An enantioselective ketene-imine cycloaddition method for synthesis of substituted ring-fused 2-pyridinones

Previously, a method for the stereoselective synthesis of beta-lactams, starting from 2H-Delta(2)-thiazolines and Meldrum's acid derivatives, has been reported from our laboratory. We now report a new method for the synthesis of optically active, highly substituted ring-fused 2-pyridinones. This was discovered when 2-alkyl-Delta(2)-thiazolines and Meldrum's acid derivatives were treated with HCl(g) in benzene at 5 --> 78 degrees C. Further refinement of the synthetic protocol revealed that use of 1,2-dichloroethane as solvent at 0 --> 64 degrees C led to the desired 2-pyridinones in good yields and with excellent enantioselectivity. Use of these conditions allowed preparation of 2-pyridinones from several different Delta(2)-thiazolines and Meldrum's acid derivatives and may be a general route to 2-pyridinones.     

A convenient synthesis of substituted pyrazolidines and azaproline derivatives through highly regio- and diastereoselective reduction of 2-pyrazolines

The synthesis of substituted N-acetyl- and N-aroyl-2-pyrazolines via intramolecular Michael addition of alpha,beta-unsaturated hydrazones generated through olefination of phosphinyl and phosphonyl hydrazones with carbonyl compounds is reported. The regioselective reduction of the C-N double bond in these 2-pyrazolines using Superhydride (Et3BHLi) gives pirazolidine derivatives with excellent levels of cis-diastereoselectivity. These 2-pyrazolines can also be obtained in one-pot reaction from allenes, hydrazides, and aldehydes; and pyrazolidines, after reduction, from allenes, hydrazides, and aldehydes. This synthetic route was developed to provide a new approach to substituted azaproline derivatives in a diastereoselective fashion.     

Amino-zinc-enolate carbometalation reactions: application to ring closure of terminally substituted olefin for the asymmetric synthesis of cis- and trans-3-prolinoleucine

The amino-zinc-enolate cyclization reaction is a straightforward route for the synthesis of 3-substituted prolines. As classical intramolecular carbometalation reactions, the applicability of the addition of zinc to a double bond was limited to a substrate in which the terminal alkene carbon was unsubstituted. Being interested in the synthesis of cis- and trans-3-prolinoleucine derivatives for our structure-activity relation (SAR) studies, we focused our effort on the preparation of these compounds by amino-zinc-enolate cyclization of terminally substituted double bonds. Herein we report that the attachment of an activating group such as cyclopropyl to the terminal olefin carbon allows the amino-zinc-enolate cyclization of a terminally substituted alkene. The reaction is stereospecific, leading to a trans-3-substituted proline derivative, whereas a cis stereochemistry was observed with the amino-zinc-enolate cyclization of terminally nonsubstituted olefins. Absolute configurations obtained for the 3-prolinoleucine were established by X-ray analysis, NMR, and optical activity comparison of the cis and trans derivatives obtained by an unambiguous pathway.     

Cascade reaction of isatins with heterocyclic ketene aminals: synthesis of imidazopyrroloquinoline derivatives

A concise and efficient route for the synthesis of highly substituted imidazopyrroloquinoline derivatives by simply refluxing a reaction mixture of different types of isatins and heterocyclic ketene aminals (HKAs) by acetic acid was developed. This method is suitable for combinatorial and parallel syntheses in drug discovery; consequently, a library of highly substituted imidazopyrroloquinoline derivatives was rapidly constructed using the present protocol.     

Efficient synthesis of 3,4-ethylenedioxythiophenes (EDOT) by Mitsunobu reaction

Using the Mitsunobu reaction as a key step, a general and efficient method for the synthesis of EDOT monomers has been developed. Novel substituted EDOTs and the first chiral derivatives were generated in high yields.     

A novel synthetic approach for the synthesis of pyridocarbazole alkaloids

The synthesis of 11‐methyl‐6H‐pyrido[4,3‐b]carbazole‐1(2H)‐one (5), which can be important for the synthesis of other pyridocarbazole alkaloids and especially 1‐substituted ellipticines, is described. Construction of the tetracyclic structure was achieved by a new route and two important precursor compounds (4a and 4b) for the synthesis of pyridocarbazole alkaloids and also many new tetrahydrocar‐bazole derivatives (7, 8, 9, 10, 11, 12, 13) were synthesized.     

Synthesis of New Azole Phosphonate Precursors for Fuel Cells Proton Exchange Membranes

Herein we present the synthesis and characterization of new phosphonate‐, bisphosphonate‐ and hydroxybisphosphonatebenzimidazole derivatives substituted at the N‐1 position and new regioisomers phosphonate‐, bisphosphonate‐, and hydroxybisphosphonatebenzotriazole derivatives substituted at N‐1 or N‐2 positions. The compounds were characterized by NMR and IR spectroscopies, and mass spectrometry (low and high resolution) allowing the assignment of their structure, including the identification of regioisomers. These new azole monomers will be precursors for a mesoporous silica host to produce novel membrane materials with high proton conductivity for intermediate temperature proton exchange membrane fuel cells.     

