聚乙二醇-硫酸铵-二甲酚橙体系萃取分离钯

研究了萃取剂二甲酚橙与Pd(Ⅱ)离子的螯合物在聚合物-硫酸铵-水体系中两相间的分配行为。在pH1．0～6．0条件下，Pd(Ⅱ)几乎被二甲酚橙完全萃取到PEG相中，而Fe(Ⅱ)、Co(Ⅱ)、Zn(Ⅱ)萃取率随pH变化显著，Mn(Ⅱ)、Cd(Ⅱ)基本不被萃取。在HClO4介质pH1．0～2．0条件下，实现了Pd(Ⅱ)与Fe(Ⅱ)、Co(Ⅱ)、Zn(Ⅱ)、Mn(Ⅱ)、Cd(Ⅱ)的定量萃取分离。     

Comparison of sulphur and sulphur–oxygen ligands as ionophores for liquid–liquid extraction and facilitated transport of silver and palladium

The reactivity of new ligands described as S₁, S₅, S₂O₉ (in respect to character and amount of donors) towards metal ions was examined by extraction from HNO₃ and HCl media. These ligands were next utilised as carriers for Ag and Pd transport through a supported liquid membrane (SLM). The effect of collecting a greater number of S donors in one molecule and the influence of type of donors (O–S versus S) on efficiency and selectivity of Ag and Pd(II) extraction and transport were examined.

The extraction of Ag from HNO₃ solutions increased with increasing amount of S-donors in one molecule (S₁2O₉5). For palladium the sequence was different (S₅12O₉). The transport of Ag through SLM impregnated with m-chlorotoluene solution of ionophore increased in the same order as in the case of extraction, whereas for Pd the row was different: S₅2O₉1. The highest fluxes of Ag and Pd transported from HNO₃ equalled to 5.25×10⁻⁷ and 1.37×10⁻⁷ mol/m² s, respectively. Palladium flux depended on stripping solution type (Na₂S₂O₃相似文献   

Cationic (fluoromesityl)palladium(II) complexes

Halide abstraction from [Pd(μ-Cl)(Fmes)(NCMe)]₂ (Fmes = 2,4,6-tris(trifluoromethyl)phenyl or nonafluoromesityl) with TlBF₄ in CH₂Cl₂/MeCN gives [Pd(Fmes)(NCMe)₃]BF₄, which reacts with monodentate ligands to give the monosubstituted products trans-[Pd(Fmes)L(NCMe)₂]BF₄ (L = PPh₃, P(o-Tol)₃, 3,5-lut, 2,4-lut, 2,6-lut; lut = dimethylpyridine), the disubstituted products trans-[Pd(Fmes)(NCMe)(PPh₃)₂]BF₄, cis-[Pd(Fmes)(3,5-lut)₂(NCMe)]BF₄, or the trisubstituted products [Pd(Fmes)L₃]BF₄ (L = CN^tBu, PHPh₂, 3,5-lut, 2,4-lut). Similar reactions using bidentate chelating ligands give [Pd(Fmes)(L-L)(NCMe)]BF₄ (L-L = bipy, tmeda, dppe, OPPhPy₂-N,N′, (OH)(CH₃)CPy₂-N,N′). The complexes trans-[Pd(Fmes)L₂(NCMe)]BF₄ (L = PPh₃, tht) (tht = tetrahydrothiophene) and [Pd(Fmes)(L-L)(NCMe)]BF₄ (L-L = bipy, tmeda) were obtained by halide extraction with TlBF₄ in CH₂Cl₂/MeCN from the corresponding neutral halogeno complexes trans-[Pd(Fmes)ClL₂] or [Pd(Fmes)Cl(L-L)]. The aqua complex trans-[Pd(Fmes)(OH₂)(tht)₂]BF₄ was isolated from the corresponding acetonitrile complex. Overall, the experimental results on these substitution reactions involving bulky ligands suggest that thermodynamic and kinetic steric effects can prevail affording products or intermediates different from those expected on purely electronic considerations. Thus,water, whether added on purpose or adventitious in the solvent, frequently replaces in part other better donor ligands, suggesting that the smaller congestion with water compensates for the smaller M-OH₂ bond energy.     

钯与对若丹宁偶氮苯甲酸络合物的固相萃取和光度测定

根据新试剂对若丹宁偶氮苯甲酸(RABA)与钯的显色反应及C18固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量钯的新方法,在pH为2.0～4.0的HCl-邻苯二甲酸氢钾(HCl-KHP)缓冲介质中,在CTMAB存在下,钯与RABA发生反应形成1:1的稳定络合物,该络合物可用C18固相萃取小柱富集,小柱上富集的络合物用乙醇洗脱后用光度法测定,在富集后的测定液中,络合物最大吸收波长为500 nm,摩尔吸光系数ε=1.36×105 L·mol-1·cm-1,Pd2 量在0.1～1.0 μg/mL内符合比尔定律,方法用于催化剂中钯的测定.     

