Gas-phase ion chemistry in the ternary SiH(4)-C(3)H(6)-PH(3) system

Propene-phosphine and the silane-propene-phosphine gaseous mixtures were studied by ion trap mass spectrometry. For the binary mixture the variation of ion abundances under different partial pressures and the mechanisms of ion-molecule reactions are reported. Moreover, the rate constants of the main processes were measured and compared with the collisional rate constants to determine the reaction efficiencies. In the ternary silane-propene-phosphine mixture the mechanisms of formation of Si(m)C(n)P(p)H(+)(s) ion clusters were elucidated, but the complexity of the system and the low abundances of the ions usually isolated by successive steps prevented the determination of rate constants. The hydrogenated ternary ions are mainly formed by reactions of Si(r)P(s)H(+)(t) ions with propene, whereas a minor contribution comes from reactions of Si(m)C(n)H(+)(p) ions with phosphine. The C(v)P(w)H(+)(z) ions show very low reactivity with silane. The formation processes of these species are discussed in relation to their possible role as precursors of amorphous silicon carbides doped with phosphorus obtained by deposition from properly activated silane-propene-phosphine mixtures.     

Reachability,persistence, and constructive chemical reaction networks (part II): a formalism for species composition in chemical reaction network theory and application to persistence

Chemical Reaction Network Theory uses mathematics to study systems of reactions and infer their properties from their structure. At the onset is an abstract definition of a chemical reaction network which is very general and is pertinent beyond chemistry, e.g. in modeling interactions of microscopic and macroscopic living species. This allows the theory to provide widely applicable theorems. It also results in that the idea of chemical composition is mostly used implicitly in examples to illustrate theorems, not explicitly to establish new properties. In this paper we propose a formalism for species composition in a way that generalizes the idea of atomic composition—for instance, elementary species will extend the idea of atoms. We envision that this formalism could lead to more theorems on classes of networks that are of interest in biochemistry. Toward that prospect, we prove that if there is no isomerism among elementary species, and if a newly formalized and widely applicable reversibility condition holds, then a reaction network is vacuously persistent: no species will tend to extinction if all species are implicitly present at initial time. This paper is the second in a series of three articles. The first paper studies vacuous persistence and the third one probes a class of enzymatic networks.     

Kinetics of reduction of transition metal ions by sodium tetrahydroborate. Reduction of molybdenum(VI) and tungsten(VI)

Summary The kinetics of reduction of molybdenum(VI) and tungsten(VI) ions by NaBH₄ in buffered aqueous solution have been investigated. The reaction rate depends upon the first powers of the concentrations of the reactants. The temperature was varied, and the activation parameters were evaluated. Chemical and spectral evidence for the formation of molybdenum(V) and tungsten(V), as the reaction products, is presented. Plausible mechanistic pathways for these reactions are suggested.     

Li+粘贴CHnCl3-nO2和CFnCl3-nO2( n = 1~3 )自由基：Li+–CHnCl3-nO2和 Li+–CFnCl3-nO2的结构与性质的研究

The structures and stabilities of these still experimentally unknown CH_nCl_(3-n)O_(2-)Li~ and CF_nCl_(3-n)O_(2-)Li~ ionshave been theoretically investigated by ab initio molecular orbital theory and density functional theory(DFT)inconjunction with the 6-311G(d,p),6-311 G(d,p),6-311 G(2d,p)and 6-311 G(2df,2p)basis sets.The optimizedgeometries,chemical bonding and NBO analysis indicate that these complexes of CH_nCl_(3-n)O_(2-)Li~ and CF_nCl_(3-n)O_(2-)Li~ exist as ion-dipole molecules.The calculated affinity energies of these species exceed 41.9 kJ/mol,which arelarge enough to suggest the possibility that these title complexes could be detected as stable species in gas phase byLi~ ion attachment mass spectrometry.     

