A novel biamperometric biosensor for urinary oxalate determination using flow-injection analysis

A biosensor for determination of oxalate concentration in urine has been developed by immobilisation of oxalate oxidase and peroxidase on the surface of an interdigitated gold electrode. Enzyme immobilisation was performed using BSA and glutaraldehyde. Biamperometric measurements were made in flow conditions both in aqueous oxalate solutions (tested concentration range between 50 μM and 10 mM) and in real urine samples (tested measuring range between 5 and 100 μM). Optimal working conditions were examined for flow-injection analysis, and good correlation was achieved between added oxalate quantity and the one measured by biosensor in urine matrix (R² = 0.9983). The influence of some interferences (ascorbic acid, uric acid, paracetamol, acetylsalicylic acid) was also studied using biamperometric measurement mode.     

Multicommutation in flow analysis. Part 3. Spectrophotometric kinetic determination of creatinine in urine exploiting a novel zone sampling approach

Zone sampling performed on a single analytical channel and associated with the stopped-flow approach was proposed and applied to the spectrophotometric kinetic determination of creatinine in urine based on Jaffé's reaction. The flow network comprised microcomputer controlled three-way solenoid valves. With multicommutation, the potentialities of zone sampling and stopped-flow were expanded, and the design of the flow set up was simplified. Influence of the main related parameters such as system configuration, reagent concentrations, temperature and timing were studied. The proposed system handled about 24 samples per hour. Baseline drift was not observed during extended operation periods (8 h). Sample pretreatment was not required. Results were reproducible (R.S.D. < 3%) and in agreement with those obtained in a batch procedure.     

流动注射化学发光法快速测定尿液中左亚叶酸钙

在碱性介质中, 左亚叶酸钙对鲁米诺-K3Fe(CN)6体系有显著的增敏作用, 据此, 建立了一种简单、快速测定左亚叶酸钙的流动注射化学发光新方法. 在优化的实验条件下, 该法测定左亚叶酸钙的线性范围为5.0×10-8～1.0×10-5 g/mL; 检出限(3σ)为2.0×10-8 g/mL; 对浓度为1.0×10-6 g/mL的样品进行11次平行测定, 相对标准偏差为1.3%. 将此法用于尿液中左亚叶酸钙的测定, 同时进行回收率实验.     

Spectrophotometric determination of catecholamines with metaperiodate by flow-injection analysis

A flow-injection Spectrophotometric method for the determination of adrenaline and isoprenaline, based on the reaction with metaperiodate, is described. The calibration graphs are linear up to 2 × 10⁻⁴ M. Flow injection allows the measurement of 120 samples per hour. The method was successfully applied to the determination of both catecholamines in pharmaceuticals.     

Enzymatic determination of l-lysine by flow-injection techniques

An enzymatic assay that is highly selective for l-lysine, based on flow-injection techniques combined with spectrophotometric detection, is presented. l-Lysine-α-oxidase (E.C. 1.4.3.14) from Trichoderma viride and horseradish peroxidase were used in a coupled enzyme assay. Peroxide produced in the first reaction was converted by peroxidase with phenol and 4-aminoantipyrine to a quinoneimine dye detectable at 500 nm. An analytical enzyme reactor filled with coimmobilized enzymes was incorporated in the flow-injection system. The assay has a measuring frequency of 30 samples h^?1 and a response time of less than 2 min. To adapt the assay to high concentrations of l-Lysine and to minimize interferences, the injected sample volume was reduced to 2 μ-l, resulting in a linearity range of 1–16 mM l-lysine with a sensitivity of 6–7 mV 1 mmol^?1, a limit of detection (3σ) of 1 mM and a reproducibility of 0.5% (repetitive injection of a 10 mM l-lysine sample). The enzyme cartridge is stable for several months and thousands of measurements.     

Flow-injection system for the fluorimetric determination of fructose with an immobilized mannitol dehydrogenase reactor

Immobilized mannitol dehydrogenase is used for the determination of D-fructose in a flow-injection system. The enzyme is immobilized on poly(vinyl alcohol) beads. The oxidation of NADH occurs simultaneously and the disappearance of NADH is measured fluorimetrically. The response is linearly related to fructose concentration in the range 6–600 μM; 30 samples per hour can be analysed. The immobilized enzyme retains over 80% of its initial activity after repetitive use for 2 months.     

