Cluster oxalate complexes [M3(mu3-Q)(mu2-Q2)3(C2O4)3]2- and [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2- (M = Mo, W; Q = S, Se): mechanochemical synthesis and crystal structure

Mechanochemical reaction of cluster coordination polymers 1infinity[M3Q7Br4] (M = Mo, W; Q = S, Se) with solid K2C2O4 leads to cluster core excision with the formation of anionic complexes [M3Q7(C2O4)3]2-. Extraction of the reaction mixture with water followed by crystallization gives crystalline K2[M3Q7(C2O4)3].0.5KBr.nH2O (M = Mo, Q = S, n = 3 (1); M = Mo, Q = Se, n = 4 (2); M = W, Q = S, n = 5 (3)). Cs2[Mo3S7(C2O4)3].0.5CsCl.3.5H2O (4) and (Et4N)1.5H0.5K{[Mo3S7(C2O4)3]Br}.2H2O (5) were also prepared. Close Q...Br contacts result in the formation of ionic triples {[M3Q7(C2O4)3](2)Br}5- in 1-4 and the 1:1 adduct {[Mo3S7(C2O4)3]Br}3- in 5. Treatment of 1 or 2 with PPh(3) leads to chalcogen abstraction with the formation of [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2-, isolated as (Ph4P)2[Mo3(mu3-S)(mu2-S)3(C2O4)3(H2O)3].11H2O (6) and (Ph4P2[Mo3(mu3-Se)(mu2-Se)3(C2O4)3(H2O)3].8.5H2O.0.5C2H5OH (7). All compounds were characterized by X-ray structure analysis. IR, Raman, electronic, and 77Se NMR spectra are also reported. Thermal decomposition of 1-3 was studied by thermogravimetry.     

Dichloro and alkylchloro gallium derivatives of dichalcogenoimidodiphosphinate ligands: isolation of a spirogallium cation

Dichloro and chloromethyl Ga(III) complexes of general formulae [XClGa-eta2-{R2P(E)NP(E'R'2-E,E'}](X = Cl, R, R'= Ph, E, E'= O (1), S (2), Se (3); R = Ph, R'= OEt, E = O, E'= S (4); R = Me, R'= Ph, E, E'= S (5) and X = Me, E, E'= O (6), S (7), Se (8)) were synthesised by either metathesis reactions between GaCl3 and the potassium salt of the ligand (X = Cl) or by methane eliminations from in situ prepared GaMe2Cl and the protonated ligands LH (X = Me). Redistribution reaction of (3) in either CDCl3 or THF afforded the solvent-free tetracoordinate gallium spirocycle cation [Ga-{eta2-{Ph2P(Se)NP(Se)Ph2-Se,Se'})2]+ (9+). The molecular structures of complexes 2, 4, 5, 7 and 9(+) show non-planar gallacycle rings.     

Syntheses and structures of P-anilino-P-chalcogeno- and P-anilino-P-iminodiazasilaphosphetidines and their group 12 and 13 metal compounds

The P-anilino-P-chalcogeno(imino)diazasilaphosphetidines [Me(2)Si(mu-N(t)Bu)(2)P=E(NHPh)] (E = O (3), S (4), Se (5), N-p-tolyl (6)) were synthesized by oxidizing the P-anilinodiazasilaphosphetidine [Me(2)Si(N(t)Bu)(2)P(NHPh)] (2) with cumene hydroperoxide, sulfur, selenium, and p-tolyl azide, respectively. The lithium salt of 4 reacted with thallium monochloride to produce ([Me(2)Si(mu-N(t)Bu)(2)P=S(NPh)-kappaN-kappaS]Tl)(7), which features a two-coordinate thallium atom. Treatment of 4-6 with AlMe(3) gave the monoligand dimethylaluminum complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE]AlMe(2)) (E = S (8), Se (9), N-p-tolyl (10)), respectively. In these complexes the aluminum atom is tetrahedrally coordinated by one chelating ligand and two methyl groups, as a single-crystal X-ray analysis of 8 showed. A 2 equiv amount of 4-6 reacted with diethylzinc to produce the homoleptic diligand complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE](2)Zn)(E = S (11), Se (12), N-p-tolyl (13)). A crystal-structure analysis of 11 revealed a linear tetraspirocycle with a tetrahedrally coordinated, central zinc atom.     

