Comparison of segmentors for liquid-liquid extraction flow-injection analysis

The segmentation of two immiscible solvents in a continuous liquid—liquid extraction flow system has been studied with a computer-controlled photometric detection system (resolution time 3 msec). The T-shaped segmentors tested were made of fluoroplastic, glass (A4-T fitting) and a modified glass (A8-T fitting). The modified A8-T fitting gave the most repeatable segmentation (rsd 2%).     

Simple and rapid flow-injection spectrophotometric determination of carbaryl after liquid-liquid extraction

A simple procedure was developed for the spectrophotometric determination of carbaryl and its hydrolysis product 1-naphthol in water. These compounds are extracted into xylene and back-extracted, as the 1-naphtholate, with 0.2 M NaOH. A 600-μl volume of the alkaline extract is injected into a flow analysis manifold which provides the reaction between naphtholate and 50 μg ml⁻¹ p-aminophenol solution in the presence of 0.004 M KIO₄ and spectrophotometric measurement is carried out at 596 nm. The method provides a limit of detection of 26.5 ng ml⁻¹ carbaryl and a sample frequency of 110 injections per hour. Recoveries in different types of matrices vary from 95 to 102%.     

Determination of nitrate and nitrite by continuous liquid-liquid extraction with a flow-injection atomic-absorption detection system

Summary A flow injection system coupled on-line with a continuous liquid-liquid extractor is used for the indirect determination of nitrate and nitrite with an atomic-absorption detection system. These anions form ion-pairs with the copper(I)-neocuproine chelate which are extracted into methyl-isobutyl-ketone, the atomic-absorption signal of copper from the organic phase being proportional to the nitrate or nitrite concentration. The methods proposed herein are suitable for determining nitrate or nitrite at the g ml^–1 level with a sampling frequency of 35 ± 5 h^–1. The methods compare favourably with their batch counterparts with regard to sensitivity, selectivity, sample volume and sampling frequency.

---

Bestimmung von nitrat und nitrit durch kontinuierliche flüssig-flüssig-extraction mit detektion durch ein fließinjektions-AAS-system

Zusammenfassung Ein Fließinjektionssytem, das on-line mit einem Flüssig-Flüssig-Extraktor gekoppelt ist, wird zur indirekten AAS-Bestimmung von Nitrat und Nitrit benutzt. Diese Anionen bilden mit Kupfer(I)-neocuproinchelat Ionenpaare, die mit Methylisobutylketon extrahiert werden. Das AAS-Signal des Kupfers aus der organischen Phase ist der Nitrat- bzw. Nitritkonzentration proportinal. Die vorgeschlagenen Verfahren eignen sich zur Nitrat- oder Nitritbestimmung im g/ml-Bereich mit einer Probenfrequenz von 35 ± 5 je Stunde. Diese Methoden sind den Batch-Verfahren in bezug auf Empfindlichkeit, Selektivität sowie Probevolumen und -frequenz überlegen.

     

Direct automatic determination of polyphenols in olive oils in the aqueous phase of a flow-injection liquid-liquid extraction system without phase separation

A method for the determination of polyphenols in olive in which the analytes are extracted into the aqueous phase by a liquid-liquid extraction system based on the use of a flow-injection configuration with iterative change of the flow direction is proposed. None of the typical units for this continuous separation technique are required by the proposed configuration. The analytes can be determined in the range over which polyphenols normally occur in these samples (100–900 μg ml^?1) with better precision (2.8–4.0% vs. 6%) and sampling frequency (28 h^?1 vs. 0.5 h^?1) and sample (< 1 g vs. 30 g) and reagent consumption than by the conventional method.     

Design and application of a new phase separator for flow injection liquid-liquid extraction

A new versatile phase separator for flow injection solvent extraction has been designed and its analytical performance investigated. Manifolds for various instrumentation and the corresponding operating procedures have been established. Experimental results show that the newly designed phase separator possesses several advantages over the existing ones, such as long term stability, robustness, sufficient phase separation and integral in situ collection of the solvent extracts at different phase flow rate ratios. The detection limits for cobalt, gold, iodide, iron, lead, nickel, nitrate and tungsten were 1.4, 0.45, 70, 1.9, 160, 0.9, 137 and 23 ng ml⁻¹, and the relative standard deviations 2.5, 1.3, 2.2, 2.9, 4.8, 3.6, 1.4 and 3.3%, respectively.     

