Enantioselective total synthesis of a potent antitumor antibiotic, fredericamycin A.

The asymmetric total synthesis of both enantiomers of the potent antitumor antibiotic fredericamycin A (1) is detailed based on the protocol for the construction of its peri-hydroxy polyaromatic skeleton bearing the chirality at the spiro carbon via a strong base-induced cycloaddition of suitably substituted homophthalic anhydrides (AB-ring unit) with an optically active CDEF-ring unit. Particular attention has been given to the novel synthesis of the optically active spiro carbon center by a stereospecific rearrangement of optically active benzofuzed-trans-epoxy acylates leading to spirocyclopentane-1,1'-indane systems. This method is quite useful for the construction of an optically active spiro compound and was applied to the synthesis of the optically pure CDEF-ring unit of 1. Cycloaddition of the optically pure CDEF-ring unit to AB-ring units prepared via benzyne afforded two natural and unnatural-type hexacyclic compounds, which were converted to natural and unnatural enantiomers of synthetic 1, and the absolute configuration of natural 1 was determined as S.     

Oxidation of Enones for Regioselective [3+2] Cycloaddition through γ-Enone Radical Intermediates

Herein, an oxidization reaction of enones with a Cu^II complex that leads to a new type of regioselective [3+2] cycloaddition is reported. Highly functionalized cyclopentenes and spirocyclic compounds are obtained in moderate-to-good yields. This cycloaddition reaction occurred through the formation of γ-enone radicals, providing a rarely explored reactivity pattern for enones.     

Anion radical [2 + 2] cycloaddition as a mechanistic probe: stoichiometry- and concentration-dependent partitioning of electron-transfer and alkylation pathways in the reaction of the Gilman reagent Me2CuLi.LiI with bis(enones)

Exposure of easily reduced aromatic bis(enones) 1a-1e to the methyl Gilman reagent Me(2)CuLi.LiI at 0 degrees C in tetrahydrofuran solvent provides the products of tandem conjugate addition-Michael cyclization, 2a-2e, along with the products of [2 + 2] cycloaddition, 3a-3e. Complete partitioning of the Gilman alkylation and [2 + 2] cycloaddition pathways may be achieved by adjusting the loading of the Gilman reagent, the rate of addition of the Gilman reagent, and the concentration of the reaction mixture. The Gilman alkylation manifold is favored by the rapid addition of excess Gilman reagent at higher substrate concentrations, while the [2 + 2] cycloaddition manifold is favored by slow addition of the same Gilman reagent at lower concentrations and loadings. Notably, [2 + 2] cycloaddition to form 3a-3e is catalytic in Gilman reagent. Kinetic data reveal that the ratio of 2a and 3a changes such that the cycloaddition pathway becomes dominant upon increased consumption of Gilman reagent. These data suggest a concentration-dependent speciation of the Gilman reagent and differential reactivity of the aggregates present at higher and lower concentrations. While the species present at higher concentration induce Gilman alkylation en route to products 2a-2e, the species present at lower concentration provide products of catalytic [2 + 2] cycloaddition, 3a-3e. Moreover, upon electrochemical reduction of the bis(enones) 1a-1e, or chemically induced single-electron transfer from arene anion radicals, the very same [2 + 2] cycloadducts 3a-3e are formed. The collective data suggest that [2 + 2] cycloadducts 3a-3e arising under Gilman conditions may be products of anion radical chain cyclobutanation that derive via electron transfer (ET) from the Me(2)CuLi.LiI aggregate(s) present at low concentration. These observations provide a link between the Gilman alkylation reaction and related ET chemistry and suggest these reaction paths are mechanistically distinct. This analysis is made possible by the recent observation that easily reduced bis(enones) are subject to intramolecular [2 + 2] cycloaddition upon cathodic reduction or chemically induced ET from arene anion radicals, and is herewith showcased as a novel method of testing for the intermediacy of enone anion radicals.     

