‘preferred direction’ for the limiting procedure, and hence to a new distribution of the fluctuation, which retains second‐order accuracy from the Lax–Wendroff scheme, even when the solution contains turning points. Experimental comparisons show that the new method compares favourably in terms of speed, accuracy and robustness with other, similar, techniques. Copyright © 2000 John Wiley & Sons, Ltd.     

Preserving bounded and conservative solutions of transport in one‐dimensional shallow‐water flow with upwind numerical schemes: Application to fertigation and solute transport in rivers

This work intends to show that conservative upwind schemes based on a separate discretization of the scalar solute transport from the shallow‐water equations are unable to preserve uniform solute profiles in situations of one‐dimensional unsteady subcritical flow. However, the coupled discretization of the system is proved to lead to the correct solution in first‐order approximations. This work is also devoted to show that, when using a coupled discretization, a careful definition of the flux limiter function in second‐order TVD schemes is required in order to preserve uniform solute profiles. The work shows that, in cases of subcritical irregular flow, the coupled discretization is necessary but nevertheless not sufficient to ensure concentration distributions free from oscillations and a method to avoid these oscillations is proposed. Examples of steady and unsteady flows in test cases, river and irrigation are presented. Copyright © 2007 John Wiley & Sons, Ltd.     

A numerical solution of 3D inviscid rotational flow in turbines and ducts

The numerical solutions of inviscid rotational (Euler) flows were obtained using an explicit hexahedral unstructured cell vertex finite volume method. A second-order-accurate, one-step Lax–Wendroff scheme was used to solve the unsteady governing equations discretized in conservative form. The transonic circular bump, in which the location and the strength of the captured shock are well predicted, was used as the first test case. The nozzle guide vanes of the VKI low-speed turbine facility were used to validate the Euler code in highly 3D environment. Despite the high turning and the secondary flows which develop, close agreements have been obtained with experimental and numerical results associated with these test cases. © 1998 John Wiley & Sons, Ltd.     

求解定常势流正命题的全时-空变分有限元法

非定常流动变分原理的建立使得用有限元法来求解多工况点的设计问题成为可能。本文在刘高联的非定常变分理论的基础上，对定常变分问题进行时间相关有限元求解。但由于可压缩非定常位势流动的控制方程是双曲型的，简单地把时间当作同空间一样的物理维来求解是不可行的。而现有的时-空有限元法极其复杂，增加了计算复杂度，使其很难用于工程设计中。为此，文[2、3]提出了求解一维非定常问题的新型时-空有限元法。本文把该方法推广到二维流动，用它求解二维弯管内的流动和翼型绕流问题。计算结果与用定常方法求得的结果几乎重合，说明该方法可以用于多维时间相关求解。     

The composite finite volume method on unstructured meshes for the two‐dimensional shallow water equations

A composite finite volume method (FVM) is developed on unstructured triangular meshes and tested for the two‐dimensional free‐surface flow equations. The methodology is based on the theory of the remainder effect of finite difference schemes and the property that the numerical dissipation and dispersion of the schemes are compensated by each other in a composite scheme. The composite FVM is formed by global composition of several Lax–Wendroff‐type steps followed by a diffusive Lax–Friedrich‐type step, which filters out the oscillations around shocks typical for the Lax–Wendroff scheme. To test the efficiency and reliability of the present method, five typical problems of discontinuous solutions of two‐dimensional shallow water are solved. The numerical results show that the proposed method, which needs no use of a limiter function, is easy to implement, is accurate, robust and is highly stable. Copyright © 2001 John Wiley & Sons, Ltd.     

