Extending the coordination chemistry of molecular P(4)S(3): the polymeric Ag(P(4)S(3))(+) and Ag(P(4)S(3))(2)(+) cations

Upon reacting P(4)S(3) with AgAl(hfip)(4) and AgAl(pftb)(4) [hfip = OC(H)(CF(3))(2); pftb = OC(CF(3))(3)], the compounds Ag(P(4)S(3))Al(hfip)(4) 1 and Ag(P(4)S(3))(2)(+)[Al(pftb)(4)](-) 2 formed in CS(2) (1) or CS(2)/CH(2)Cl(2) (2) solution. Compounds 1 and 2 were characterized by single-crystal X-ray structure determinations, Raman and solution NMR spectroscopy, and elemental analyses. One-dimensional chains of [Ag(P(4)S(3))(x)](infinity) (x = 1, 1; x = 2, 2) formed in the solid state with P(4)S(3) ligands that bridge through a 1,3-P,S, a 2,4-P,S, or a 3,4-P,P eta(1) coordination to the silver ions. Compound 2 with the least basic anion contains the first homoleptic metal(P(4)S(3)) complex. Compounds 1 and 2 also include the long sought sulfur coordination of P(4)S(3). Raman spectra of 1 and 2 were assigned on the basis of DFT calculations of related species. The influence of the silver coordination on the geometry of the P(4)S(3) cage is discussed, additionally aided by DFT calculations. Consequences for the frequently observed degradation of the cage are suggested. An experimental silver ion affinity scale based on the solid-state structures of several weak Lewis acid base adducts of type (L)AgAl(hfip)(4) is given. The affinity of the ligand L to the silver ion increases according to P(4) < CH(2)Cl(2) < P(4)S(3) < S(8) < 1,2-C(2)H(4)Cl(2) < toluene.     

PAs3S3 cage as a new building block in copper halide coordination polymers

First examples of the coordination chemistry of the PAs(3)S(3) cage were obtained from solutions of PAs(3)S(3)·W(CO)(5) (1) in CH(2)Cl(2) or CH(2)Cl(2)/toluene and CuX (X = Cl, Br, I) in MeCN through interdiffusion techniques. Crystals of [Cu(PAs(3)S(3))(4)]X (2, X = Cl; 3, X = Br) and [(Cu(2)I)(PAs(3)S(3))(3)]I (4) were obtained and characterized by Raman spectroscopy (2) and single-crystal X-ray crystallography. The solid-state structures reveal an unexpected coordination versatility of the PAs(3)S(3) ligand: apical phosphorus and bridging sulfur atoms interact with copper, while As···X interactions determine the dimensionality of the frameworks. The structures of 2 and 3 contain tetrahedral [(PAs(3)S(3))(4)Cu](+) cations as secondary building units (SBUs), which are arranged by interactions with Cl(-) or Br(-) anions into two- and three-dimensional substructures. These interpenetrate into a (2D + 3D) polycatenane. Compound 4 is built up by a one-dimensional [(Cu(2)I)(PAs(3)S(3))(3)](n)(n+) ribbon with PAs(3)S(3) cages as P,S-linkers. The As atoms of the exo PAs(3)S(4) linkers interact with iodide counterions (3.35 < d(As-I) < 3.59 ?). The resulting two-dimensional layer is organized by weak As···I interactions (d(As-I = 3.87 ?) into a 3D network.     

(CuI)3P4S4: preparation,structural, and NMR spectroscopic characterization of a copper(I) halide adduct with beta-P4S4

(CuI)(3)P(4)S(4) is obtained by reaction of stoichiometric amounts of CuI, P, and S in evacuated silica ampoules. The yellow compound consists of monomeric beta-P(4)S(4) cage molecules that are separated by hexagonal columns of CuI. (CuI)(3)P(4)S(4) crystallizes isotypic to (CuI)(3)P(4)Se(4) in the hexagonal system, space group P6(3)cm (no. 185) with a=19.082(3), c=6.691(1) A, V=2109.9(6) A(3), and Z=6. Three of the four phosphorus atoms are bonded to copper, whereas no bonds between copper and sulfur are observed. The two crystallographically distinct copper sites are clearly differentiated by (65)Cu magic-angle spinning (MAS) NMR spectroscopy. Furthermore, an unequivocal assignment of the (31)P MAS-NMR spectra is possible on the basis of homo- and heteronuclear dipole-dipole and scalar interactions. Dipolar coupling to the adjacent quadrupolar spins (63, 65)Cu generates a clear multiplet structure of the peaks attributable to P1 and P2, respectively. Furthermore, the utility of a newly developed two-dimensional NMR technique is illustrated to reveal direct connectivity between P atoms based on ((31)P-(31)P) scalar interactions.     

