Fullerene‐Crown Ether Coated Piezoelectric Crystal Liquid Chromatographic Detector for Metal Ions and Polar/Nonpolar Organic Molecules

Fullerene(C60)‐dibenzo‐16‐crown‐5‐oxyacetic acid (DBI6C5‐OCH₂‐COOC₆₀) was prepared and applied as the coating material on piezoelectric quartz crystals for detection of various metal ions and polar/nonpolar organic molecules. The C60‐crown ether‐coated piezoelectric crystal sensor with a home‐made computer interface for signal acquisition and data processing was applied as an ion chromatographic (IC) detector for various metal ions, e.g., alkali metal, alkaline earth metal and transition‐metal ions. The piezoelectric detector exhibited quite good sensitivity of 10⁴ ～ 10⁶ Hz/M and good detection limit of 10^?3 ～ 10^?4 M for these metal ions. The C60‐crown ether piezoelectric detector compared well with the commercial conductivity detector conventionally used for metal ions. The ionic size and ionic charge seemed to have significant effect on the frequency response of the piezoelectric detector. The C60‐crown ether coated piezoelectric crystal sensor was also employed as a high performance liquid chromatographic (HPLC) detector for various polar organic molecules with frequency responses in the order: amines > carboxylic acids > alcohols > ketones. Furthermore, nonpolar organic molecules, e.g., n‐hexane, 1‐hexene and 1‐hexyne, were also detected with this piezoelectric crystal detector. The frequency responses of the piezoelectric crystal detector for these nonpolar organic molecules were in the following order: alkynes > alkenes > alkanes. The effects of solvents and flow rate on the frequency responses of the piezoelectric crystal detector were investigated. The C60‐crown ether coated piezoelectric crystal detector also showed short response time (< 1 min.) and good reproducibility.     

Adsorption behavior of metal ions onto a bovine serum albumin (BSA) membrane monitored by means of an electrode-separated piezoelectric quartz crystal.

The interaction between metal ions and bovine serum albumin (BSA) was studied by using a piezoelectric quartz crystal (PQC) arranged in the electrode-separated configuration. A silanized surface of the PQC was coated with a BSA membrane via a coupling reaction with glutaraldehyde. The frequency shifts obtained from PQC coated with a BSA membrane suggested that various kinds of metal ions could be adsorbed onto the BSA membrane from aqueous solutions containing a low concentration of metal ions (2 or 10 micromol dm(-3)), only when the BSA was denatured with an alkaline solution. Anionic species of Pt(IV) and Au(III) were adsorbed onto the denatured BSA membrane from an acetic acid solution at pH 2.2, and cationic species of Cd(II), Zn(II), Co(II), Ni(II), Cu(II), and Ag(I), and cations, such as Ca2+, Ba2+, and Mg2+, were adsorbed from ammonia buffer at pH 9.5, whereas Al(III), Cr(III), Fe(III), Hg(II), and Pb(II) were hardly adsorbed. The adsorption mechanisms of these metal ions are discussed, based on the electrostatic interaction between the metal ions and the denatured BSA membrane, and complex formation between the metal ions and amino acid residues of the denatured BSA. Further, the PQC coated with a denatured BSA membrane was applied to the determination of Pt and Cd, using large frequency shifts for Pt(IV) and Cd(II).     

Determination of lead in solution with a piezoelectric quartz crystal coated with copper oleate

Copper(II) oleate was coated on a piezoelectric quartz crystal, and the copper removed by passing EDTA solution. The remaining coating reacted with aluminium, copper(II), iron(III) and lead ions in a flowing acidic solution, to form absorbed compounds which changed the frequency of the crystal. Lead (3–40 μM) could be determined at pH 5.5–5.8 with good reproducibility. Interfering metal ions (Al³⁺, Cu²⁺, Fe³⁺) were masked with acetylacetone.     

