Camphor-derived C(1)-symmetric chiral diamine organocatalysts for asymmetric Michael addition of nitroalkanes to enones

A series of stable C(1)-symmetric chiral diamines () were conveniently synthesized by condensing exo-(-)-bornylamine or (+)-(1S,2S,5R)-menthylamine with various commercially available Cbz-protected amino acids. Among them, can efficiently promote the Michael addition of nitroalkanes to a broad scope of enones with high yields (up to 96%) and excellent enantioselectivities (up to 98%) under mild conditions.     

Synthesis of C1-symmetric chiral secondary diamines and their applications in the asymmetric copper(II)-catalyzed Henry (nitroaldol) reactions

A small library of C(1)-symmetric chiral diamines (L1-L9) was constructed via condensing exo-(-)-bornylamine or (+)-(1S,2S,5R)-menthylamine with various Cbz-protected amino acids. Among them, ligand L1/CuCl(2)·2H(2)O complex (2.5 mol %) shows outstanding catalytic efficiency for Henry reaction between a variety of aldehydes and nitroalkanes to afford the expected products in high yields (up to 98%) with excellent enantioselectivities (up to 99%) and moderate to good diastereoselectivities (up to 90:10). This process is air- and moisture tolerant and has been applied to the synthesis of (S)-2-amino-1-(3,4-dimethoxyphenyl)ethanol (9), a key intermediate for (S)-epinephrine and (S)-norepinephrine. On the basis of HRMS and X-ray diffraction analysis of the L1/CuCl(2) complex, a transition-state model was proposed to explain the origin of asymmetric induction. The low catalyst loading, excellent yields and enantioselectivities, inexpensive copper salt, and mild reaction conditions make our catalytic system to be practically useful.     

Dynamic kinetic transformation of sulfinyl chlorides: synthesis of enantiomerically pure C(2)-symmetric bis-sulfoxides.

Two modular and highly convergent approaches for the synthesis of both isomers of a large number of optically pure C(2)-symmetric bis-sulfoxides have been developed, and their scope and limitations have been assessed. The first one uses as intermediate diastereomerically pure C(2)-symmetric bis-sulfinate esters 6(S(S),S(S)) and 6(R(S),R(S)), obtained by dynamic kinetic resolution of ethane-1,2-bis-sulfinyl chloride 5. A single inducer of chirality, the glucose-derived DAG (diacetone-D-glucose) 1 is used for the enantioselective synthesis of both diastereomerically pure C(2)-symmetric bis-sulfinate esters, thanks to the opposite stereodirecting effect of pyridine and (i)Pr(2)NEt used to catalyze the reaction. The second approach is based on the copper-catalyzed oxidative coupling of optically pure lithiomethyl sulfoxides. Both isomers of a large number of methyl sulfoxides can be obtained in a convergent manner using (R(S))- and (S(S))-DAG methanesulfinate esters 8R(S) and 8S(S). Methanesulfinates 8R(S) and 8S(S) are also obtained in an enantioselective way by a dynamic kinetic resolution of methane sulfinyl chloride 24. The final bis-sulfoxides are obtained with enhanced enantioselectivities compared to the corresponding monomers, as a result of the Horeau effect which is operating in both approaches. A model based on the formation of pentacoordinated sulfur intermediate is proposed. This model can explain the dynamic kinetic resolution observed via Berry pseudorotations, without the commonly accepted in situ racemization of the starting material. The usefulness of the approaches is demonstrated by the preparation of complexes of Pd(II) and Ru(II) bearing bidentated chiral sulfoxides as ligands.     

C2-symmetric bicyclo[3.3.1]nonadiene as a chiral ligand for rhodium-catalyzed asymmetric arylation of N-(4-nitrobenzenesulfonyl)arylimines

[Reaction: see text] Asymmetric synthesis of diarylmethylamines with high enantioselectivity (95-99% ee) was realized by use of a new C2-symmetric diene ligand, (1R,5R)-2,6-diphenylbicyclo[3.3.1]nona-2,6-diene (Ph-bnd), for the rhodium-catalyzed asymmetric arylation of N-(4-nitrobenzenesulfonyl)arylimines with arylboroxines.     