Unprecedented eta(1)-P(basal) coordination of P(4)X(3) molecules (X = S, Se). An experimental and theoretical study of the apical vs basal complexation dichotomy

Reaction of [(triphos)Re(CO)(2)(OTf)] (1) [triphos = MeC(CH(2)PPh(2))(3); OTf = OSO(2)CF(3)] with P(4)S(3) and P(4)Se(3) yields pairs of coordination isomers, namely, [(triphos)Re(CO)(2)[eta(1)-P(apical)-P(4)X(3)]](+) (X = S, 2; Se, 5) and [(triphos)Re(CO)(2)[eta(1)-P(basal)-P(4)X(3)]](+) (X = S, 3; Se, 6). The latter represent the first examples of the eta(1)-P(basal) coordination achieved by the P(4)X(3) molecular cage. Further reaction of 2/3 and 5/6 mixtures with 1 affords the dinuclear species [[(triphos)Re(CO)(2)](2)[mu,eta(1:1)-P(apical,)P(basal)-P(4)X(3)]](2+) (X = S, 4; Se, 7) in which the unprecedented M-eta(1)-P(basal)/eta(1)-P(apical)-M' bridging coordination of the P(4)X(3) molecule is accomplished. A theoretical analysis of the bonding properties of the two coordination isomers is also presented. The directionality of apical vs basal phosphorus lone pairs is also discussed in terms of MO arguments.     

Dehydration reaction of hydroxyl substituted alkenes and alkynes on the Ru(2)S(2) complex

A variety of inter- and intramolecular dehydration was found in the reactions of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1) with hydroxyl substituted alkenes and alkynes. Treatment of 1 with allyl alcohol gave a C(3)S(2) five-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CH(OCH(2)CH=CH(2))S]](CF(3)SO(3))(4) (2), via C-S bond formation after C-H bond activation and intermolecular dehydration. On the other hand, intramolecular dehydration was observed in the reaction of 1 with 3-buten-1-ol giving a C(4)S(2) six-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2) [mu-SCH(2)CH=CHCH(2)S]](CF(3)SO(3))(4) (3). Complex 1 reacts with 2-propyn-1-ol or 2-butyn-1-ol to give homocoupling products, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCR=CHCH(OCH(2)C triple bond CR)S]](CF(3)SO(3))(4) (4: R = H, 5: R = CH(3)), via intermolecular dehydration. In the reaction with 2-propyn-1-ol, the intermediate complex having a hydroxyl group, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OH)S]](CF(3)SO(3))(4) (6), was isolated, which further reacted with 2-propyn-1-ol and 2-butyn-1-ol to give 4 and a cross-coupling product, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OCH(2)C triple bond CCH(3))S]](CF(3)SO(3))(4) (7), respectively. The reaction of 1 with diols, (HO)CHRC triple bond CCHR(OH), gave furyl complexes, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SSC=CROCR=CH]](CF(3)SO(3))(3) (8: R = H, 9: R = CH(3)) via intramolecular elimination of a H(2)O molecule and a H(+). Even though (HO)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OH) does not have any propargylic C-H bond, it also reacts with 1 to give [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)C(=CH(2))C(=C=C(CH(3))(2))]S](CF(3)SO(3))(4) (10). In addition, the reaction of 1 with (CH(3)O)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OCH(3)) gives [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(2)][mu-S=C(C(CH(3))(2)OCH(3))C=CC(CH(3))CH(2)S][Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)]](CF(3)SO(3))(4) (11), in which one molecule of CH(3)OH is eliminated, and the S-S bond is cleaved.     