Design and effective synthesis of the first 4-aza-2,3-didehydropodophyllotoxin rigid aminologue: a N-methyl-4-[(3,4,5-trimethoxyphenyl)amino)]-1,2-dihydroquinoline-lactone

The first N1-alkyl-4-amino-1,2-dihydroquinoline-lactone has been prepared by a five-step sequence in a 51% overall yield via the corresponding furo[3,4-b]quinolin-1(3H)-one. A new practical synthesis of this intermediate was carried out using versatile, commercially available starting materials and constitutes the shortest and highest yielding route. These synthetic pathways could be widened with a view toward the preparation of different substituted derivatives, which could be considered as rigid aminologues of 4-aza-2,3-didehydropodophyllotoxins.     

Crown-tetrathiafulvalenes attached to a pyrrole or an EDOT unit: synthesis, electropolymerization and recognition properties

A crown-tetrathiafulvalene electroactive receptor has been covalently linked to electropolymerizable pyrrole or 3,4-ethylenedioxythiophene monomers. The synthetic route to the monofonctionalized tetrathiafulvalene (TTF) ligand has been optimized. Two derivatives of pyrrole (N- and 3-substituted) were synthesized. The various substituted monomers have been electropolymerized to produce polypyrrole (PP) and poly(ethylenedioxothiophene) (PEDOT) films bearing the electroactive TTF moiety. The electroactivity of the polymer films is efficiently controlled by the well-defined two-step redox behavior of the TTF unit. In the case of PEDOT, an alternative post-polymerization derivatization strategy has been used, involving the grafting of the crown-TTF ligand on the previously grown PEDOT backbone. Though chemical derivatization is realized under heterogeneous conditions, in the bulk of the film, this strategy proved to be particularly efficient. These electrodes constitute the first examples of conducting polymer-based modified electrodes incorporating a TTF electrochemical probe, able to interact with a guest ion, such as Ba2+. The cation recognition properties of these various electrodes have been analyzed by cyclic voltammetry and their electroactivity in water as well as their regeneration capability have been investigated.     

A new synthesis of 4-oxygenated β-carboline derivatives by Fischer indolization

A new and short synthetic route to the 4-methoxy-β-carboline skeleton is described. The route involves Fischer indolization of enehydrazine of 1-tosylpiperidine-3,5-dione and successive acetalization-elimination for aromatization of 1,2,3,4-tetrahydro-2-tosyl-9H-β-carbolin-4-one. This method is efficiently applicable to synthesis of the benzene-part substituted 4-oxygenated β-carboline derivatives.     

Chemoenzymatic synthesis of glutamic acid analogues: substrate specificity and synthetic applications of branched chain aminotransferase from Escherichia coli

A new route to alpha-keto acids is described, based on the ozonolysis of enol acetates obtained from alpha-substituted beta-keto esters. Escherichia coli branched chain aminotransferase (BCAT) activity toward a variety of substituted 2-oxoglutaric acids was demonstrated analytically. BCAT was shown to have a broad substrate spectrum, complementary to that of aspartate aminotransferase, and to offer access to a variety of glutamic acid analogues. The usefulness of BCAT was demonstrated through the synthesis of several 3- and 4-substituted derivatives.     

Novel synthesis method of ester free trimethylene carbonate derivatives

Ester free poly(trimethylene carbonate) (PTMC) derivatives show biocompatibility and biodegradability and do not generate any acidic compounds after decomposition. Their syntheses methods are limited however, hampering their material application. Herein, we established a novel synthesis route of ester free trimethylene carbonate (TMC) derivatives. The novel synthesis route was described using six aldehydes and one ketone as starting compounds. The key reaction is the selective deprotection from two protected hydroxyl groups in the cyclic acetal structure by diisobutylaluminium hydride. This novel synthesis route means that it is possible to convert aldehyde group to ether groups in the side chain of TMC. Conventionally, only a substituent derived from a primary alcohol was introduced into the side chain. We therefore succeeded in decreasing the number of reaction steps from five to three, compared with the conventional route. Furthermore, the development of a novel synthesis route enabled the introduction of substituents derived from secondary alcohols, anticipating the creation of further types of ester free TMC derivatives.     

Solvent free chemical oxidative polymerization as a universal method for the synthesis of ultra high molecular weight conjugated polymers based on 3,4-propylenedioxythiophenes

In this communication, we report on a solvent free chemical oxidative polymerization route for the monomers based on 3,4-propylenedioxythiophenes wherein the process is applicable to both solid as well as liquid monomers and results in the bulk synthesis of ultra high molecular weight polymers.     

