Kinetic study of the Ce(III)‐, Mn(II)‐, or ferroin‐catalyzed Belousov‐Zhabotinsky reaction with pyruvic acid

The Ce(III)‐, Mn(II)‐, or ferroin (Fe(phen)₃²⁺)‐catalyzed reaction of bromate ion and pyruvic acid (PA) or its dimer exhibits oscillatory behavior. Both the open‐chain dimer (parapyruvic acid, γ‐methyl‐γ‐hydroxyl‐α‐keto‐glutaric acid, DPA1) and the cyclic‐form dimer (α‐keto‐γ‐valerolactone‐γ‐carboxylic acid, DPA2) show more sustained oscillations than PA monomer. Ferroin behaves differently from Ce(III) or Mn(II) ion in catalyzing these oscillating systems. The kinetics of reactions of PA, 3‐brompyruvic acid (BrPA), DPA1, or DPA2 with Ce(IV), Mn(III), Fe(phen)₃³⁺ ion were investigated. The order of relative reactivity of pyruvic acids toward reaction with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is DPA2 > DPA1 > BrPA > PA and that of metal ions toward reaction with pyruvic acids is Mn(III) > Ce(IV) > Fe(phen)₃³⁺. The rates of bromination reactions of pyruvic acids are independent of the concentration of bromine and the order of reactivity toward bromination is (DPA1, DPA2) > BrPA > PA. Experimental results are rationalized. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 408–418, 2000     

Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov–Zhabotinsky reaction with ethyl hydrogen malonate

In a stirred batch reaction, Fe(phen)₃²⁺ ion behaves differently from Ce(III) or Mn(II) ion in catalyzing the bromate‐driven oscillating reaction with ethyl hydrogen malonate [CH₂COOHCOOEt, ethyl hydrogen malonate (EHM)]. The effects of N₂ atmosphere, concentrations of bromate ion, EHM, metal ion catalyst, sulfuric acid, and additive (bromide ion or bromomalonic acid) on the pattern of oscillations were investigated. The kinetic study of the reaction of EHM with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion indicates that under aerobic or anaerobic conditions the order of reactivity toward reacting with EHM is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺, which follows the same trend as that of the malonic acid system. The presence of the ester group in EHM lowers the reactivity of the two methylene hydrogen atoms toward bromination or oxidation by Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion. No good oscillations were observed for the BrO₃₋‐CH₂(COOEt)₂ reaction catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion. A discussion of the effects of oxygen on the reactions of malonic acid and its derivatives (RCHCOOHCOOR′) with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is also presented. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 52–61, 2000     

Kinetic Study of the Ce(III)‐, Mn(II)‐, or Ferroin‐Catalyzed Belousov‐Zhabotinsky Reaction with Allylmalonic Acid

In a stirred batch experiment and under aerobic conditions, ferroin (Fe(phen)₃²⁺) behaves differently from Ce(III) or Mn(II) ion as a catalyst for the Belousov‐Zhabotinsky (BZ) reaction with allylmalonic acid (AMA). The effects of bromate ion, AMA, metal‐ion catalyst, and sulfuric acid on the oscillating pattern were investigated. The kinetics of the reaction of AMA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was studied under aerobic or anaerobic conditions. The order of reactivity of metal ions toward reaction with AMA is Fe(phen)₃³⁺ > Mn(III) > Ce(IV) under aerobic conditions whereas it is Mn(III) > Ce(IV) > Fe(phen)₃³⁺ under anaerobic conditions. Under aerobic or anaerobic conditions, the order of reactivity of RCH(CO₂H)₂ (R = H (MA), Me (MeMA), Et (EtMA), allyl (AMA), n‐Bu (BuMA), Ph (PhMA), and Br (BrMA)) is PhMA > MA > BrMA > AMA > MeMA > EtMA > BuMA toward reaction with Ce(IV) ion and it is MA > PhMA > BrMA > MeMA > AMA > EtMA > BuMA toward reaction with Mn(III) ion. Under aerobic conditions, the order of reactivity of RCH(CO₂H)₂ toward reaction with Fe(phen)₃³⁺ ion is PhMA > BrMA > (MeMA, AMA) > (BuMA, EtMA) > MA. The experiment results are rationalized.     

Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov‐Zhabotinsky reaction with 2‐ketoglutaric acid

The Belousov‐Zhabotinsky (BZ) reaction of bromate ion with 2‐ketoglutaric acid (KGA) in aqueous sulfuric acid catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion exhibits sustained barely damped oscillations under aerobic conditions. In general, the reaction oscillates without an induction period. Fe(phen)₃²⁺ ion behaves differently from Ce(III) and Mn(II) ions in catalyzing this oscillating system. The gem‐diol form of KGA exhibits different behavior from that of the keto form of KGA in the BZ reaction. The kinetics and mechanism of the reaction of KGA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was investigated. The order of relative reactivities of metal ions toward reaction with KGA is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺. Experimental results are rationalized. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 101–107, 2001     

Kinetics of Oxidation of Diphenylmethane and Derivatives with Ce(IV) in Aqueous Acidic Acetonitrile

In aqueous acidic acetonitrilc solution cerium(IV) oxidizes diphenylmethane (Ph₂CH₂) to produce diphenylmethanol (Ph₂CHOH) first and then benzophenone (Ph₂CO). With the organic reductant in great excess, both the Ce(IV)-Ph₂CH₂ and Ce(IV)-Ph₂CHOH rcactions follow second-order kinetics. The rates of both reactions increase nonlinearly with increasing [H⁺] or with decreasing [H₂O]. Both kinetic and spectrophotometrc results indicate that replacement of water molecules by complex formation through the phenyl or hydroxyl group plays an important role in activating the reaction. Under similar conditions, the order of relative reactivities toward Ce(IV) oxidation is PhCH₂OH > CH₃CH₂OH > Ph2CHOH > Ph₂CH₂ > PhCH₃> (Ph₂CO, C₆H₆). Mechanistic interpretations of the kinetic results are presented.     

Headspace gas chromatographic separation of toxic organic impurities from air

Summary To determine toxic organic compounds (methanol, ethanol, n-propanol, acetone, methyl ethyl ketone, methyl isobutyl ketone) in air a method was developed for their headspace gas chromatographic analysis with preconcentration in n-butanol (alcohols) and in n-pentanol (ketones). The distribution coefficients of analytes in the air-absorbent system have been measured: 1051 (MeOH), 5630 (EtOH), 6773 (n-PrOH), 307 (Me₂CO), 580 (MeCOEt), 1035 (MeCOBu-i). The minimum detectable level (mg m⁻³) was determined as low as 0.9 (MeOH), 4.0 (EtOH), 0.9 (n-PrOH), 0.2 (Me₂CO), 0.1 (MeCOEt), 0.4 (MeCOBu-i). The method was effectively used for gas effluent air control in the workplace and in the atmosphere. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Kinetic study of the Ce(III)- or ferroin-catalyzed Belousov-Zhabotinsky reaction with ethyl- or butyl-malonic acid

In a stirred batch experiment, ferroin (Fe(phen)₃²⁺) behaves differently from Ce(III) as a catalyst for the Belousov-Zhabotinsky reaction with ethyl- or n-butyl-malonic acid (EtMA or BuMA) The effects of bromate ion, organic substrate, metal-ion catalyst, and sulfuric acid on the oscillating pattern were investigated. The kinetics of the reactions of methylmalonic acid (MeMA), bromomethyl-malonic acid (BrMeMA), EtMA, bromoethylmalonic acid (BrEtMA), BuMA, bromo(n-butyl)malonic acid (BrBuMA) with Ce(IV) or Fe(phen)₃³⁺ ion were studied. Under aerobic or anaerobic conditions, the order of reactivity toward Ce(IV) oxidation is MeMA > EtMA > BuMA > BrMeMA >> (BrEtMA, BrBuMA). Under aerobic conditions, the order of reactivity toward reacting with Fe(phen)₃³⁺ ion is MeMA > (BuMA, EtMA) >> (BrMeMA, BrEtMA, BrBuMA). The experimental results are rationalized. © 1996 John Wiley & Sons, Inc.     

