Natural Cellulose Derived Nanocomposites as Anodic Materials for Lithium‐Ion Batteries

Bio‐inspired synthetic method provides an effective shortcut to fabricate functional nanostructured materials with specific morphologies and designed functionalities. Natural cellulose substances (e. g., commercial laboratory cellulose filter paper) possesses unique three‐dimensionally cross‐linked porous structures and abundant functional groups for the functional modification on the surfaces. The deposition of metal oxide gel film on the surfaces of the cellulose nanofibers is facilely to be achieved through the surface sol‐gel process, resulting in metal oxide replicas of the initial cellulose substance or metal‐oxide/carbon nanocomposites. Moreover, the as‐deposited metal oxide gel films coated on the cellulose fiber surfaces provide ideal platforms for the further formation of specific functional assemblies, and eventually to the corresponding nanocomposite materials. Based on this methodology, various nanostructured composites were prepared and employed as anodic materials for lithium‐ion batteries, including metal‐oxides‐based (such as SnO₂, TiO₂, MoO₃, Fe_xO_y, and SiO₂) and Si‐based composites, as summarized in this personal account. Benefiting from the unique hierarchically porous network structures and the synergistic effects among the composite components of the anodic materials, the transfer of electrons/ions is accelerated and the structural stability of the electrode is enhanced, leading to the improved lithium storage performances and promoted cycling stability.     

Large-scale synthesis and microstructure of SnO2 nanowires coated with quantum-sized ZnO nanocrystals on a mesh substrate

Large-quantity single-crystal SnO(2) nanowires coated with quantum-sized ZnO nanocrystals (nc-ZnO/SnO(2) nanowires) were directly synthesized by thermal evaporation of SnO powder and a mixture of basic ZnCO(3) and graphite powders. A common stainless steel mesh was used to collect the products. The microstructure and possible growth mechanism of the nc-ZnO/SnO(2) nanowires were investigated. Results showed that tetragonal structured SnO(2) nanowires were obtained, whose surfaces were coated with single-layer ZnO nanocrystals with an average diameter of less than 5 nm. The nanowires had cross-rectangle section with width-to-thickness aspect ratio ranging from 2:1 to 5:1. The lengths of the nanowires were several tens of micrometers. ZnO nanocrystals were single crystalline wurtzite structures, which coated the whole nanowires and distributed uniformly. The possible growth mechanism of the composite nanowires may be enucleated that Zn atoms in the source vapor will replace the Sn atoms on the surface of the formed SnO(2) nanowires due to the higher reducibility of Zn than Sn. Two strong Raman scattering peaks at 626 and 656 cm(-1) appeared in the micro-Raman spectrum of nc-ZnO/SnO(2) nanowires. The origins of the peaks were discussed. Most importantly, the method can be extended to other composite oxide nanowires that are synthesized by oxidizing two kinds of metals, such as high reducibility elements Mg, Al, Zn, and Ti, and low reducibility elements In, Ge, Ga, etc.     

Edge plane sites on highly ordered pyrolytic graphite as templates for making palladium nanowires via electrochemical decoration

An approach for the fabrication of metal nanowires is presented. Palladium wires with diameters less than 50 nm were produced by electrochemical decoration of step edge sites on the surface of highly ordered pyrolytic graphite via the following three steps. First an electrochemical activation step was used to oxidize the edge plane sites on highly ordered pyrolytic graphite surfaces in 0.5 M Na(2)SO(4). Second, a potential cycling step in a 1 mM PdCl(2) solution in 0.1 M H(2)SO(4) was used to form palladium oxide (s) and/or complexes of Pd on the step edges. Third, Pd nanowires were formed by electroreduction after transfer of the graphite to 0.1 M H(2)SO(4). The resulting wires showed a high degree of uniformity. A merit of this approach is that it allowed metal nanowires to be fabricated without the simultaneous formation of nanoparticles on the basal plane terraces, in contrast to other studies of this type. The mesoscopic palladium wires are shown to be useful for the electrochemical sensing of hydrazine.     