Soluble yttrium chalcogenides: syntheses,structures, and NMR properties of Y[eta 3-N(SPPh2)2]3 and Y[eta 2-N(SePPh2)2]2[eta 3-N(SePPh2)2

The compounds Y[N(QPPh2)2]3 (Q = S (1), Se (2)) have been synthesized in good yield from the protonolysis reactions between Y[N(SiMe3)2]3 and HN(QPPh2)2 in methylene chloride (CH2Cl2). The compounds are not isostructural. In 1, the Y atom is surrounded by three similar [N(SPPh2)2]- ligands bound eta 3 through two S atoms and an N atom. The molecule possesses D3 symmetry, as determined in the solid state by X-ray crystallography and in solution by 89Y and 31P NMR spectroscopies. In 2, the Y atom is surrounded again by three [N(SePPh2)2]- ligands, but two are bound eta 2 through the two Se atoms and the other ligand is bound eta 3 through the two Se atoms and an N atom. Although a fluxional process is detected in the 31P and 77Se NMR spectra, a triplet is found in the 89Y NMR spectrum of 2 (delta = 436 ppm relative to YCl3 in D2O, 2JY-P = 5 Hz). This implies that on average the conformation of one eta 3- and two eta 2-bound ligands is retained in solution. Crystallographic data for 1: C72H60N3P6S6Y, rhombohedral, R3c, a = 14.927(5) A, c = 56.047(13) A, V = 10815(6) A3, T = 153 K, Z = 6, and R1(F) = 0.042 for the 1451 reflections with I > 2 sigma(I). Crystallographic data for 2: C72H60N3P6Se6Y.Ch2-Cl2, monoclinic, P2(1)n, a = 13.3511(17) A, b = 38.539(7) A, c = 14.108(2) A, beta = 94.085(13) degrees, V = 7241(2) A 3, T = 153 K, Z = 4, and R1(F) = 0.037 for the 8868 reflections with I > 2 sigma(I).     

Reactivity of the isolable disilene R*PhSi=SiPhR* (R* = SitBu3)

The disilene R*PhSi=SiPhR* (R* = supersilyl = SitBu3), which can be quantitatively prepared by dehalogenation of the disilane R*PhClSi-SiBrPhR* with NaR* (yellow, water- and air-sensitive crystals; decomp at ca. 70 degrees C; Si=Si distance 2.182 A), is comparatively reactive. It transforms 1) with Cl2, Br2, HCl, HBr, and HOH under 1,2-addition into disilanes R*PhXSi-SiX'PhR* (X/X' = Hal/Hal, H/Hal, H/OH), 2) with O2, S8, and Sen under insertion into 1,3-disiletanes R*PhSi(-Y-)2SiPhR* (Y = O, S, Se), 3) with Me2C=CH2 under ene reaction into the disilane R*PhRSi-SiHPhR* (R = CH2-CMe=CH2), 4) with N2O, Ten, tBuN identical to C, and Me3SiN=N=N under [2 + 1] cycloaddition into disiliranes -R*PhSi-Y-SiPhR*- (Y = O, Te, C=NtBu, NSiMe3; P4 adds 2 molecules of disilene), 5) with CO2, COS, PhCHO, and Ph2CS under [2 + 2] cycloaddition into disiletanes -R*PhSi-SiPhR*-Y-CO- (Y = O, S) as well as -R*PhSi-SiPhR*-Y-CRPh- (Y/R = O/H, S/Ph), 6) with CS2 and CSe2 under [2 + 3] cycloaddition into ethenes R*2Ph2Si2Y2C = CY2Si2Ph2R*2 (Y = S, Se), and 7) with CH2 = CMe-CMe=CH2 and Ph2CO under [2 + 4] cycloaddition into "Diels-Alder adducts". X-ray structure analyses of seven of these compounds are presented.     

Orthopalladation of iminophosphoranes: synthesis, structure and study of stability