Liquid-liquid distribution of ion-associates of dichlorocuprate(I) with quaternary ammonium counter-ions

The dichlorocuprate(I) anion CuCl(-)(2) can be extracted as its ion-associates Q(+).CuCl(-)(2) with quaternary ammonium cations (Q(+)) into chloroform. The extraction constants K(ex) have been determined, and the log K(ex) values found for the various counter-ions used are 1.93 for (C(3)H(7))(4)N(+), 4.10 for (C(4)H(9))(4)N(+), 6.57 for (C(5)H(11))(4)N(+), 1.57 for C(8)H(17)N(+) (CH(3))(3), 2.83 for C(10)H(21)N(+) (CH(3))(3) 4.12 for C(12)H(25)N(+) (CH(3))(3) and 5.21 for C(14)H(29)N(+)(CH(3))(3), respectively. A linear relationship was found between log K(ex) and the total number of carbon atoms in Q(+); from the slope of the line, the contribution of a methylene group to log K(ex) was calculated to be 0.59. The extractability with alkyltrimethylammonium cations was larger than that with symmetrical tetra-alkylammonium cations and the difference in log K(ex) for two cations (one of each type) with the same number of carbon atoms was about 0.4. From the extraction constants obtained, the extractability of CuCl(-)(2) was found to lie between that of ReO(-)(4) and ClO(-)(4).     

Suppression of realgar cage degradation during complexation: formation of hybrid coordination polymers with As4S4, PAs3S3, and Cu(I) halide building blocks

Realgar, As(4)S(4), reacts with Cr(CO)(5)THF under cage degradation to give As(4)S(3)·Cr(CO)(5) (1). The reverse structural change is found if solutions of 1 in CH(2)Cl(2) react with equimolar amounts of PAs(3)S(3)·W(CO)(5) and CuX (X = Cl, Br, I) in CH(3)CN under biphasic diffusion conditions. The resulting coordination polymers 2-4 contain a reconstituted realgar molecule along with the PAs(3)S(3) cage. The crystal structures of (CuX)(As(4)S(4))(PAs(3)S(3)) (X = Cl: 2; Br: 3) are characterized by one-dimensional (1D) (CuX)(As(4)S(4)) strands, which are formed by alternating As(4)S(4) cages and CuX dumbbells. Terminal PAs(3)S(3) molecules are coordinated to copper by apical phosphorus and bridging realgar through sulfur. The As(3) triangles of the resulting (CuX)(As(4)S(4))(PAs(3)S(3)) strands interact with halides of neighbored strands to give a folded three-dimensional (3D) network. The structure of (CuI)(3)(As(4)S(4))(PAs(3)S(3)) (4) contains 1D (Cu(3)I(3))(n) strands as backbones, which are bridged by sulfur atoms of two η(1:2)-As(4)S(4) molecules while PAs(3)S(3) confines the resulting sheet. The As(3) triangles at the surface of the layers interact with iodide of the next layer to form a layered 3D network.     

Reactivity of bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin with CO(2), OCS, and CS(2) and comparison to that of bis[bis(trimethylsilyl)amido]tin

The heterocumulenes carbon dioxide (CO(2)), carbonyl sulfide (OCS), and carbon disulfide (CS(2)) were treated with bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin {[(CH(2))Me(2)Si](2)N}(2)Sn, an analogue of the well-studied bis[bis(trimethylsilyl)amido]tin species [(Me(3)Si)(2)N](2)Sn, to yield an unexpectedly diverse product slate. Reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CO(2) resulted in the formation of 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane, along with Sn(4)(μ(4)-O){μ(2)-O(2)CN[SiMe(2)(CH(2))(2)]}(4)(μ(2)-N═C═O)(2) as the primary organometallic Sn-containing product. The reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CS(2) led to formal reduction of CS(2) to [CS(2)](2-), yielding [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn, in which the [CS(2)](2-) is coordinated through C and S to two tin centers. The product [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn also contains a novel 4-membered Sn-Sn-C-S ring, and exhibits a further bonding interaction through sulfur to a third Sn atom. Reaction of OCS with {[(CH(2))Me(2)Si](2)N}(2)Sn resulted in an insoluble polymeric material. In a comparison reaction, [(Me(3)Si)(2)N](2)Sn was treated with OCS to yield Sn(4)(μ(4)-O)(μ(2)-OSiMe(3))(5)(η(1)-N═C═S). A combination of NMR and IR spectroscopy, mass spectrometry, and single crystal X-ray diffraction were used to characterize the products of each reaction. The oxygen atoms in the final products come from the facile cleavage of either CO(2) or OCS, depending on the reacting carbon dichalogenide.     

