Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

Construction and performance characterization of ion-selective electrodes for potentiometric determination of phenylpropanolamine hydrochloride applying batch and flow injection analysis techniques

New phenylpropanolamine hydrochloride (PPA.Cl)-selective electrodes of the conventional polymer membrane type, based on incorporation of phenylpropanolamine-tetraphenylborate (PPA-TPB) ion-pair or phenylpropanolamine-phosphotungstate (PPA-PT) ion-associate in a poly(vinyl chloride) (PVC) membrane plasticized with dioctylphethalate (DOP) or dibutylphethalate (DBP), have been constructed. The electrodes were fully characterized in terms of the membrane composition, temperature, and pH. The electrodes were applied to the potentiometric determination of PPA.Cl in pure solutions and in pharmaceutical preparations under batch and flow injection conditions. The sensors showed fast, stable, and Nernstian slope over the concentration ranges 1.0×10⁻⁵ to 8.91×10⁻³ M and 10⁻⁵ to 10⁻² M in the case of PPA-TPB applying batch and flow injection analysis (FIA), respectively, and 5.01×10⁻⁶ to 1.25×10⁻³ M and 10⁻⁵ to 10⁻² M in the case of PPA-PT for batch and FIA systems, respectively. The electrodes exhibited good selectivity for PPA.Cl with respect to a large number of inorganic cations, sugars, amino acids, and components other than phenylpropanolamine of the mixed drugs. The effect of temperature on the electrodes was also studied.     

Potentiometric detection of organic acids in ion-exclusion chromatography using different types of liquid-membrane electrodes

Four different liquid-membrane electrodes were tested in a potentiometric flow-cell, in combination with an LC ion chromatography system (Aminex HPX-87H column). This setup was used for the determination of weak organic acids. The flow-through detector was of the wall-jet type. Conditions were established to achieve the best separation and detection characteristics. The sensitivity, selectivity and response time of the different electrodes were compared. Calibration curves and detection limits were measured for several organic acids, and compared with conductometric, and with low-wavelength UV detection. The detection limits were improved by inserting a post-column ion-suppressor system between the column and the detector. Several biological samples were analyzed to demonstrate the possibilities of the potentiometric detector.     

A SO2-selective electrode based on a Zn-porphyrin for wine analysis

This work describes the assessment of a SO₂-selective electrode based on the use of the neutral carrier 5,10,15,20-tetraphenyl(porphyrinate)zinc(II) in a PVC membrane plasticized with 2-nitrophenyl phenyl ether. After being conditioned in 2 mol L⁻¹ diethylamine solution for 24 h, the electrode exhibited selective anionic response toward the analyte in a concentration interval of more than four decades, with an slope of −59.5 mV dec⁻¹, a practical detection limit of 3.7 × 10⁻⁶ mol L⁻¹ and a low limit of linear range of 7.2 × 10⁻⁶ mol L⁻¹. The response mechanism is based on the displacement of the diethylamine:metalloporphyrin complex equilibrium within membrane bulk, inducing a variation in the cationic-sites to ionophore ratio. In turn, free hydroxyl ions are complexed by the displaced ionophore in a ratio 1:1 and translated as single negative charge nernstian response. Finally, the selectivity of the electrode is evaluated in view of its application to wine analysis. Results had high accuracy and precision when compared with a reference method.     

盐酸曲马多离子选择性电极的研制与应用

介绍了盐酸曲马多离子选择性电极的制备,特性以及在药物分析方面的应用。综合考虑活性物质的含量和增塑剂种类及含量的影响,选择了以盐酸曲马多—四苯硼钠缔合物为活性物质,以DOP为增塑剂的电极体系。该电极在5×10-5～1×10-2mol/L范围内表现能斯特响应,斜率为57.1mV/pC,检测下限为1×10-5mol/L。电极对多种异质离子表现良好的选择性。运用电位法测定药物中的盐酸曲马多,回收率为94.9%～106.0%。     

Potentiometric response and mechanism of anionic recognition of heterocalixarene-based ion selective electrodes