The reaction of Pd(OAc)(2) with polyfunctional iminophosphoranes Ph(3)P=NCH(2)CO(2)Me (1a), Ph(3)P=NCH(2)C(O)NMe(2) (1b), Ph(3)P=NCH(2)CH(2)SMe (1c) and Ph(3)P=NCH(2)-2-NC(5)H(4) (1d), gives the orthopalladated dinuclear complex [Pd(mu-Cl){C(6)H(4)(PPh(2)=NCH(2)CO(2)Me-kappa-C,N)-2}](2) (2a) and the mononuclear derivatives [PdCl{C(6)H(4)(PPh(2)=NCH(2)CONMe(2)-kappa-C,N,O)-2}] (2b), [PdCl{C(6)H(4)(PPh(2)=NCH(2)CH(2)SMe-kappa-C,N,S)-2}] (2c) and [PdCl{C(6)H(4)(PPh(2)=NCH(2)-2-NC(5)H(4)-kappa-C,N,N)-2}] (2d). The reaction implies the activation of a C-H bond in a phenyl ring of the phosphonium group, this fact being worthy of note due to the strongly deactivating nature of the phosphonium unit. The palladacycle containing the metallated carbon atom is remarkably stable toward the coordination of incoming ligands, while that formed by the iminic N atom and another heteroatom (O, 2a and 2b; S, 2c; N, 2d) is less stable and the resulting complexes can be considered as hemilabile. The X-ray crystal structures of the cyclopalladated [Pd(mu-Cl){C(6)H(4)(PPh(2)=NCH(2)CO(2)Me-kappa-C,N)-2}](2) (2a), [PdCl{C(6)H(4)(PPh(2)=NCH(2)-2-NC(5)H(4)-kappa-C,N,N)-2}] (2d), [Pd{C(6)H(4)(PPh(2)=NCH(2)CONMe(2)-kappa-C,N,O)-2}(NCMe)](ClO(4)) (7b) and [Pd{C(6)H(4)(PPh(2)NCH(2)CONMe(2)-kappa-C,N,O)-2}(py)](ClO(4)) (3b), and the coordination compound cis-[Pd(Cl)(2)(Ph(3)P=NCH(2)CH(2)SMe-kappa-N,S)] (8) are also reported.     

Intensely luminescent gold(I)-silver(I) cluster complexes with tunable structural features

A new series of isostructural, brilliantly luminescent gold-silver complexes having the formula [Au3(mu3-E)Ag(PPh2py)3](BF4)2 where E = O, S, Se and Ph2Ppy = 2-diphenylphosphinopyridine has been synthesized and characterized. The structural core of these complexes is a Au3Ag metallophilically linked tetrahedron with a group-16 atom functioning as a mu3-ligand capping the three gold atoms. In the solid state, pairs of clusters are joined by two unsupported aurophilic interactions. The emission energy changes strikingly in going from O (blue) to S (yellow) and Se (orange). The luminescence from the E = O system is the first to be reported for a gold(I) oxo system. Additionally, the luminescent 4-methylpyridyl analogue with E = S has been prepared and structurally characterized. For E = S, Se, the change in emission energy with mu3-bridging atom provides a sound basis for an LMMCT assignment of the excited state while lifetime measurements support its spin-forbidden nature. Frozen glass measurements indicate the presence of a higher-energy emitting state for these systems, and for the E = O system, either LMMCT or metal-centered cluster-based emission can be proposed.     

Formation of N-bridgehead 1,2,5-thiadiazolium and selenadiazolium rings through an intramolecular cyclisation reaction

Treatment of N-lithiopyridylketimide derivatives Li[R(C=N)py] (R=Ph, py) with ECl(2) (E=S, Se) affords the fused thiadiazolium and selenadiazolium salts [RC(6)H(4)N(2)E]Cl [1]Cl and [2]Cl containing a bridgehead N atom through intramolecular coordination.     

Reactivity of the heterometallic clusters [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides, including selenium transfer. Crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)], [MCo2(mu3-Se)(CO)7(mu-dppy)], and [RuCo2(mu3-Se)(CO)7(mu-dppm)] [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2

The reactivity of [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides such as Ph3PSe, Ph2P(Se)CH2PPh2, Ph2(2-C5H4N)PSe, Ph2(2-C4H3S)PSe, and Ph2[(2-C5H4N)(2-C4H2S)]PSe has been studied with the aim to obtain new selenido-carbonyl bimetallic clusters. The reactions of the hydrido clusters give two main classes of products: (i) triangular clusters with a mu3-Se capping ligand of the type [MCo2(mu3-Se)(CO)(9-x)L(y)] resulting from the selenium transfer (x = y = 1, 2, with L = monodentate ligand; x = 2, 4, and y = 1, 2, with L = bidentate ligand) (M = Fe, Ru) and (ii) tetranuclear clusters of the type [HMCo3(CO)12xL(y)] obtained by simple substitution of axial, Co-bound carbonyl groups by the deselenized phosphine ligand. The crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)] (1), [MCo2(mu3-Se)(CO)7(mu-dppy)] (M = Fe (16) or Ru (2)), and [RuCo2(mu3-Se)(CO)7(mu-dppm)] (12) are reported [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2]. Clusters 2, 12, and 16 are the first examples of trinuclear bimetallic selenido clusters substituted by phosphines. Their core consists of metal triangles capped by a mu3-selenium atom with the bidentate ligand bridging two metals in equatorial positions. The core of cluster 1 consists of a RuCo3 tetrahedron, each Co-Co bond being bridged by a carbonyl group and one further bridged by a dppy ligand. The coordination of dppy in a pseudoaxial position causes the migration of the hydride ligand to the Ru(mu-H)Co edge. In contrast to the reactions of the hydrido clusters, those with the anionic clusters [MCo3(CO)12]- do not lead to Se transfer from phosphorus to the cluster but only to CO substitution by the deselenized phosphine.     