Structures, electronic properties and solid state luminescence of Cu(I) iodide complexes with 2,9-dimethyl-1,10-phenanthroline and aliphatic aminomethylphosphines or triphenylphosphine

The luminescent complexes of triphenylphosphine and two interesting aminomethylphosphines: P(CH(2)N(CH(2)CH(2))(2)NCH(3))(3) and P(CH(2)N(CH(2)CH(2))(2)O)(3) with copper(I) iodide and 2,9-dimethyl-1,10-phenanthroline (dmp): [CuI(dmp)PPh(3)], [CuI(dmp)P(CH(2)N(CH(2)CH(2))(2)NCH(3))(3)] and [CuI(phen)P(CH(2)N(CH(2)CH(2))(2)O)(3)] are presented in this work. These complexes were characterized in solution by means of NMR spectroscopy and their structures were crystallographically determined in the solid state. All complexes crystallize as the discrete dimers bound by π-stacking interactions between dmp rings. The coordination geometry about the Cu(I) centre is pseudo-tetrahedral showing small flattening and large rocking distortions. The investigated compounds exhibit intense orange photoluminescence in the solid state (emission peaks at r.t.: λ(max) = 588-592 nm; τ = 1.7-2.2 and 6.4-10.0 μs; at 77 K: λ(max) = 605-612 nm; τ = 4.8-6.5 and 32-47 μs), which is several orders higher than the luminescence of the analogous complexes with 1,10-phenanthroline (phen). Electronic and structural properties of the [CuI(dmp/phen)PR(3)] complexes were characterized using DFT methods to interpret their photophysics. On the basis of TDDFT calculations the broad CT bands observed in UV-Vis spectra are interpreted as the two mixed transitions from σ(CuI) bond with a small admixture of σ(CuP) bond to π* phen or dmp ligand: (MX,MPR(3))LCT, while the emissions most probably occur from two triplet states which are in thermal equilibrium.     

Mercurophilic interaction in novel polynuclear Hg(II)-2-aminoethanethiolates

The reaction of 2-aminoethanethiol hydrochloride with Hg(2)Cl(2) in water yielded elemental mercury and one-dimensional polynuclear compounds [{Hg(3)Cl(5)(SCH(2)CH(2)NH(3))(3)}Cl](n) and [HgCl(SCH(2)CH(2)NH(2))(H(2)O)(2)](n) (2). The coordination environment around Hg in 1 and 2 is quite variable despite similar reaction conditions. The formation of a five-membered S/N chelate in 2 can be attributed to the use of base to produce a neutral ligand. Three independent types of Hg atoms, both three- and four-coordinate are observed in 1, whereas in 2, the Hg atom is tetracoordinate with S, N and Cl atoms in the primary coordination sphere. Despite distinct structural chemistry, the coordination environments in 1 and 2 are fairly similar with repeating units connected with bridged thiolate S atoms in addition to a terminal Cl attached to Hg. Intermolecular hydrogen-bonding involving amine protons, Cl and water molecules are responsible for a three-dimensional network in both 1 and 2. A short Hg...Hg distance of 3.564 A, indicates the presence of a mercurophilic interaction in 1. The compounds have been characterized by (1)H and (13)C NMR, UV-Vis, FT-IR, Raman, mass spectrometry, TGA and single X-ray crystallography.     

Electrical conductivity and luminescence in coordination polymers based on copper(I)-halides and sulfur-pyrimidine ligands