Toward a general synthesis of chlorins

Recently, we described a new synthesis of C,D-ring symmetric chlorins 11, involving 2 + 2 condensation of bis-formyl-dihydrodipyrrins 9 with symmetrically substituted dipyrromethane diacids 10 (Method I). However, while versatile in many aspects, Method I was unsuited to the broader goal of synthesizing fully non-symmetric chlorins of general structure 15, which requires regioselective control over the reacting centers in the A,B- and C,D-ring components. In this paper, we describe four new 2 + 2 strategies that accomplish this differentiation (Methods II-V). Of these, Method V, which combines operational simplicity with moderate to high product yields, proved to be the most effective route, exploiting reactivity differences between the two formyl groups of A,B-rings 9 to impart excellent regioselectivity. Methods II-IV are also useful alternatives to Method V, although in some cases, the appropriately functionalized precursors are less readily available. All four approaches generate single regioisomers of diversely substituted chlorins, and in every case, the 2 + 2 condensation is accomplished in a simple, one-flask procedure without need for additives such as oxidizing agents or metals. Taken together, these methodologies provide expanded access to an array of chlorins for SAR studies that may advance the effectiveness of PDT and other applications.     

A general synthesis of diversely substituted indazoles and hetero-aromatic derivatives from o-halo-(het)arylaldehydes or -phenones

A set of variously substituted indazoles and hetero-aromatic derivatives were synthesized from o-halo-(het)arylaldehydes using a palladium catalyzed amination followed by cyclization. Starting from phenones, this process was extended to give 3-substituted indazoles. Moreover, N-1-substituted-indazoles can be reached by this strategy using an optional selective N-1-alkylation step during the process. This methodology offers a general and easy route for the synthesis of regioselectively substituted indazoles.     

Convenient synthesis of N1-substituted orotic acid derivatives

A convenient and efficient method for the synthesis of N1-substituted orotic acid derivatives is reported. The synthetic route utilizes substituted maleimide as synthetic intermediate and takes only four simple steps from readily available starting materials. As a result, orotic acid derivatives with various alkyl and aromatic groups at N1 can be readily synthesized.     

Further studies on silatropic carbonyl ene cyclisations: beta-crotyl(diphenyl)silyloxy aldehyde substrates; synthesis of 2-deoxy-2-C-phenylhexoses

Silatropic carbonyl ene cyclisations of beta-(allylsilyloxy)- and beta-(crotylsilyloxy)butyraldehydes are shown to proceed with high stereoselectivity but at a much reduced rate in comparison to the cyclisation of analogous alpha-substrates. In the second section, olefin cross-metathesis is explored as a route to substituted alpha-(allylsilyloxy)aldehydes and the method applied to the synthesis of diastereomeric 2-deoxy- and 2-deoxy-2-C-phenyl hexose derivatives from butanediacetal-protected D-glyceraldehyde.     

An improved and general synthesis of monomers for incorporating trityl linker groups into polystyrene synthesis supports

A straightforward synthesis of trityl alcohols in which one of the aryl rings is substituted with a vinyl group is presented. The synthesis of the alcohols involves the direct addition of the Grignard reagent prepared from 4-bromostyrene to substituted benzophenones. These compounds are used to incorporate trityl linker groups into polystyrene-based organic synthesis supports. Both non-cross-linked and cross-linked (JandaJel™) polystyrene have been prepared using these monomers.     

Efficient synthesis of functionalized 1,3-dihydroisobenzofurans from salicylaldehydes:Application to the synthesis of escitalopram

An efficient synthesis of substituted 1,3-dihydroisobenzofurans is developed. In this novel route, oaroylbenzaldehydes, as key intermediates, can be obtained by lead tetraacetate oxidation of Naroylhydrazones of salicylaldehydes. The mild and general strategy enables the synthesis of various substituted 1,3-dihydroisobenzofurans in high yields. Moreover, this method can be applied to efficiently synthesize escitalopram.     

In water organic synthesis: Introducing itaconic acid as a recyclable acidic promoter for efficient and scalable synthesis of quinoxaline derivatives at room temperature

Substituted quinoxaline derivatives are traditionally synthesized by co-condensation of various starting materials. Herein, we describe a novel environmentally benign in water synthetic route for the synthesis of structurally and electronically diverse ninety quinoxalines with readily available substituted o-phenylenediamine and 1,2-diketones using cheap and biodegradable itaconic acid as a mild acid promotor in 1 hours. The reaction is performed at room temperature, which proceeds through cyclo-condensation reaction followed by obtaining the aforesaid nitrogen-containing heterocyclic adducts without performing the column chromatography up to 96% total yields. The simplicity, high efficiency, and reusable of the catalyst merits this reaction condition as “green synthesis” which enables it to be useful in synthetic transformations upto gram scale level.