Two-, three-, and four-coordination at gold(I) supported by the bidentate selenium ligand [Ph2P(Se)NP(Se)Ph2](-)

Treatment of the gold(I) halide complexes LAuCl (L = PMe3, PPh3, CNC6H3Me2-2,6) with K[Ph2P(Se)NP(Se)Ph2] provides the gold-selenium coordination compounds [(N(Ph2PSe)2-Se,Se')AuL]. However, on standing for a number of days, the complex [(N(Ph2PSe)2-Se,Se')AuPMe3] gains a phosphine to provide the bis(phosphine) species [(N(Ph2PSe)2-Se,Se')Au(PMe3)2]. Treatment of the K[Ph2P(Se)NP(Se)Ph2] ligand with [(Ph3PAu)3O]BF4 allows the isolation of [(N(Ph2PSe)2-Se,Se')(AuPPh3)2]BF4. Reaction of the complex [(dppm)(AuCl)2] with AgSO3CF3 followed by addition of the ligand K[Ph2P(Se)NP(Se)Ph2] results in the formation of [(N(Ph2PSe)2-Se,Se')Au2(dppm)]OSO2CF3 and treatment of [(tht)AuCl] (tht = tetrahydrothiophene) with an equimolar quantity of K[Ph2P(Se)NP(Se)Ph2] affords the complex [(N(Ph2PSe)2-Se,Se')2Au2]. The compounds [(N(Ph2PSe)2-Se,Se')Au2(dppm)]OSO2CF3, [(N(Ph2PSe)2-Se,Se')AuPPh3] and [(N(Ph2PSe)2-Se,Se')Au(PMe3)2] have been investigated crystallographically. The results reveal that the metal centers are two-, three-, and four-coordinate, respectively. The cationic, eight-membered ring complex bearing the dppm ligand displays transannular aurophilic bonding and is further associated into dimers via intermolecular gold-selenium contacts. The six-membered rings in the other two structures have C2-symmetrical twist conformations, however, the Au(I) coordination sphere in [N(PPh2Se)2]AuPPh3 is not fully symmetrical. The Au-Se bond lengths increase dramatically as the coordination number of the metal atom becomes larger.     

Syntheses and structures of heterometallic clusters by the reaction of o-carboranyl cobaltadichalcogenolato complexes

Metalladichalcogenolate cluster complexes [Cp'Co{E(2)C(2)(B(10)H(10))}]{Co2(CO)5} [Cp' = eta5-C5H5, E = S(3a), E = Se(3b); Cp' = eta5-C5(CH3)5, E = S(4a), E = Se(4b)], {CpCo[E(2)C(2)(B(10)H(10))]}(2)Mo(CO)2] [E = S(5a), Se(5b)], Cp*Co(micro2-CO)Mo(CO)(py)2[E(2)C(2)(B(10)H(10))] [E = S(6a), Se(6b)], Cp*Co[E(2)C(2)(B(10)H(10))]Mo(CO)2[E(2)C(2)(B(10)H(10))] [E = S(7a), Se(7b)], (Cp'Co[E(2)C(2)(B(10)H(10))]W(CO)2 [E(2)C(2)(B(10)H(10))] [Cp' = eta5-C5H5, E = S(8a), E = Se(8b); Cp' = eta5-C5(CH3)5, E = S(9a), E = Se(9b)], {CpCo[E(2)C(2)(B(10)H(10))]}(2)Ni [E = S(10a), Se(10b)] and 3,4-(PhCN(4)S)-3,1,2-[PhCN(4)SCo(Cp)S(2)]-3,1,2-CoC(2)B(9)H(8) 12 were synthesized by the reaction of [Cp'CoE(2)C(2)(B(10)H(10))] [Cp' = eta5-C5H5, E = S(1a), E = Se(1b); Cp' = eta5-C5(CH3)5, E = S(2a), E = Se(2b)] with Co2(CO)8, M(CO)3(py)3 (M = Mo, W), Ni(COD)2, [Rh(COD)Cl]2, and LiSCN4Ph respectively. Their spectrum analyses and crystal structures were investigated. In this series of multinuclear complexes, 3a,b and 4a,b contain a closed Co3 triangular geometry, while in complexes 5a-7b three different structures were obtained, the tungsten-cobalt mixed-metal complexes have only the binuclear structure, and the nickel-cobalt complexes were obtained in the trinuclear form. A novel structure was found in metallacarborane complex 12, with a B-S bond formed at the B(7) site. The molecular structures of 4a, 5a, 6a, 7b, 9a, 9b, 10a and 12 have been determined by X-ray crystallography.     