Genuinely multidimensional characteristic‐based scheme for incompressible flows

This paper presents a novel multidimensional characteristic‐based (MCB) upwind method for the solution of incompressible Navier–Stokes equations. As opposed to the conventional characteristic‐based (CB) schemes, it is genuinely multidimensional in that the local characteristic paths, along which information is propagated, are used. For the first time, the multidimensional characteristic structure of incompressible flows modified by artificial compressibility is extracted and used to construct an inherent multidimensional upwind scheme. The new proposed MCB scheme in conjunction with the finite‐volume discretization is employed to model the convective fluxes. Using this formulation, the steady two‐dimensional incompressible flow in a lid‐driven cavity is solved for a wide range of Reynolds numbers. It was found that the new proposed scheme presents more accurate results than the conventional CB scheme in both their first‐ and second‐order counterparts in the case of cavity flow. Also, results obtained with second‐order MCB scheme in some cases are more accurate than the central scheme that in turn provides exact second‐order discretization in this grid. With this inherent upwinding technique for evaluating convective fluxes at cell interfaces, no artificial viscosity is required even at high Reynolds numbers. Another remarkable advantage of MCB scheme lies in its faster convergence rate with respect to the CB scheme that is found to exhibit substantial delays in convergence reported in the literature. The results obtained using new proposed scheme are in good agreement with the standard benchmark solutions in the literature. Copyright © 2007 John Wiley & Sons, Ltd.     

A new fully coupled solution of the Navier-Stokes equations

A fully coupled method for the solution of incompressible Navier-Stokes equations is investigated here. It uses a fully implicit time discretization of momentum equations, the standard linearization of convective terms, a cell-centred colocated grid approach and a block-nanodiagonal structure of the matrix of nodal unknowns. The Method is specific in the interpolation used for the flux reconstruction problem, in the basis iterative method for the fully coupled system and in the acceleration means that control the global efficiency of the procedure. The performance of the method is discussed using lid-driven cavity problems, both for two and three-dimensional geometries, for steady and unsteady flows.     

Comparative Study of Flux-limiters Based on MUST Differencing Scheme

A comparative study of a number of flux-limiters based on MUST methodology is presented in this paper to find the most suitable flux-limiter to be used in unsteady and steady convective flow calculations. The accuracy and convergence behaviour of these flux-limiters are assessed in five pure convection problems: (1) rotation of a cone-shaped scalar field, (2) advection of a square-shaped scalar field, (3) mixing of a hot with a cold front, (4) deformation of cone-shaped scalar field and (5) IAHR. The superbee flux-limiter results in the most accurate solutions in unsteady flow problems, and the Koren flux-limiter is the more appropriate in steady flow problems because of its good convergence behaviour.     

Improving simple explicit methods for unsteady open channel and river flow

A rigorous study of the explicit Lax–Friedrichs scheme for its application to one‐dimensional shallow water flows is presented. The deficiencies of this method are identified and the way to overcome them are presented. It is compared to the explicit first order upwind scheme and to the explicit second order Lax–Wendroff scheme by means of the simulation of several test cases with exact solution. All three schemes in their best balanced version are applied to the simulation of a real river flood wave leading to very satisfactory results. Copyright © 2004 John Wiley & Sons, Ltd.     

ANALYSIS AND IMPLEMENTATION OF THE GAS-KINETIC BGK SCHEME FOR COMPUTATIONAL GAS DYNAMICS

Gas-kinetic schemes based on the BGK model are proposed as an alternative evolution model which can cure some of the limitations of current Riemann solvers. To analyse the schemes, simple advection equations are reconstructed and solved using the gas-kinetic BGK model. Results for gas-dynamic application are also presented. The final flux function derived in this model is a combination of a gas-kinetic Lax– Wendroff flux of viscous advection equations and kinetic flux vector splitting. These two basic schemes are coupled through a non-linear gas evolution process and it is found that this process always satisfies the entropy condition. Within the framework of the LED (local extremum diminishing) principle that local maxima should not increase and local minima should not decrease in interpolating physical quantities, several standard limiters are adopted to obtain initial interpolations so as to get higher-order BGK schemes. Comparisons for well-known test cases indicate that the gas-kinetic BGK scheme is a promising approach in the design of numerical schemes for hyperbolic conservation laws. © 1997 by John Wiley & Sons, Ltd.     