C2-symmetric bis(oxazolinato)lanthanide catalysts for enantioselective intramolecular hydroamination/cyclization

C(2)-symmetric bis(oxazolinato)lanthanide complexes of the type [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), [(4S,5R)-Ar(2)Box]La[N(TMS)(2)](2), and [(4S)-Ph-5,5-Me(2)Box]La[N(TMS)(2)](2) (Box = 2,2'-bis(2-oxazoline)methylenyl; Ar = 4-tert-butylphenyl, 1-naphthyl; TMS = SiMe(3)) serve as precatalysts for the efficient enantioselective intramolecular hydroamination/cyclization of aminoalkenes and aminodienes. These new catalyst systems are conveniently generated in situ from the known metal precursors Ln[N(TMS)(2)](3) or Ln[CH(TMS)(2)](3) (Ln = La, Nd, Sm, Y, Lu) and 1.2 equiv of commercially available or readily prepared bis(oxazoline) ligands such as (4R,5S)-Ph(2)BoxH, (4S,5R)-Ar(2)BoxH, and (4S)-Ph-5,5-Me(2)BoxH. The X-ray crystal structure of [(4S)-(t)BuBox]Lu[CH(TMS)(2)](2) provides insight into the structure of the in situ generated precatalyst species. Lanthanides having the largest ionic radii exhibit the highest turnover frequencies as well as enantioselectivities. Reaction rates maximize near 1:1 BoxH:Ln ratio (ligand acceleration); however, increasing the ratio to 2:1 BoxH:Ln decreases the reaction rate, while affording enantiomeric excesses similar to the 1:1 BoxH:Ln case. A screening study of bis(oxazoline) ligands reveals that aryl stereodirecting groups at the oxazoline ring 4 position and additional substitution (geminal dimethyl or aryl) at the 5 position are crucial for high turnover frequencies and good enantioselectivities. The optimized precatalyst, in situ generated [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), exhibits good rates and enantioselectivities, comparable to or greater than those achieved with chiral C(1)-symmetric organolanthanocene catalysts, even for poorly responsive substrates (up to 67% ee at 23 degrees C). Kinetic studies reveal that hydroamination rates are zero order in [amine substrate] and first order in [catalyst], implicating the same general mechanism for organolanthanide-catalyzed hydroamination/cyclizations (intramolecular turnover-limiting olefin insertion followed by the rapid protonolysis of an Ln-C bond by amine substrate) and implying that the active catalytic species is monomeric.     

C2-symmetric bis-hydrazones as ligands in the asymmetric Suzuki-Miyaura cross-coupling

Glyoxal bis-hydrazone derived from (S,S)-1-amino-2,5-diphenylpyrrolidine behaves as an excellent ligand for phosphine-free, asymmetric Suzuki-Miyaura cross couplings, thereby affording a variety of enantiomerically enriched biaryls with different substitution patterns. The high catalytic activity of the [PdCl2(bis-hydrazone)] complex allows reactions to be performed at room temperature, affording products with excellent enantioselectivities in all cases.     

Asymmetric double ring-opening of a C(2h)-symmetric bis-epoxide: improved enantiomeric excess of the product through enantioselective desymmetrisation and 'proof-reading' steps

A new strategy in asymmetric synthesis is described in which the desymmetrisation of a C(2h)-symmetric molecule is followed by a subsequent enantioselective 'proof-reading' step. The double asymmetric ring-opening of the bis-epoxide (1R*,3R*,5S*,7S*)-4,8-dioxa-tricyclo[5.1.0.0(3,5)]octane with azidotrimethylsilane, catalysed by a chiral chromium Salen catalyst, was studied. The reaction involves the initial asymmetric ring-opening of the bis-epoxide to give the intermediate in moderate enantiomeric excess (ca. 50% ee); the second ring-opening step yields the required diazido diol, (1S,3S,4S,6S)-4,6-diazidocyclohexane-1,3-diol, in 72% yield and 70% ee. The origin of proof reading stems from the diversion of the minor enantiomer of the intermediate to a centrosymmetric by-product, a process which improves the enantiomeric excess of the required product. Using alternative conditions, the reaction was optimised to yield the required product in >98% ee.     