Diphosphiranium (P2C) or diphosphetanium (P2C2) cyclic cations: different fates for the electrophile-initiated cyclodimerization of a phosphaalkene

The synthesis and crystallographic characterization of two new classes of cationic three- and four-membered organophosphorus heterocycles are reported. Treating phosphaalkene tBuP=CHtBu (1) with triflic acid (2:1) afforded an unprecedented asymmetric diphosphiranium triflate [tBuP-CH(tBu)-P(tBu)(CH2tBu)]OTf (2). Surprisingly, the analogous reaction of tBuP=CHtBu with methyl triflate (2:1) afforded a 1,3-diphosphetanium salt [tBu(Me)P-CH(tBu)-P(tBu)-CH(tBu)]OTf (3a). Structural characterization of these novel P2C and P2C2 rings confirmed their identity, and the metrical parameters were consistent with the strain expected for these ring systems. In preliminary mechanistic investigations by NMR spectroscopy, phosphenium species [tBuPCH2tBu]OTf (4) was detected in the stoichiometric reaction of 1 with HOTf while methylenephosphonium [Me(tBu)P=CHtBu]OTf (5) was observed when 1 was treated with MeOTf. The opposite reactivity observed when the P=C bond is treated with MeOTf compared that with HOTf is surprising and, to our knowledge, has not been observed previously in phosphaalkene chemistry. In addition to their fundamental interest, we are interested in these species as ring-closed forms of the propagating species in the cationic polymerization of P=C bonds.     

Synchronicity of mononuclear and dinuclear events in homogeneous catalysis. Hydroformylation of cyclopentene using Rh4(CO)12 and HRe(CO)5 as precursors

The combined application of two or more metals in homogeneous catalysis can lead to synergistic effects; however, the phenomenological basis for these observations often goes undetermined. The hetero-bimetallic catalytic binuclear elimination reaction, a system involving both mononuclear and dinuclear intermediates, has been repeatedly suggested as a possible mechanism. In the present contribution, the simultaneous application of Rh4(CO)12 and HRe(CO)5 as precursors in the hydroformylation reaction leads to a very strong synergistic rate effect. In situ spectroscopic measurements confirm the presence of both mononuclear and dinuclear intermediates such as RCORh(CO)4 and RhRe(CO)9 in the active system. Moreover, kinetic analysis confirms interconversion of these intermediates as well as their statistical correlation with organic product formation. Specifically, the rate of hydrogen activation by RhRe(CO)9 is exactly equal to the rate of aldehyde formation from binuclear elimination between HRe(CO)5 and RCORh(CO)4 at all reaction conditions studied. Thus the catalytic events involving mononuclear species and those involving dinuclear species are synchronized. In the present experiments, the new topology is orders of magnitude more efficient than the corresponding unicyclic rhodium system.     

Chemical vapor generation of noble metals for analytical spectrometry

As is apparent from the literature devoted to the analytical atomic spectrometry, chemical vapor generation (CVG) of noble metals by reaction with tetrahydroborate in acidic media may enhance the introduction of these elements into different atomic spectrometric sources. Recent developments in the CVG of noble metals species by reaction with tetrahydroborate in acidic medium are surveyed. Different aspects of this novel technique are discussed, including type of instrumentation used for the reaction, separation and transport of the species, effect of chemical and physical factors, identification of the species, and the efficiency of the process. Limitations and future prospects of the CVG technique are discussed.     

HPLC-ICP-MS and HPLC-ES-MS/MS characterization of synthetic seleno-arsenic compounds

Various toxicological and metabolic interactions have been reported to exist between arsenic and selenium. In the present study, synthetic seleno-arsenic compounds, potentially suitable for probing metabolic interactions between these two elements, were prepared and tentatively characterized by using high-performance liquid chromatography (HPLC)–electrospray tandem mass spectrometry and HPLC–inductively coupled plasma mass spectrometry. In analogy to the recently identified thio-arsenic species, which can be prepared from their corresponding oxo-arsenic species via reaction with H₂S, the seleno-arsenic compounds were also derived from oxo-arsenic compounds via reaction with H₂Se. Figure H₂Se bubbled into solutions containing oxo‐arsenosugars converts them into their seleno‐arsenosugar analogues.     