Thermal studies of some biologically active oxovanadium(IV) complexes containing 8-hydroxyquinolinate and hydroxamate ligands

The thermal decomposition behaviours of oxovanadium(IV)hydroxamate complexes of composition [VO(Q)_2?n(HL^1,2)_n]: [VO(C₉H₆ON)(C₆H₄(OH)(CO)NHO)] (I), [VO(C₆H₄(OH)(CO)NHO)₂] (II), [VO(C₉H₆ON)(C₆H₄(OH)(5-Cl)(CO)NHO)] (III), and [VO(C₆H₄(OH)(5-Cl)(CO)NHO)₂] (IV) (where Q?=?C₉H₆NO^? 8-hydroxyquinolinate ion; HL¹?=?[C₆H₄(OH)CONHO]^? salicylhydroxamate ion; HL²?=?[C₆H₃(OH)(5-Cl)CONHO]^? 5-chlorosalicylhydroxamate ion; n?=?1 and 2), which are synthesised by the reactions of [VO(Q)₂] with predetermined molar ratios of potassium salicylhydroxamate and potassium 5-chlorosalicylhydroxamate in THF?+?MeOH solvent medium, have been studied by TG and DTA techniques. Thermograms indicate that complexes (I) and (III) undergo single-step decomposition, while complexes (II) and (IV) decompose in two steps to yield VO(HL^1,2) as the likely intermediate and VO₂ as the ultimate product of decomposition. The formation of VO₂ has been authenticated by IR and XRD studies. From the initial decomposition temperatures, the order of thermal stabilities for the complexes has been inferred as III?>?I > II?>?IV.     

Two new terpyridine dimanganese complexes: a manganese(III,III) complex with a single unsupported oxo bridge and a manganese(III,IV) complex with a dioxo bridge. Synthesis, structure, and redox properties

Two new terpyridine dimanganese oxo complexes [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(CF(3)CO(2))(2)](+) (3) and [Mn(2)(III,III)(mu-O)(terpy)(2)(CF(3)CO(2))(4)] (4) (terpy = 2,2':6,2' '-terpyridine) have been synthesized and their X-ray structures determined. In contrast to the corresponding mixed-valent aqua complex [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(H(2)O)(2)](3+) (1), the two Mn atoms in 3 are not crystallographically equivalent. The neutral binuclear monooxo manganese(III,III) complex 4 exhibits two crystallographic forms having cis and trans configurations. In the cis complex, the two CF(3)CO(2)(-) ligands on each manganese adopt a cis geometry to each other; one CF(3)CO(2)(-) is trans to the oxygen of the oxo bridge while the second is cis. In the trans complex, the two coordinated CF(3)CO(2)(-) have a trans geometry to each other and are cis to the oxo bridge. The electrochemical behavior of 3 in organic medium (CH(3)CN) shows that this complex could be oxidized into its corresponding stable manganese(IV,IV) species while its reduced form manganese(III,III) is very unstable and leads by a disproportionation process to Mn(II) and Mn(IV) complexes. Complex 4 is only stable in the solid state, and it disproportionates spontaneously in CH(3)CN solution into the mixed-valent complex 3 and the mononuclear complex [Mn(II)(terpy)(2)](2+) (2), thereby preventing the observation of its electrochemical behavior.     

Effect of Mn(II) and Ce(IV) Ions on the Oxidation of Lactic Acid by Chromic Acid

The kinetics and mechanism of lactic acid oxidation in the presence of Mn(II) and Ce(IV) ions by chromic acid were studied spectrophotometrically. The oxidation of lactic acid by Cr(VI) was found to proceed in two measurable steps, both of which gave pyruvic acid as the primary product in the absence of Mn(II). 2Cr(VI)+2CH₃CHOHCOOH → 2CH₃COCOOH+Cr(V)+Cr(III) Cr(V)+CH₃CHOHCOOH → Cr(III)+CH₃COCOOHThe observed kinetics was explained due to the catalytic and inhibitory effects of Mn(II) and Ce(IV) on the lactic acid oxidation by Cr(VI). The reactivity of lactic acid depends upon the experimental conditions. It acts as a two-or three-equivalent reducing agent in the absence or presence of Mn(II). It was examined that Cr(III) products resulting from the direct reduction of Cr(VI) by three-equivalent reducing agents. The oxidation of lactic acid follows the complex order kinetics with respect to [lactic acid]. The activation parameters E_a, ΔH^#, and ΔS^# were calculated and discussed.     