Optimization of a liquid-liquid extraction method for HPLC-DAD determination of penicillin-V in human plasma

Optimization of a liquid-liquid extraction procedure used for isolation of penicillin-V in human plasma samples and the subsequent HPLC-DAD analysis are reported. Some aspects related to the stability of penicillin-V in plasma and according to pH are also given. From seven tested solvents, the highest extraction yield was obtained with methyl-t-buthyl ether. Influence of the extraction parameters, such as pH of aqueous phase, sample/solvent volumetric ratio, and extraction duration, is discussed. HPLC separation was achieved on an Eclipse XDB-C8 column, using a mobile phase composed by aqueous phosphate buffer (pH=7.3), methanol and acetonitrile in the ratio 8:1:1. Quantitation limits of 50 ng/ml were obtained. The optimal sample preparation method and HPLC-DAD separations were used for a bioequivalence study, made on 36 volunteers.     

Design and properties of a flow-injection analysis cell using potassium-selective ion-sensitive field-effect transistors as detection elements

The combination of flow-injection analysis (FIA) and chemically modified ion-sensitive field-effect transistors (CHEMFETs) is described. In a wall-jet cell, two identical potassium-selective CHEMFETs were used for a differential measurement using a platinum (pseudo-)reference electrode. Silicone-rubber membrane materials, chemically bound to the SiO₂ gate oxide, were used with valinomycin as the ionophore. The optimized FIA system showed a linear response of 56 mV per decade for potassium concentrations above 5 × 10^?5 M. Preliminary results of potassium determinations in human serum and urine samples are presented.     

Indirect atomic absorption spectrometric determination of perchlorate by liquid-liquid extraction in a flow-injection system

The determination is based on the continuous liquid-liquid extraction of the copper(I)/6-methylpicolinealdehyde azine/perchlorate ion-pair into 4-methyl-2-pentanone in a flow-injection manifold. The organic fills a loop of an injector situated in an integrated feed system of an atomic absorption spectrometer. Measurement of the copper atomic absorption signal from the organic phase allows the indirect determination of 0.5–5 μg ml^?1 perchlorate, giving a 3-fold increase in sensitivity over the conventional spectrophotometric method. The detection limit is 70 ng ml^?1. The sampling frequency is 45 ± 5 h^?1. The method is highly selective, and has been used for the determination of perchlorate added to serum and urine samples.     

Using on-line solid phase extraction for flow-injection spectrophotometric determination of salbutamol

In the proposed procedure, the determination of salbutamol with Folin-Ciocalteau reagent (FC) using a flow injection analysis technique (FIA) with spectrophotometric detection at 750 nm is described. The lab-made FIA system consisted of a peristaltic pump Gilson Minipulse 3 equipped with Tygon tubes, double 6-port external Vici Valco sample injector and S 2000/SAD500 fiber optic spectrophotometer. It was controlled by a PC with use of originally compiled LabVIEW^®—supported software containing the mathematical library with various statistical functions for off-line data evaluation. Concentration, volume of reagents and flow rate were optimised by a simplex method. The proposed system was used for the direct determination of salbutamol sulphate in the tablets and the human urine without preliminary pre-treatment of the sample. The negative effect of interfering substances (excipients of the tablets and matrix of the urine) is overcome by a solid phase extraction (SPE), when salbutamol is adsorbed on the solid phase in the microcolumn, which is integrated directly into the flow system. Pre-treatment of the sample takes place directly in the flowing stream. The sample throughput without carryover of on-line SPE was 60-80 samples per hour. With the SPE column (Baker—carboxylic acid), salbutamol was determined in the linear range from 1 to 15 μg ml⁻¹ (R.S.D.=1.2%), with detection limit (3σ) 0.1 μg ml⁻¹ and a frequency of 40-60 samples per hour in the water solutions. The salbutamol was determined in the linear range from 2 to 20 μg ml⁻¹ (R.S.D.=1.7%), with detection limit (3σ) 1 μg ml⁻¹ and a frequency of 30 samples per hour in the samples of the human urine.     

Chemiluminescence determination of vitamin B12 by a flow-injection method

Chemiluminescence analysis with flow injection was used for the determination of vitamin B₁₂ by means of the luminol-hydrogen peroxide system. The linear range is three orders of magnitude and the detection limit is 1 ng for 50-μ1 samples injected. The results were compared with those obtained by a spectrophotometric method.     