过渡金属催化合成吡咯-2-甲酸酯的研究进展

吡咯-2-甲酸酯广泛存在于生物活性分子中,在医药领域具有十分重要的应用,因此吡咯-2-甲酸酯类化合物的合成研究受到了广泛关注.过渡金属催化的环加成反应在合成吡咯骨架方面应用广泛,具有区域选择性专一的优点.且过渡金属配体导向的C-N键构筑方法具有原子步骤经济性较高、效率高、反应条件温和以及选择性高等优点.按照过渡金属催化剂分类,对吡咯-2-甲酸酯的[3+2]、[4+1]与[2+2+1]等成环反应的合成方法进行综述,介绍了过渡金属催化吡咯-2-甲酸酯化合物的机理及其应用,并对吡咯-2-甲酸酯的合成进行了展望.     

Quantum mechanical inspection of the Diels-Alder approach to biaryls mechanism

The Diels-Alder reaction of substituted cyclohexadienes with substituted phenylacetylenes offers an attractive alternative for the synthesis of biaryl compounds via a two-step cycloaddition/cycloelimination pathway. Quantum mechanical calculations using B3LYP and M06-2X density functional methods for the reaction of 2-chloro-6-nitrophenylacetylene with 1-carbomethoxy-cyclohexadiene show the reaction proceeds by a stepwise diradical [4+2] cycloaddition followed by concerted [2+4] cycloelimination of ethylene. [2+2] cycloadducts are also the result of stepwise addition. [2+2] cycloadducts isomerize to [4+2] cycloadducts via diradical pathways, which involve the same diradical intermediate in cycloaddition. There is also a competitive conrotatory ring opening followed by trans-cis double bond isomerization pathway of the [4.2.0] bicycle (the [2+2] cycloadduct) to give the cis,cis,cis-1,3,5-cyclooctatriene.     

Intramolecular Huisgen [3+2] cycloaddition in water: synthesis of fused pyrrolidine–triazoles

The intramolecular alkyne–azide Huisgen [3+2] cycloaddition reaction as a ‘click-chemistry’ reaction without a metal catalyst has been studied under aerobic conditions. The synthesis of various pyrrolidine–triazole hybrid compounds has also been achieved by using this intramolecular cycloaddition reaction in water with complete 1,5-regioselectivity.     

Cycloaddition Reactions and Dendritic Polymer Architectures – A Perfect Match

Summery: The potential of cycloaddition (CA) reactions for the synthesis of dendritic polymers is pointed out. The [4 + 2] Diels Alder cycloaddition as well as 1,3-dipolar CA reactions including “click chemistry” are addressed, and the advantages of these reactions like high selectivity, thus high tolerance towards additional functionalities, high yields and synthesis under mild reaction conditions are highlighted. New perfectly branched dendrimers as well as hyperbranched polymers have been prepared and modified using the 1,3-dipolar cycloaddition reaction of azines with alkynes. The 1,3-dipolar CA reaction of bisazine with maleimides results in hyperbranched and thus, irregular and broadly distributed polymers though with a degree of branching of 100% due to special intermediate formation. The [4 + 2] Diels Alder cycloaddition was successfully applied for the synthesis of highly branched polyphenylene structures using the AB₂ + AB and the A₂ + B₃ approach. CA reactions are also very suitable for highly efficient polymer analogous reactions and thus, they can also be used to prepare complex polymer architectures like dendronized polymers.     

3 + 2] cycloaddition reactions of 4-alkyl-3-hydroxy-2H-pyrazolo[4,3-c]isoquinolinium inner salts

Heating dipolarophiles with 4-alkyl-3-hydroxy-2H-pyrazolo[4,3-c]isoquinolinium hydroxide inner salts results in [3 + 2] cycloaddition across positions 3a and 5 of the aromatic system to give the [3 + 2] cycloadducts in good yield. When the 4-alkyl substituent is a 2-acetate ester and the methylene group can be deprotonated, a second mode of [3 + 2] cycloaddition becomes available for the resulting anion (across the side chain methine group and position 5 of the aromatic system) and occurs under basic conditions, allowing either of two modes of [3 + 2] cycloaddition to be selected by appropriate choice of reaction conditions.     