The solvothermal reactions between pyrimidinedisulfide (pym(2)S(2)) and CuI or CuBr(2) in CH(2)Cl(2):CH(3)CN lead to the formation of [Cu(11)I(7)(pymS)(4)](n) (pymSH = pyrimidine-2(1H)-thione) (1) and the dimer [Cu(II)(μ-Br)(Br)L](2) (L = 2-(pyrimidin-2-ylamino)-1,3-thiazole-4-carbaldehyde) (2). In the later reaction, there is an in situ S-S, S-C(sp(2)), and C(sp(2))-N multiple bond cleavage of the pyrimidinedisulfide resulting in the formation of 2-(pyrimidin-2-ylamino)-1,3-thiazole-4-carbaldehyde. Interestingly, similar reactions carried out just with a change in the solvent (H(2)O:CH(3)CN instead of CH(2)Cl(2):CH(3)CN) give rise to the formation of coordination polymers with rather different architectures. Thus, the reaction between pym(2)S(2) and CuI leads to the formation of [Cu(3)I(pymS)(2)](n) (3) and [CuI(pym(2)S(3))] (pym(2)S(3) = pyrimidiltrisulfide) (4), while [Cu(3)Br(pymS)(2)](n) (5) is isolated in the reaction with CuBr(2). Finally, the solvothermal reactions between CuI and pyrimidine-2-thione (pymSH) in CH(2)Cl(2):CH(3)CN at different ratios, 1:1 or 2:1, give the polymers [Cu(2)I(2)(pymSH)(2)](n) (6) and [Cu(2)I(2)(pymSH)](n) (7), respectively. The structure of the new compounds has been determined by X-ray diffraction. The studies of the physical properties of the novel coordination polymers reveal that compounds 3 and 5 present excellent electrical conductivity values at room temperature, while compounds 1, 3, and 5-7 show luminescent strong red emission at room temperature.     

Reaction of Sulfur with Ga-C Bonds: Synthesis and Characterization of [PyRGaS](3) Formed from Ga(S(2)R)(3) (R = Et, Me)

The reactions of Ga(CH(2)CH(3))(3) with variable amounts of elemental sulfur, S(8), in toluene or benzene at different temperatures result in the insertion of sulfur into the Ga-C bonds to form the compounds Ga[(S-S)CH(2)CH(3)](3) (I) and Ga[(S-S-S)CH(2)CH(3)](3) (II). Compound I was isolated from the reaction at low temperature while at room temperature; compound II was the major product. Compound II exhibited the maximum extent of sulfur insertion even when the reactions were carried out with more than 9.0 equiv of sulfur. The reactions of Ga(CH(3))(3) with various amounts of sulfur in toluene or benzene only result in the formation of compound III, Ga[(S-S)CH(3)](3). In pyridine at -30 degrees C, deinsertion of the sulfur atoms from Ga-S-S-C bonds was observed for the first time from compounds I and III resulting in formation of the six-membered Ga-S ring compounds IV, [PyEtGaS](3), and V, [PyMeGaS](3), respectively. Compounds IV and V were characterized by (1)H NMR, (13)C NMR, elemental analyses, thermogravimetric analysis, and single-crystal X-ray diffraction. Compound IV crystallized in the monoclinic space group P2(1)/n, with a = 9.288(2) ?, b = 14.966(2) ?, c = 19.588(3) ?, beta = 90.690(10) degrees, and Z = 4. Compound V crystallized in the monoclinic space group P2(1)/c, with a = 10.385(1) ?, b = 15.300(2) ?, c = 15.949(2) ?, beta = 107.01(1) degrees, Z = 4, unit cell volume = 2423.5(5) ?(3), R = 0.030, and R(w) = 0.026. The sulfur insertion reaction pathway was investigated by time-dependent and variable-temperature (1)H NMR spectroscopy.     

Structural and magnetic properties of iron(II) complexes with 1,4,5,8,9,12-hexaazatriphenylene (HAT)

Reactions of Fe(II) salts with the ligand 1,4,5,8,9,12-hexaazatriphenylene (HAT) led to the isolation and characterization of four new compounds: [Fe3(HAT)(H2O)12](SO4)3.3.3H2O (1), [Fe2(HAT)(SO4)(H2O)5](SO4).2H2O.CH3OH (2), [Fe2(HAT)(SO4)(H2O)5](SO4).3H2O (3), and [Fe3Cl5(HAT)(CH3OH)4(H2O)]Cl (4). Compound 1 crystallizes as a trinuclear cluster in which HAT acts as a tris-chelating ligand. Compounds 2 and 3 are two polymorphs of an infinite one-dimensional structure in which the Fe atoms are coordinated to HAT and then connected into the chain through bridging sulfate anions. Compound 4 exhibits a similar chain structure, but with bridging chloride ligands. The magnetic behavior of the new compounds is indicative of weak antiferromagnetic coupling between the Fe(II) centers through the HAT ligand.     