Diastereoselective hydroxylation of 6-substituted piperidin-2-ones. An efficient synthesis of (2S,5R)-5-hydroxylysine and related alpha-amino acids

The synthesis of (2S,5R)-5-hydroxy-6-oxo-1,2-piperidinedicarboxylates (5) and related (3S,6R)-3-hydroxy-6-alkyl-2-oxo-1-piperidinecarboxylates has been developed. The approach is based on the asymmetric hydroxylation of enolates generated from the corresponding N-protected-6-substituted piperidin-2-ones. The utility of 5a as a precursor in the synthesis of (2S,5R)-5-hydroxylysine (1), an amino acid unique to collagen and collagen-like proteins, has also been demonstrated. (2S)-6-oxo-1,2-piperidinedicarboxylates (6) required for hydroxylation studies were prepared in 38-74% yield, starting from conveniently protected aspartic acid as inexpensive chiral adduct. Hydroxylation of 6 to 5 proceeds in high yield and excellent diastereoselectivity by treatment of their Li-enolate with (+)-camphorsulfonyloxaziridine at -78 degrees C. Ring opening of di-tert-butyl (2S,5R)-6-oxo-1,2-piperidinedicarboxylate ((5R)-5a) under reductive conditions afforded the corresponding 1,2-diol (17) in 91%, which was further transformed to (2S,5R)-5-hydroxylysine in four steps (84%). 17 is also a versatile intermediate in the preparation of tert-butyl (2S,5R)-2-[(tert-butoxycarbonyl)amino]-5-hydroxy-6-iodohexanoate (3) and tert-butyl (2S)-2-[(tert-butoxycarbonyl)amino]-4-[(2R)-oxiranyl]butanoate (4), two amino acid derivatives used in the total synthesis of the bone collagen cross-link (+)-pyridinoline (2a).     

Facile route to 3,5-disubstituted morpholines: enantioselective synthesis of O-protected trans-3,5-bis(hydroxymethyl)morpholines

[reaction: see text] (3R,5R)-1 R1 & R2 = TBDPS, (3S,5R)-2 R1 = Bn,R2 = TBDPS, (3S,5S)-3 R2 & R2 = Bn. trans-3,5-Bis(benzyl/tert-butyldiphenylsilyloxymethyl)morpholines, promising candidates for the C(2)-symmetric class of chiral reagents, were prepared with excellent optical purity. A key step in the synthesis is the coupling of a serinol derivative with 2,3-O-isopropylideneglycerol triflate or its equivalent. This methodology was extended to the synthesis of chiral trans-3-(benzyloxymethyl)-5-(tert-butyldiphenylsilyloxymethyl)morpholine, a potentially useful chiral building block.     

C2-symmetric bicyclo[2.2.2]octadienes as chiral ligands: their high performance in rhodium-catalyzed asymmetric arylation of N-tosylarylimines

Asymmetric synthesis of diarylmethylamines with high enantioselectivity (95-99% ee) was realized by use of a new C2-symmetric diene ligand, (1R,4R)-2,5-diphenylbicyclo[2.2.2]octa-2,5-diene (Ph-bod*), for the rhodium-catalyzed asymmetric arylation of N-tosylarylimines with arylboroxines.     