CH4-O2 混合气中爆燃爆震转捩的数值模拟

运用化学流体力学基本理论和两步燃烧反应模型原理，建立了一维封闭体系可燃气爆燃爆震转变现象的数学模型，利用拉格朗日质量坐标变换下的Ｌａｘ－Ｗｅｎｄｒｏｆ和Ｍｅｃｏｒｍｉｃ气动差分与Ａｄａｍｓ化学差分格式，求解基本方程，成功地完成了过程的数值模拟，清楚地说明了可燃气中ＤＤＴ现象由压缩波到激波达到稳态爆震的发生机制和火焰带引生爆震波的过程行为。     

Development of an Artificial Compressibility Methodology with Implicit LU-SGS Method

A numerical method has been developed to solve the steady and unsteady incompressible Navier-Stokes equations in a two-dimensional, curvilinear coordinate system. The solution procedure is based on the method of artificial compressibility and uses a third-order flux-difference splitting upwind differencing scheme for convective terms and second-order center difference for viscous terms. A time-accurate scheme for unsteady incompressible flows is achieved by using an implicit real time discretization and a dual-time approach, which introduces pseudo-unsteady terms into both the mass conservation equation and momentum equations. An efficient fully implicit algorithm LU-SGS, which was originally derived for the compressible Eulur and Navier-Stokes equations by Jameson and Toon [1], is developed for the pseudo-compressibility formulation of the two dimensional incompressible Navier-Stokes equations for both steady and unsteady flows. A variety of computed results are presented to validate the present scheme. Numerical solutions for steady flow in a square lid-driven cavity and over a backward facing step and for unsteady flow in a square driven cavity with an oscillating lid and in a circular tube with a smooth expansion are respectively presented and compared with experimental data or other numerical results.     

An implicit meshless method for application in computational fluid dynamics

An implicit meshless scheme is developed for solving the Euler equations, as well as the laminar and Reynolds‐averaged Navier–Stokes equations. Spatial derivatives are approximated using a least squares method on clouds of points. The system of equations is linearised, and solved implicitly using approximate, analytical Jacobian matrices and a preconditioned Krylov subspace iterative method. The details of the spatial discretisation, linear solver and construction of the Jacobian matrix are discussed; and results that demonstrate the performance of the scheme are presented for steady and unsteady two dimensional fluid flows. Copyright © 2012 John Wiley & Sons, Ltd.     

Spatial Simple Waves on a Shear Flow

The paper studies simple waves of the shallowwater equations describing threedimensional wave motions of a rotational liquid in a freeboundary layer. Simple wave equations are derived for the general case. The existence of unsteady or steady simple waves adjacent continuously to a given steady shear flow along a characteristic surface is proved. Exact solutions of the equations describing steady simple waves were found. These solutions can be treated as extension of Prandtl–Mayer waves for sheared flows. For shearless flows, a general solution of the system of equations describing unsteady spatial simple waves was found.     

Computation of unsteady transonic flow over a fighter wing using a zonal Navier–Stokes/full‐potential method

An improved hybrid method for computing unsteady compressible viscous flows is presented. This method divides the computational domain into two zones. In the inner zone, the Navier–Stokes equations are solved using a diagonal form of an alternating‐direction implicit (ADI) approximate factorisation procedure. In the outer zone, the unsteady full‐potential equation (FPE) is solved. The two zones are tightly coupled so that steady and unsteady flows may be efficiently solved. Characteristic‐based viscous/inviscid interface boundary conditions are employed to avoid spurious reflections at that interface. The resulting CPU times are about 60% of the full Navier–Stokes CPU times for unsteady flows in non‐vector processing machines. Applications of the method are presented for a F‐5 wing in steady and unsteady transonic flows. Steady surface pressures are in very good agreement with experimental data and are essentially identical to the full Navier–Stokes predictions. Density contours show that shocks cross the viscous/inviscid interface smoothly, so that the accuracy of full Navier–Stokes equations can be retained with significant savings in computational time. Copyright © 1999 John Wiley & Sons, Ltd.     