Three- and four-coordinate gold(I) complexes of 3,6-bis(diphenylphosphino)pyridazine: monomers,polymers, and a metallocryptand cage

The slightly yellow polymeric complexes [Au(2)Cl(2)(P(2)pz)(3)](n), 1 x 6CHCl(3), (P(2)pz is 3,6-bis(diphenylphosphino)pyridazine) and [[Au(2)(P(2)pz)(3)](PF(6))(2)](n), 2, are prepared by the stoichiometric reaction of AuCl(tht) (tht is tetrahydrothiophene) and P(2)pz in either dichloromethane or dichloromethane/methanol, respectively. Addition of 2 equiv of AuCl(tht) to a dichloromethane solution of 1 equiv of P(2)pz generates the simple (AuCl)(2)(P(2)pz) compound, 3. Compound 3 contains nearly linear P-Au-Cl units with intermolecular Au.Au separations of 3.570 A. Au(2)I(2)(P(2)pz)(3), 4, is prepared by reacting excess NaI with 2 in a dichloromethane/methanol mixture. Characterization of 1, 2, and 4 by X-ray crystallography confirms the 2:3 gold/ligand ratio of all three complexes. The coordination polymer 1 maintains a high degree of solvation in the solid-state with three chloroform adducts hydrogen-bonded to the chloride ligand on each gold atom. These chloroform molecules are sandwiched between the two-dimensional polymeric sheets of 1. The crystal structure of 4 reveals an empty, iodide-capped metallocryptand cage with the tetrahedrally distorted gold atoms and the nitrogen atoms on the pyridazine rings directed away from the center of the cavity. No metal ion encapsulation was observed for complex 4. Complex 2 forms one-dimensional arrays of [Au(2)(P(2)pz)(2)](2+) metallomacrocycles connected to each other by a third P(2)pz ligand. The electronic absorption spectra (CH(2)Cl(2)) of 1-4 show broad, nearly featureless absorption bands that tail into the visible with pi-pi bands at 296 nm and discernible shoulders at 314 nm for 2 and 334 nm for 3. Excitation into the low energy band of 2 produces only a modest emission in solution at 540 nm (lambda(ex) 468 nm) and 493 nm (lambda(ex) 403 nm). Under identical conditions, the P(2)pz ligand also emits at 540 and 493 nm.     

Construction of a novel copper(I) chain polymer of hexanuclear Cu6(2-SC5H4NH)6I6 cores with a new (mu 3-S) mode of bonding of pyridine-2-thione and of an unusual triangular Cu3I3(dppe)3(2-SC5H4NH) cluster

The reactions of copper(I) iodide with pyridine-2-thione (2-SC(5)H(4)NH) in the presence of a series of diphosphane ligands, Ph(2)P[bond]X[bond]Ph(2)P [X = [bond](CH(2))(m)[bond], m = 1(dppm), 2 (dppe), 3 (dppp), 4 (dppb); [bond]CH[double bond]CH[bond] (dppen)], yielded an iodo-bridged hexanuclear Cu(I) linear polymer, [Cu(6)(mu(3)-SC(5)H(4)NH)(4)(mu(2)-SC(5)H(4)NH)(2)(I(4))(mu-I)(2)-](n).2nCH(3)CN (1). A similar reaction with 1,2-bis(diphenylphosphino)ethane (dppe) and 2-SC(5)H(4)NH yielded a triangular cluster, Cu(3)I(3)(dppe)(3)(2-SC(5)H(4)NH), 2. In the chain polymer 1, three Cu(I) iodide and three 2-SC(5)H(4)NH ligands combined via bridging S donor atoms to form a boat-shaped trinuclear Cu(3)S(3)I(3) core, and two such cores combined in an inverse manner via four S-donor atoms (mu(3)-S) to form a centrosymmetric hexanuclear repeat unit, Cu(6)S(6)I(4)(mu-I)(2-), which finally formed the iodo-bridged infinite linear chain polymer 1. Linear chains are separated by the nonbonded acetonitrile molecules. Polymer 1 is the first such example of a linear chain formed by the hexanuclear Cu(6)S(6)I(6) core in copper chemistry as well as in metal-heterocyclic thioamide chemistry. In addition, it has the first mu(3)-S mode of neutral pyridine-2-thione ever reported. In the moiety Cu(3)I(3)(dppe)(3) of 2, two copper(I) centers are bridged by the iodide ligands forming a Cu(mu-I)(2)Cu core, while a third copper(I) center is terminally bonded to another iodide ligand. Polymer 2 is also rare, and the first triangular cluster of Cu(I) with an heterocyclic thioamide.     