Partitioning and assembly of metal particles and their bioconjugates in aqueous two-phase systems

The behavior of metal nanospheres and nanowires and their bioconjugates in aqueous two-phase systems (ATPS) is described. The ATPS used in this work comprised poly(ethylene glycol) (PEG), dextran, and water or aqueous buffer. Au and Ag nanospheres less than 100 nm in diameter partition between the PEG-rich and dextran-rich phases on the basis of their surface chemistry and can be separated on this basis. Larger Au nanospheres and wires accumulate at the interface between the two aqueous phases. The influence of polymer molecular weight and concentration on interfacial assembly of Au wires is described. DNA-derivatized nanowires at the aqueous/aqueous interface retain the ability to selectively bind to fluorescent complementary DNA. In addition, Au nanoparticles have been bound to Au wires via selective DNA hybridization at the ATPS interface. Transmission electron microscopy and thermal denaturation experiments confirm that DNA-driven assembly is responsible for the formation of the nanosphere/wire assemblies. These results demonstrate the biocompatibility of the two-phase interface and point to future use as scaffolding in biorecognition-driven assembly.     

Moving beyond molecules: patterning solid-state features via dip-pen nanolithography with sol-based inks

Herein, we described a new dip-pen nanolithography (DPN)-based method for the direct patterning of organic/inorganic composite nanostructures on silicon and oxidized silicon substrates. The approach works by the hydrolysis of metal precursors in the meniscus between an AFM tip and a surface according to the reaction 2MCln + nH2O --> M2On + 2nHCl; M = Al, Si, and Sn. The inks are hybrid composites of inorganic salts with amphiphilic block copolymer surfactants. Three proof-of-concept systems involving Al2O3, SiO2, and SnO2 nanostructures on silicon and silicon oxide surfaces have been studied. Arrays of dots and lines can be written easily with control over feature size and shape on the sub-200 nm level. The structures have been characterized by atomic force microscopy, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray analysis. This work is important because it opens up the opportunity for using DPN to deposit solid-state materials rather than simple organic molecules onto surfaces with the resolution of an AFM without the need for a driving force other than chemisorption (e.g., applied fields).     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using an inorganic particle matrix for small molecule analysis

Fine metal or metal oxide powder as an alternative to conventional organic matrices in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) has been utilized successfully for lower molecular mass analytes, poly(ethylene glycol) 200 (PEG 200) and methyl stearate. Eleven kinds of particle, Al, Mn, Mo, Si, Sn, SnO2, TiO2, W, WO3, Zn and ZnO, were evaluated. The analyte was mixed with a metal or metal oxide powder (inorganic matrix) with particle diameter of tens of micrometers and liquid dispersant, followed by application to the sample target. Using a commercial MALDI-TOFMS instrument equipped with an internal 337 nm pulsed nitrogen laser, the analytes, PEG 200 and methyl stearate, were ionized as the alkali metal ion adducted molecules [M+Na]+ or [M+K]+ when the inorganic matrices Mn, Mo, Si, Sn, TiO2, W, WO3, Zn or ZnO were used. In the case of an Al matrix, PEG 200 was ionized as [M+K]+, whereas methyl stearate was ionized as [M+H]+ and [M+Al]+. These particles have potential as the matrix for MALDI. During our examination, however, only SnO2 particles did not ionize either PEG 200 or methyl stearate. Based on our protocol, when TiO2 powder was suspended with liquid paraffin, PEG 200 and methyl stearate gave their MALDI-TOF mass spectra with the lowest background noise and highest intensity. TiO2 powder seemed to be a broad potential matrix for low molecular mass polar or non-polar analytes. The results suggested that bulk particles caused rapid heating/vaporization processes and ionized analyte molecules under irradiation with a pulsed UV laser. The present method can be readily applied to obtain the low background noise MALDI-TOF mass spectra of small-sized compounds.     

Bulk Nanostructuring of Janus-Type Metal Electrodes

The stable deposition of reactive nanostructures on metal electrodes is a key process for modern technologies including energy conversion/ storage, electrocatalysis or sensing. Here a facile, scalable route is reported, which allows the bulk nanostructuring of copper foam electrodes with metal, metal oxide or metal hydroxide nanostructures. A concentration-gradient driven synthetic approach enables the fabrication of Janus-type electrodes where one face features Cu(OH)₂ nanowires, while the other face features CuO nanoflowers. Thermal or chemical conversion of the nanostructured surfaces into copper oxide or copper metal is possible whilst retaining the respective nanostructure morphologies. As proof of concept, the functionalized electrodes are promising in electrocatalytic water oxidation and water reduction reactions.     