Molecularly imprinted solid-phase extraction and flow-injection chemiluminescence for trace analysis of 2,4-dichlorophenol in water samples

Highly sensitive flow-injection chemiluminescence (CL) combined with molecularly imprinted solid-phase extraction (MISPE) has been used for determination of 2,4-dichlorophenol (2,4-DCP) in water samples. The molecularly imprinted polymer (MIP) for 2,4-DCP was prepared by non-covalent molecular imprinting methods, using 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EGDMA) as the monomer and cross-linker, respectively. 2,4-DCP could be selectively adsorbed by the MIP and the adsorbed 2,4-DCP was determined by its enhancing effect on the weak chemiluminescence reaction between potassium permanganate and luminol. The enhanced CL intensity was linear in the range from 1 × 10⁻⁷ to 2 × 10⁻⁵g mL⁻¹. The LOD (S/N = 3) was 1.8 × 10⁻⁸g mL⁻¹, and the relative standard deviation (RSD) was 3.0% (n = 11) for 1.4 × 10⁻⁶g mL⁻¹. The proposed method had been successfully applied to the determination of 2,4-DCP in river water. Figure Effect of 4-VP content on the ultraviolet spectrum of 2,4-DCP in chloroform     

Flow injection manifolds for liquid-liquid extraction without phase separation assisted by ultrasound

Flow injection (FI) manifolds based on iterative change of the flow direction have been designed to study the influence of auxiliary energy on continuous liquid-liquid extraction without phase separation and compare it with the non-assisted process in a single experiment. In order to demonstrate the utility of ultrasounds as auxiliary energy for the extraction of polyphenols from an organic phase, the approach has been applied to samples of extra virgin olive oil, using an alkaline aqueous phase as extractant and subsequent derivatization with the Folin-Ciocalteu reagent. The proposed method provides results similar to those from the official method-recoveries between 97 and 100%. The sensitivity of the proposed method is 3.5 times higher than that of the non-ultrasound-assisted method. The precision, expressed as relative standard deviation (R.S.D.) for n=5, was within 1-5% and the relative errors for the irradiated and non-irradiated method were within 3 and 5%, respectively. The repeatability and within-laboratory reproducibility, studied at two concentration levels (379 and 813 μg ml⁻¹) ranged between 0.7-4.4% and 0.6-4.8%, respectively. The proposed manifolds can also be applied to either other type of auxiliary energies—microwave, thermal—or two different types of auxiliary energies at the same time.     

Determination of gold in ore by flame atomic absorption spectrometry with flow-injection on-line sorbent extraction preconcentration

Gold in ores was determined by flame atomic absorption spectrometry following on-line preconcentration by sorbent extraction in a flow-injection system. The medium polarity adsorption resin Amberlite XAD-8 packed in a 220-μl micro-column was used to collect gold(III) from hydrochloric acid sample solutions for 40 s at 7.6 ml/min. Ethanol was used to elute the adsorbed analytes into the nebulizer. Optimization studies were made on sample loading rate, elution rate and sample acidity. Some possible interferences on the determination are discussed. A 35-fold enrichment was achieved at a sampling frequency of 60 h^?1 and with an RSD of 1.4%. The detection limit (3σ) and 2 μg l^?1. Results for gold in ore samples showed good agreement with those obtained using activated carbon adsorption preconcentration. The recoveries were 97–108%.     

Speciation of hexavalent chromium in waters by liquid-liquid extraction and GFAAS determination

Diperoxo chromium oxide is produced by reaction of hydrogen peroxide on chromium(VI). Diperoxo chromium creates a complex with ethyl acetate, while chromium(III) remains in an unchanged form in the aqueous phase. By this means chromium(VI) can be extracted into ethyl acetate from the aqueous phase. The optimal conditions of Cr(III)-Cr(VI) separation, as well as the chromium content of the ethyl acetate phase were determined with graphite furnace atomic absorption spectrometry. In the second extraction of Cr(VI) from ethyl acetate back into water phase an additional preconcentration of chromium(VI) can be carried out. The detection limit (3σ) of the developed method found to be 200 ng dm^− 3 for the first extraction and 50 ng dm^− 3 after using the twofold extraction. In consequence of the matrix free ethyl acetate phase after the first extraction, with this separation a really extensive preconcentration of chromium(VI) can be realized.     