Piezoelectric Crystal Membrane Chemical Sensors Based on Fullerene and Macrocyclic Polyethers

Various reusable and sensitive piezoelectric (PZ) quartz crystal membrane sensors with home‐made computer interfaces for signal acquisition and data processing were developed to detect organic/inorganic vapors and organic/inorganic/biologic species in solutions, respectively. Fullerene(C60), fullerene derivatives and artificial macrocyclic polyethers, e.g., crown ethers and cryptands, were synthesized and applied as coating materials on quartz crystals of the PZ crystal sensors. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic or inorganic species onto coating material molecules on the crystal surface. The crown ether‐coated PZ crystal gas detector exhibited high sensitivity with a frequency shift range of 10–340 Hz/(mg/L) for polar organic gases, a short response time (< 2.0 min.), good selectivity, and good reproducibility. The Ag(I)/crptand22 and Ru(III) / crptand22 coated PZ gas detectors were also prepared for nonpolar organic vapors, e.g., alkynes and alkenes. The frequency shifts of the nonpolar PZ sensors were in the order: alkynes > alkenes > alkanes. A Ti(IV)/Cryptand22‐coated PZ crystal sensor was also developed to detect the inorganic air pollutants, e.g., CO and NO₂. A piezoelectric gas sensor for both polar/nonpolar organic vapors based on C60‐cryptand22 was also prepared. The cryptand22‐coated PZ gas sensor was also employed as a GC detector for organic molecules. The cryptand22‐coated piezoelectric GC detectors compared well with the commercial thermal conductivity detector (TCD). The interaction between fullerene C60 and organic molecules was studied with a fullerene coated PZ gas detector. A multi‐channel PZ organic gas detector with PCA(Principal Component Analysis) and BPN (Back Propagation Neural) analysis methods was developed. Various liquid piezoelectric crystal sensors based on long‐chain macrocyclic polyethers, e.g., C₁₀H₂₁‐dibenzo‐16‐crown‐5, C₁₈H₃₇‐benzo‐15‐crown‐5, (C₁₇CO)₂‐cyptand22 and fullerene derivatives, e.g., C60‐NH‐cryptand22 and dibenzo‐16‐crown‐5‐C60, were also developed as HPLC detectors for metal ions, anions, and various organic compounds in solutions. The sensitive and highly selective PZ bio‐sensors based on enzymes, polyvinylaldehyde, polycinnaldehyde‐C60 and C60‐cryptand22 were developed to detect various biologic species, e.g., proteins, glucose, and urea. A quite sensitive EQCM (Electrochemical Quartz Crystal Micro‐balance) detection system was also developed for detection of trace heavy metal ions.     

Effect of hydrolyzable metal cations on the coagulation between hexadecane and mineral particles

Mutual coagulation tests were conducted between hexadecane droplets (with and without doping with 0.001 mol/L sodium oleate) and micrometer-sized quartz, kaolinite, and illite particles in the presence and absence of multivalent hydrolyzable metal cations. It was observed that while hexadecane did not coagulate with quartz particles in the entire pH range tested (from 3 to 11), the presence of multivalent metal ions significantly increased the mutual coagulation between the hexadecane and quartz. And this only happened when the pH was raised to the level where first-order metal hydroxyl species and/or metal hydroxides were formed. The implications of this mutual coagulation for bitumen liberation from Alberta oil sands are discussed.     

Behaviour in solution of piezoelectric quartz crystals coated with poly(vinylpyridines). Application to the determination of copper(II)

Poly(2-vinylpyridine) or poly(4-vinylpyridine) coated on a piezoelectric quartz crystal adsorbed copper, thus decreasing the oscillation frequency. The bound copper could be removed by EDTA solution. Poly(4-vinylpyridine) is recommended to determine copper (5–35 μM) in a maleate buffer at pH 6.6 flowing over the coated crystal for 5 min. Iron(III) and cadmium interfered.     

Determination of volatile organic compounds using piezosensors modified with the Langmuir-Blodgett films of calix[4]resorcinarene

A sensor based on a piezoelectric quartz resonator modified with the Langmuir-Blodgett (LB) films of calix[4]resorcinarene is proposed for the detection of volatile organic compounds. Parameters for the formation of ordered LB films based on calix[4]resorcinarene were optimized, and the effects of the pH and metal ion content of the subphase on the behavior of the Langmuir monolayers of calix[4]resorcinarene were studied. The effects of the number of monolayers in a sensor coating, the pH of the subphase from which the monolayers were transferred, and the presence of copper ions in the subphase on the response of the resulting piezoelectric quartz sensors to the vapors of various volatile organic compounds (ethanol, benzene, toluene, ethylbenzene, ethyl acetate, acetone, hexane, and cumene) were studied. It was found that the proposed sensor was characterized by a short response time and reproducible measurements.     