The ion selective electrode (ISE)-based potentiometric approach is shown to be an effective means of characterizing the anion recognition sites in the molecular receptor calix[2]pyridino[2]pyrrole (CPP). In particular, potentiometric pH-measurements involving the use of experimental PVC-membranes based on CPP revealed the existence of both mono- and diprotonated forms of the receptor under readily accessible conditions. Based on these analyses, apparent surface protonation constants for this heterocalixarene were found to lie between 8.5-8.9 (pK_B1) and 3.3-3.8 (pK_B2). CPP was found to interact with targeted anionic analytes based on both coulombic and hydrogen bond interactions, as inferred from varying the kinds of ionic sites present within the membrane phase. Potentiometric selectivity studies revealed that CPP preferred “Y-shaped” anions (e.g. acetate, lactate, benzoate) over spherical anions (e.g. fluoride and chloride), fluoride over chloride within the set of spherical anions, and the ortho-isomer over the corresponding meta- and para-isomers in the case of hydroxybenzoate (salicylate and congeners). In the context of this study, the advantages of potentiometric determinations of acetylsalicylic acid using optimized PVC-membranes based on CPP relative to more conventional PVC-membrane ISEs based on traditional anion exchanger were also demonstrated.     

Advances in ion chromatography: speciation of μ 1−1 levels of metallo-cyanides using ion-interaction chromatography

Fe(CN)^4?₆, Cu(CN)^3?₄, Co(CN)^3?₆, Fe(CN)^3?₆, Ni(CN)^2?₄ and Cr(CN)^3?₆ are determined by ion-interaction chromatography using a C₁₈ column and methanol-tetrahydrofuran-10 mM phosphate buffer (pH 7.9) (25 + 1 + 74, v/v/v) containing 5 mM tetrabutylammonium hydroxide as mobile phase, with spectrophotometric detection at 214 nm. Detection limits are in the range 0.01–0.5 mg 1^?1. In an alternative approach, an automated on-line sample preconcentration technique is used wherein a 2-ml volume of sample containing metallo-cyanides is loaded onto a C₁₈ precolumn which has been equilibrated with the above mobile phase. The bound solutes are then eluted from the precolumn to a C₁₈ analytical column where they are separated using the same mobile phase as employed to equilibrate the precolumn. Detection limits are in the rate 0.08–1.58 μg 1^?1 and calibration graphs are linear up to 200 μg 1^?1. The preconcentration step is shown to give quantitative recoveries for all species except Fe(CN)^4?₆ and (CN)^3?₄. The iron(II) complex does not bind quantitatively to the precolumn, and extensive studies with the copper complex suggested that low recoveries were due to dissociation and ligand-exchange reactions occurring during the chromatographic separation process. Negative interference effects were observed for Cl^? and SO^2?₄ when present at a level of 250 mg 1^1?, and UV-absorbing anions such as Br^?, SCN^?, NO^?₂ and NO^?₃ caused positive interference when present at concentrations as low as 1 mg 1^?1. The negative interferences could be reduced by diluting the sample and the positive interferences could be eliminated by incorporating an additional step in the preconcentration process, in which UV-absorbing anions bound to the precolumn after sample loading were eluted selectively using an eluent consisting of 10 mM NaCl in phosphate buffer (pH 6.7).     

离子色谱法检测马铃薯及其淀粉中氢氰酸

建立了马铃薯及其淀粉中氰化物离子色谱的检测方法。样品经超声、冷冻离心、通过在线过滤处理后直接用离子色谱进行检测。检出限为0.054 mg/L,氰化物的线性范围为0.136～2.72 mg/L;加标回收率为85%～93%;相对标准偏差(RSD)为1.2%,可以满足氰化物检测的要求。     

Anion-selective properties of alkali metal-free lead phosphate glasses containing silver chloride and their application in an ion-selective electrode

Alkali-free lead phosphate glasses containing silver chloride have been developed for anion responsive sensors. From measurements of the final glass compositions by electron probe microanalysis, it became clear that some of chloride ions in the glass bulk were not volatilized during the glass melting process. Compared with phosphate glasses containing silver oxide, the new glass electrodes containing silver chloride could respond more rapidly, although the response behaviour for anionic species were similar. From the electrode potential vs. time curve for the anionic species, the potential rapidly reached equilibrium when these concentrations varied from 10^?5 to 10^?2 M. The response times, t₉₅, to thiocyanate of the new glass electrode and the phosphate glass electrode containing silver oxide were 30 and 110 s, respectively. Moreover, the response time required for an initial potential change with a concentration jump of thiocyanate with the new glass electrode was found to be independent of the membrane thickness within about 2 mm and of the measuring temperature between 15 and 40°C. It is concluded that the diffusion process of species such as silver ion in the glass bulk does not take part in the initial part of the response behaviour.     