Chemistry of vinylidene complexes: IV. Synthesis and the crystal and molecular structure of (η5-C5H5)MnOs3(μ2-CHCHPh)(μ-H)(μ-CO)(CO)11, an unusual heterometallic cluster

By the reaction of Cp(CO)₂MnCCHPh (I) with H₂Os₃(CO)₁₀ (II) the tetranuclear mixed-metal complex CpMnOs₃(μ₂-CHCHPh)(μ-H)(μ-CO)(CO)₁₁ (III) was prepared. An X-ray study of the structure of III showed that it is a spiked, tetranuclear cluster with the Mn atom linked to one of the vertices of the osmium triangle; the MnOs bond is bridged by CO and CHCHPh groups, the latter being σ-bonded to Os and η²-coordinated by Mn. In the course of the formation of III, hydrogenation and n-π rearrangement of the initial phenylvinylidene ligand take place. In solution, complex III readily eliminates the [CpMn(CO)₂] fragment to give triosmium clusters containing unsaturated organic ligands: HOs₃(μ₂-CHCHPh)(CO)₁₀, H₂Os₃(μ₃-CHCPh)(CO)₉, and H₂Os₃(μ₃-CCHPh)(CO)₉.     

Mechanistic study of cerium(IV) oxidation of antimony(III) in aqueous sulphuric acid in the presence of micro amounts of manganese(II) by stopped flow technique

The oxidation of antimony(III) by cerium(IV) has been studied spectrometrically (stopped flow technique) in aqueous sulphuric acid medium. A minute amount of manganese(II) (10⁻⁵ mol dm⁻³) is sufficient to enhance the slow reaction between antimony(III) and cerium(IV). The stoichiometry is 1:2, i.e. one mole of antimony(III) requires two moles of cerium(IV). The reaction is first order in both cerium(IV) and manganese(II) concentrations. The order with respect to antimony(III) concentration is less than unity (ca 0.3). Increase in sulphuric acid concentration decreases the reaction rate. The added sulphate and bisulphate decreases the rate of reaction. The added products cerium(III) and antimony(V) did not have any significant effect on the reaction rate. The active species of oxidant, substrate and catalyst are Ce(SO₄)₂, [Sb(OH)(HSO₄)]⁺ and [Mn(H₂O)₄]²⁺, respectively. The activation parameters were determined with respect to the slow step. Possible mechanisms are proposed and reaction constants involved have been determined.     

Studies on Mn(II) and Mn(IV) Complexes of an Unsymmetrical Bidentate Donor,N(4-Chlorophenyl)-Pyridine-2-Aldimine (ClL): Crystal Structure of [Mn(ClL)2(NCS)2]

The synthesis, characterisation and X-ray structure of an Mn(II) compound, [Mn(ClL)₂(NCS)₂], is described. Oxidation of the compound by H₂O₂ leads to a mononuclear Mn(IV) compound [Mn(ClL)(ClL')(NCS)₂]ClO₄·2H₂O where one of the ClL ligands is oxidised to the corresponding amide ClL'. Oxidation of [Mn(ClL)₂(NCS)₂] by Ce(IV), however, leads to a binuclear Mn(IV) compound [Mn₂O(ClL')₃(ClL)(H₂O)₂](NCS)₂ClO₄·2MeCN. Electron transfer behaviour of the compounds was investigated by cyclic voltammetry and differential pulse voltammetry.     

Ruthenium (VIII) mediated oxidation of some aliphatic and alicyclic ketones by periodate-ruthenium (III) system in aqueous HClO4 medium