Hypervalent organobismuth(iii) carbonate, chalcogenides and halides with the pendant arm ligands 2-(Me2NCH2)C6H4 and 2,6-(Me2NCH2)2C6H3

R2BiOH (1) [R = 2-(Me2NCH2)C6H4] and (R2Bi)2O (2) are formed by hydrolysis of R2BiCl with KOH. Single crystals of were obtained by air oxidation of (R2Bi)2. The reaction of R2BiCl and Na2CO3 leads to (R2Bi)2CO3 (3). 3 is also formed by the absorption of CO2 from the air in solutions of 1 or 2 in diethyl ether or toluene. (R2Bi)2S (4) is obtained from R2BiCl and Na2S or from (R2Bi)2 and S8. Exchange reactions between R2BiCl and KBr or NaI give R2BiX [X = Br (5), I (6)]. The reaction of RBiCl2 (7) with Na2S and [W(CO)5(THF)] gives cyclo-(RBiS)2[W(CO)5]2 (8). cyclo-(R'BiS)2 (9) [R' = 2,6-(Me2NCH2)2C6H3] is formed by reaction of R'BiCl2 and Na2S. The structures of were determined by single-crystal X-ray diffraction.     

Novel C2-symmetric planar chiral diphosphine ligands and their application in pd-catalyzed asymmetric allylic substitutions

Novel C(2)-symmetric diphosphine ligands possessing only the planar chirality of ruthenocene, 1,1'-bis(diphenylphosphino)-2,2'-disubstituted-ruthenocenes (4), were prepared. With this kind of ligands, excellent enantioselectivity and especially highly catalytic activity in palladium-catalyzed asymmetric allylic substitutions of rac-1,3-diphenyl-2-propenyl acetate (9) were observed, compared to their ferrocene analogues 1. Good enantioselectivity and highly catalytic activity were also obtained with 4 in palladium-catalyzed asymmetric allylic substitutions of cyclohexen-1-yl acetate (12). Further study on the effect of R in ester group on enantioselectivity of 4 showed an opposite trend compared with their ferrocene analogues 1 in asymmetric allylic substitutions. For ruthenocene ligands 4, the one with the smaller R in the ester group gave higher enantioselectivity for the palladium-catalyzed asymmetric allylic substitutions of 9, while a converse trend had been observed with 1. However, for the palladium-catalyzed asymmetric allylic substitutions of 12, ligand 4 with a larger R in the ester group resulted in somewhat higher enantioselectivity but still an opposite trend with ligand 1. The X-ray diffraction study of crystal structures of 4 and 1 with Pd(II) was carried out and showed that the enantioselectivity was correlated to the twist angle existing in the palladium complex.     

Efficient asymmetric hydrogenation with rhodium complexes of C(1)-symmetric 2,5-dimethylphospholane-diphenylphosphines

The unsymmetrical, optically active ligands 1,2-C(6)H(4)(PPh(2))((R,R)-2,5-dimethylphospholanyl) and the new 1,1'-Fe(C(5)H(4))(2)(PPh(2))((R,R)-2,5-dimethylphospholanyl) form complexes of the type [PtCl(2)(diphos)] and [Rh(diphos)(diene)][BF(4)]. The crystal structure of reveals that only one quadrant is blocked. Asymmetric hydrogenation of acrylic esters and enamides using and as catalysts show that the phenylene-backboned diphosphine gives a more efficient catalyst in terms of asymmetric induction than the more flexible ferrocene-backboned diphosphine. The best results, which were obtained with and enamide substrates, exceeded those obtained with Duphos catalysts. The rate of hydrogenation of the enamides with was 10 times faster than with [Rh(Duphos)(diene)][BF(4)]. A quadrant diagram can be used to predict the configuration of the major product, provided it is assumed to be derived from the less sterically congested intermediate.     

C(2)-Symmetric bis-sulfoxide: A novel chiral auxiliary for asymmetric desymmetrization of cyclic meso-1,2-diols

A new heterocyclic compound, C(2)-symmetric bis-sulfoxide 1, has been found to be an efficient chiral auxiliary for asymmetric desymmetrization of cyclic meso-1,2-diols via diastereoselective acetal fission. Both (R,R)- and (S,S)-1 are readily synthesized with high optical purity via asymmetric oxidation of 1, 5-benzodithiepan-3-one (2). After acetalization of meso-1,2-diols 6a-e and a mono-TMS ether 6f with this chiral auxiliary 1, the resulting acetals 7a-f were subjected to base-promoted acetal fission upon treatment with potassium hexamethyldisilazide (KHMDS) followed by acetylation or benzylation to give the desymmetrized diol derivatives 8a-f with high diastereoselectivity. The chiral auxiliary 1 is readily removed by acid-promoted hydrolysis and can be recovered without a loss in enantiomeric excess.     