流动注射结合化学发光法测定没食子酸

基于没食子酸与铬 (Ⅵ )的氧化还原反应 ,产生的铬 (Ⅲ )催化鲁米诺 H2 O2 化学发光体系的研究 ,结合流动注射技术 ,优化反应条件 ,建立了一种高灵敏度的快速测定没食子酸的新方法。方法的线性范围为 2 .0× 1 0 - 9～ 5 .0× 1 0 - 6g/mL ,检出限为 1 .2× 1 0 - 9g/mL ,对 1 .0× 1 0 - 7g/mL的没食子酸进行了 1 1次平行测定 ,相对标准偏差为 2 .1 %。方法成功地用于健民咽喉片中没食子酸的测定。     

Response surface methodology for the optimisation of flow-injection analysis with in situ solvent extraction and fluorimetric assay of tricyclic antidepressants

A semiautomatic extraction-fluorimetric method for the determination of tricyclic antidepressant drugs (TCAs) based in the formation of ion pairs with 9,10-dimethoxyanthracene-2-sulphonate (DMAS) has been developed. The aqueous solutions of the TCAs (imipramine, desipramine, amitriptyline, nortriptyline, clomipramine or doxepine) are injected into a carrier composed by DMAS in an acid medium and the ion pair formed is extracted into dichloromethane where the fluorescence is measured. An experimental design (Central Composite Design) together with the Response Surface Methodology has been used to find the optimal instrumental FIA and chemical variables. We have considered as the response function the product of the peak height by the sampling frequency. The calibration curves were linear over the working range (0.25-3.00 mg L⁻¹). The limits of detection were lower than 0.30 mg L⁻¹. The method has been satisfactorily applied to the determination of imipramine, amitriptyline, clomipramine and doxepin in pharmaceutical preparations.     

A continuous liquid-liquid extraction system coupled on-line with capillary gas chromatography for environmental and ecotoxicological analysis

The applicability of a liquid-liquid extraction system which is coupled on-line with a capillary gas chromatograph was studied for environmental and ecotoxicological analyses. The optimized and automated system was used for the determination of apolar and rather non-volatile organic compounds in aqueous samples. Relevant aspects of sample introduction, phase separation and selection of extraction solvent are discussed. Three routine-tipe applications are described, viz. an improved method for the determination of hexachlorocyclohexanes in ground water and the determination of the so-called NCC-ether and ACC-ether in ecotoxicological studies. Depending on the application studied, the concentration levels varied from 0.1 to 6000 μg/I, using ECD and/or FID detection. Typical coefficients of variation obtained with the total extraction–GC procedure were 2–25%. The system was found to be rugged, it saves time compared with set-ups involving off-line liquid-liquid extraction and considerably reduces the manual work load.     

Photochemical derivatization and fluorimetric determination of reserpine in a flow-injection assembly

The fluorimetric flow-injection determination of reserpine was achieved with the drug being derivatized on-line by photoreaction. PTFE tubing was helically coiled around a germicide lamp located between the injection valve and detector. Two analytical procedures are proposed using either dilute acetic acid or pure methanol as the carrier stream. The influence of foreign compounds was studied and the method was applied to the determination of reserpine in pharmaceutical formulations.     

Determination of mercury in saliva with a flow-injection system

A simple, fast and reliable method, with a low detection limit, has been developed for the determination of total mercury in saliva samples. The method uses a brominating reagent, followed by on-line addition of KMnO₄ at room temperature to convert organically bound mercury to inorganic mercury ions, and determines mercury by flow-injection cold-vapour atomic absorption spectrometry. Using the method described, complete recoveries of five mercury compounds from saliva were attained. Results obtained on real samples using the new method were comparable to that obtained using the established method with batch system. The detection limit of this method, based on three standard deviations of the blank, is 0.05 μg l⁻¹ Hg in a saliva sample of 500 μl. A sample throughput of 80 measurements per hour is possible with the method. The calibration curves are linear up to 20 μg l⁻¹ and the dynamic range extends to 40 μg l⁻¹ Hg. At a concentration of 1μg l⁻¹ mercury in saliva, the relative standard deviation is about 2% for 11 replicates; a total volume of 0.5 ml saliva is required for three replicates.