Cation exchange at the mineral-water interface: H3O+/K+ competition at the surface of nano-muscovite

This article describes a (39)K nuclear magnetic resonance (NMR) spectroscopic study of K (+) displacement at the muscovite/water interface as a function of aqueous phase pH. (39)K NMR spectra and T 2 relaxation data for nanocrystalline muscovite wet with a solid/solution weight ratio of 1 at pH 1, 3, and 5.5 show substantial liquid-like K (+) only at pH 1. At pH 3 and 5.5, all K (+) appears to be associated with muscovite as inner- or outer-sphere complexes, indicating that H 3O (+) does not displace basal surface K (+) beyond the (39)K detection limit under these conditions. In our pH 1 mixture, only approximately 1/3 of the initial basal surface K (+) population is located more than 3-4 A from the surface. (29)Si and (27)Al MAS NMR spectra and SEM images show no evidence of dissolution during the (39)K experiments, consistent with the liquid-like (39)K fraction originating from displaced basal surface K (+). Assuming no muscovite dissolution or interlayer exchange, the K (+)/H 3O (+) ratio relevant to the solution/surface exchange equilibrium is controlled by the total amount of K (+) on the surface and H 3O (+) in solution (K (+) surf/H 3O (+) aq). These parameters, in turn, depend on the basal surface area, solution pH, and the solid/solution ratio. The results here are consistent with significant displacement of surface K (+) only under conditions where the initial K (+) surf/H 3O (+) aq ratio is less than approximately 1. Computational molecular models of the muscovite/water interface should account for both K (+) and H 3O (+) in the near-surface region.     

Ionic components dependence of the charge transfer reactions at the silicon/HF solution interface

The actual requirements for circuit miniaturization and production economy require obtaining smooth silicon surfaces using diluted chemicals, especially HF treatment. This fundamental research deals with the electrochemical corrosion of n- and p-type silicon substrates in 0.25 M dilute HF solutions, and examines the influence of fluoride ions or protons additives. All experiments were conducted both in the dark and under constant light flux, with solutions thoroughly degassed by high purity argon bubbling. Polarization resistance measurements near the open circuit potential lead to the value of the corrosion current. The kinetics of charge transfer reactions, studied by linear voltammetry, were interpreted as a function of the carrier density in the energy levels of the semiconductor and the concentration of acceptor species in the solution. The influence of these parameters on the surface roughening of the silicon samples was also studied by ex situ atomic force microscopy profile measurements. Received: 13 December 1998 / Accepted: 29 March 1999     

A new dissolution microcalorimeter: calibration and test

A new batch microcalorimetric vessel for the determination of enthalpies of dissolution of small amounts of easily or slightly soluble solids was developed at University of Lund, Sweden and was tested at University of Porto, Portugal.The vessel forms part of a series of twin heat conduction microcalorimeters. In a series of consecutive dissolution steps up to four samples, each 0.1-3 mg, can be injected into a solvent chamber of the vessel, volume 20 ml. The high stability of the baseline allows solution experiments to be extended over several hours.All measurements reported were conducted at 298.15 K and with water as the solvent. The calorimeter was calibrated chemically by dissolution of potassium chloride. The performance of the instrument was further tested by measurements of the enthalpies of dissolution of acetanilide and adenine, 18.25±0.56 and 31.78±0.64 kJ mol⁻¹, respectively. No concentration dependence was found. The results are in good agreement with values in the literature.     

Determination of the solubility, dissolution enthalpy and entropy of Deflazacort in different solvents

The solubility of Deflazacort in four solvents, acetone, ethyl acetate, ethanol and 2-propanol, was measured at temperatures ranging from 293.15 K to 348.15 K at atmospheric pressure using Laser Monitoring Technique. The solubility data were correlated by the modified Apelblat model. Then the dissolution enthalpy and entropy of Deflazacort were predicted from the solubility data using van’t Hoff equation. In this study, it should be concluded that the viscosity and surface tension of solvents affect the solubility behavior, dissolution enthalpy and entropy of Deflazacort in different solvents.     