Syntheses of novel exo and endo isomers of ansa-substituted fluorophosphazenes and their facile transformations into spiro isomers in the presence of fluoride ions

Reactions of the dilithiated diols RCH2P(S)(CH2OLi)2 [R = Fc (1), Ph (2) (Fc = ferrocenyl)] with N3P3F6 in equimolar ratios at -80 degrees C result exclusively in the formation of two structural isomers of ansa-substituted compounds, endo-RCH2P(S)(CH2O)2[P(F)N]2(F2PN) [R = Fc (3a), Ph (4a)] and exo-RCH2P(S)(CH2O)2[P(F)N]2(F2PN) [R = Fc (3b), Ph (4b)], which are separated by column chromatography. Increasing the reaction temperature to -40 degrees C results in more of the exo isomers 3b and 4b at the expense of the endo isomers. The formation of the ansa-substituted compounds is found to depend on the dilithiation of the diols, as a reaction of the silylated phosphine sulfide FcCH2P(S)(CH2OSiMe3)2 (5) with N3P3F6 in the presence of CsF does not yield either 3a or 3b but instead gives the spiro isomer [FcCH2P(S)(CH2O)2 PN](F2PN)2 (6) as the disubstitution product of N3P3F6. The ansa isomers 3a and 3b are transformed into the spiro compound 6 in the presence of catalytic amounts of CsF at room temperature in THF, while 4a and 4b are transformed into the spiro compound [PhCH2P(S)(CH2O)2PN](F2PN)2 (7) under similar conditions. The novel conversions of ansa-substituted phosphazenes into spirocyclic phosphazenes were monitored by time-dependent 31P NMR spectroscopy. The effect of temperature on a transformation was studied by carrying out reactions at various temperatures in the range from -60 to +33 degrees C for 3b. In addition, compounds 3a, 3b, 4a, and 6 were structurally characterized. In the case of the ansa compounds, the nitrogen atom flanked by the bridging phosphorus sites was found to deviate significantly from the plane defined by the five remaining atoms of the phosphazene ring.     

Uncommon coordination behaviour of P(S) and P(Se) units when bonded to carboranyl clusters: experimental and computational studies on the oxidation of carboranyl phosphine ligands

Oxidation of closo-carboranyl diphosphines 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr) and closo-carboranyl monophosphines 1-PR(2)-2-R'-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr, Cy; R'=Me, Ph) with hydrogen peroxide, sulfur and elemental black selenium evidences the unique capacity of the closo-carborane cluster to produce uncommon or unprecedented P/P(E) (E=S, Se) and P=O/P=S chelating ligands. When H(2)O(2) reacts with 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr), they are oxidized to 1,2-(OPR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr). However, when S and Se are used, different reactivity is found for 1,2-(PPh(2))(2)-1,2-closo-C(2)B(10)H(10) and 1,2-(PiPr(2))(2)-1,2-closo-C(2)B(10)H(10). The reaction with sulfur produces mono- and dioxidation products for R=Ph, whereas Se produces the mono-oxidation product only. For R=iPr, only monooxidation takes place with S, and the second C(c)-PiPr(2) bond breaks to yield 1-SPiPr(2)-1,2-closo-C(2)B(10)H(11). When Se is used, only 1-SePiPr(2)-1,2-closo-C(2)B(10)H(11) is formed. The potential of the mono-chalcogenide carboranyl diphosphines 1-EPPh(2)-2-PPh(2)-1,2-closo-C(2)B(10)H(10) (E=S, 9; Se, 15) to behave as unsymmetric chelating bidentate ligands was studied for different metal complexes, different solvents and in the solid state. Dechalcogenation takes place in each case. Computational studies provided information on the P=E (E=S, Se) bonds. Steric effects block the bonding ability of the P=E group due to interactions between the chalcogen and the neighbouring hydrogen atoms (three from the phenyl rings and one from the carborane cluster). The electronic effects originate from the strongly electron-withdrawing character of the closo carborane cluster, which polarizes the P=E (E=S, Se) bond towards the phosphorus atom. As a consequence, the E atom is the electron-poor site and the P atom the electron-rich site in the P=E bond.     

