A new sensitive method for the spectrophotometric determination of molybdenum using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one

A spectrophotometric method has been developed for the determination of Molybdenum (VI) using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one as a complexing agent. The complex formed was dissolved in water in the presence of Triton X-100 and exhibits an absorption maximum at 410 nm. A large number of metal ions like Co(II), Ni(II), Mn(II), Cr(III), Zn(II), Cu(II), Hg(II), Bi(III), Fe(II), Fe(III), Zr(IV), V(V) can be tolerated at an appreciable concentrations. Molar absorptivity and Sandell's sensitivity of the method is 2.80 x 10(5) l mol-1cm-1 and 3.42 x 10(-4) micrograms cm-2, respectively. Beer's law is obeyed in the concentration range of 0.01-0.4 ppm Mo(VI). Aliquots containing 0.2 ppm of Mo(VI) give a mean absorbance of 0.56 with a relative standard deviation of 1.3%.     

Utility of NBD-Cl for the spectrophotometric determination of some skeletal muscle relaxant and antihistaminic drugs

A simple, accurate, precise and sensitive colorimetric method for the determination of some skeletal muscle relaxant drugs, namely orphenadrine citrate (I), baclofen (II), antihistaminic drugs as acrivastine (III) and fexofenadine hydrochloride (IV) is described. This method is based on the formation of charge transfer complex with 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) in non-aqueous medium. The orange color products were measured at 472, 465, 475 and 469 nm for drugs I, II, III and IV, respectively. The optimization of various experimental conditions was described. Beer's Law was obeyed in the range (2.5-17.5), (5-70), (2.5-25) and (10-50)microg/ml for drugs I, II, III and IV, respectively. The molar absorptivity (epsilon), sandell sensitivity, detection((LOD)) and quantitation limits((LOQ)) are calculated. The procedure was favorably applied for determination of certain pharmaceutical dosage forms containing the studied drugs. The obtained results were compared with the official and reported methods. There were no significant differences between proposed, reported and the official methods.     

Atomic Emission Spectrometric Determination of Antazoline,Hydralazine, Amiloride,Thiamine and Quinine Based on Formation of Ion Associates with Ammonium Reineckate.

Abstract

Ion-associate complexes of Antazoline HC1 (I), Hydralazine HC1 (II), Amiloride HC1 (III), Thiamine HC1 (IV) and Quinine sulphate (V) with ammonium reineckate were precipitated and their solubilities were studied as a function of pH, ionic strength and temperature. Saturated solutions of each ion-associate under the optimum precipitation conditions were prepared and the metal ion-content in the supernatent was determined. The solubility products were thus elucidated at different temperatures. A new accurate and precise method using direct coupled plasma-atomic emission spectrometry for the determination of the investigated drugs in pure solutions and in pharmaceutical preparations is described. The drugs can be determined by the present method in the ranges 0.3-3.0, 0.19-1.96, 0.3-3.0, 0.33-3.37 and 0.78-7.82 mg/25 ml solutions of I, II, III, IV and V, respectively.     

Water-soluble metal naphthalocyanines--near-IR photosensitizers: cellular uptake, toxicity and photosensitizing properties in NHIK 3025 human cancer cells

Metal naphthalocyanine complexes (MNCSs) absorb light in the near-IR spectral region (760 nm) where tissue penetration is optimal and they have been proposed as agents for photodynamic therapy (PDT). Sulphonated derivatives of tris-(2,3-naphthalocyanato) bis-chloroaluminium(III) and zinc(II) with various degrees of sulphonation were prepared. Cellular uptake, aggregation in cellular environments, cytotoxicity and photosensitizing properties were studied. Three of the four dyes studied were taken up by cells to a satisfactory degree and were not cytotoxic at the concentration used (10 micrograms ml-1). The least sulphonated sample of zinc naphthalocyanine produced some phototoxic effects (LD50 = 1.12 J cm-2). All the other samples of sulphonated naphthalocyanine were found to be aggregated inside the NHIK 3025 cells, preventing any significant PDT effect.     