Asymmetric synthesis of [2,3-(13)C(2),(15)N]-4-benzyloxy-5,6-diphenyl-2,3,5,6-tetrahydro-4H-oxazine-2-one via lipase TL-mediated kinetic resolution of benzoin: general procedure for the synthesis of [2,3-(13)C(2),(15)N]-L-alanine.

Lipase TL-mediated kinetic resolution of benzoin proceeded to give the corresponding optically pure (R)-benzoin (R)-1. On the other hand, (S)-benzoin O-acetate (S)-7 could be hydrolyzed without epimerization to give (S)-benzoin (S)-1 under alkaline conditions. Furthermore, both enantiomers of benzoin (1) were converted to [(15)N]-(1R,2S)- and (1S,2R)- 2-amino-1,2-diphenylethanol (3a and 3b), respectively, according to the procedure reported previously. [2,3-(13)C(2),(15)N]-(5S,6R)-4-benzyloxy-5,6-diphenyl-2,3,5,6-tetrahydro-4H-oxazine-2-one (10) was synthesized from ethyl [1,2-(13)C(2)]bromoacetate and (1R,2S)-2-amino-1,2-diphenylethanol (3b) in three steps. Finally, [2,3-(13)C(2),(15)N]-L-alanine (12) was prepared via alkylation of the lactone 10 and hydrogenation of the alkylated product 11.     

Novel C2-symmetric macrocycles bearing diamide-diester groups: synthesis and enantiomeric recognition for primary alkyl ammonium salts

We synthesized a series of novel macrocycles with diamide-diester groups (S,S)-1, (S,S)-2, (S,S)-3, and (R,R)-1, derived from dimethyloxalate and amino alcohols by high dilution technique, and evaluated enantiomeric recognition properties of these macrocycles toward primary alkyl ammonium salts by 1H NMR titration. Taking into account the host employed, important differences were observed in the Ka values of (R)-Am and (S)-Am for (S,S)-1 and (R,R)-1 hosts, KS/KR = 5.55 and KR/KS = 3.65, Delta Delta Go = 0.43 and -0.32 kJ mol-1, respectively. There seems a general tendency for the host to include the guests with the same absolute configuration.     

On the reaction of Ph2PNHPPh2 with RNCS (R=Et, Ph, p-NO2C6H4): preparation of the zwitterionic ligand EtNHC(S)Ph2P==NPPh2C(S)NEt (HSNS) and the zwitterionic metalate [(SNS)Rh(CO)

The reaction of Ph(2)PNHPPh(2) (PNP) with RNCS (Et, Ph, p-NO(2)(C(6)H(4))) gives addition products resulting from the attack of the P atoms of PNP on the electrophilic carbon atom of the isothiocyanate. When PNP is reacted with EtNCS in a 1:2 molar ratio, the zwitterionic molecule EtNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)Et (HSNS) is obtained in high yield. HSNS can be protonated (H(2)SNS(+)) or deprotonated (SNS(-)), behaving in the latter form as an S,N,S-donor pincer ligand. The reaction of HSNS with [(acac)Rh(CO)(2)] (acac=acetylacetonate) affords the zwitterionic metalate [(SNS)Rh(CO)]. Other products can be obtained depending on the R group, the PNP/RNCS ratio (1:1 or 1:2), and the reaction temperature. The proposed product of the primary attack of PNP on RNCS, Ph(2)PN==PPh(2)C(S)NHR (A), cannot be isolated. Reaction of A with another RNCS molecule leads to 1:2 addition compounds of the general formula RNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)R (1), which can rearrange into the non-zwitterionic product RNHC(S)PPh(2)==NP(S)Ph(2) (2) by eliminating a molecule of RNC. Two molecules of A can react together, yielding 1:1 PNP/RNCS zwitterionic products of the formula RNHCH[PPh(2)==NP(S)Ph(2)]PPh(2)==NP(+)Ph(2)C(S)N(-)R (3). Compound 3 can then rearrange into RNHCH[PPh(2)==NP(S)Ph(2)](2) (4) by losing a RNC molecule. When R=Et (a), compounds 1 a, 2 a (HSNS), and 4 a have been isolated and characterized. When R=Ph (b), compounds 2 b and 4 b can be prepared in high yield. When R=p-NO(2)C(6)H(4) (c), only compound 3 c is observed and isolated in high yield. The crystal structures of HSNS, [(SNS)Rh(CO)], and of the most representative products have been determined by X-ray diffraction methods.     