Hydroxide-promoted core conversions of molybdenum-iron-sulfur edge-bridged double cubanes: oxygen-ligated topological PN clusters

The occurrence of a heteroatom X (C, N, or O) in the MoFe7S9X core of the iron-molybdenum cofactor of nitrogenase has encouraged synthetic attempts to prepare high-nuclearity M-Fe-S-X clusters containing such atoms. We have previously shown that reaction of the edge-bridged double cubane [(Tp)2Mo2Fe6S8(PEt3)4] (1) with nucleophiles HQ- affords the clusters [(Tp)2Mo2Fe6S8Q(QH)2](3-) (Q = S, Se) in which HQ- is a terminal ligand and Q(2-) is a mu2-bridging atom in the core. Reactions with OH- used as such or oxygen nucleophiles generated in acetonitrile from (Bu3Sn)2O or Me3SnOH and fluoride were examined. Reaction of 1 with Et4NOH in acetonitrile/water generates [(Tp)2Mo2Fe6S9(OH)2]3- (3), isolated as [(Tp)2Mo2Fe6S9(OH)(OC(=NH)Me)(H2O)](3-) and shown to have the [Mo2Fe6(mu2-S)2(mu3-S)6(mu6-S)] core topology very similar to the P(N) cluster of nitrogenase. The reaction system 1/Et4NOH in acetonitrile/methanol yields the P(N)-type cluster [(Tp)2Mo2Fe6S9(OMe)2(H2O)](3-) (5). The system 1/Me3SnOH/F- affords the oxo-bridged double P(N)-type cluster {[(Tp)2Mo2Fe6S9(mu2-O)]2}5- (7), convertible to the oxidized cluster {[(Tp)2Mo2Fe6S9(mu2-O)]2}4- (6), which is prepared independently from [(Tp)2Mo2Fe6S9F2(H2O)](3-)/(Bu3Sn)2O. In the preparations of 3-5 and 7, hydroxide liberates sulfide from 1 leading to the formation of P(N)-type clusters. Unlike reactions with HQ-, no oxygen atoms are integrated into the core structures of the products. However, the half-dimer composition [Mo2Fe6S9O] relates to the MoFe7S9 constitution of the putative native cluster with X = O. (Tp = hydrotris(pyrazolyl) borate(1-)).     

Dicoordinate copper(I) silanechalcogenolates

The copper silanechalcogenolates tBu3PCuESiPh3 (1, E = O; 2, E = S; 3, E = Se) were prepared from the reaction of [tBu3PCu(CH3CN)3]BF4 with [Ph3SiELi(THF)2]2 in acetonitrile. The compounds were obtained as colorless, crystalline, but thermally labile solids. X-ray crystallography shows that complexes 1-3 are monomeric in the solid state with no Cu...Cu interactions. The Cu atoms have either a linear or a near-linear coordination geometry in all three complexes. Interestingly, the O atom in complex 1 is also linear, which is in contrast to the highly bent S (2) and Se analogues (3). Density functional theory calculations suggest that both the linear geometry of 1 and an associated extremely short Cu-O distance [1.769(4) A] are not the result of pi delocalization but are the result of a fine balance of electrostatic interaction and Pauli repulsion.     

Lanthanide chalcogenolate complexes: synthesis and crystal structures of the isoleptic series [Sm(TpMe,Me)2ER] (E = O, S, Se, Te; TpMe,Me = tris-3,5-dimethylpyrazolylborate)

A series of lanthanide complexes containing a chalcogenolate ligand supported by two TpMe,Me (tris-3,5-dimethylpyrazolylborate) groups has been prepared and crystallized and provides direct comparisons of bonding to hard and soft ligands at lanthanide centers. Reaction of [Sm(TpMe,Me)2Cl] with NaOR (R = Ph, Ph-Bu(t)) gives [Sm(TpMe,Me)2OR] (1a and 1b, respectively) in good yields. Reductive cleavage of dichalcogenides by samarium(II) was used to prepare the heavier congeners. Complexes of the type [Sm(TpMe,Me)2ER] for E = S, R = Ph (2a), E = S, R = Ph-4-Me (2b), E = S, R = CH2Ph (2c), E = Se, R = Ph (3a), E = Se, R = Ph-4-Bu(t) (3b), E = Se, R = CH2Ph (3c), and E = Te, R = Ph (4) have been prepared together with the corresponding complexes with TpMe,Me,4-Et as ancillary. The X-ray crystal structures of 1b, 2b, 3a, 3b, and 4 have been determined. The crystal of 1b (C40H57B2N12OSm.C7H8) was monoclinic, P2(1)/c, a = 10.6845(6) A, b = 18.5573(11) A, c = 24.4075(14) A, beta = 91.616(2) degrees, Z = 4. The crystal of 2b (C37H51B2N12SSm) was monoclinic, P2(1)/n, a = 15.0154(9) A, b = 13.1853(8) A, c = 21.1254(13) A, beta = 108.628(2) degrees, Z = 4. The crystal of 3a (C36H49B2N12SeSm.C7H8) was triclinic, P1, a = 10.7819(6) A, b = 19.3011(10) A, c = 23.0235(12) A, alpha = 79.443(2) degrees, beta = 77.428(2) degrees, gamma = 89.827(2) degrees, Z = 4. The crystal of 3b (C40H57B2N12SeSm) was triclinic, P1, a = 10.1801(6) A, b = 10.2622(6) A, c = 23.4367(14) A, alpha = 88.313(2) degrees, beta = 86.268(2) degrees, gamma = 62.503(2) degrees, Z = 2. The crystal of 4 (C36H49B2N12TeSm.C7H8) was monoclinic, P2(1)/c, a = 18.7440(10) A, b = 10.3892(6) A, c = 23.8351(13) A, beta = 94.854(2) degrees, Z = 4. The compounds form an isoleptic series of seven-coordinate complexes with terminal chalcogenolate ligands. Examination of 1b and other crystallographically characterized lanthanide alkoxides suggests that there is little correlation between bond angle and bond length. The structures of 3a and 3b, however, contain molecules in which one of the pyrazolylborate ligands undergoes a major distortion arising from twisting around a B-N bond so as to give an effectively eight-coordinate complex with pi-stacking of the phenyl group with one pyrazolyl ring. These distortions shed light on the fluxionality of these systems.     