Fe3(CO)12与P(NEt2)2Cl的反应--两核和三核铁羰基簇合衍生物的合成和晶体结构

Fe_3(CO)_(12)与配位基前体P(NEt_2)_2Cl反应,给出4个新的两核和三核铁羰基簇合衍生物:Fe_2(CO)_6(μ-Cl)[μ-P(NEt_2)_2](Ⅰ),Fe_2(CO)_6[μ-P(NEt_2)_2]_2(Ⅱ),Fe_3(CO)_9(μ-CO)(μ_3-PNEt_2)(Ⅲ)和Fe_3(CO)_9(μ_3-PNEt_2)[P(NEt_2)_3](Ⅳ)。在反应期间,配前体分子中的P-Cl和P-N键劈开,形成的分子片Cl、PNEt_2、P(NEt_2)_2和P(NEt_2)_3作为配体与铁羰合物重新组建成上述簇合物。利用X射线衍射法测定了它们的晶体结构。Ⅰ属三斜晶系,P1空间群,晶胞参数a=0.8745(6)nm,b=0.9601(7)nm,c=1.3996(10)nm,α=74.131(11)°,β=79.480(12)°,γ=69.727(12)°,V=1.0553(13)nm~3,D_c=1.543g·cm~(-3),Z=2,R=0.0443,wR=0.0831。Ⅱ属正交晶系,Pbcn空间群,晶胞参数a=1.0153(3)nm,b=1.7543(5)nm,c=1.6860(5)nm,V=3.0031(15)nm~3,D_c=1.394g·cm~(-3),Z=4,R=0.0519,wR=0.1035。Ⅲ属单斜晶系,P2_1/c空间群,晶胞参数a=1.0280(5)nm,b=1.2113(5)nm,c=1.9192(7)nm,β=93.560(7)°,V=2.1366(16)nm~3,D_c=1.712g·cm~(-3),Z=4。Ⅳ属单斜晶系,Cc空间群,晶胞参数a=1.5875(7)nm,b=1.0359(5)nm,C=2.1919(9)nm,β=101.266(8)°,V=3.535(3)nm~3,Dc=1.443g·cm~(-3),Z=4。Ⅰ和Ⅱ为两核铁簇,其簇骨架Fe_2PCl和Fe_2P_2呈蝶状。Ⅲ和Ⅳ     

Spectrophotometric determination of some drugs for osteoporosis

Three simple, accurate and sensitive spectrophotometric methods are developed for the determination of some new drugs for the treatment of osteoporosis: risedronate sodium (I), alendronate sodium (II) and etidronate disodium (III). The first method is based on the measurement of difference in absorbance (Delta A) of risedronate sodium in 0.01 mol l(-1) hydrochloric and 0.1 mol l(-1) sodium hydroxide at 262 nm. Beer's law is obeyed over a concentration range of 15-150 microg ml(-1) with mean recovery 99.75+/-1.22 and molar absorptivity (epsilon) 1.891 x 10(3). The second method is based on the reaction of the primary amino group of (II) with ninhydrin reagent in methanolic medium in the presence of 0.05 mol l(-1) sodium bicarbonate. The colored product is measured at 568 nm, and the linearity range is found to be 3.75-45 microg ml(-1) with mean recovery 99.77+/-0.73 and epsilon 9.425 x 10(3). The third method is based on oxidation of the three mentioned drugs with ceric (IV) sulphate in 0.5 mol l(-1) sulphuric acid at room temperature and subsequent measurement of the excess unreacted cerium (IV) sulphate at 320 nm. The method obeyed Beer's law over a concentration range of 2-24 microg ml(-1) for the three drugs with mean recovery 99.79+/-1.16, 99.73+/-1.38 and 99.86+/-1.13 and epsilon 14.427 x 10(3), 13.813 x 10(3) and 14.000 x 10(3) for drugs I, II, III respectively. The proposed methods were successfully applied for the determination of the studied drugs in bulk powder and in pharmaceutical formulations. The results were found to agree statistically with those obtained the reported methods. Furthermore, the methods were validated according to USP regulations and also assessed by applying the standard addition technique.     

New plastic membrane and carbon paste ion selective electrodes for the determination of triprolidine.