Synthesis,surface activity,and corrosion inhibition of dentritic quaternary ammonium salt-type tetrameric surfactants

The dentritic quaternary ammonium salt-type tetrameric surfactant (4C₁₂tetraQ) was synthesized, and the molecular structure was confirmed by ¹H NMR and FTIR. The surface activity of 4C₁₂tetraQ was investigated by surface tension, and surface chemical parameters, such as critical micelle concentration (cmc), efficiency (pC₂₀), effectiveness (π_cmc), the surface tension value at cmc (γ_cmc), minimum surface area (A_min), maximum surface excess (Γ_max), and cmc/C₂₀ were obtained from the measurement results. The results show that the 4C₁₂tetraQ surfactant has higher surface activity than the traditional monomeric surfactants (dodecyl trimethyl ammonium bromide, DTAB). The Krafft points were taken as <0°C, indicating that the synthesized tetrameric surfactants had good water solubility. Free energies of micellization and adsorption show that 4C₁₂tetraQ display greater propensity to absorb at the interface than form micelle in the bulk of the aqueous solution, and that the two processes are spontaneous. The measurement results show that 4C₁₂tetraQ has good emulsification power and foam performance. The corrosion efficiency was evaluated with the loss weight method in 1?mol/L HCl solution, and the results show that the 4C₁₂tetraQ surfactant has good corrosion inhibition, and can be considered as a corrosion inhibitor.     

Reactions at the solid-liquid interface: surface-controlled dissolution of solid particles. The dissolution of potassium bicarbonate in dimethylformamide

We present a mathematical model for the surface-controlled dissolution of solid particles. This is applied to the dissolution of a solid having different particle size distribution functions: those of a monodispersed solid containing particles of all one size, a two-size-particle distribution, and a Gaussian distribution of the particle sizes. The dissolution of potassium bicarbonate in dimethylformamide is experimentally studied indirectly at elevated temperatures. We monitor the dissolution via the homogeneous deprotonation of 2-cyanophenol by dissolved KHCO3. The loss of 2-cyanophenol was detected electrochemically at a platinum microdisk electrode, and separately, the formation of the 2-cyanophenolate anion was monitored via UV-visible spectroscopic analysis. The results presented show that the kinetics of the loss of 2-cyanophenol behaves on one hand as a homogeneous chemical process and on the other hand as a dissolution-rate-controlled process. Initially, predissolved KHCO3 in solution deprotonates the 2-cyanophenol and homogeneous reaction dominates the observed kinetics, and at longer times, the observed kinetics is controlled by the rate of KHCO3 dissolution. Modeling of the experimental results for the surface-controlled dissolution of KHCO3 in dimethylformamide (DMF) yielded a mean value for the dissolution rate constant, k, at elevated temperatures; k was found to have a value of (1.1 +/- 0.3) x 10(-8) mol cm(-2) s(-1) at 100 degrees C, and the activation energy for the dissolution was 34.4 +/- 0.4 kJ mol(-1) over the temperature range 60-100 degrees C.     

Reactivity of metal oxides: Thermal and photochemical dissolution of MO and MFe2O4 (M=Ni, Co, Zn)

Dissolution rates of NiO, CoO, ZnO, α-Fe₂O₃ and the corresponding ferrites in 0.1 mol dm⁻³ oxalic acid at pH 3.5 were measured at 70 °C. The dissolution of simple oxides proceeds through the formation of surface metal oxalate complexes, followed by the transfer of surface complexes (rate-determining step). At constant pH, oxalate concentration and temperature, the trend in the first-order rate constant for the transfer of the surface complexes (k_Me; Me=Ni, Co, Zn, Fe) parallels that of water exchange in the dissolved metal ions (k_−w). Thus, the most important factor determining the rates of dissolution of metal oxides is the lability of Me-O bonds, which is in turn defined by the electronic structure of the metal ion and its charge/radius ratio. UV (384 nm) irradiation does not increase significantly the dissolution rates of NiO, CoO and ZnO, whereas hematite is highly sensitive to UV light. For ferrites, the reactivity order is ZnFe₂O₄>CoFe₂O₄?NiFe₂O₄. Dissolution is congruent, with rates intermediate between those of the constituent oxides, Fe₂O₃ and MO (M=Co, Ni, Zn), reflecting the behavior of very thin leached layers with little Zn and Co, but appreciable amounts of Ni. The more robust Ni²⁺ labilizes less the corresponding ferrite. The correlation between log k_M and log k_−w is somewhat blurred and displaced to lower k_M values. Fe(II), either photogenerated or added as salt, enhances the rate of Fe(III) phase transfer. A simple reaction mechanism is used to interpret the data.     