Achiral tetrahydrosalen ligands for the synthesis of C(2)-symmetric titanium complexes: a structure and diastereoselectivity study

Achiral tetrahydrosalen ligands have been employed in the synthesis of chiral C(2)-symmetric titanium complexes. When combined with tetrahydrosalen ligands 2a and 2b, titanium tetraisopropoxide liberated 2 equiv of isopropyl alcohol and generated the (tetrahydrosalen)Ti(O-i-Pr)(2) complexes 3a and 3b. These complexes were shown to be C(2)-symmetric by (1)H and (13)C[(1)H] NMR spectrometry and X-ray crystallography. X-ray structures of 3a and 3b indicate that the bonding of the tetrahydrosalen ligand to titanium is different than the bonding of salen ligands to titanium. Whereas salen ligands usually bind to titanium in a planar arrangement, the tetrahydrosalen is bonded with the phenoxide oxygens mutually trans. When bound in this fashion, the nitrogens of the tetrahydrosalen ligand and the titanium become stereogenic centers. The use of titanium complexes of high enantiopurity in the generation of tetrahydrosalen titanium adducts resulted in a maximum diastereoselectivity of 2:1. The diastereoselectivity obtained using chiral titanium alkoxide complexes was greater than the diastereoselectivity observed when a tetrahydrosalen ligand derived from (S,S)-trans-diaminocyclohexane was employed.     

Synthesis of C3-symmetric tris(beta-hydroxy amide) ligands and their Ti(IV) complex-catalyzed enantioselective alkynylation of aldehydes

[reaction: see text]. A series of new chiral C3-symmetric tris(beta-hydroxy amide) ligands have been synthesized via the reaction of 1,3,5-benzenetricarboxylic chloride and optically pure amino alcohols (up to 96% yield). The asymmetric catalytic alkynylation of aldehydes with these new C3-symmetric chiral tris(beta-hydroxy amide) ligands and Ti (O(i)'Pr)4 was investigated. Ligand 4c synthesized from (1R,2S)-(-)-2-amino-1,2-diphenylethanol is effective for the enantioselective alkynylation of various aldehydes, and high enantioselectivity was obtained with aromatic aldehydes and alpha,beta-unsaturated aldehyde (up to 92% ee).     

Studies on the synthesis of (2S,3R)-3-hydroxy-3-methylproline via C2-N bond formation

A new efficient synthesis of (2S,3R)-3-hydroxy-3-methylproline (3) is reported. During the course of a recent study on the Lewis acid promoted intramolecular opening of an epoxide by a carbamate NH, a highly concerted rearrangement was unexpectedly observed. Further investigations of substrate generality show that delta-carbamate-alpha,beta-epoxide esters commonly underwent similar rearrangements with the aid of Lewis acids. Retrosynthetic analysis of such a C(2)-N disconnection can lead to an efficient synthesis of (2S,3R)-3-hydroxy-3-methylproline (3) in high enantio purity. Stereochemistries were established by a Sharpless asymmetric dihydroxylation and a diastereoselective reductive amination.