Manganese(II)-carboxylate-pseudohalide systems derived from 1,4-bis(4-carboxylatopyridinium-1-methylene)benzene: structures and magnetism

The reactions of manganese(II) acetate or perchlorate, sodium azide or sodium cyanate, and the zwitterionic dicarboxylate ligand 1,4-bis(4-carboxylatopyridinium-1-methylene)benzene (L) under different conditions yielded three different Mn(II) coordination polymers with mixed carboxylate and azide (or cyanate) bridges: {[Mn (L(1))(0.5)(N(3))(OAc)]·3H(2)O}(n) (1), {[Mn(4)(L(1))(N(3))(8)(H(2)O)(4)(CH(3)OH)(2)]·[L(1)]}(n) (2), and {[Mn(3)(L(1))(NCO)(6)(H(2)O)(4)]·[L(1)]·[H(2)O](2)}(n) (3). The compounds exhibit diverse structures and magnetic properties. In 1, the 1D uniform anionic [Mn(N(3))(COO)(2)](n) chains with the (μ-EO-N(3))(μ-COO)(2) triple bridges (EO = end-on) are interlinked by the dipyridinium L ligands into highly undulated 2D layers. Magnetic studies on 1 reveal that the mixed triple bridges induce antiferromagnetic coupling between Mn(II) ions. Compounds 2 and 3 consist of 1D neutral polymeric chains and co-crystallized zwitterions, and the chains are formed by the L ligands interlinking linear polynuclear units. The polynuclear unit in 2 is tetranuclear with (μ-EO-N(3))(2) as central bridges and (μ-EO-N(3))(2)(μ-COO) as peripheral bridges, while that in 3 is trinuclear with (μ-NCO)(2)(μ-COO) bridges. Magnetic studies demonstrate that the magnetic coupling through the mixed azide/isocyanate and carboxylate bridges in 2 and 3 is antiferromagnetic. An expression of magnetic susceptibility based on a 2-J model for linear tetranuclear systems of classical spins has been deduced and applied to 2.     

Bis(phosphino)borates: a new family of monoanionic chelating phosphine ligands

The reaction of dimethyldiaryltin reagents Me(2)SnR(2) (R = Ph (1), p-MePh (2), m,m-Me(2)Ph (3), p-(t)BuPh (4), p-MeOPh (5), p-CF(3)Ph (6)) with BCl(3) provided a high-yielding, simple preparative route to the corresponding diarylchloroboranes R(2)BCl (R = Ph (10), p-MePh (11), m,m-Me(2)Ph (12), p-(t)BuPh (13), p-MeOPh (14), p-CF(3)Ph (15)). In some cases, the desired diarylchloroborane was not formed from an appropriate tin reagent Me(2)SnR(2) (R = o-MeOPh (7), o,o-(MeO)(2)Ph (8), o-CF(3)Ph (9)). The reaction of lithiated methyldiaryl- or methyldialkylphosphines with diarylchloroboranes or dialkylchloroboranes is discussed. Specifically, several new monoanionic bis(phosphino)borates are detailed: [Ph(2)B(CH(2)PPh(2))(2)] (25); [(p-MePh)(2)B(CH(2)PPh(2))(2)] (26); [(p-(t)BuPh)(2)B(CH(2)PPh(2))(2)] (27); [(p-MeOPh)(2)B(CH(2)PPh(2))(2)] (28); [(p-CF(3)Ph)(2)B(CH(2)PPh(2))(2)] (29); [Cy(2)B(CH(2)PPh(2))(2)] (30); [Ph(2)B(CH(2)P[p-(t)BuPh](2))(2)] (31); [(p-MeOPh)(2)B(CH(2)P[p-(t)BuPh](2))(2)] (32); [Ph(2)B(CH(2)P[p-CF(3)Ph](2))(2)] (33); [Ph(2)B(CH(2)P(BH(3))(Me)(2))(2)] (34); [Ph(2)B(CH(2)P(S)(Me)(2))(2)] (35); [Ph(2)B(CH(2)P(i)Pr(2))(2)] (36); [Ph(2)B(CH(2)P(t)Bu(2))(2)] (37); [(m,m-Me(2)Ph)(2)B(CH(2)P(t)Bu(2))(2)] (38). The chelation of diarylphosphine derivatives 25-33 and 36 to platinum was examined by generation of a series of platinum dimethyl complexes. The electronic effects of substituted bis(phosphino)borates on the carbonyl stretching frequency of neutral platinum alkyl carbonyl complexes were studied by infrared spectroscopy. Substituents remote from the metal center (i.e. on boron) have minimal effect on the electronic nature of the metal center, whereas substitution close to the metal center (on phosphorus) has a greater effect on the electronic nature of the metal center.     