Flow injection potentiometric determination of paraquat in formulations and biological samples

A flow injection potentiometric method for the rapid determination of paraquat in herbicide formulations and biological samples is described. It is based on the utilization of a flow-through potentiometric detector containing polyvinyl chloride-immobilised octamethylcyclotetrasiloxane, a lipophilic plasticizer (tetra-n-undecyl 3,3′,4,4′-benzophenone tetracarboxylate) and membrane additive potassium tetrakis(4-chlorophenyl)borate. The detector was minimally interfered by the presence of constituents such as Na⁺, K⁺, Ca²⁺, Mg²⁺, glucose, urea, lactic and citric acids at physiological levels, respectively. Good correlation between results of the proposed method and HPLC for the formulation samples was found, while results for the determination of paraquat in biological samples such as urine, vomitus and stomach washout was less satisfactory.     

Potentiometric Cd-selective electrode with a detection limit in the low ppt range

A recently introduced model describing the response curves of polymer membrane ion-selective electrodes (ISEs) is used here to optimize a Cd²⁺-ISE with a view to achieve very low detection limits. In a first step, the selectivity behavior is determined for two membranes based on the ionophore, N,N,N′,N′-tetradodecyl-3,6-dioxaoctanedithioamide (ETH 5435), but having different concentrations of the ionophore and ion-exchanger. Based on these data, the optimal response curves are calculated with a model that takes into account the ion fluxes induced by interfering ions. The experimental results with different ionic backgrounds correspond very well with the predicted effects. The best lower detection limit of 10⁻¹⁰ M or 11 ppt Cd²⁺ is achieved at pH 7 with an ionic background of 10⁻⁴ M NaNO₃.     

Dynamic calibration system for trace analysis in ion chromatography

Summary A dynamic method for the preparation of diluted standards in trace analysis by Ion Chromatography is described. The proposed system uses a diffusion cell that through a capillary tube of known dimension, continuously provides large volumes of highly diluted standard.The diffusion cell setting-up and its working conditions are described, and the advantages and difficulties of the dynamic method are pointed out. Loading the cell with concentrated standard solutions (200–10000 ppm), it was possible to produce diluted Na₂SO₄ standards in the 0.1–10 ppb concentration range. The cell is able to work for nearly a month before the source amount decreased by 1%.The linearity of the calibration device is good and the method is free of systematic errors. Under strictly controlled experimental condition, the diffusion cell provides primary standards because it allows to obtain concentrations only depending on its geometry.     

K2S2O8-离子色谱法测定水中总氮量

在不锈钢蒸汽消毒器中用K2S2O8将水中含氮物质中的N氧化为NO3-,用离子色谱测定,从而测定水中总氮量。实验对K2S2O8氧化液用量及反应时间等进行探讨,并对长江水中总氮量进行了测定。实验结果表明测定最佳条件是氧化时间10 min以上、氧化剂用量为理论用量的5倍;长江水(武汉段)总氮量为2.09 mg/L,测得的总氮量与文献报道的基本吻合。     

Electroanalytical performance of a terbium(III)-selective sensor based on a neutral ionophore in environmental and medicinal samples

A new highly selective terbium(III) electrode was prepared with a polymeric film doped using S-2-benzothiazolyl-2-amino-α-(methoxyimino)-4-thiazolethiol acetate as an electroactive material, benzyl acetate (BA) as a plasticizer, and potassium tetrakis(4-chlorophenyl) borate (KTpClPB) as an anionic site in the percentage ratio 3.17:1.58:63.4:31.7 (ionophore-KTpClPB-BA-PVC, w/w). The electrode exhibited a linear response with a near Nernstian slope of 19.5 mV/decade within the concentration range 1.5 × 10⁻⁷−1.0 × 10⁻² M terbium ions, with a working pH range from 2.0 to 8.0, and a fast response time of 10 s and presented satisfactory reproducibility. The limit of detection was 9.3 × 10⁻⁸ M. The results show that this electrode can be used in ethanol media up to 30% (v/v) concentration without interference. It can be used for 3 months without any considerable divergence in the potentials. Selectivity coefficients for terbium(III) with respect to many cations were investigated. The electrode is highly selective for terbium(III) ions over a large number of monovalent, bivalent, and trivalent cations. This shows the valuable property of the proposed electrode. The stability constant of the ionophore towards Tb³⁺ ions was determined with the sandwich membrane method. It was successfully used as an indicator electrode in potentiometric determination of terbium(III) ions with EDTA and in direct determination in tap water and binary mixtures with quantitative results. The utility of the proposed electrode was also determined in the presence of ionic and nonionic surfactants and in the presence of fluoride ions in four pharmaceutical (mouthwash) preparations. Figure Structure of S-2-Benzothiazolyl-2-amino-α-(methoxyimino)-4-thiazolethiol acetate     