Efficient computation of unsteady vortical flow using flow-adaptive time-dependent grids

The objective of this study is to efficiently simulate vortex-dominated highly unsteady flows. In such flows, the locations as well as the extent of the regions requiring fine-mesh resolution vary with time. A technique has been developed to simulate these flows on a temporally adapting grid in which the adaption is based on the evolving flow solution. The flow in an axisymmetric constriction has been selected as an illustrative problem. The multiple and disparate length scales inherent in this complex flow make this problem ideally suited for evaluating the adaptive-grid technique. Adaption is based on the equidistribution of a weight function, through the use of forcing functions. The significance of this is that the method can be implemented into existing flow-analysis systems with minimal changes. The grid-generation equations developed are viewed as grid-transport equations. The time-dependent control functions perform the role of the convective speed in this transport mechanism. The equations provide the efficiency and flow tracking capability of parabolic equations, while maintaining the smoothness of computationally expensive elliptic equations. The efficiency and flow tracking capability of the approach is demonstrated for both steady and unsteady flows.     

Study of a staggered fourth‐order compact scheme for unsteady incompressible viscous flows

The objective of this paper is the development and assessment of a fourth‐order compact scheme for unsteady incompressible viscous flows. A brief review of the main developments of compact and high‐order schemes for incompressible flows is given. A numerical method is then presented for the simulation of unsteady incompressible flows based on fourth‐order compact discretization with physical boundary conditions implemented directly into the scheme. The equations are discretized on a staggered Cartesian non‐uniform grid and preserve a form of kinetic energy in the inviscid limit when a skew‐symmetric form of the convective terms is used. The accuracy and efficiency of the method are demonstrated in several inviscid and viscous flow problems. Results obtained with different combinations of second‐ and fourth‐order spatial discretizations and together with either the skew‐symmetric or divergence form of the convective term are compared. The performance of these schemes is further demonstrated by two challenging flow problems, linear instability in plane channel flow and a two‐dimensional dipole–wall interaction. Results show that the compact scheme is efficient and that the divergence and skew‐symmetric forms of the convective terms produce very similar results. In some but not all cases, a gain in accuracy and computational time is obtained with a high‐order discretization of only the convective and diffusive terms. Finally, the benefits of compact schemes with respect to second‐order schemes is discussed in the case of the fully developed turbulent channel flow. Copyright © 2008 John Wiley & Sons, Ltd.     

Implicit application of non‐reflective boundary conditions for Navier–Stokes equations in generalized coordinates

The non‐reflective boundary conditions (NRBC) for Navier–Stokes equations originally suggested by Poinsot and Lele (J. Comput. Phys. 1992; 101 :104–129) in Cartesian coordinates are extended to generalized coordinates. The characteristic form Navier–Stokes equations in conservative variables are given. In this characteristic‐based method, the NRBC is implicitly coupled with the Navier–Stokes flow solver and are solved simultaneously with the flow solver. The calculations are conducted for a subsonic vortex propagating flow and the steady and unsteady transonic inlet‐diffuser flows. The results indicate that the present method is accurate and robust, and the NRBC are essential for unsteady flow calculations. Copyright © 2005 John Wiley & Sons, Ltd.     

An ‘assumed deviatoric stress-pressure-velocity’ mixed finite element method for unsteady,convective, incompressible viscous flow: Part II: Computational studies

In Part I of this paper we presented a mixed finite element method, for solving unsteady, incompressible, convective flows, based on assumed ‘deviatoric stress–velocity–pressure’ fields in each element, which have the features: (i) the convective term is treated by the usual Galerkin technique; (ii) the unknowns in the global system of finite element equations are the nodal velocities, and the ‘constant term’ in the arbitrary pressure field over each element; and (iii) exact integrations are performed over each element. In this paper we present numerical studies, both for steady as well as unsteady cases, of the problems: (a) the driven cavity, (b) Jeffry–Hamel flow in a channel, (c) flow over a ‘backward’ or ‘downstream’ facing step, and (d) flow over a square step. All these problems are two-dimensional in nature, although certain 3-D solutions are to be presented in a separate paper. The present results are compared with those which are available in the literature and are based on alternative approaches to treat incompressibility and convective acceleration. The possible merits of the present method are thus pointed out.