Creatinine determination in urine samples by batchwise kinetic procedure and flow injection analysis using the Jaffé reaction: chemometric study

The classical Jaffé reaction for the determination of creatinine in urine samples is tested. A comparative study of the main analytical characteristics focussed to minimize the bias error and improve the precision, for the batchwise and flow injection (FI) methods is realized. Also, the effect of the albumin concentration in the determination of creatinine has been studied. Different analytical signals were studied. Absorbance increments at different times permit to estimate the creatinine concentration free from bias error in urine by the batchwise method using the calibration graph obtained with creatinine standards and no measurement of the blank solution is needed. The lineal interval was 0.92–50 mg l⁻¹ and seven samples can be processed per hour by an operator. No previous treatment of the urine sample is necessary. The FI method provides also good results. The lineal interval was 30–100 mg l⁻¹ and the sample rate was around 20 samples per hour. If increased albumin levels are detected in the urine, standard addition method or the calibration graphs with standards in presence of albumin are needed in order to obtain accurate results when FI method is employed. The obtained accuracy of the both methods allows its application as diagnostic tool to establish the urinary creatinine levels.     

流动注射结合化学发光法测定没食子酸

基于没食子酸与铬 (Ⅵ )的氧化还原反应 ,产生的铬 (Ⅲ )催化鲁米诺 H2 O2 化学发光体系的研究 ,结合流动注射技术 ,优化反应条件 ,建立了一种高灵敏度的快速测定没食子酸的新方法。方法的线性范围为 2 .0× 1 0 - 9～ 5 .0× 1 0 - 6g/mL ,检出限为 1 .2× 1 0 - 9g/mL ,对 1 .0× 1 0 - 7g/mL的没食子酸进行了 1 1次平行测定 ,相对标准偏差为 2 .1 %。方法成功地用于健民咽喉片中没食子酸的测定。     

A flow-based procedure with solenoid micro-pumps for the spectrophotometric determination of uric acid in urine

The determination of uric acid in urine shows clinical importance, once it can be related to human organism dysfunctions, such as gout. An analytical procedure employing a multicommuted flow system was developed for the determination of uric acid in urine samples. Cu(II) ions are reduced by uric acid to Cu(I) that can be quantified by spectrophotometry in the presence of 2,2′-biquinoline 4,4′-dicarboxylic acid (BCA). The analytical response was linear between 10 and 100 μmol L^− 1 uric acid with a detection limit of 3.0 μmol L^− 1 (99.7% confidence level). Coefficient of variation of 1.2% and sampling rate of 150 determinations per hour were achieved. Per determination, 32 μg of CuSO₄ and 200 μg of BCA were consumed, generating 2.0 mL of waste. Recoveries from 91 to 112% were estimated and the results for 7 urine samples agreed with those obtained by the commercially available enzymatic kit for determination of uric acid. The procedure required 100-fold dilution of urine samples, minimizing sample consumption and interfering effects. In order to avoid the manual dilution step, on-line sample dilution was achieved by a simple system reconfiguration attaining a sampling rate of 95 h^− 1.     

Trace and ultratrace analysis methods for the determination of phosphorus by flow-injection techniques

Trace (≤1 mg/l or 30 μM) and ultratrace (≤1 μg/l or 30 nM) analysis methods for phosphorus determination by flow-injection analysis are reviewed. Most of the methods cited in this review are fundamentally based on the reaction of orthophosphate with molybdate to form heteropoly acids, such as molybdenum yellow and molybdenum blue, and some of the methods are based on the formation of such secondary reactions as ion associates and their aggregates with bulky cations, such as cationic dyes and quaternary ammonium ions. The heteropoly acids themselves can be measured by spectrophotometry, and the ion associate formed with a cationic dye, Malachite Green (MG), can be measured based on the coloration of MG. Light scattering detection methods can be used for measuring the aggregates of ion associates formed with bulky cations. Highly sensitive detection of phosphorus can be accomplished by fluorophotometry; Rhodamine B (RB) and its analogues react with molybdophosphate to form ion associates, which shows fluorescence quenching of RB: LOD is about 5 nM. The detection method based on the chemiluminescence of luminal oxidized with molybdophosphoric acids is probably the most sensitive of all the detection methods reported so far: LOD of the method is as low as 1 nM. The LOD of the molybdenum blue method can be improved by using a liquid core waveguide: LOD is 0.5 nM.     