基于金属离子螯合的压电免疫传感器新型固定化方法

提出了一种基于金属离子螯合作用的压电免疫传感器新型固定化方法. 先在压电石英晶振表面沉积正丁胺等离子体聚合膜(BA-PPF), 再在BA-PPF表面修饰可与金属离子螯合的氨三乙酸基团, 用金属铜离子活化后, 修饰了二乙三胺五乙酸基团的IgG抗体蛋白质分子即可螯合固定于BA-PPF上. 将固定了抗体的压电石英传感器用于正常人免疫球蛋白IgG (NHIgG)的测定, 其频率响应与NHIgG浓度在0.36～63.8 μg/mL范围内存在良好的线性关系. 这种新型压电免疫传感器固定化方法简单快速, 具有良好的通用性.     

Piezoelectric Crystal Liquid Flow Detection Systems Based on Alkyl (C18)‐Benzo‐15‐Crown 5 for Organic Compounds and Metal Ions

A water in soluble long‐chain crown ether alkyl (C18)‐benzo‐15‐crown‐5 was synthesized and applied as a coating material on quartz crystal membranes of a liquid flow piezo electric crystal sensor. The oscillating crown ether‐coated piezo electric (PZ) crystal with a home‐made computer inter face was prepared as a liquid chromato graphic (LC) detector for organic species and metal ions in aqueous solutions. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic molecules or metal ions on crown ether molecules. Effects of functional group, molar mass, steric hindrance, and polarity of organic molecules on frequency responses of the crown ether coated PZ crystal detector were investigated. The frequency responses of the crown ether coated PZ crystal detector for various molecules were in the order: amines > carboxylic acids > alcohols > ketones. The crown ether PZ detector also exhibited good sensitivity for some heavy metal ions and the frequency shifts were in the order: Cr³⁺ » Pb²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Cu²⁺. The crown ether coated piezo electric crystal LC detector demonstrated low detection limits for various polar organic molecules, e.g., 6.0 × 10^?5 M for propylamine, and metal ions, e.g., 2.9 × 10^?5 M (1.8 ppm) for Cu²⁺; the crown ether PZ detector also gave good reproducibility when re used. A quite sensitive electrochemical quartz crystal microbalance (EQCM) detection system was also set‐up for detecting trace heavy metal ions in solutions. The variation in frequency of the PZ crystal and the diffusion current were observed simultaneously after the reduction in heavy metal ions such as Cu²⁺ and Ni²⁺. The EQCM detection system exhibited fairly good sensitivity, e.g., 112 Hz/ppm for Cu²⁺ and a good detection limit, e.g., 0.13 ppm for Cu²⁺ ions. Comparison between EQCM and PZ detection systems was made and discussed.     

Preparation and application of cryptand-coated piezoelectric crystal gas-chromatographic detector

A re-usable and sensitive cryptand-22-coated quartz-crystal membrane piezoelectric sensor with a homemade computer interface for signal acquisition and data processing was prepared and applied as a gas-chromatographic (GC) detector for various organic molecules. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic molecules on cryptand-22. Effects of functional group, molar mass, steric hindrance and polarity of organic molecules on frequency responses of the cryptand-coated piezoelectric crystal detector were investigated. The cryptand-coated piezoelectric crystal GC detector had demonstrated high sensitivity for various polar organic molecules and good reproducibility when re-used. The frequency responses of the cryptand-coated crystal for various molecules were in the following order: carboxylic acids (RCOOH)primary amines (R-NH₂)>alcohols (ROH)>secondary amines (R₂NH)>tertiary amines (R₃N)>ketones. More polar molecules exhibited better frequency responses. The effect of temperature and amount of coating on the frequency responses of cryptand-coated crystal GC detector were also investigated. The cryptand-coated piezoelectric crystal GC detector compared well with the commercial thermal conductivity detector (TCD).     

Adsorption studies of dodecylamine at the quartz interface using an electrode-separated piezoelectric sensor

The adsorption process of dodecylammonium chloride (DAC) from aqueous solutions onto a quartz crystal interface was investigated in situ using an electrode-separated piezoelectric sensor (ESPS). Increasing amounts of DAC adsorbed onto a quartz crystal surface resulted in linearly decreasing oscillating frequencies of the ESPS. The adsorption density can be monitored by the frequency decrease. The adsorption density obtained by calculation using the Sauerbrey equation in the ESPS method is greater than that in solution depletion method. A calibration coefficient is added into the Sauerbrey equation to correct the influence of surface roughness of the quartz crystal on the adsorption density. The influence of solution properties on the adsorption density measurement was discussed. A dependence of the adsorption density on pH was reported. Received: 17 April 1997 / Revised: 1 December 1997 / Accepted: 7 December 1997     