The kinetics of Ruthenium(III) chloride mediated oxidation of acetone, 2-butanone, 4-methyl-2-pentanone, 2-pentanone, cyclopentanone, and cyclohexanone by sodium periodate in aqueous HClO₄ media was zero-order in [IO₄⁻] and first-order in [ketone]. The reaction was independent of added [Ru(III)] and showed first-order dependence on [H⁺] for all the ketones studied, except acetone. In the case of acetone at [H⁺] < 0.05 M, the rate was independent of [H⁺], the order in [Ru(III)] being unity; but at [H⁺] > 0.05 M the reaction showed unit dependence on [H⁺] and the order in [Ru(III)] was zero. Ruthenium(VIII) generated in situ is postulated as the hydride abstracting species. A mechanism involving enolization as the rate determining step is proposed. Acetone at lower acidity of the medium is shown to react directly with Ru(VIII). In the absence of ruthenium(III) chloride, the kinetics were first-order in [IO₄⁻], [ketone], and [H⁺]. Structure-reactivity relationship is discussed and thermodynamic parameters are reported. © 1996 John Wiley & Sons, Inc.     

Insight into the structures of [M(C5H4I)(CO)3] and [M2(C12H8)(CO)6] (M = Mn and Re) containing strong I...O and π(CO)–π(CO) interactions

The compounds tricarbonyl(η⁵‐1‐iodocyclopentadienyl)manganese(I), [Mn(C₅H₄I)(CO)₃], (I), and tricarbonyl(η⁵‐1‐iodocyclopentadienyl)rhenium(I), [Re(C₅H₄I)(CO)₃], (III), are isostructural and isomorphous. The compounds [μ‐1,2(η⁵)‐acetylenedicyclopentadienyl]bis[tricarbonylmanganese(I)] or bis(cymantrenyl)acetylene, [Mn₂(C₁₂H₈)(CO)₆], (II), and [μ‐1,2(η⁵)‐acetylenedicyclopentadienyl]bis[tricarbonylrhenium(I)], [Re₂(C₁₂H₈)(CO)₆], (IV), are isostructural and isomorphous, and their molecules display inversion symmetry about the mid‐point of the ligand C[triple‐bond]C bond, with the (CO)₃M(C₅H₄) (M = Mn and Re) moieties adopting a transoid conformation. The molecules in all four compounds form zigzag chains due to the formation of strong attractive I...O [in (I) and (III)] or π(CO)–π(CO) [in (I) and (IV)] interactions along the crystallographic b axis. The zigzag chains are bound to each other by weak intermolecular C—H...O hydrogen bonds for (I) and (III), while for (II) and (IV) the chains are bound to each other by a combination of weak C—H...O hydrogen bonds and π(Csp²)–π(Csp²) stacking interactions between pairs of molecules. The π(CO)–π(CO) contacts in (II) and (IV) between carbonyl groups of neighboring molecules, forming pairwise interactions in a sheared antiparallel dimer motif, are encountered in only 35% of all carbonyl interactions for transition metal–carbonyl compounds.     

Kinetics and mechanism of the cerium (IV) oxidation of α-Hydroxycycloalkanecarboxylic acids and cyclic alcohols in acidic perchlorate media

The Ce(IV) oxidation of the five-, six-, and seven-membered ring α-hydroxycycloalkanecarboxylic (C5, C6, and C7) acids to the corresponding cyclic ketones has been studied in acidic perchlorate media. The data may be interpreted in terms of a mechanism which involves fast preequilibrium complexation steps between Ce(IV) and the hydroxy acids, yielding two complexes which differ only by a proton. Complexation is followed by rate-determining decarboxylation to an intermediate (free radical?), which reacts quickly with another Ce(IV) to give products. Of the two proposed complexes, the protonated one is virtually unreactive. The C7 ring acid is oxidized more rapidly than the C6 acid, which, in turn, is oxidized faster than the C5 acid. For comparison, the oxidation of the five-, six-, and seven-membered ring cyclic alcohols to the corresponding cyclic ketones by Ce(IV) in acidic perchlorate was also studied. The order of reactivity is cyclopentanol > cycloheptanol > cyclohexanol. The differences in observed reactivities between the hydroxy acids and the cyclic alcohols are explained in terms of differences in transition state structure. The stepwise hydrolysis constants of Ce(IV) leading to Ce(OH)^3Plus; and Ce(OH)₂²⁺ were determined. In the case of the hydroxy acids, evidence is in favor of Ce(OH)³⁺ as the reactive ceric species in aqueous acidic perchlorate media.     