Creating mixed Fe/Al coatings on planar gamma-Al2O3 surfaces

Insufficient understanding of the interactions of reactive phases (e.g., Fe and Al oxides) with minerals, other reactive phases and sorbing species has made predicting and modeling metal sorption on natural sediment surfaces difficult. This work develops a method to create mixed Fe/Al planar oxide surfaces by coating well-characterized planar gamma-Al2O3 with ferric iron. The objective is to closely control the Fe/Al ratio as well as the distribution of Fe on the planar surface. Effects of starting Fe(III) concentration, reaction time and number of coating sequences were examined using XPS and ToF-SIMS. No observable trend was seen in Fe/Al ratios by varying the starting Fe(III) concentration or reaction time. For both 4- and 14-day reactions, lower concentrations of Fe(III) produced oxide phases with a homogeneous distribution of Fe at the surface as detected by ToF-SIMS. ToF-SIMS Fe elemental maps of the oxide phases resulting from the highest Fe(III) concentration showed areas of localized Fe deposition. A sequential coating procedure allowed for a closer control of the concentration and spatial distribution of Fe(III) in the resulting oxide phase. This work provides methodology that can be used to create Fe/Al oxide phases whose Fe/Al content can be controlled for use in subsequent sorption studies to better understand the effects of mixed phase oxides on metal ion uptake.     

Self-assembly and oligomerization of alkyne-terminated molecules on metal and oxide surfaces

We report the self-assembly and subsequent oligomerization of organic molecules based on terthiophenes bearing a terminal alkyne moiety. Molecules with thioacetate and phosphonic acid functional groups were synthesized, enabling molecular self-assembly on metal (Au and Pd) and metal oxide [Al(2)O(3), HfO(2), and indium tin oxide (ITO)] surfaces, respectively. The molecules were assembled from solution and then oligomerized using either 2,5-norbornadiene-rhodium(I) chloride dimer or UV light. UV-vis and infrared absorption spectroscopies and electrochemical techniques show that the molecules assemble to form dense monolayers on the substrate surfaces and oligomerize under the action of a catalyst or UV light.     

Elastomeric nanoparticle composites covalently bound to Al2O3/GaAs surfaces

This article reports the modification of Al2O3/GaAs surfaces with multifunctional soft materials. Siloxane elastomers were covalently bound to dopamine-modified Al2O3/GaAs semiconductor surfaces using MPt (M = Fe, Ni) nanoparticles. The sizes of the monodisperse FePt and NiPt nanoparticles were less than 5 nm. The surfaces of the nanoparticles as well as the Al2O3/GaAs substrates were modified with allyl-functionalized dopamine that utilized a dihydroxy group as a strong ligand. The immobilization of the elastomers was performed via a hydrosilation reaction of the allyl-functionalized dopamines with the siloxane backbones. X-ray photoelectron spectroscopy (XPS) experiments confirmed the covalent bonding of the siloxane elastomers to the oxide layer on the semiconductor surface. Fourier transform-infrared reflection absorption spectroscopy (FT-IRRAS) measurements revealed that the allyl functional groups are bonded to the siloxane backbones. The FT-IRRAS data also showed that the density of the allyl groups on the surface was lower than that of the siloxane backbones. The mechanical properties of the surface-bound nanocomposites were tested using nanoindentation experiments. The nanoindentation data showed that the soft matrix composed of the elastomeric coating on the surfaces behaves differently from the inner, hard Al2O3/GaAs substrate.     

Nanocomposites and macroscopic materials: assembly of chemically modified graphene sheets

Self-assembly of chemically modified graphenes (CMGs), including graphene oxide (GO), reduced graphene oxide (RGO) and their derivatives, has emerged as one of the most appealing strategies to develop unprecedented graphene-based functional materials. With the assistance of various non-covalent forces such as hydrogen bonding, ionic, amphiphilic and π-π interactions, CMGs decorated with multiple functional groups are favorable for assembly with different organic and inorganic components which can result in hierarchical composites possessing unique structures and functions. In this review, we will summarize the state-of-the-art self-assembly strategies that have been established to construct CMG based nanomaterials, including nanoparticles, nanospheres, nanofibers, nanorods, nanosheets, and macroscopic thin films, fibers and porous networks. The driving forces involved in the self-assembly process will be elucidated in the context. Further, we will also highlight several representative examples of applications regarding the self-assembled CMG based materials.     