Adsorption studies of dodecylamine at the quartz interface using an electrode-separated piezoelectric sensor

The adsorption process of dodecylammonium chloride (DAC) from aqueous solutions onto a quartz crystal interface was investigated in situ using an electrode-separated piezoelectric sensor (ESPS). Increasing amounts of DAC adsorbed onto a quartz crystal surface resulted in linearly decreasing oscillating frequencies of the ESPS. The adsorption density can be monitored by the frequency decrease. The adsorption density obtained by calculation using the Sauerbrey equation in the ESPS method is greater than that in solution depletion method. A calibration coefficient is added into the Sauerbrey equation to correct the influence of surface roughness of the quartz crystal on the adsorption density. The influence of solution properties on the adsorption density measurement was discussed. A dependence of the adsorption density on pH was reported. Received: 17 April 1997 / Revised: 1 December 1997 / Accepted: 7 December 1997     

Piezoelectric Quartz Crystal Anti‐Protein Immunosensors Based on Immobilized Fullerene C60‐Proteins

Various fullerene C60‐proteins such as C60‐myoglobin (C60‐Mb), C60‐hemoglobin (C60‐Hb) and C60‐gliadin, coated piezoelectric quartz crystals were prepared and applied in piezoelectric quartz crystal immunosensors for protein‐antibodies such as anti‐myoglobin (Anti‐Mb), anti‐hemoglobin (Anti‐Hb) and anti‐gliadin respectively. The immobilizations of myoglobin, hemoglobin and gliadin onto Fullerene C60 were studied with a C60‐coated piezoelectric crystal detection system, respectively. The partially irreversible frequency responses for theses proteins were observed by a desorption study, implying that C60 can strongly adsorb these proteins. Thus, immobilized C60‐Mb, C60‐Hb and C60‐gliadin coating materials were successfully prepared and identified with FTIR spectrometry. The C60‐Mb, C60‐Hb and C60‐gliadin coated piezoelectric (PZ) quartz crystal immunosensors with homemade computer interfaces for signal acquisition and data processing were developed and applied for detection of Anti‐Mb, Anti‐Hb and anti‐gliadin respectively. The C60‐protein coated PZ immunosensors for Anti‐Mb, Anti‐Hb and antigliadin exhibited linear frequency responses to the concentrations of theses anti‐proteins with sensitivities of 1.43 × 10³, 2.59 × 10³ and 8.05 × 10³ Hz/(mg/mL) respectively. The detection limits of these PZ‐immunosensors were 4.36 × 10^?3, 3.23 × 10^?3 and 1.98 × 10^?3 mg/mL for Anti‐Mb, Anti‐Hb and anti‐gliadin respectively. Effects of pH and temperature on the frequency responses of the anti‐protein PZ‐immunosensors were also investigated. The optimum pH of these anti‐proteins and the optimum temperature for the PZ‐immunosensors were observed at pH = 7 and around 30 °C respectively. The interferences of various common species in human blood, e.g., cysteine, tyrosine, urea, glucose, ascorbic acid and metal ions, to these anti‐protein PZ‐immunosensors were also investigated respectively. These species showed nearly no interference or quite small interference with the anti‐protein PZ‐immunosensors. The reproducibility and lifetime of these immobilized C60‐protein coated PZ crystal immunosensors were also investigated and discussed.     

溶菌酶在裸金电极和疏基乙酸或正十二疏烷基醇修饰电极上的吸附

电化学石英晶体阻抗系统;疏基乙酸;溶菌酶在裸金电极和疏基乙酸或正十二疏烷基醇修饰电极上的吸附     

Gravimetric monitoring of adsorption behavior of tetrakis(methylpyrdiniumyl)porphyrin onto quartz crystal surface using an electrode-separated piezoelectric sensor

The adsorption behavior of 5,10,15,20-tetrakis (4-N-methylpyridiniumyl)-porphyrin (H₂TMPyP) from aqueous solutions onto a quartz crystal interface was investigated in situ using an electrode-separated piezoelectric sensor (ESPS). With H₂TMPyP adsorbed onto quartz crystal surface of the ESPS, its oscillating frequency decreases linearly with increasing adsorption amount. The adsorption densities obtained in the ESPS method were greater than those determined in a solution depletion method. The influence of surface roughness of quartz crystal and bulk solution properties on the measurement of adsorption density in the ESPS method was discussed.     

A non-potentiometric sensing method for the determination of pentoxyverine with PQC sensors based on ion-pair complexes.