Triprolidine (Trip) ion selective electrodes of three types: the conventional polymer membrane (I), graphite coated electrode (II) and carbon paste electrode (III), have been prepared, based on the ion pair of triprolidine hydrochloride with sodium tetraphenylborate. The electrodes exhibit a linear response with a mean calibration graph slope of 56.12, 55.00 and 54.32 mV decade(-1) at 25 degrees C for I, II and III, respectively, within the concentration ranges 1.96 x 10(-5) - 1.00 x 10(-2) M for I and 3.84 x 10(-5) - 1.00 x 10(-2) M for II and III. The detection limits are 1.13+/-0.13 x 10(-5), 1.70+/-0.06 x 10(-5) and 1.78+/-0.05 x 10(-5) M for the three electrodes, respectively. The change of pH within the ranges 4.85 - 8.75 and 4.70 - 8.50 for I and III, respectively, did not affect the electrode performance. The standard electrode potentials were determined at different temperatures and were used to calculate the isothermal coefficient of the electrode. The electrodes showed a very good selectivity for Trip with respect to a large number of inorganic cations and compounds. The standard addition method was applied to the determination of TripCl in pure solution, pharmaceutical preparations, and urine samples.     

Spectrophotometric determination of four macrolide antibiotics in pharmaceutical formulations and biological fluids via binary complex formation with eosin [corrected

A simple, rapid, and sensitive validated spectrophotometric method was developed for the determination of certain macrolide antibiotics namely, erythromycin (I), azithromycin dihydrate (II), clarithromycin (III), and roxithromycin (IV) in bulk powders, pharmaceutical formulations, and spiked biological fluids. The proposed method is based on the formation of a binary complex between each of the studied drugs and eosin Y in aqueous buffered medium. Under the optimum conditions, the binary complexes showed absorption maxima at 542-544 nm. The absorbance of the binary complexes obeyed Beer's law over the concentration range of 1-10 micro/g/mL for II, 2-20 microg/mL for I and IV, and 3-30 microg/mL for III. The mean percentage recoveries were 100.04 +/- 0.83, 99.98 +/- 0.80, 100.17 +/- 0.91, and 99.55 +/- 0.91, with minimum detectable molarities of 2 x 10(-7) for I and II, 4 x 10(-7) for III, and 3 x 10(-7) for IV. The different experimental parameters affecting the development and stability of the colors were studied and optimized. The proposed method was successfully applied to the analysis of the cited drugs in some pharmaceutical formulations. The results obtained were in good agreement with those obtained using the reference methods. The proposed method was further applied to spiked human urine and plasma. A proposal of the reaction pathway is suggested.     

N,N-diethyl-N'-benzoylthiourea--a new spectrophotometric reagent for rhenium determination

The reagent N,N-diethyl-N'-benzoylthiourea produces a green complex with rhenium in hydrochloric acid medium in the presence of tin(II) chloride. The complex extracted into toluene shows an absorption maximum at 383 nm, obeys Beer's law from 1.5 to 22 micrograms ml-1 of rhenium while its molar absorptivity and Sandell sensitivity are 6.66 x 10(3) L mol-1 cm-1 and 0.028 microgram cm-2, respectively. It tolerates the presence of a large number of ions, including Mo(VI), W(VI) and some platinum metals. Job's and the mole ratio methods indicate that the rhenium metal and the chelating agent ratio of 1:2 in solution. The system has been applied to the determination of rhenium on synthetic samples and alumina based catalysts.     

On the preparation of coordination polymers by controlled thermal decomposition: synthesis, crystal structures, and thermal properties of zinc halide pyrazine coordination compounds

The five zinc(II) halide pyrazine coordination compounds poly-bis(mu2-pyrazine)-dichloro-zinc(II) (I), poly-(mu2-pyrazine-N,N')-dichloro-zinc(II) (II), poly-bis(mu2-pyrazine-N,N')-dibromo-zinc(II) (III), catena-(mu2-pyrazine-N,N')-dibromo-zinc(II) (IV), and catena-(mu-pyrazine)-diiodo-zinc(II) (V) were prepared by the reaction of ZnX2 (X = Cl, Br, I) with pyrazine in acetonitrile. In the crystal structure of compound I, the zinc atoms are coordinated by two chlorine atoms and two pyrazine ligands within distorted tetrahedra. The zinc atoms are linked by the N-donor ligands into layers. The crystal structure of compound III is very similar to that of compound I. The structure of compound III was originally reported in space group Ccca with similar a and b axes, but it was proved that the correct space group is I4/mmm. Ligand-poor compound V is isotypic to compound IV, in which ZnX2 units (X = Br, I) are connected by the pyrazine ligands into chains. It was originally reported in the noncentrosymmetric space group P2(1), but we found that the correct space group is P2(1)/m. If ligand-rich 1:2 compounds I and III are heated in a thermobalance, different mass steps are observed. We have proven that in the first step, ligand-poor compounds II and IV are formed in quantitative yields. On further heating, a second mass step occurs that leads to the formation of two new compounds of composition (ZnCl2)2(pyrazine) (VI) and (ZnBr2)2(pyrazine) (VII). However, the mass step is not well-resolved. and the new compounds are not phase-pure after the thermal event. If ligand-poor 1:1 compound V is investigated by thermogravimetry, a not-well-resolved single mass step is observed in which new ligand-poor 2:1 compound (ZnI2)2(pyrazine) (VIII) is formed. On further heating, all 2:1 compounds lose their remaining ligands and transform into the pure zinc(II) halides.     