Chemiluminometric -lysine determination with immobilized lysine oxidase by flow-injection analysis

An enzymatic flow-injection procedure for the determination of -lysine was developed. A lysine oxidase reactor is combined with a fibre-optic hydrogen peroxide detector. Hydrogen peroxide detection is based on the peroxidase-catalysed luminol reaction. The chemiluminescent light is detected by a photomultiplier. -Lysine can be determined in the range 10–1000 μM. A sampling rate of up to 90 h⁻ can be achieved. The whole sensing assay works for more than 1 month. The double logarithmic graph of the peak signal height vs. the lysine concentration is linear, the slope being larger than unity (r² = 0.991, n = 4).     

Simultaneous determination of oxalate, thiosulfate, and thiocyanate in urine by ion-exclusion chromatography with electrochemical detection

Summary A sensitive ion-exclusion chromatographic method has been developed for determination of oxalate, thiosulfate, and thiocyanate. The method is based on separation of these anions on a polymethacrylate-based, weakly acidic cation-exchange resin (TSKgel OApak-A) and detection by means of a glassy carbon (GC) electrode electrochemically modified with polyvinylpyridine (PVP), palladium, and iridium oxide (PVP/Pd/IrO₂). The electrochemical behavior of oxalate, thiosulfate, and thiocyanate at this chemically modified electrode (CME) have been investigated by cyclic voltammetry. The results indicated that electrocatalytic oxidation of these anions by the electrode was efficient and that the sensitivity, stability, and lifetime of the electrode were relatively high. Combined with ion-exclusion chromatography the PVP/Pd/IrO₂ electrode was used as the working electrode for amperometric detection of these anions. All linear ranges were over two orders of magnitude and detection limits, defined asS/N=3, were 9.0×10⁻⁷ mol L⁻¹ for oxalate, 6.7×10⁻⁷ mol L⁻¹ for thiosulfate, and 5.6×10⁻⁷ mol L⁻¹ for thiocyanate. Correlation coefficients were all>0.998. Coupled with microdialysis sampling the method has been successfully applied to the determination of oxalate, thiosulfate, and thiocyanate in urine.     

Selective detection in flow analysis based on the combination of immobilized enzymes and chemically modified electrodes

The combination of immobilized enzymes and amperometry to build selective detection devices in flow-injection analysis and liquid chromatography is described. The pros and cons of enzyme electrodes and of immobilized enzyme reactors are discussed. The paper concentrates on the use of immobilized dehydrogenases, oxidases, peroxidases, and on electrodes on which these enzyme reactions can be selectively followed. The work in the field by the authors is reviewed.     

Spectrofluorimetric determination of diquat by manual and flow-injection methods

A reliable, highly sensitive and selective method is described for the determination of the herbicide diquat in different materials. It involves the formation of a stable radical obtained by reduction of diquat with sodium dithionite. The radical is a very fluorescent species (φ_F=0.37), and there is a linear relationship between diquat concentration and fluorescence intensity over the range 3–900 μg l^?1. The limit of detection is 0.4 μg l^?1. The method can be successfully adapted as a flow system using a two-channel manifold, the peak height being proportional to the diquat concentration over the range 18–4000 μg l^?1. Manual and flow-injection methods were successfully applied to the determination of diquat in commercial herbicides, waters, potatoes, flowers and soils. Both procedures were also been applied to the determination of diquat in serum and urine without prior preparation of the samples and with good results.     

流动注射化学发光法测定佐米曲谱坦

在碱性条件下,佐米曲谱坦对鲁米诺-K3[Fe(CN)6]化学发光体系有较强的抑制作用,据此建立了佐米曲谱坦的流动注射化学发光分析法。该法的化学发光抑制值ΔI与佐米曲谱坦质量浓度在2.0×10-6~1.2×10-4g/mL范围内,呈良好的线性关系,检出限为7.6×10-7g/mL。对2.5×10-5g/mL佐米曲谱坦测定的相对标准偏差为1.2%(n=11)。方法适用于佐米曲谱坦片中佐米曲谱坦的测定。     

流动注射化学发光法测定那格列奈

在碱性介质中,那格列奈对Luminol-H2O2体系的化学发光有很强的抑制作用,据此建立了流动注射化学发光抑制法测定那格列奈的新方法.该法的化学发光抑制值△I与那格列奈的质量浓度在2.0×10-8～1.0×10-6 g/mL范围内,呈良好的线性关系,检出限为1.4×10-8 g/mL;对4.0×10-7 g/mL那格列奈连续进行11次平行测定,相对标准偏差为1.0%;通过对荧光光谱的研究,对机理进行了初步探讨.     