Effect of piperidones on hydrogen permeation and corrosion inhibition of mild steel in acidic solutions

The influence of 3-methyl-2,6-diphenyl piperidin-4-one (MDPO) and 2-phenyl decahydroquinoline-4-one (PDQO) synthesised in the laboratory on hydrogen permeation and corrosion inhibition of mild steel in 1N H₂SO₄ has been studied using weight loss and various electrochemical AC and DC corrosion-monitoring techniques. Both the compounds inhibit the corrosion of mild steel in H₂SO₄. Potentiodynamic polarisation studies clearly reveal that they behave predominantly as cathodic inhibitors. The extent of decrease in hydrogen permeation current through steel surfaces has been studied by the hydrogen electropermeation technique. Double layer capacitance (C _dl ) and charge transfer resistance (R _t ) values are derived from Nyquist plots obtained from AC impedance studies. The adsorption of these compounds on mild steel surfaces from H₂SO₄ obeys Temkin’s adsorption isotherm.     

Investigation on corrosion inhibition and adsorption mechanism of azomethine derivatives at mild steel/0.5 ​M ​H2SO4 solution interface: Gravimetric,electrochemical, SEM and EDX studies

The inhibition performance of five azomethine derivatives such as: 1-(4-Methyloxy phenylimino)-1-(phenylhydrazono)-propan-2-one (SB₁), 1-(4-Methylphenylimino)-1-(phenylhydrazono) propan-2-one (SB₂), 1-(phenylimino)-1(phenylhydrazono)-propan-2-one (SB₃), 1-(4-Bromo phenylimino)-1(phenylhydrazono)-propan-2-one (SB₄) and 1-(4-Chlorophenylimino)-1(phenylhydrazono) -propan-2-on (SB₅) as corrosion inhibitors for mild steel in sulfuric acid 0.5 ?M were investigated using different methods. All experimental results demonstrate that these compounds are eficients inhibitors. The inhibition efficiencies ($IE$) increase with inhibitors concentration. At 7.5 $\times$ 10^?5 ?M, the $IE$ was 97.27%, 96.31%, 94.23%, 93.19 and 91.64% for SB₁, SB₂, SB₃, SB₄ and SB₅, respectively. The potentiodynamic polarization results indicated that all the studied inhibitors act as mixed type. The adsorption process on mild steel surface obeyed Langmuir isotherm. The associated activation parameters and thermodynamic have been calculated and discussed. The adsorbed film formed on the metal surface was characterized by SEM and EDX.     

The inhibition mechanism of pitting corrosion of pure aluminum by nitrate and sulfate ions in neutral chloride solution

The inhibition mechanism of pitting corrosion of natural oxide film-covered pure aluminum by NO⁻ ₃ and SO²⁻ ₄ ions has been examined in 0.1 M NaCl solution using potentiodynamic polarization experiments, a.c. impedance spectroscopy, Auger electron spectroscopy and a combination of the potentiostatic current transient method and optical microscopy. It was found that NO⁻ ₃ ions can be incorporated into the natural oxide film on pure aluminum at open-circuit potential, but the incorporation of SO²⁻ ₄ ions into the film hardly occurs. The incorporation of NO⁻ ₃ ions lowered the pitting susceptibility of pure aluminum in 0.1 M NaCl solution. Based upon the experimental results, it is suggested that the pitting corrosion inhibition mechanism by anions can be classified into two different groups: inhibition by competitive adsorption of anions (SO²⁻ ₄) with Cl⁻ ions and inhibition by the incorporation of anions (NO⁻ ₃) into the film rather than competitive adsorption. Both cases may impede the incorporation of Cl⁻ ions into the film, thus inhibiting pitting corrosion of natural oxide film-covered pure aluminum in chloride solutions. Received: 16 October 1998 / Accepted: 6 January 1999     

聚丙烯酰胺型配体交换色谱载体的合成及分离氨基酸

合成了以亲水性聚丙烯酰胺为骨架的含有可与铜离子形成五元环螯合物配位基团的螯合树脂,这些树脂的Cu~(2+)络合物作为配体交换色谱载体对中性氨基酸进行了分离,并与2种已知螯合树脂的Cu~(2+)络合物作为载体的色谱行为作了比较。本文合成的树脂具有最好的分高性能,研究了色谱条件对分离的影响,讨论了色谱分离机制。     