Preconcentration of submicrogram amounts of nickel by liquid-liquid extraction and micro back-extraction from water for graphite furnace atomic absorption spectrometry

The effective preconcentration of submicrogram amounts of nickel from water is described. Nickel is extracted into xylene as a dithiocarbamate complex and subsequently back-extracted into 100 μl of nitric acid for graphite furnace atomic absorption spectrometry. Conditions for quantitative extraction and back-extraction are described. Data on interferences, precision and detection limits are presented. Sub-μg 1^?1 levels of nickel in water could be determined with concentration factors of 500–1000 by the proposed method. The concentrations of nickel in rain water and surface snow were found to be 0.39 and 0.19 μg 1^?1, respectively. The limit of determination can be lowered by using concentration factors larger than 10⁴, nickel determination at ng 1^?1 levels being feasible.     

Cloud-point extraction,preconcentration, and spectrophotometric determination of palladium in water samples

The possibility of using Thio-Michler's Ketone (TMK), 4,4′-bis(dimethylamino) thiobenzophenone, for palladium(II) concentrated by micellar extraction at the cloud-point temperature, and later spectrophotometric determination, was investigated. Under the optimum conditions, preconcentration of 50?mL of water samples in the presence of 0.1% (w/v) octylphenoxy polyethoxy ethanol (Triton X-114), 2?×?10^?6?mol?L^?1?TMK and 1?×?10^–3?mol?L^?1 buffer solution (pH?=?3.0) gave the limit of detection of 0.47?ng?mL^?1, and the calibration graph was linear in the range of 2–50?ng?mL^–1. The recovery under optimum working conditions was higher than 97%. The proposed method has been applied to the spectrophotometric determination of palladium(II) in natural water samples after cloud-point extraction with satisfactory results.     

β羟肟萃取钯(Ⅱ)取代反应中的动力学催化作用

β羟肟、硫醚等在盐酸介质中萃取钯(Ⅱ)的配位取代反应具有较高的选择性,有实用意义^[1-5]。Cleare等^[1]曾提出加入胺类化合物以加快β羟肟萃钯的速度。本文在研究β羟肟萃钯(Ⅱ)机理^[2,3]的基础上考察了加入伯胺后2-羟基-4-(1-甲基庚氧基)二苯甲酮肟(HL)萃取钯(Ⅱ)的热力学和动力学行为以及界面特性,试图阐明伯胺对该取代反应的加速机理。试验所用伯胺N1923(Am)为混合支链伯胺,上海有机所实验厂生产。水相中伯胺含量用溴酚兰分光光度法测定^[6],其它实验方法参见[3]。     

Protonation of palladium(II)-allyl and palladium(0)-olefin complexes containing 2-pyridyldiphenylphosphine

The pendant nitrogen atom of the Ph₂PPy ligand in the Pd(II)-allyl complexes [PdCl(η³-2-CH₃-C₃H₄)(Ph₂PPy)] (1) and [Pd(η³-2-CH₃-C₃H₄)(Ph₂PPy)₂]BF₄ (3) has been protonated with methanesulfonic acid to afford the corresponding pyridinium salts [PdCl(η³-2-CH₃-C₃H₄)(Ph₂PPyH)](CH₃SO₃) (1a) and [Pd(η³-2-CH₃-C₃H₄)(Ph₂PPyH)₂](CH₃SO₃)₂(BF₄) (3a).Protonation strongly influences the ¹H and ¹³C NMR spectral parameters of the allyl moieties of 1a and 3a whose signals resonate at lower fields with respect to the parent species indicating that upon protonation Ph₂PPy becomes a weaker σ-donor and a stronger Π-acceptor. The allyl moiety, which in 1 is static, becomes dynamic in 1a, the observed syn-syn and anti-anti exchange being due to deligation of the protonated phosphine from the metal centre. Treatment of complex 3 with diethylamine in the presence of fumaronitrile gives the new Pd(0)-olefin complex [Pd(η²-fumaronitrile)(PPh₂Py)₂] (4) which has been characterized by elemental analysis and NMR spectroscopy. Low temperature protonation of 4 with methanesulfonic acid leads to the bis-protonated species [Pd(η²-fumaronitrile)(Ph₂PPyH)₂](CH₃SO₃)₂ (4a) which is stable only at temperatures <0 °C.     

The mechanism for palladium catalyzed carbonylation of cinnamyl chloride

In the palladium catalyzed alkoxycarbonylation of cinnamyl chloride two mechanisms play a role. An associative mechanism was observed at low pressure, while an insertion mechanism was observed at high pressure or when an excess of ligand was used. Several putative intermediates of the catalytic alkoxycarbonylation have been synthesized and characterized, such as 5c of which an X-ray crystal structure was obtained.     