Catalytic Enantioselective Synthesis of Lactams through Formal [4+2] Cycloaddition of Imines with Homophthalic Anhydride

An amide‐thiourea compound, operating through a novel ion pairing mechanism, is an efficient organocatalyst for the asymmetric reaction of homophthalic anhydride with imines. N ‐aryl and N ‐alkyl imines readily undergo formal [4+2] cycloaddition to provide lactams with high levels of enantio‐ and diastereoselectivity. The nature of the key chiral ion pair intermediate was elucidated by DFT calculations.     

1,2-联烯基酮的合成与反应

1,2-联烯基酮可以通过2-丙炔基酮异构化反应,相应有机金属试剂中间体与酯、酰氯或酰胺的反应,[2,3]或[3,3]迁移反应,Wittig反应,消除反应,2,3-联烯醇氧化等方法合成。由于联烯酮上含有吸电子基团羰基,它可发生亲核加成、环加成、环化反应。     

Recent advances in [2+2+2] cycloaddition reactions

The [2+2+2] cycloaddition is an elegant, atom-efficient and group tolerant process for the synthesis of carbo- and heterocycles, mostly aromatic, involving the formation of several C-C bonds in a single step. Cyclotrimerisation is catalyzed by a variety of organometallic complexes, including more than 15 different metals. The aim of this tutorial review is to point out the most recent advances in this field and to encourage the use of this reaction enroute to complex molecules. After summarizing the most common catalysts and reaction conditions generally used, we survey the mechanistic features currently accepted for this reaction. Section 4 covers the scope of the different [2+2+2] cycloaddition versions starting with the cyclotrimerisation of three triple bonds, including nitriles, with especial emphasis on asymmetric reactions that create central, axial or planar chirality. Then, reactions that use double bonds are addressed. Finally, the most outstanding examples of natural products synthesis using [2+2+2] cycloadditions as a key step reported recently are shown.     

Pd-catalyzed carbonylation of diazo compounds at atmospheric pressure: a catalytic approach to ketenes

The carbonylation of carbenes through catalytic cycles is highly desirable due to the importance of ketene-mediated reactions in organic synthesis. In this investigation, a highly efficient and mild catalytic approach toward ketene intermediates has been developed based on Pd-catalyzed carbonylation of diazo compounds with CO. When α-diazocarbonyl compounds or N-tosylhydrazone salts are heated in the presence of a palladium catalyst under atmospheric pressure of CO, ketene intermediates are formed in situ, where they undergo further reactions with various nucleophiles such as alcohols, amines, or imines. The Pd-catalyzed tandem carbonylation-Staudinger cycloaddition gives β-lactam derivatives in good yields with excellent trans diastereoselectivity. The results from DFT calculation on the reaction mechanism suggest that Pd is involved in the [2 + 2] cycloaddition process and affects the diastereoselectivity of the β-lactam products by assisting isomerization of the addition intermediate. On the other hand, the acylketenes generated from the Pd-catalyzed carbonylation of α-diazoketones react with imines in a formal [4 + 2] cycloaddition manner to afford 1,3-dioxin-4-one derivatives. This straightforward carbonylation provides a new approach toward highly efficient catalytic generation of ketene species under mild conditions.     

Scope of the formal [3+2] cycloaddition for the synthesis of substituted 3-arylindanes and related compounds

We report the single step synthesis of several 3-arylindanes and related compounds via a formal [3+2] cycloaddition. A study of the influence of the aromatic ring substitution pattern on the reaction was carried out.     

Advances in cycloaddition polymerizations

Cycloaddition reactions have been employed in polymer synthesis since the mid-nineteen sixties. This critical review will highlight recent notable advances in this field. For example, [2 + 2] cycloaddition reactions have been utilized in numerous polymerizations to enable the construction of strained polymer systems such as poly(2-azetidinone)s that can, in turn, afford polyfunctional beta-amino acid derived polymers. Polymers have also been synthesized successfully via (3 + 2) cycloaddition methods utilizing both thermal and high-pressure conditions. 'Click chemistry'--a process involving the reaction of azides with olefins, has also been adopted to generate linear and hyperbranched polymer architectures in a very efficient manner. [4 + 2] Cycloadditions have also been utilized under thermal and high-pressure conditions to produce rigid polymers such as polyimides and polyphenylenes. These cycloaddition polymerization methods afford polymers with potential for use in high performance polymers applications such as high temperature resistant coatings and polymeric organic light emitting diodes.     