Uranium(IV) Sulfates: Investigating Structural Periodicity in the Tetravalent Actinides

Chemical trends within the periodic table are frequently used as guides for predicting reactivity, structure, and electronic properties of the elements. While these trends have been rigorously investigated for the transition metals, the understanding of trends within the actinide series is elementary in comparison. Herein, we report the synthesis and characterization of five new U(IV) sulfate compounds and discuss their relationship to previously reported An(IV) sulfate species, an analysis that allows for the elucidation of solid state trends across the actinides. One such trend suggests the increase in Lewis acidity that occurs when traversing the actinides from thorium to plutonium promotes bidentate binding of the sulfate ligand as long as complexation can outcompete the resulting increase in steric pressure. This hypothesis correlates well with the experimental results previously reported for the solution phase speciation in An(IV) sulfate systems.     

The behaviour of different organometallic compounds in the presence of inorganic mercury(II): transalkylation of mercury species and their analysis by the GC–MIP–PED system

It is shown that four different mercury species are formed by the abiotic reaction of inorganic mercury with different, ecologically relevant, organolead and organoarsenic compounds. Therefore solutions of tetraethyl-lead, trimethyl-lead chloride and dimethylarsonic acid were prepared and mixed with stock solutions of inorganic mercury at different concentrations. The final solutions were analyzed for their content of newly synthesized mercury species. The analysis was carried out by using a system of solid-phase micro-extraction (SPME): capillary gas chromatography (GC), microwave-induced plasma (MIP) and a plasma-emission detector (PED). We found that transfer of one or two alkyl groups to the inorganic mercury is possible under the conditions mentioned below. The transalkylation rate depends on the kind of organometallic compound and on the pH. The results were confirmed by the reaction with inorganic mercury and analysis of a soil sample, containing tetraethyl-lead and trimethyl-lead, in which not only the monoalkyl compound, but also the dialkylated compound of the relevant inorganic metal, were found. © 1997 John Wiley & Sons, Ltd.     

Differential double pulse voltammetry (DDPV) and additive differential pulse voltammetry (ADPV) applied to the study of the ACDT mechanism

The value of double potential pulse differential techniques for electrochemical studies of dynamic chemical speciation is investigated within the context of liquid|liquid electrochemistry. Then, not only information about the speciation thermodynamics and kinetics is accessible, but also about the species lipophilicity. This provides a comprehensive view of their behaviour in natural and biological media. With the above aim, the current-potential response of the ACDT mechanism (aqueous complexation-dissociation coupled to transfer), where two chemically linked species can transfer between a hydrophilic and a lipophilic phase, is modelled in differential double pulse voltammetry (DDPV) and additive differential pulse voltammetry (ADPV). Explicit closed-form expressions are deduced for both techniques at liquid|liquid macrointerfaces, applicable to any charge number and lipophilicity of the species. The DDPV and ADPV signals are shown to be well sensitive to the features of the chemical reaction, as well as to the species charge and lipophilic character. Also, these techniques offer higher resolution and discrimination against superimposed signals than direct-current techniques, together with high sensitivity and minimization of capacitive effects and background currents, which are key advantages for accurate quantitative analysis.

     

Photoionization Mass Spectrometric and Kinetic Modeling of Low-pressure Pyrolysis of Benzene (cited: 3)

Pyrolysis of benzene at 30 Torr was studied from 1360 K to 1820 K in this work. Synchrotron vacuum ultraviolet photoionization mass spectrometry was employed to detect the pyroly-sis products such as radicals, isomers and polycyclic aromatic hydrocarbons, and measure their mole fraction profiles versus temperature. A low-pressure pyrolysis model of benzene was developed and validated by the experimental results. Rate of production analysis was performed to reveal the major reaction networks in both fuel decomposition and aromatic growth processes. It is concluded that benzene is mainly decomposed via H-abstraction reaction to produce phenyl and partly decomposed via unimolecular decomposition reac-tions to produce propargyl or phenyl. The decomposition process stops at the formation of acetylene and polyyne species like diacetylene and 1,3,5-hexatriyne due to their high thermal stabilities. Besides, the aromatic growth process in the low-pressure pyrolysis of benzene is concluded to initiate from benzene and phenyl, and is controlled by the even carbon growth mechanism due to the inhibited formation of C5 and C7 species which play important roles in the odd carbon growth mechanism.     