The construction and general performance characteristics of three piezoelectric quartz crystal sensors responsive to the pentoxyverine are described here. This kind of non-potentiometric sensing method is based on use of ion-pair complexes of the pentoxyverine cation with three counter anions, namely, tungstophosphate, tetraphenylborate and picrolonate. The complexes were embedded in a PVC matrix. Adsorption of the pentoxyverine ion on the complex caused a frequency decrease of the crystal. The frequency decrease was proportional to the amount of adsorbed analyte. The influencing factors were investigated in detail, and then optimized. The proposed sensors exhibit reasonable selectivity and a higher sensitivity than the potentiometric sensors. For a sensor modified with pentoxyverine-phosphotungstate, the calibration graph was linear over concentration of 1.0 x 10(-7) - 5.0 x 10(-5) M with a detection limit of 6 x 10(-8) M at pH 5.4.     

Determination of silver in solution with a piezoelectric detector after electrodeposition

Silver in solution is determined in situ by frequency change of a piezoelectric quartz crystal due to electrodeposition on the electrode of the crystal immersed in the solution. A test solution containing EDTA for masking other metal ions flows through a thermostated cell which contains the crystal with platinum-plated electrodes. The frequency change is proportional to the silver concentration in the range 10^?6?3 × 10^?5 M after electrodeposition for 10 min, and 2 × 10^?7?1 × 10^?6 M for 1 h.     

Comparison of stages in oil agglomeration process of quartz with sodium oleate in the presence of Ca(II) and Mg(II) ions

The oil agglomeration of quartz with sodium oleate in the presence of calcium and magnesium ions comprises three consecutive stages: adsorption of cations onto quartz surfaces, which leads to coagulation of the suspension, shear flocculation with sodium oleate and finally, agglomeration of flocs by kerosene. The effects of pH and cation concentration on these stages were investigated and the results were presented comparatively. It was found that all the stages of oil agglomeration of quartz exhibited sharp dependences on pH and cation concentration. That is, these stages generally took place in the pH and concentration ranges in which hydroxy complexes of the cations existed in the suspension. In the case of magnesium ion, the coagulation, shear flocculation and especially oil agglomeration of quartz improved after precipitation of hydroxide. These species of calcium and magnesium ions formed at high pH were adsorbed on the negatively charged surface of quartz, as a result of which the adsorption of sodium oleate became possible and thus the shear flocculation of the particles was achieved. Thereafter, the hydrophobic quartz flocs could be agglomerated by kerosene as bridging liquid. The increase in the shear flocculation efficiency depending on the increase of surface hydrophobicity enhanced the oil agglomeration of quartz with kerosene. The maximum recoveries for all the stages of the quartz were obtained in the presence of 10(-3) M magnesium and 5x10(-3) M calcium ions at pH 11. However, some differences in the behavior of shear flocculation and oil agglomeration of quartz suspension were observed above 10(-3) M concentration of magnesium ion.     

Soft mechanochemical synthesis: Preparation of cathode materials for rechargeable lithium batteries

To prepare intercalation lithium — transition metal oxide cathode materials for rechargeable lithium batteries, the reactions in the mixtures of the correspondent hydroxides in highly energetic planetary activators, so called ‘soft mechanochemical synthesis’ were studied. The method can be used for direct preparation of final products in a high dispersed and disordered state, as well as for obtaining high reactive precursors yielding final products by the subsequent brief heating at considerably lower temperatures as compared to conventional ceramic method. The as prepared products were analyzed using X-ray diffraction, TG, IRS, XPS, ⁷Li NMR, EPR, diffuse reflectance spectroscopy, electron microscopy, BET, and electrochemical measurements. The peculiarities of crystal structure, electronic state of transition metal ions and cycling behaviour of materials are discussed. The method as proposed is concluded to be economically effective and ecologically clean.     

The quantification of sodium in mineral waters using a quartz crystal microbalance

A sensor for sodium based on a piezoelectric quartz crystal is proposed. The quartz crystal was coated with 5% of bis[(12-crown-4)methyl] dodecylmethylmalonate, 33% of PVC and 62% of NPOE to which KTpClPB in a 22% molar proportion to the ionophore was added. Coating amounts producing a frequency decrease around 18 kHz show optimum linear calibration ranges for the analysis of sodium in commercial mineral waters. Besides sensitivity, coating stability and selectivity of the sensor over other cations were adequate for those analyses. The results obtained analysing commercial mineral waters by the proposed method are not significantly different (α=0.05) from the ones obtained by atomic spectrometry.