Kinetics of complex formation between palladium(II) acetate and bis(diphenylphosphino)ferrocene

The kinetics of complex formation between palladium(II) acetate, and 1,1’-bis(diphenylphosphino)ferrocene, dppf, in two different deuterated solvents CDCl₃ and DMSO-d₆ were investigated using ³¹P NMR spectroscopy. The mole ratio and the ³¹P-chemical shifts in DMSO-d₆ solution revealed the formation of an intermediate, which is gradually converted into the more stable [Pd(dppf)OAc)₂] species with a dppf acting as a chelate ligand. In the chloroform solution however, the interaction of metal ion and the ligand resulted directly in the formation of [Pd(dppf)OAc)₂] species with a chelating dppf. The rate constant for the complexation reaction was evaluated from computer fitting of the corresponding integration-time data.     

Syntheses and structures of bowl-shaped triarylphosphines and their palladium(II) complexes

Novel bowl-shaped triarylphosphines, tris(2,2″,6,6″-tetraalkyl[1,1′:3′,1″-terphenyl]-5′-yl)phosphines (TRMP: alkyl = methyl; TRIP: alkyl = isopropyl), were prepared by lithiation of the corresponding m-terphenyl bromides followed by reaction with PCl₃. X-ray crystallographic analysis revealed that the phosphorus center of TRMP is embedded in the shallow bowl-shaped cavity of 16 Å diameter and 2.1 Å depth formed by three radially extended m-terphenyl units. Its cone angle was estimated to be as large as 174°. In the crystal structure of TRIP, the depth of the cavity and cone angle increased to 3.3 Å and 206°, respectively, because of the different arrangement of the m-terphenyl units. In contrast with TRMP, which can form the mononuclear complex, PdCl₂(TRMP)₂ (6), in the reaction with PdCl₂, treatment of TRIP (1 or 3 eq.) with PdCl₂ produced the trinuclear palladium(II) chloride complex, [(PdCl₂)₃(TRIP)₂] (8), as a single product. X-ray crystallography established the structure of 8, where the trimer of PdCl₂ is terminated by two TRIP ligands. The formation of the different types of PdCl₂ complexes was explained in terms of the difference in the cavity shape of TRMP and TRIP.     

Isomerisation of ω-hydroxyalkenes under hydroxycarbonylation conditions in palladium catalysed aqueous phase systems

The ω-hydroxyolefins 3-buten-1-ol, 3-buten-1-methyl-1-ol and 4-penten-1-ol were subjected to hydroxycarbonylation conditions in water in the presence of PdCl₂(PhCN)₂ and 4-8 equiv. of water soluble tris(3-sodiumsulfonatophenyl)phosphine (TPPTS), or N-bis(N′,N′-diethyl-2-aminoethyl)-4-aminomethylphenyl-diphenylphosphine (N3P). Under conditions of high conversion, the olefins primarily undergo isomerisation through a chain walking mechanism with selectivities for aldehyde ranging from 65% to 98%, with the lower values for longer chain alcohols. The lactones formed as the minor product are almost exclusively branched, indicating that in the first step 2,1-insertion is strongly favoured over 1,2-insertion. In the N3P system also linear lactone is produced at lower conversion. Running the reaction in D₂O produces multiple deuterium incorporation in all positions of the carbon chain. A mechanism is discussed.     

Rapid removal of selected volatile organic compounds from gaseous mixtures using a new dispersive vapor extraction technique: A feasibility study

A new dispersive vapor extraction (DVE) technique for rapid removal of selected volatile organic compounds (VOCs) from gaseous mixtures was investigated. In this technique, less than 1.0 mL of a volatile solvent was vaporized for 8 min in a 250-mL flask containing a gaseous mixture. The flask was then cooled under running tap water for 2-3 min to induce condensation of the vapor and co-extraction of the VOCs from the headspace. The technique was tested over a concentration range of 4-23 ppb, and resulted in extraction efficiencies ranging from 80 to 97% for the VOCs tested. Because of its simplicity and the relatively short sampling time, DVE could potentially lead to high sample throughput and rapid air analysis.     