CpRuCl(PPh3)2-catalyzed cyclopropanation of bicyclic alkenes with tertiary propargylic acetates

The electron-rich cyclopentadienylruthenium complex CpRuCl(PPh3)2 turns out to be an efficient catalyst for the regio- and stereoselective cyclopropanation of bicyclic alkenes with tertiary propargylic carboxylates. The reaction provides 1,2,3-trisubstituted cyclopropanes in high yields as a single stereoisomer instead of the expected cyclobutenes via [2 + 2] cycloaddition. Functional groups such as ethers, esters, alcohols, phenols, ketones, esters, carboxylic anhydrides, nitriles, halides, sulfones, imides, carbamates, and azines are tolerated with the catalyzed reaction. An efficient cyclopropanation of cyclobutenes was also demonstrated, providing the strained bicyclo[2.1.0(1,3)]pentane framework.     

A sequential cyclization/π-extension strategy for modular construction of nanographenes enabled by stannole cycloadditions

The synthesis of polycyclic aromatic hydrocarbons (PAHs) and related nanographenes requires the selective and efficient fusion of multiple aromatic rings. For this purpose, the Diels–Alder cycloaddition has proven especially useful; however, this approach currently faces significant limitations, including the lack of versatile strategies to access annulated dienes, the instability of the most commonly used dienes, and difficulties with aromatization of the [4 + 2] adduct. In this report we address these limitations via the marriage of two powerful cycloaddition strategies. First, a formal Cp₂Zr-mediated [2 + 2 + 1] cycloaddition is used to generate a stannole-annulated PAH. Secondly, the stannoles are employed as diene components in a [4 + 2] cycloaddition/aromatization cascade with an aryne, enabling π-extension to afford a larger PAH. This discovery of stannoles as highly reactive – yet stable for handling – diene equivalents, and the development of a modular strategy for their synthesis, should significantly extend the structural scope of PAHs accessible by a [4 + 2] cycloaddition approach.

Stannoles are introduced as a new, spontaneously aromatizing diene for [4 + 2] cycloadditions that can be easily introduced into diverse conjugated systems, facilitating the efficient synthesis of complex PAHs and their π-extension.     

Au-containing all-carbon 1,3-dipoles: generation and [3+2] cycloaddition reactions

A novel approach to generate Au-containing all-carbon 1,3-dipoles is developed via an unprecedented migration-fragmentation of ketals/acetals. These in situ generated dipoles undergo rapid [3+2] cycloaddition under mild conditions with various enones/enals, electron-rich aromatic aldehydes, and N-benzylindole, leading to flexible formation of highly functionalized dihydrofurans and cyclopentenes.     

Synthesis of thiazolidin-4-ones via [3+2] cycloaddition of in situ generated aza-oxyallylic cations with isothiocyanates

A highly efficient one-pot synthesis of thiazolidin-4-ones via [3+2] cycloaddition of aza-oxyallylic cations with isothiocyanates is developed. The aza-oxyallyic cations were generated in situ in the present of a base. This cycloaddition reaction allows the rapid access to a variety of thiazolidin-4-one derivatives in mild conditions, good yield, and excellent functional group compatibility.     

Cobalt(II)-Catalyzed [4+2] Annulation of Picolinamides with Alkynes via C−H Bond Activation

A cobalt(II)-catalyzed [4+2] annulation of picolinamides with alkynes via C−H bond activation has been developed. The operationally simple annulation reaction allows for the synthesis of acyl-substituted 1H-benzoquinoline bearing multiple aromatic rings (up to 96 % yield) without co-oxidant or other oxidation factors under mild conditions. Several control experiments were carried out. This practical [4+2] annulation provides an efficient route to access highly functionalized compounds.     

Strong base induced intramolecular cycloaddition of homophthalic anhydrides leading to polycyclic peri-hydroxy aromatic compounds

A strong base-induced intramolecular cycloaddition reaction homophthalic anhydride has been examined as a method for preparing polycyclic perihydroxy aromatic compounds.