动力学催化光度法测定痕量亚硝酸根

磷酸和棉红在１００℃下反应生成天蓝色物质（λｍａｘ＝６７５ｎｍ）,该物质在痕量亚硝酸根的催化下被ＫＢｒＯ３氧化褪色,研究了反应的条件,测定了动力学参数,建立了测定痕量亚硝酸根的方法,方法检出限是４＊１０＾－１０ｇ／ｍＬ,测定范围是０．４０－２０．００μｇ／Ｌ,用于水体中痕量亚硝酸根的测定,结果满意。     

溴酸钾氧化酸性品红催化光度法测定亚硝酸根

研究了在强酸介质中亚硝酸根催化溴钾氧化酸性品红的褪色反应及其动力学条件，建立了高灵敏测定痕量亚硝酸根的新催化光度法。方法灵敏度为３．７×１０＾－１１ｇ／ｃｍ＾２亚硝酸态氮，线性范围为０．０６－０．４２μｇ／１０ｍＬ，用于测定唾液及硝钾中亚硝酸根。     

溴酸钾氧化吡罗红G催化动力学光度法测定痕量NO2^—

研究了在磷酸介质中亚硝酸根催化溴酸钾氧化吡罗红Ｇ而使褪色，建立了催化动力学光度法测定痕量亚硝酸根的新方法，测定范围为０．２－２０μｇ／ｍＬ，检出限为０．２ｎｇ／ｍｌ，用于食品和水样中的亚硝酸根测定获得满意结果。     

溴酸钾氧化吡口罗红G催化动力学光度法测定痕量NO-2

研究了在磷酸介质中亚硝酸根催化溴酸钾氧化吡口罗红Ｇ而使其褪色，建立了催化动力学光度法测定痕量亚硝酸根的新方法，测定范围为０．２～２０μｇ／ｍＬ，检出限为０．２ｎｇ／ｍＬ，用于食品和水样中的亚硝酸根测定获得满意结果     

溴酸钾氧化亮绿SF催化光度法测定痕量亚硝酸根

本文基于亚硝酸根对溴酸钾氧化亮绿ＳＦ而使其褪色所起的催化作用，建立了高灵敏度催化吸光光度法测定痕量亚硝酸根的新方法，测定范围为０．０５－２０ｎｇ／ｍｌ，用于不同水样中亚硝酸根的测定，获得了满意结果。     

溴酸钾氧化喹哪啶红催化光度法测定痕量亚硝酸根

基于亚硝酸根对酸钾氧化喹哪了啶红的催化作用，建立了双波长分光光度动力学测定痕量亚硝酸根的新方法。于４００ｎｍ测定吸不镀△Ａ１，５１０ｎｍ测定吸光度△Ａ２，以△Ａ＝△Ａ１＋△Ａ２定时。线性范围０．００４－０．１５ｍｇ／Ｌ；检出限０．００４ｍｇ／Ｌ。     

催化光度法测定痕量亚硝酸根的研究：溴酸钾—结晶紫体系

基于在稀磷酸介质中，亚硝酸根对溴酸钾氧化结晶紫的反应，具有催化作用，建立了测定痕量亚硝酸根的新催化光度法。方法检出限为８．０×１０－９ｍｇ／Ｌ，线性范围０．６～１２．０ｍｇ／２５Ｌ，回收率为９７％～１０２％。与其它方法相比，常见离子如Ｂｒ－、Ｉ－等的允许存在量大。用于地面水和地下水的测定结果满意。     

催化动力学电位法测定痕量亚硝酸根

基于稀硫酸介质中，亚硝酸根对溴酸钾氧化碘化钾有催化作用，用碘离子选择电跟踪I^-，建立了测定痕量亚硝酸根的催化动力学电位法。在适宜条件下，该指示反应为一级反应，反应速度可用电位的变化（ΔE）表示。当时间固定时，ΔE与亚硝酸根浓度在0－0．12mg/L范围内呈线性关系，检出限为2．0μg/L。该法用于水样中痕量亚硝酸根的测定，结果满意。     

催化动力学极谱法测定痕量亚硝酸根

在硫酸介质中，痕量亚硝酸根对溴酸钾氧化酸性铬深蓝的反应有极强的催化作用，研究了最佳反应条件，发现在氨缓冲溶液中酸性铬深蓝具有良好的极谱峰，以极变法监测催化反应过程中酸性铬深蓝浓度的变化，建立了催化动力学极谱法测定痕量亚硝酸根的方法，方法的线性范围为0．20－1．34μg.ml^-1，检出限为0．088μg.ml^-1，应用于雪水，雨水中痕量亚硝酸根的测定，结果满意。     

高碘酸钾氧化酚藏花红褪色催化动力学光度法测定食品中的痕量亚硝酸根

基于在硫酸介质中,亚硝酸根对高碘酸钾氧化酚藏花红褪色反应具有较强的催化作用,建立了测定痕量亚硝酸根的催化动力学光度法。线性范围为0．12～1．22mg/L,相关系数为0．9990,检出限为0．016mg／L。用于食品中痕量亚硝酸根的测定,测定结果的相对标准偏差为2、6％～4．2％,回收率为97％．103％。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.