Spectrophotometric determination of copper(II) using oximidobenzotetronic acid

Summary Oximidobenzotetronic acid (OBTA) is proposed as a sensitive spectrophotometric reagent for the estimation of 0.5–3.0 ppm of copper(II) at 427 nm in 50% dioxan at p_H 5.3–7.5. For the estimation of 2 ppm Cu(II), 1.3 ppm Ni(II), 1.3 ppm Co(II), 3.2 ppm Fe(II), 10.3 ppm Fe(III), 9.7 ppm Ce(IV), 300 ppm acetate, 160 ppm oxalate, 95 ppm tartrate, 50 ppm citrate, as well as Zn(II), Cd(II), Hg(II)) Pb(II), Mn(II), As(III) as well as (V), Th(IV), Be(II), Ce(III), La(III), V(V) and Mo(VI), even when present in large quantities, do not interfere. The interference due to 25 ppm Bi(III), 20 ppm Sb(III), 20 ppm Sn(II), 25 ppm Sn(IV) and 30 ppm W(VI) can be removed by the addition of 95 ppm tartrate ions.

---

Zusammenfassung Oximidobenzotetronsäure wurde als empfindliches Reagens zur spektrophotometrischen Bestimmung von 0,5 bis 3,0 ppm Kupfer(II) bei 427 nm in 50%iger Dioxanlösung bei p_H 5,3 bis 7,5 vorgeschlagen. Die Anwesenheit von 1,3 ppm Ni(II), 1,3 ppm Co(II), 3,2 ppm Fe(II), 10,3 ppm Fe(III), 9,7 ppm Ce(IV), 300 ppm Acetat, 160 ppm Oxalat, 95 ppm Tartrat, 50 ppm Citrat sowie die Anwesenheit auch großer Mengen Zn(II), Cd(II), Hg(II), Pb(II), Mn(II), As(III) bzw. (V), Th(IV), Be(II), Ce(III), La(III), V(V) und Mo(VI) stören die Bestimmung von 2 ppm Cu(II) nicht. Der störende Einfluß von 25 ppm Bi(III), 20 ppm Sb(III), 20 ppm Sn(II), 25 ppm Sn(IV) und 30 ppm W(VI) kann durch Zusatz von 95 ppm Tartrat beseitigt werden.

     

Water oxidation catalyzed by the tetranuclear Mn complex [Mn(IV)4O5(terpy)4(H2O)2](ClO4)6

The tetranuclear manganese complex [Mn(IV)(4)O(5)(terpy)(4)(H(2)O)(2)](ClO(4))(6) (1; terpy = 2,2':6',2″-terpyridine) gives catalytic water oxidation in aqueous solution, as determined by electrochemistry and GC-MS. Complex 1 also exhibits catalytic water oxidation when adsorbed on kaolin clay, with Ce(IV) as the primary oxidant. The redox intermediates of complex 1 adsorbed on kaolin clay upon addition of Ce(IV) have been characterized by using diffuse reflectance UV/visible and EPR spectroscopy. One of the products in the reaction on kaolin clay is Mn(III), as determined by parallel-mode EPR spectroscopic studies. When 1 is oxidized in aqueous solution with Ce(IV), the reaction intermediates are unstable and decompose to form Mn(II), detected by EPR spectroscopy, and MnO(2). DFT calculations show that the oxygen in the mono-μ-oxo bridge, rather than Mn(IV), is oxidized after an electron is removed from the Mn(IV,IV,IV,IV) tetramer. On the basis of the calculations, the formation of O(2) is proposed to occur by reaction of water with an electrophilic manganese-bound oxyl radical species, (?)O-Mn(2)(IV/IV), produced during the oxidation of the tetramer. This study demonstrates that [Mn(IV)(4)O(5)(terpy)(4)(H(2)O)(2)](ClO(4))(6) may be relevant for understanding the role of the Mn tetramer in photosystem II.     