Synthesis and structural characterization of a new series of vanadoselenites, [Se(x)V(4-x)O(12-x)](4-x)- (x=1,2)

Two new vanadoselenites, [SeV(3)O(11)](3)(-) and [Se(2)V(2)O(10)](2)(-), were synthesized by reacting SeO(2) with VO(3)(-). Single-crystal X-ray structural analyses of [(n-C(4)H(9))(4)N](3)[SeV(3)O(11)].0.5H(2)O [orthorhombic, space group P2(1)2(1)2, a = 22.328(5) A, b = 44.099(9) A, c = 12.287(3) A, Z = 8] and [[(C(6)H(5))(3)P](2)N](2)[Se(2)V(2)O(10)] [monoclinic, space group P2(1)/n, a = 12.2931(3) A, b = 13.5101(3) A, c = 20.9793(5) A, beta = 106.307(1) degrees, Z = 2] revealed that both anions are composed of Se(x)()V(4)(-)(x)()O(4) rings. The (51)V, (77)Se, and (17)O NMR spectra established that both [SeV(3)O(11)](3)(-) and [Se(2)V(2)O(10)](2)(-) anions maintain this ring structure in solution.     

Thorium oxo and sulfido metallocenes: synthesis, structure, reactivity, and computational studies

The synthesis, structure, and reactivity of thorium oxo and sulfido metallocenes have been comprehensively studied. Heating of an equimolar mixture of the dimethyl metallocene [η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)](2)ThMe(2) (2) and the bis-amide metallocene [η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)](2)Th(NH-p-tolyl)(2) (3) in refluxing toluene results in the base-free imido thorium metallocene, [η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)](2)Th═N(p-tolyl) (4), which is a useful precursor for the preparation of oxo and sulfido thorium metallocenes [η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)](2)Th═E (E = O (5) and S (15)) by cycloaddition-elimination reaction with Ph(2)C═E (E = O, S) or CS(2). The oxo metallocene 5 acts as a nucleophile toward alkylsilyl halides, while sulfido metallocene 15 does not. The oxo metallocene 5 and sulfido metallocene 15 undergo a [2 + 2] cycloaddition reaction with Ph(2)CO, CS(2), or Ph(2)CS, but they show no reactivity with alkynes. Density functional theory (DFT) studies provide insights into the subtle interplay between steric and electronic effects and rationalize the experimentally observed reactivity patterns. A comparison between Th, U, and group 4 elements shows that Th(4+) behaves more like an actinide than a transition metal.     