食品中降解糖的高灵敏、高选择性的检测方法

本文使用岛津公司开发的,以精氨酸为衍生剂的降解糖柱后衍生荧光检测系统,并选择配位体交换色谱法为分离手段,获得了6种降解糖的线性关系和检出限。本法重现性较好。利用该法测定了酱菜汁中的各种糖组分的含量,分析结果满意。     

Kinetic determination of organosulphur ligands by inhibition: Trace determination of cysteine and maleonitriledithiolate (MNDT)

Some organosulphur ligands have been found to inhibit the mercury(II) catalyzed substitution of cyanide in hexacyanoferrate(II) by N-methylpyrazinium ion (Mpz⁺). The inhibitory effect is due to the binding tendency of catalyst Hg²⁺ with these inhibitors. This effect has been used as a basis to develop a kinetic method for the determination of trace amounts of two organosulphur ligands viz. cysteine and MNDT. The reaction was followed spectrophotometrically at 655 nm by measuring the decrease in absorbance of the product [Fe(CN)₅Mpz]²⁻. The influence of the reaction variables has also been studied. A general mechanistic scheme of the indicator reaction system including the role of inhibitor has been proposed and applied to determine the organosulphur ligands. Under the selected experimental conditions cysteine and MNDT have been determined in the range of 2–20 × 10^− 7 M and 5 × 10^− 8 M to 12 × 10^− 7 M respectively in various aqueous samples. The analytical concentration range depends upon the amount of Hg²⁺ present in the indicator reaction and also on the stability of the Hg²⁺-inhibitor complex in question. Under specified conditions, the detection limit for cysteine and MNDT are 2 × 10^− 7 M and 5 × 10^− 8 M respectively. The influences of possible interference by major amino acids, on the determination of cysteine and their limits have been investigated.     

Synergistic inhibition effects between leaves and stem extracts of Sida acuta and iodide ion for mild steel corrosion in 1 M H2SO4 solutions

The synergistic action caused by iodide ions on the corrosion inhibition of mild steel in 1 M H₂SO₄ by leaves and stem extracts of Sida acuta was studied using weight loss and hydrogen evolution methods at 30–60 °C. It was found that the leaves and stem extracts of S. acuta inhibited the acid induced corrosion of mild steel. Addition of iodide ions enhances the inhibition efficiency to a considerable extent. The inhibition efficiency increases with increase in the iodide ion concentration but decreases with rise in temperature. Adsorption of the extracts alone and in combination of iodide ion was found to obey Freundlich adsorption isotherm at all temperatures studied. Inhibition mechanism is deduced from the temperature dependence of the inhibition efficiency as well as from assessment of kinetic and activation parameters that govern the processes. The synergism parameter (S₁) is defined and evaluated from the inhibition efficiency values. This parameter for the different concentrations of iodide ions from the two techniques employed is found to be greater than unity indicating that the enhanced inhibition efficiency of the extracts caused by the addition of iodide ions is due to synergism.     

Experimental,Monte Carlo and molecular dynamics simulations to investigate corrosion inhibition of mild steel in hydrochloric acid solutions

The efficiency of three furan derivatives, namely 2-(p-toluidinylmethyl)-5-methyl furan (Inh. A), 2-(p-toluidinylmethyl)-5-nitro furan (Inh. B) and 2-(p-toluidinylmethyl)-5-bromo furan (Inh. C), as possible corrosion inhibitors for mild steel in 1.0 M HCl, has been determined by weight loss and electrochemical measurements. These compounds inhibit corrosion even at very low concentrations, and 2-(p-toluidinylmethyl)-5-methyl furan (Inh. A) is the best inhibitor. Polarization curves indicate that all compounds are mixed-type inhibitors, affecting both cathodic and anodic corrosion currents. Adsorption of furan derivatives on the mild steel surface follows the Langmuir adsorption isotherm, and the calculated Gibbs free energy values confirm the chemical nature of the adsorption. Monte Carlo simulations technique incorporating molecular mechanics and molecular dynamics can be used to simulate the adsorption of furan derivatives on mild steel surface in 1.0 M HCl.     