Determination of dextromethorphan and metabolites in human plasma and urine by high-performance liquid chromatography with fluorescence detection

Sensitive methods were developed for the analysis of dextromethorphan (I) and two metabolites, (+)-17-methyl-morphinan-3-ol (II) and (+)-morphinan-3-ol (III), in plasma as well as dextromethorphan and three metabolites II, III and (+)-3-methoxymorphinan (IV) in urine using high-performance liquid chromatography followed by detection with a fluorometer. Dextromethorphan and its metabolites were extracted from plasma and urine and separated in the reversed-phase mode. The practical lower limits of determination for I, II, and III in plasma were 0.5, 5, and 5 ng/ml, respectively; for I, II, III, and IV in urine, the limits were 20 ng/ml, 0.6 microgram/ml, 0.5 microgram/ml, and 15 ng/ml, respectively. The linearity of the calibration graphs was excellent (r varied from 0.9994 to 0.9999) over concentration ranges of two orders of magnitude.     

Electron transfer. 157. Reactions of hypervalent manganese species with S(2) metal-ion reductants

Solutions of the complexes of hypervalent manganese, [Mn(III)(C(2)O(4))(3)](3)(-) (in oxalate buffers), [Mn(IV)(bigH)(3)](4+) (in biguanide buffers), and [(bipy)(2)Mn(III)(O)(2)Mn(IV)(bipy)(2)](3+) (in bipyridyl buffers) may be reduced by s(2) center reductants In(I), Sn(II), and Ge(II), yielding Mn(II) quantitatively. In all cases, rates are determined by the initial act of electron transfer, giving an s(1) transient (In(II), Sn(III), or Ge(III)); subsequent steps are rapid and kinetically silent. The In(I)-Mn(III) and Ge(II)-Mn(III) reactions are inhibited by added oxalate, whereas the Sn(II)-(Mn(III)Mn(IV)) reaction is strongly accelerated by Cl(-). The In(I)-Mn(IV) reaction is complicated by formation of a 1:1 addition compound In(I).Mn(IV). We find no evidence for two-unit steps in any of these systems.     

A highly sensitive spectrophotometric method for the determination of some phenothiazine antipsychotics using chloramine-T and indigocarmine.

A new simple, accurate and precise spectrophotometric method for the determination of six phenothiazine drugs in pure form and in dosage forms is described. The method is based on the oxidation of the studied drugs by a known excess of Chloramine-T in hydrochloric acid medium and subsequent determination of the unreacted oxidant by reacting it with indigocarmine in the same acid medium. The reacted oxidant corresponds to the drug content. The colored species exhibits maximum absorption at 610 nm. The apparent molar absorptivity values and Sandell sensitivity values are in the range 1.53 x 10(4)-2.96 x 10(4) l mol-1 cm-1 and 13.75-37.15 ng cm-2, respectively. The method is highly sensitive and suitable for 1-15 micrograms ml-1 concentrations with the detection limits being in the range, 0.0651-0.1724 microgram ml-1. The method was successfully applied to the studied drugs in their dosage forms. The results are reproducible within +/- 1% and compare favorably with those obtained by the procedures of the British Pharmacopeia.     

Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

Entwicklung und Eichung einer DTA-Apparatur für Temperaturen bis 1500°C

A laboratory-built DTA-apparatus was calibrated by means of enthalpies of fusion (I), lattice transitions (II), endothermic (III) and exothermic reactions (IV). The temperature-dependence of the factor of calibration A is characterized for reactions of types I and II up to 1500°, and for those of types III and IV up to 600°, by an equation of the formA=155.9+ 10^?7·T ³. The error of the enthalpies for reactions of types I, II and IV is 10%. The error can be larger for reactions of type III.     