Static SIMS studies of fatty alcohols,amines and esters on gold and aluminium–magnesium alloy surfaces

Static secondary ion mass spectrometry was used to study the chemical reactions and lateral distributions of fatty amines, alcohols and esters spin coated onto gold surfaces and commercial aluminium–magnesium (Al–Mg) alloy surfaces, cleaned using UV–ozone. The aim of this study is to develop an understanding of the interactions of model lubricants with metal surfaces, such as gold and aluminium. This static SIMS study of organic thin films has been able to identify specific reaction products on the aluminium surface for each functional group. This work demonstrates that organic molecules with alcohol, ester and amine functional groups undergo specific chemical reactions with oxidized Al–Mg alloy surfaces. For example, films composed of the fatty alcohol dodecanol were observed to emit monomers, dimers and trimers with discrete distributions. In addition, negative secondary ion mass spectra indicate that a surface carboxylate is formed from the alcohol. The formation of carboxylate reaction products was confirmed by Fourier transform infrared spectroscopy. On Al–Mg alloy surfaces, a direct interaction with the amine and aluminium oxide surface is observed by the detection of a molecular ion that corresponds to the mass of dodecylamine and AlO^?, characteristic of aluminium oxide. Ethyl laurate was shown to eliminate the ethyl group, leaving the laurate anion. This study demonstrates the ability of time‐of‐flight (ToF) SIMS to discriminate and detect chemical reaction products formed between model lubricant molecules and metal surfaces. As a result of this study, the use of ToF‐SIMS to identify reaction products of model lubricants can be extended to provide a better understanding of the interactions of lubricants and metal surfaces at high temperatures and pressures that more closely resemble the conditions encountered in industrial rolling processes. Copyright © 2005 John Wiley & Sons, Ltd.     

Metallized nanotube polymer composites via supercritical fluid impregnation

Although many metal decorated nanotubes and nanowires appear in the literature, well‐dispersed metal decorated nanotube polymer composites have rarely been reported because of the excessive density mismatch between the decorated nanotubes and polymer matrix. Here, we report a novel method to prepare well‐dispersed, highly functional, metallized nanotube polymer composites (MNPCs) that possess remarkably improved electrical conductivity and mechanical toughness. The MNPCs are prepared by supercritical fluid impregnation of an organometal compound into a premade well‐dispersed single wall carbon nanotube‐polymer composite film. The infused precursor preferentially migrates towards the nanotubes to undergo spontaneous reduction and form nanometer‐scale metal particles leading to an increase in the conductivity of the MNPC films. The environmentally friendly supercritical fluid impregnation process significantly improved the toughness of the composite films, regardless of the presence of metal. Additional functionality can be imparted into the resulting MNPC by infusing other precursors such as magnetic and catalytic metal compounds. © 2011 Wiley Periodicals, Inc.* J Polym Sci Part B: Polym Phys, 2012     

Fabricating and aligning pi-conjugated polymer-functionalized DNA nanowires: atomic force microscopic and scanning near-field optical microscopic studies

We report a simple method to functionalize DNA with pi-conjugated polymer, forming highly aligned and integrated arrays of pi-conjugated polymer nanowires of a few nanometers diameter. pi-conjugated polymer, polyphenazasiline, having alkylammonium salts on the N atom (PPhenaz-TMA), synthesized in this study can be directly attached to DNA, which can be organized along stretched and aligned DNA molecules on surfaces as a template. Furthermore, PPhenaz-TMA/DNA nanowires were stretched and aligned on surfaces, even when PPhenaz-TMA/DNA complexes formed in solutions. The resulting PPhenaz-TMA/DNA nanowires could be easily converted to oxidized states or metallic nanowires by using adequate oxidant or metal salts. The direct visualization of PPhenaz-TMA/DNA nanowires and its structural changes have been studied by atomic force microscopy and scanning near-field optical microscopy.     

Cross-Linked Polyphosphazene Hollow Nanosphere-Derived N/P-Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction

Heteroatom-doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template-free approach to construct cross-linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P-doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m² g⁻¹). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co-N₂P₂) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom-containing polymer nanospheres and their derived single metal atom doped carbon catalysts.     