Tetracycline Sensitive Membrane Electrodes Based on Poly (Vinyl Chloride) Matrices and their use in Drug Analysis

ABSTRACT

Tetracycline hydrochloride-selective electrodes of both the coated wire and the conventional polymer membrane types have been prepared. They are based on incorporating the tetracycline-phosphotungstate ion-associate in plasticized poly(vinyl chloride) film. A Nernstian response is shown by these electrodes within certain concentration ranges depending on the type of electrode. The effect of pH of the test solution and time of soaking on the electrodes' performance are studied. The electrodes are highly selective for tetracycline with respect to several inorganic cations, sugars and some amino-acids of significant importance in biological fluids and pharmaceutical preparations. The standard cell potentials, E°, were determined at different temperatures and used to calculate the isothermal temperature coefficient of the cell. Tetracycline is determined successfully in pure solutions and in pharmaceutical preparation using the standard additions method and potentiometric titration.     

Fluidized beds in flow analysis: use with ion-exchange separation for spectrophotometric determination of zinc in plant digests

A novel strategy for utilization of solid reagents in flow analysis is proposed. Establishment of diffuse and reproducible geometry enables the solid particles to be maintained in constant floating, reflux, and circulating motion inside a mini-chamber. This is efficiently accomplished with pulsed flows, a characteristic of multi-pumping flow systems. Drawbacks inherent in solid-phase packed columns, for example backpressure, preferential pathways, swelling, etc., and some limitations inherent in immobilized reagents are minimised. Spectrophotometric determination of zinc in plants was selected as an application of the technique. Dowex 1-X8 anionic resin was kept freely inside a mini-chamber. Zinc chloro-complexes were adsorbed on the moving particles and derivatization with zincon was performed after elution. Analytical figures of merit and the potential and limitations of the approach are discussed.     

Citrate selective electrodes for the flow injection analysis of soft drinks, beers and pharmaceutical products

Aiming the establishment of simple and accurate readings of citric acid (CA) in complex samples, citrate (CIT) selective electrodes with tubular configuration and polymeric membranes plus a quaternary ammonium ion exchanger were constructed. Several selective membranes were prepared for this purpose, having distinct mediator solvents (with quite different polarities) and, in some cases, p-tert-octylphenol (TOP) as additive. The latter was used regarding a possible increase in selectivity. The general working characteristics of all prepared electrodes were evaluated in a low dispersion flow injection analysis (FIA) manifold by injecting 500 μl of citrate standard solutions into an ionic strength (IS) adjuster carrier (10⁻² mol l⁻¹) flowing at 3 ml min⁻¹. Good potentiometric response, with an average slope and a repeatability of 61.9 mV per decade and ±0.8%, respectively, resulted from selective membranes comprising additive and bis(2-ethylhexyl)sebacate (bEHS) as mediator solvent. The same membranes conducted as well to the best selectivity characteristics, assessed by the separated solutions method and for several chemical species, such as chloride, nitrate, ascorbate, glucose, fructose and sucrose. Pharmaceutical preparations, soft drinks and beers were analyzed under conditions that enabled simultaneous pH and ionic strength adjustment (pH=3.2; ionic strength=10⁻² mol l⁻¹), and the attained results agreed well with the used reference method (relative error<4%). The above experimental conditions promoted a significant increase in sensitivity of the potentiometric response, with a supra-Nernstian slope of 80.2 mV per decade, and allowed the analysis of about 90 samples per hour, with a relative standard deviation <1.0%.     

Potentiometric detection in ion chromatography using a metallic copper indicator electrode

Summary A metallic copper electrode housed in a suitable flowcell is shown to be a sensitive and versatile potentiometric detector for ion chromatography. This electrode may be used for direct or indirect detection of many inorganic anions and cations and also for organic acids. In the direct detection mode, electrode response is based on either complexation of copper ions at the electrode surface by eluted species, or on oxidation and reduction reactions for eluted species which are strong oxidants or reductants. Direct detection is therefore applicable to such species as amino acids, organic acids, chloride, bromide, iodide, chlorate, bromate and iodate. Indirect detection is possible for anions which do not complex copper ions, provided a copper complexing ligand (such as phthalate) is used in the eluent; cations which complex this ligand are also detectable. Indirect detection may be used for species such as nitrite, nitrate, acetate, formate, succinate, benzoate, alkaline earth ions and transition metal ions. Electrode calibration relationships are discussed and sample separations are presented, together with some typical detection limits attainable in the direct and indirect detection modes.Presented in part at a National Symposium on Ion Chromatography, held at the University of New South Wales, Kensington, Australia, Nov. 21, 1984.