反常蓝移单电子锂键Y…Li-CH3[Y=CH3, CH2CH3, CH(CH3)2, C(CH3)3]体系的结构与性质

在密度泛函理论B3LYP/6-311++G(d,p)及MP2/6-311++G(d,p)水平上研究了单电子锂键复合物Y…Li—CH3[Y=CH3, CH2CH3, CH(CH3)2, C(CH3)3]的结构与性质. 结果表明, 三种单电子锂键复合物H3CH2C…Li—CH3(II), (H3C)2HC…Li—CH3(III)和(H3C)3C…Li—CH3(IV)单电子锂键强度依II(-26.7 kJ·mol-1)相似文献   

Indirect fluorometric determination of diclofenac sodium.

A simple and easy method of analysis for diclofenac sodium is reported. A spectrofluorometric method for the microdetermination of diclofenac sodium has been developed through its reaction with cerium(IV) in an acidic solution and measurement of the fluorescence of the Ce(III) ions produced. Under the optimum experimental conditions for the oxidation reaction, 1.0 M H2SO4 with 90 min of heating time (100 degrees C), the range of application is 124.3-600 ng mL(-1) and the limit of detection is 72.7 ng mL(-1). The proposed method was applied to the determination of diclofenac sodium in pharmaceutical tablets. The results of the analysis show a good agreement with those obtained by the official USP 27 HPLC method.     

Determination of nickel in biological samples spectrophotometrically involving complexation reaction with some thiazolylazo compounds

Three new heterocyclic azo compounds, 5(2-benzothiazolylazo)2,2 biphenyldiol (I), 5-(2-benzothiazolylazo)-8-hydroxyquinolene (II) and 4-(2-benzothiazo-lylazo)3-hydroxy-2-naphthoic acid (III) were synthesized. The formation constant of the reagents in 30% (v/v) ethanol and reactions with various metal ions were studied. These reagents (I-III) reacts with nickel ion to form (2:1) colored complex with an absorption band at 604, 635 and 643 nm. The apparent stability constants and the optimum conditions for complete color development were investigated. Beer's law is obeyed over the concentration ranges of 0.05-3.50, 0.05-4.00 and 0.05-3.10 micrograms ml-1. For more accurate analyses, Ringbom optimum concentration ranges were found to be 0.20-3.25, 0.20-3.80 and 0.20-2.90 micrograms ml-1 using reagents I, II and III, respectively. The apparent molar absorptivity and Sandell sensitivity were also calculated. The interference of various foreign ions on the determination of nickel was investigated. The proposed method has been successfully applied to the determination of nickel substrates in various biological samples.     

Spectrophotometric determination of vanadium(V) in minerals, steels, soil and biological samples using phenothiazine derivatives.

Two simple, rapid and sensitive spectrophotometric methods have been proposed for the determination of vanadium(V) using butaperazine dimaleate (BPD) and propionyl promazine phosphate (PPP). These methods are based on the formation of red-colored radical cations on reaction with vanadium(V) in phosphoric acid medium, with their absorbance maxima at 513 nm. Beer's law is valid over the concentration range of 0.25-5.0 micrograms ml-1 and 0.2-4.0 micrograms ml-1, with Sandell's sensitivity values of 6.1 ng cm-2 and 6.0 ng cm-2 for BPD and PPP respectively. The proposed methods have been successfully applied to the analysis of vanadium steels, minerals, biological samples and soil samples.     

Use of tetracyanoplatinate (ii) for the luminescent detection of metalions

The tetracyanoplatinate(II) (TCP) ion forms insoluble fluorescent compounds with many metal ions. This property has not hitherto been exploited for analytical use. The soluble sodium TCP salt has been applied as a reagent for metal ion detection. Fluorescent precipitates useful for detection of the metal ions were obtained with Y(III), Zr(IV), Ag(I), Zn(II), Cd(II), Hg(I), Hg(II), A1(III), Pb(II), La(III) and Th(IV). Limits of detection ranged from 5 to 200 ppm. With ammonium acetate as a masking agent, selective detection of 10 ppm of silver was achieved in the presence of the other metal ions. As little as 20 ppm of zirconium can be detected in the presence of hafnium, which yields a non-fluorescent precipitate.