Speciation of Cr(III) and Cr(VI) using solid phase extraction and determination of total As inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometric (ICP-AES) method was developed for speciation and simultaneous determination of Cr and As, since these two analytes are commonly determined in various water samples in order to assess their toxicity. The objective of this research was to study the speciation of Cr(III), Cr(VI) in the presence of As(III) and/or As(V) using solid phase extraction (SPE) and ICP-AES. For these measurements, four spectral lines were used for each analyte with the purpose of selecting the most appropriate for each element. Finally with the use for first time of a cation-exchange column filled with benzosulfonic acid and elution with HCl, the speciation in solutions which contained [Cr(III)?+?Cr(VI)?+?As(V)] and [Cr(III)?+?Cr(VI)?+?As(III)] was examined. It was demonstrated that the separation of the two chromium species is almost quantitative and the simultaneous determination of chromium species and total arsenic analytes is possible, with very good performance characteristics. The estimated limits of detection for Cr(III), Cr(VI), As(III) and/or As(V) were 0.9?µg?L^?1, 1.1 µg?L^?1, 4.7 µg?L^?1 and 4.5 µg?L^?1 respectively, the calculated relative standard deviations (RSDs) were 3.8%, 4.1%, 5.2% and 5.1% respectively, and finally the accuracy of the methods was estimated using a certified aqueous reference material and found to be 5.6% and 4.8% for Cr(III) and Cr(VI) respectively. The method was applied to the routine analysis of various water samples.     

Cooking activities during the Middle Ages: organic residues in ceramic vessels from the Sant'Antimo Church (Piombino-Central Italy)

A combined gas chromatography-electron ionization (GC-EI), atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) and MS/MS approach has been used for characterizing organic residues of ceramic vessels of different forms and dimensions recovered from a vault of the apse of the 13th century church of Sant'Antimo in Piombino (Central Italy). The artifacts studied in this investigation are pots, jugs, colanders and pans probably used for cooking meals or as food containers. GC-MS has shown the presence of different fatty acids and other nonpolar markers, while APCI ionization proved to be particularly useful in the detection of diterpenoids and diacylglycerols. The data show that some organic markers may be of animal origin, while others are typical constituents or biodegradation products of vegetables. This allows one to propose the main use of these articles as vessels for cooking meat and maybe vegetable broths and soups. As there is no strict correlation between organic markers and shape, form and dimension of the ceramic vessel, it appears that the different objects probably served the same function. Chemical characterization of the organic residues of ceramic vessels, together with all the other archaeological data, contributes to a better understanding of their uses and the customs of people in the Middle Ages in Central Italy.     

Synthesis and structure of bis(tetraphenylantimony) malonate

Russian Chemical Bulletin - Bis(tetraphenylantimony) malonate was synthesized by the reaction of tetraphenylantimony bromide with silver malonate (the molar ratio was 2:1) in toluene. According to...     