Chemiluminescence determination of vitamin B12 by a flow-injection method

Chemiluminescence analysis with flow injection was used for the determination of vitamin B₁₂ by means of the luminol-hydrogen peroxide system. The linear range is three orders of magnitude and the detection limit is 1 ng for 50-μ1 samples injected. The results were compared with those obtained by a spectrophotometric method.     

Indirect ultraviolet determination of silver with nickelocyanide ion by flow injection analysis

A flow-injection method for the ultraviolet spectrophotometric determination of silver, based on its reaction with nickelocyanide ion, Ni(CN)²⁻₄, in ammoniacal buffer medium (pH 10) and subsequent measurement of the decrease in the absorption of the Ni(CN)²⁻₄ complex at 275 nm is described. The calibration graph is linear in the range 10–400 μm silver. At a sampling rate of about 60 samples h⁻¹ with 35 μl sample injections, precision was about 1% relative standard deviation. The proposed method was successfully applied to the determination of silver in some common silver minerals.     

Sunflower leaves tissue-based bioelectrode with amperometric flow-injection system for glycolic acid determination in urine

A novel plant tissue-based bioelectrode obtained by incorporating sunflower (Helianthus annuus L.) leaves tissue as a source of glycolate oxidase and peroxidase into a ferrocene-mediated carbon paste electrode for the determination of glycolic acid was developed. It was coupled with the flow-injection (FI) system and used as the basis to develop a novel FI amperometric procedure for glycolic acid determination. The flow-injection amperometric measurements were performed by injecting aliquot of glycolic acid solution into the flowing stream of 0.05 mol L⁻¹ of phosphate buffer solution having pH 8.0 with a flow rate of 0.3 mL min⁻¹. The bioelectrode consisted of 20% (w/w) of sunflower leaves tissue and 5% (w/w) of ferrocene at 0.00 V (vs Ag/AgCl). The bioelectrode exhibited a linear response from 1.0 × 10⁻⁶ up to 2.0 × 10⁻³ mol L⁻¹ glycolic acid with a detection limit (S/N = 3) and a quantitation limit (S/N = 10) of 1 × 10⁻⁶ and 3.3 × 10⁻⁶ mol L⁻¹, respectively. The sampling rate of 12 h⁻¹ and a relative standard deviation of 1.67% (n = 15) were achieved. The bioelectrode response decreased to 70% of the original value within 90 continuous injections. The proposed bioelectrode was satisfactorily applied to glycolic acid determination in human urine samples after appropriate sample pretreatment. Results obtained by the FI method were compared favorably with those obtained by HPLC. It offers advantages, which included rapidity, high activity, limited stability, ease of preparation and low cost.     

Determination of trace metals in urine with an on-line ultrasound-assisted digestion system combined with a flow-injection preconcentration manifold coupled to flame atomic absorption spectrometry

A flow analysis method with on-line sample digestion/minicolumn preconcentration/flame atomic absorption spectrometry is described for the determination of trace metals in urine. First, urine sample was on-line ultrasound-assisted digested exploiting the stopped-flow mode, and then the metals were preconcentrated passing the pre-treated sample through a minicolumn containing a chelating resin. A home-made minicolumn of commercially available imminodiacetic functional group resin, Chelite Che was used to preconcentrate trace metals (Cu, Fe, Mn and Ni) from urine. The proposed procedure allowed the determination of the metals with detection limits of 0.5, 1.1, 0.8 and 0.8 μg L⁻¹, for Cu, Fe, Mn and Ni, respectively. The precision based on replicate analysis was less than ±10.0%, and the enrichment factor obtained was between 21.3 (Mn) and 44.1 (Ni), for sample volumes between 2.5 and 5.0 mL, and an eluent volume of 110 μL. This procedure was applied for determination of metals in urine of workers exposed to welding fumes and urine of unexposed persons (urine control).