Protein-sheathed SWNT as a versatile scaffold for nanoparticle assembly and superstructured nanowires

One dimensional (1D) nanostructures have many possible applications in electronic, optical, and sensing devices associated with their nanosized lateral dimensions. In this regard, a general and bottom-up strategy to synthesize 1D nanoparticle arrays and conductive nanowires with a facile structural/compositional control is highly desired. We herein report a protein-sheathed single walled carbon nanotube (SWNT) that satisfies the criteria for an ideal template to assemble micron-long gold nanoparticle (AuNP) linear arrays with high structural rigidity. The resulting AuNP array has minimized inter-particle gaps, which is especially useful to template the overgrowth of Ag, Pd, and Pd/Ag metals into continuous nanowires (Au@M, M=Ag, Pd, Ag/ Pd). Our method successfully overcomes the incompatibility between carbon and metal materials, and the resulting superstructured metal nanowires have a tunable diameter below 100 nm and a shape closely replicating a SWNT. The Ag nanowires are composed of coalesced Au@Ag coreshell nanoparticles, while the Pd and Pd/Ag nanowires are made of very fine Pd nanocrystallites around the AuNP cores. These unique structural features are pivotal to various applications including surface enhanced Raman scattering (SERS), electrocatalysis, and gas sensors.     

Premodified Surface Method to Obtain Ultra‐Highly Dispersed Metals and their 3D Structure Control on an Oxide Single‐Crystal Surface

Precise control of the three‐dimensional (3D) structure of highly dispersed metal species such as metal complexes and clusters attached to an oxide surface has been important for the development of next‐generation high‐performance heterogeneous catalysts. However, this is not easily achieved for the following reasons. (1) Metal species are easily aggregated on an oxide surface, which makes it difficult to control their size and orientation definitely. (2) Determination of the 3D structure of the metal species on an oxide powder surface is hardly possible. To overcome these difficulties, we have developed the premodified surface method, where prior to metal deposition, the oxide surface is premodified with a functional organic molecule that can strongly coordinate to a metal atom. This method has successfully provided a single metal dispersion on an oxide single‐crystal surface with the 3D structure precisely determined by polarization‐dependent total reflection fluorescence X‐ray absorption fine structure (PTRF‐XAFS). Here we describe our recent results on ultra‐high dispersions of various metal atoms on TiO₂(110) surfaces premodified with mercapto compounds, and show the possibility of fine tuning and orientation control of the surface metal 3D structures.     

Nanotubes and nanowires

Synthesis and characterization of nanotubes and nanowires constitute an important part of nanoscience since these materials are essential building units for several devices. We have prepared aligned carbon nanotube bundles and Y-junction nanotubes by the pyrolysis of appropriate organic precursors. The aligned bundles are useful for field emission display while the Y-junction nanotubes are likely to be useful as nanochips since they exhibit diode properties at the junction. By making use of carbon nanotubes, nanowires of metals, metal oxides and GaN have been obtained. Both the oxide and GaN nanowires are single crystalline. Gold nanowires exhibit plasmon bands varying markedly with the aspect ratio. GaN nanowires show excellent photoluminescence characteristics. It has been possible to synthesise nanotubes and nanowires of metal chalcogenides by employing different strategies.     

Metal Oxide/Graphene Composites for Supercapacitive Electrode Materials

Graphene composites with metal or metal oxide nanoparticles have been extensively investigated owing to their potential applications in the fields of fuel cells, batteries, sensing, solar cells, and catalysis. Among them, much research has focused on supercapacitor applications and have come close to realization. Composites include monometal oxides of cobalt, nickel, manganese, and iron, as well as their binary and ternary oxides. In addition, their morphological control and hybrid systems of carbon nanotubes have also been investigated. This review presents the current trends in research on metal oxide/graphene composites for supercapacitors. Furthermore, methods are suggested to improve the properties of electrochemical capacitor electrodes.     

Depositional characteristics of metal coating on single-crystal TiO2 nanowires

Ultralong single-crystalline TiO(2) nanowires were prepared by a simple, low-cost solvothermal process. Silver nitrate, neodymium chloride, ceric nitrate, stannic chloride hydrate, and cadmium chloride were used as metal sources and deposited by reduction on the surface of TiO(2) nanowires. The composites were subsequently characterized by transmission electron microscopy, and their coverage was compared. The nature of the coatings on the TiO(2) nanowires varies from metal to metal. A novel approach on modified one-dimensional nanostructures with metal coating was developed, which has great potential applications in catalysts, sensors, and nanoscale devices.