Electrochemical Behavior of Ce(IV)/Ce(III) Couple in N,N-Di(2-ethylhexyl)-n-butanamide (DEHBA), N,N-Di(2-ethylhexyl)-iso-butanamide (DEHiBA), and N,N-Di(2-ethylhexyl)-3,3-dimethyl Butanamide (DEHDMBA)

In this work we report on the electrochemical behavior of Ce(IV)/Ce(III) redox couple in pure N,N-dialkyl amides (N,N-DA), namely N,N-di(2-ethylhexyl)-n-butanamide (DEHBA), N,N-di(2-ethylhexyl)-iso-butanamide (DEHiBA), and N,N-di(2-ethylhexyl)-3,3-dimethyl butanamide (DEHDMBA) equilibrated with nitric aqueous solutions as an entry to the direct electrochemical characterization of plutonium in these extractants. Ce(IV)/Ce(III) redox process was used as a model. Its potential (E_1/2≅1.02 V/SCE) is not affected by the temperature and the nature of the N,N-DA and this clearly indicates that the functionalities of these extractants produce the same relative effect on both +IV and +III oxidation states of the cerium cation. Linear variations of the current intensity of the reduction peak of Ce(IV) with the concentration of Ce(IV)/N,N-DAs/HNO₃(5 M) solutions were obtained from cyclic voltammograms recorded at 25 °C and 40 °C. Due to the poor definition of the voltammograms in DEHiBA and DEHDMBA, such characterization allows only the evaluation of the performances of the chemical extraction of Ce(IV) from aqueous nitric acid solution by the undiluted DEHBA. To our knowledge, the electrochemical behavior of Ce(IV)/Ce(III) in N,N-DAs was not previously studied and our findings will for sure open the door for further investigations in this field.     

Laser flash photolysis generation and kinetic studies of porphyrin-manganese-oxo intermediates. Rate constants for oxidations effected by porphyrin-Mn(V)-oxo species and apparent disproportionation equilibrium constants for porphyrin-Mn(IV)-oxo species

Porphyrin-manganese(V)-oxo and porphyrin-manganese(IV)-oxo species were produced in organic solvents by laser flash photolysis (LFP) of the corresponding porphyrin-manganese(III) perchlorate and chlorate complexes, respectively, permitting direct kinetic studies. The porphyrin systems studied were 5,10,15,20-tetraphenylporphyrin (TPP), 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPFPP), and 5,10,15,20-tetrakis(4-methylpyridinium)porphyrin (TMPyP). The order of reactivity for (porphyrin)Mn(V)(O) derivatives in self-decay reactions in acetonitrile and in oxidations of substrates was (TPFPP) > (TMPyP) > (TPP). Representative rate constants for reaction of (TPFPP)Mn(V)(O) in acetonitrile are k = 6.1 x 10(5) M(-1) s(-1) for cis-stilbene and k = 1.4 x 10(5) M(-1) s(-1) for diphenylmethane, and the kinetic isotope effect in oxidation of ethylbenzene and ethylbenzene-d(10) is k(H)/k(D) = 2.3. Competitive oxidation reactions conducted under catalytic conditions display approximately the same relative rate constants as were found in the LFP studies of (porphyrin)Mn(V)(O) derivatives. The apparent rate constants for reactions of (porphyrin)Mn(IV)(O) species show inverted reactivity order with (TPFPP) < (TMPyP) < (TPP) in reactions with cis-stilbene, triphenylamine, and triphenylphosphine. The inverted reactivity results because (porphyrin)Mn(IV)(O) disproportionates to (porphyrin)Mn(III)X and (porphyrin)Mn(V)(O), which is the primary oxidant, and the equilibrium constants for disproportionation of (porphyrin)Mn(IV)(O) are in the order (TPFPP) < (TMPyP) < (TPP). The fast comproportionation reaction of (TPFPP)Mn(V)(O) with (TPFPP)Mn(III)Cl to give (TPFPP)Mn(IV)(O) (k = 5 x 10(8) M(-1) s(-1)) and disproportionation reaction of (TPP)Mn(IV)(O) to give (TPP)Mn(V)(O) and (TPP)Mn(III)X (k approximately 2.5 x 10(9) M(-1) s(-1)) were observed. The relative populations of (porphyrin)Mn(V)(O) and (porphyrin)Mn(IV)(O) were determined from the ratios of observed rate constants for self-decay reactions in acetonitrile and oxidation reactions of cis-stilbene by the two oxo derivatives, and apparent disproportionation equilibrium constants for the three systems in acetonitrile were estimated. A model for oxidations under catalytic conditions is presented.