Tetranuclear manganese carboxylate complexes with a trigonal pyramidal metal topology via controlled potential electrolysis

Controlled potential electrolysis (CPE) procedures are described that provide access to complexes with a [Mn4(mu 3-O)3(mu 3-O2CR)]6+ core (3MnIII,MnIV) and a trigonal pyramidal metal topology, starting from species containing the [Mn4(mu 3-O)2]8+ core (4MnIII). [Mn4O2(O2CMe)6(py)2(dbm)2] (6): triclinic, P1, a = 10.868(3) A, b = 13.864(3) A, c = 10.625(3) A, alpha = 108.62(1) degrees, beta = 118.98(1) degrees, gamma = 89.34(2) degrees, V = 1307 A3, Z = 1, T = -131 degrees C, R (Rw) = 3.24 (3.70)%. [Mn4O2(O2CPh)6(py)(dbm)2] (8): monoclinic, P2(1)/c, a = 14.743(6) A, b = 15.536(8) A, c = 30.006(13) A, beta = 102.79(1) degrees, V = 6702 A3, Z = 4, T = -155 degrees C, R (Rw) = 4.32 (4.44)%. Both 6 and 8 contain a [Mn4O2]8+ core; 8 only has one py group, the fourth MnIII site being five-coordinate. (NBun4)[Mn4O2(O2CPh)7(dbm)2] (10) is available from two related procedures. CPE of 10 at 0.65 V vs ferocene in MeCN leads to precipitation of [Mn4O3(O2CPh)4(dbm)3] (11); similarly, CPE of 6 at 0.84 V in MeCN/CH2Cl2 (3:1 v/v) gives [Mn4O3(O2CMe)4(dbm)3] (12). Complex 11: monoclinic, P2(1)/n, a = 15.161(3) A, b = 21.577(4) A, c = 22.683(5) A, beta = 108.04(3) degrees, V = 7056 A3, Z = 4, T = -100 degrees C, R (wR2) = 8.63 (21.80)%. Complex 12: monoclinic, P2(1)/n, a = 13.549(2) A, b = 22.338(4) A, c = 16.618(2) A, beta = 103.74(1) degrees, V = 4885 A3, Z = 4, T = -171 degrees C, R (Rw) = 4.63 (4.45)%. Both 11 and 12 contain a [Mn4(mu 3-O)3(mu-O2CR)] core with a Mn4 trigonal pyramid (MnIV at the apex) and the RCO2- bridging the MnIII3 base. However, in 11, the carboxylate is eta 2,mu 3 with one O atom terminal to one MnIII and the other O atom bridging the other two MnIII ions, whereas in 12 the carboxylate is eta 1,mu 3, a single O atom bridging three MnIII ions. Variable-temperature, solid-state magnetic susceptibility studies on 11 and 12 show that, for both complexes, there are antiferromagnetic exchange interactions between MnIII/MnIV pairs, and ferromagnetic interactions between MnIII/MnIII pairs. In both cases, the resultant ground states of the complex is S = 9/2, confirmed by magnetization vs field studies in the 2.00-30.0 K and 0.50-50 kG temperature and field ranges, respectively.     

Synthesis and structures of beta-diketiminatotin(II) halides, an amide and of Sn(=E)[{N(R)C(Ph)}2CH](NR2) (E = S or Se, R = SiMe3)

Treatment of [Li(L1)]2 (1) or K(L2) (2) with SnX2 in Et2O yielded the heteroleptic beta-diketiminatotin(II) halides Sn(L1)Cl (3a), Sn(L1)Br (3b) or Sn(L2)Cl (4), even when an excess of the alkali metal beta-diketiminate was used [L1={N(R)C(Ph)}2CH, L2={N(R)C(Ph)CHC(But)N(R)}, R = SiMe3]. From and half an equivalent each of SnCl2.2H2O and SnCl2, or one equivalent of SnCl2.2H2O, the product was Sn(L3)Cl (5) or Sn(L4)Cl (6), in which one or both of the N-R bonds of L1 had been hydrolytically cleaved; the compound Sn(L5)Cl (7) was similarly obtained from and an equivalent portion of SnCl2.2H2O [L3={N(R)C(Ph)CHC(But)N(H)}, L4={N(H)C(Ph)CHC(But)N(H)} and L5={N(H)C(Ph)}2CH]. The halide exchange between 3a and 3b, studied by two-dimensional (119)Sn{1H}-NMR spectroscopy, is attributed to implicate a (mu-Cl)(mu-Br)-dimeric intermediate or transition state. The 13C{1H}-NMR spectra of or showed two distinct resonances for each group, which coalesced on heating, corresponding to DeltaG(338 K)= 69.4 (3a) or 72.8 (3b) kJ mol(-1). The chloride ligand of was readily displaced by treatment with NaNR2, CF3SO3H or CH2(COPh)2, yielding Sn(L1)X [X = NR2 (8), O3SCF3 (9) or {OC(Ph)}2CH (10)]. Oxidative addition of sulfur or selenium to gave the tin(IV) terminal chalcogenides Sn(E)(L1)(NR2)[E = S (11) or Se (12)]. The X-ray structures of the cocrystal of 3a/3b and of the crystalline compounds 5, 6, 8, 11 and are presented, as well as multinuclear NMR spectra of each of the new compounds.