Coupled chemical processes at clay/electrolyte interface: a batch titration study of Na-montmorillonites

The present work addresses the protolytic charge of montmorillonite, which occurs on the broken-bond sites at the particle edges. The purpose is to overcome the general difficulty arising in potentiometric titration due to coupled side reactions, which severely impede the titrant budget (partial dissolution of the clay and of secondary phases, hydrolysis and readsorption of dissolved species, cation exchange). Batch potentiometric titrations were carried out on the montmorillonite fractions extracted from two bentonites (MX80 and SWy2) to quantify their protolytic charge. The effects of equilibration time (24 h and 7 days), pH from 4 to 10, and ionic strength (0.1 and 0.01 mol L(-1)) were extensively studied for the MX80 sample. Quantification of dissolution was achieved by analysis of the equilibrium solutions for dissolved species and by La(3+) exchange of the readsorbed species. The results clearly show that secondary phases such as iron- or silica-rich minerals contribute to the dissolved species, according to the nature of the raw bentonite. Furthermore, readsorption affects significant amounts of dissolved species. The overconsumption of proton/hydroxide due to dissolution, readsorption, and hydrolysis of dissolved species was evaluated using a self-consistent thermodynamic calculation. The ability of such calculation to correct the raw titration curves in order to extract the titrable surface charge of montmorillonite was evaluated by comparison with the continuous titration procedure. Especially in the alkaline domain, correcting the raw batch titration curves for the measured side reactions failed to reproduce the continuous titration curves. These observations demonstrate the limitations of the batch titration method and the superiority of fast, continuous methods for quantifying the dissociable surface charge of clays.     

Investigation of the kinetics of aquation of the 1:2 complex between Cr and nitrilotriacetic acid

Aquation of the 1:2 complex between Cr^III and nitrilotriacetic acid (NTA) was monitored using a combination of capillary electrophoresis (CE), ultraviolet–visible (UV–vis) spectrophotometry, and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. To our knowledge, this is the first published report of the use of either CE or ATR-FTIR to monitor the kinetics of ligand exchange reactions of Cr^III–aminocarboxylate complexes. The aquation products were identified as the 1:1 Cr^III complex with NTA and “free” NTA. The 1:1 complex dimerized to form a 2:2 complex in a slower subsequent reaction step. Rates of disappearance of the 1:2 complex were first-order under all experimental conditions. First-order rate constants for aquation, k_obs (h⁻¹), measured using all three techniques were similar at equivalent pH conditions, and with values reported previously in the literature. Measured k_obs values exhibited a complicated pH dependence with three distinct regions: (i) at pH < 6.5, k_obs values increased with decreasing pH, (ii) between pH 6.5 and 8.0, k_obs values were relatively constant, and (iii) at 8.0 < pH < 10.0, k_obs increased with increasing pH and then leveled off. A kinetic model incorporating five distinct aquation pathways was successfully employed to model the pH dependence of k_obs from 0.0 < pH < 10.0. These results show that CE and ATR-FTIR can be used as tools for better understanding ligand exchange processes occurring in aqueous solution.     

Kinetic determination of cysteine and thiosulphate by inhibition of Hg(II) catalyzed ligand substitution reaction

The sulphur containing inhibitors (I), cysteine (Cys) and sodium thiosulphate (THS), have been found to inhibit Hg(II) catalyzed exchange of cyanide in hexacyanoferrate(II) by nitroso-R-salt (NRS). The inhibitory effect of both the ligands are attributed to their binding tendencies with Hg(II) leading to the formation of catalyst-inhibitor (C-I) complex. The reactions have been followed spectrophotometrically in aqueous medium at 720 nm by noting the increase in absorbance of the green colour product, [Fe(CN)₅NRS]³⁻ at pH 6.50 ± 0.02, temp 25.0 ± 0.1 °C and ionic strength (μ) 0.1 M (KNO₃). A most plausible mechanistic scheme involving the role of analytes (inhibitors) has been proposed. The values of equilibrium constants for complex formation between catalyst-inhibitor (K_CI), catalyst-substrate (K_S) and Mechaelis-Menton constant (K_m) have been computed from the kinetic data. The linear calibration curves have been established between absorbance and inhibitor concentrations under specified conditions. Cys and THS have been determined in the range 1-5 × 10^− 7 M and 4.9-16.9 × 10^− 7 M respectively. The detection limits have been computed to be 1 × 10^− 7 M and 4.9 × 10^− 7 M for Cys and THS, respectively.