Stability and Unimolecular Reactivity of Palladate(II) Complexes [LnPdR3]− (L=Phosphine,R=Organyl,n=0 and 1)

The reduction of Pd^II precatalysts to catalytically active Pd⁰ species is a key step in many palladium‐mediated cross‐coupling reactions. Besides phosphines, the stoichiometrically used organometallic reagents can afford this reduction, but do so in a poorly understood way. To elucidate the mechanism of this reaction, we have treated solutions of Pd(OAc)₂ and a phosphine ligand L in tetrahydrofuran with RMgCl (R=Ph, Bn, Bu) as well as other organometallic reagents. Analysis of these model systems by electrospray‐ ionization mass spectrometry found palladate(II) complexes [L_nPdR₃]^? (n=0 and 1), thus pointing to the occurrence of transmetallation reactions. Upon gas‐phase fragmentation, the [L_nPdR₃]^? anions preferentially underwent a reductive elimination to yield Pd⁰ species. The sequence of the transmetallation and reductive elimination, thus, constitutes a feasible mechanism for the reduction of the Pd(OAc)₂ precatalyst. Other species of interest observed include the Pd^IV complex [PdBn₅]^?, which did not fragment via a reductive elimination but lost BnH instead.     

Synthesis of Pyrrolophenanthridine Alkaloids Based on C(sp3)H and C(sp2)H Functionalization Reactions

Assoanine, pratosine, hippadine, and dehydroanhydrolycorine belong to the pyrrolophenanthridine family of alkaloids, which are isolated from plants of the Amaryllidaceae species. Structurally, these alkaloids are characterized by a tetracyclic skeleton that contains a biaryl moiety and an indole core, and compounds belonging to this class have received considerable interest from researchers in a number of fields because of their biological properties and the challenges associated with their synthesis. Herein, a strategy for the total synthesis of these alkaloids by using C? H activation chemistry is described. The tetracyclic skeleton was constructed in a stepwise manner by C(sp³)? H functionalization followed by a Catellani reaction, including C(sp²)? H functionalization. A one‐pot reaction involving both C(sp³)? H and C(sp²)? H functionalization was also attempted. This newly developed strategy is suitable for the facile preparation of various analogues because it uses simple starting materials and does not require protecting groups.     

Capillary electrophoresis inductively coupled plasma mass spectrometry

Chemical speciation (extraction of elemental information and identification of molecular environment for an analyte in a complex sample) has been a long sought after goal for analytical chemists. Recently, because of successful developments in more sensitive element-specific detectors and gentle separation schemes, which preserve the true chemical information in a real sample, routine speciation experiments are becoming a common occurrence in the scientific literature. For many reasons, the combination of capillary electrophoresis (for separation of different chemical species) with inductively coupled plasma mass spectrometry (for element and isotope specific detection) has emerged as the method of choice for these analyses. In this article the basic principles of capillary electrophoresis inductively coupled plasma mass spectrometry are discussed. Design consideration for instrument interface, anticipated difficulties with speciation experiments and applications for specific matrices and analytes are also presented in this article.     

Reactive intermediates in the reaction of hydrazinecarbothioamides with 2-(bis(methylthio)methylene)malononitrile and ethyl 2-cyano-3,3-bis(methylthio)acrylate

Research on Chemical Intermediates - The reaction of N-substituted hydrazinecarbothioamides with both 2-(bis(methylthio)methylene)malononitrile and ethyl 2-cyano-3,3-bis(methylthio)acrylate...     

Reactions of CH3SH and (CH3)2S2 on the (0001) and (000) Surfaces of ZnO

Temperature-programmed desorption (TPD) was used to study the adsorption and reaction of CH3SH and (CH3)2S2 on the (0001) and (000) surfaces of ZnO. The interaction of these molecules with ZnO was found to be structure-sensitive. Both CH3SH and (CH3)2S2 adsorb dissociatively on ZnO(0001), forming adsorbed methylthiolate intermediates and only molecularly on ZnO(000). In the case of CH3SH, this result is consistent with that reported previously for the interaction of Br?nsted acids with ZnO and indicates that exposed cation-anion pairs are the active sites for dissociative adsorption. Only exposed Zn cations are required for the dissociative adsorption of (CH3)2S2. Methylthiolate species produced by dissociative adsorption of CH3SH and (CH3)2S2 on ZnO(0001) were found to undergo a variety of reaction pathways, including coupling to produce dimethyl sulfide and oxidation to formaldehyde, CO, and CO2. Pathways for the production of these various products are proposed.