Dual mechanism of hydrogen desorption from palladium alloys postulated on the basis of cyclic voltammetric studies

The process of hydrogen absorption/desorption in Pd-Pt and Pd-Pt-Rh alloys has been investigated using cyclic voltammetry. Hydrogen absorbed at constant potential was electrooxidized at various scan rates. The charge of hydrogen oxidation has been found to be dependent on the scan rate. The decrease in the oxidation charge observed for low scan rates indicates that, under these conditions, some amount of hydrogen may be removed via a non-electrochemical recombination reaction. The results suggest that the dual mechanism of hydrogen desorption, involving electrochemical oxidation and non-electrochemical recombination, confirmed for pure palladium, is valid also for palladium alloys.Contribution to the 3rd Baltic Conference on Electrochemistry, GDASK-SOBIESZEWO, 23–26 APRIL 2003.Dedicated to the memory of Harry B. Mark, Jr. (February 28, 1934–March 3rd, 2003)     

Site-selective direct arylation of unprotected adenine nucleosides mediated by palladium and copper: insights into the reaction mechanism

Reaction conditions facilitating the site-selective direct aryl functionalisation at the C-8 position of adenine nucleosides have been identified. Many different aromatic components may be effectively cross-coupled to provide a diverse array of arylated adenine nucleoside products without the need for ribose or adenine protecting groups. The optimal palladium catalyst loading lies between 0.5 and 5 mol %. Addition of excess mercury to the reaction had a negligible affect on catalysis, suggesting the involvement of a homogeneous catalytic species. A study by transmission electron microscopy (TEM) shows that metal containing nanoparticles, ca. 3 nm with good uniformity, are formed during the latter stages of the reaction. Stabilised PVP palladium colloids (PVP=N-polyvinylpyrrolidone) are catalytically active in the direct arylation process, releasing homogenous palladium into solution. The effect of various substituted 2-pyridine ligand additives has been investigated. A mechanism for the site-selective arylation of adenosine is proposed.     

Simultaneous extraction and preconcentration of copper,silver and palladium with modified alumina and their determination by electrothermal atomic absorption spectrometry

In the present work,an easy solid phase extraction method using alumina modified with polyethylenimine as a new adsorbent was applied to the simultaneous extraction of copper,silver,and palladium ions prior to their determination with electrothermal atomic absorption spectrometry.The analytical procedure involved the complex formation of these cations with polyethylenimine as a chelating agent in buffer media of pH 7.0.Under the optimum conditions,a preconcentration factor of200,150,and 200,precision of ±5.4%,±4.7%,and ±5.2%and linear calibration ranges of 15.0-140,4.0-93,and 7.5-125 ng/L(in original solution) for Cu,Ag,and Pd were obtained,respectively.Also detection limits of3.9,1.1,and 2.0 ng/L were obtained for Cu,Ag,and Pd,respectively.The proposed method was applied to the determination of copper,silver,and palladium in some real samples with satisfactory results.     

Preparation and catalytic properties of NR-stabilized palladium colloids

Palladium colloids revealing narrow particle size distributions can be obtained by chemical reduction using tetra–alkylammonium hydrotriorganoborates. Combining the stabilizing agent [NR] with the reducing agent [BEt₃H^?] provides a high concentration of the protecting group at the reduction centre. Alternatively, NR₄X (X = halogen) may be coupled to the metal salt prior to the reduction step: addition of N(octyl)₄Br to Pd(ac)₂ in THF, for example, evokes an active interaction between the stabilizing agent and the metal salt. Reduction of NR-stabilized palladium salts with simple reducing agents such as hydrogen at room temperature yields stable palladium organosols which may be isolated in the form of redispersible powders. The anion of the palladium salt is crucial for the success of the colloid synthesis. Electron microscopy shows that the mean particle size ranges between 1.8 and 4.0 nm. An X–ray–photoelectron spectrscopic examination demonstrated the presence of zerovalent palladium. These palladium colloids may serve as both homogeneous and heterogeneous hydrogenation catalysts. Adsorption of the colloids onto industrially important supports can be achieved without agglomeration of palladium particles. The standard activity of a charcoal catalyst containing 5% of colloidal palladium determined through the cinnamic acid standard test was found to exceed considerably the activity of the conventional technical catalysts. In addition, the lifespan of the catalyst containing a palladium colloid, isolated from the reduction of [N(octyl)₄]₂PdCl₂Br₂ with hydrogen, is superior to conventionally prepared palladium/charcoal (Pd/C) catalysts. For example, the activity of a conventional Pd/C catalyst is completely suppressed after 38×10³ catalytic cycles per Pd atom, whereas the colloidal Pd/C catalyst shows activity even after 96times;10³ catalytic cycles.     

Kinetics of ion-pair extraction in continuous flow systems

Kinetic aspects of ion-pair extraction in continuous-flow systems have been studied. Processes have been developed by using a new methodology based on reversal of the flow direction for a preselected number of cycles and on contiuous monitoring at the detector of a plug of organic phase inserted into a carrier stream (aqueous phase) by means of a conventional injection valve. The configuration used required none of the units typically associated with this separation technique. The information obtained, with clear kinetic connotations, can also be exploited for analytical purposes. The behaviour of different ion pairs formed between ferroin and 23 anionic counter ions has been studied. Individual and joint kinetic determinations of these anions from kinetic parameters are proposed.