Hydrothermal synthesis and magnetic properties of novel Mn(II) and Zn(II) materials with thiolato-carboxylate donor ligand frameworks

The hydrothermal reaction of thiosalicylic acid, (C(6)H(4)(CO(2)H)(SH)-1,2) with manganese(III) acetate leads to formation of the coordination solid [Mn(5)((C(6)H(4)(CO(2))(S)-1,2)(2))(4)(mu3-OH)2] (1) via a redox reaction, where resulting manganese(II) centres are coordinated by oxygen donor atoms and S-S disulfide bridge formation is simultaneously observed. Reaction of the same ligand under similar conditions with zinc(II) chloride yields the layered coordination solid [Zn(C(6)H(4)(CO(2))(S)-1,2)] (2). Hydrothermal treatment of manganese(III) acetate with 2-mercaptonicotinic acid, (NC(5)H(3)(SH)(CO(2)H)-2,3) was found to produce the 1-dimensional chain structure [Mn(2)((NC(5)H(3)(S)(CO(2))-2,3)(2))(2)(OH(2))(4)].4H(2)O (3) which also exhibits disulfide bridge formation and oxygen-only metal interactions. Compound 3 has been studied by thermogravimetric analysis and indicates sequential loss of lattice and coordinated water, prior to more comprehensive ligand fragmentation at elevated temperatures. The magnetic behaviour of 1 and 3 has been investigated and both exhibit antiferromagnetic interactions. The magnetic behaviour of 1 has been modelled as two corner-sharing isosceles triangles whilst 3 has been modelled as a 1-dimensional chain.     

Dinuclear and Tetranuclear Cages of Oxodiphenylantimony Phosphinates: Synthesis and Structures

The novel dimeric compounds [Ph(2)Sb(O(2)PR(2))O](2).2CH(2)Cl(2) [R = cycl-C(6)H(11) (2) and cycl-C(8)H(15) (3)] have been synthesized by reacting diphenylantimony trichloride (1) with 3 mol equiv of silver acetate followed by 1 mol equiv of the phosphinic acid. By the same route under more stringent conditions to exclude moisture, the mixed phosphinate-acetate [Ph(2)Sb(O(2)P(C(6)H(11))(2))(O(2)CMe)](2)O (4) was isolated and characterized. Treatment of 2 with acetic acid/water affords the tetranuclear cage Ph(8)Sb(4)O(4)(OH)(2)(O(2)P(C(6)H(11))(2))(2).CH(3)COOH.CH(2)Cl(2) (5); it is possible to convert 5 to 2 by heating it with an excess of the phosphinic acid. Compounds 2, 3, and 5 have been characterized by X-ray structural analysis. All of them possess four membered Sb(2)O(2) rings with hexacoordinated antimony. In 5 the antimony atoms in the two Sb(2)O(2) rings are connected by oxo bridges on two sides to give an Sb(4)O(6) cage. These structures are correlated with those of known tin cages.     

Synthesis, crystal structure, and solid-state NMR spectroscopy of a new open-framework aluminophosphate (NH(4))(2)Al(4)(PO(4))(4)(HPO(4))xH(2)O

A new three-dimensional open-framework aluminophosphate (NH(4))(2)Al(4)(PO(4))(4)(HPO(4)).H(2)O (denoted AlPO-CJ19) with an Al/P ratio of 4/5 has been synthesized, using pyridine as the solvent and 2-aminopyridine as the structure-directing agent, under solvothermal conditions. The structure was determined by single-crystal X-ray diffraction and further characterized by solid-state NMR techniques. The alternation of the Al-centered polyhedra (including AlO(4), AlO(5), and AlO(6)) and the P-centered tetrahedra (including PO(4) and PO(3)OH) results in an interrupted open-framework structure with an eight-membered ring channel along the [100] direction. This is the first aluminophosphate containing three kinds of Al coordinations (AlO(4), AlO(5), and AlO(6)) with all oxygen vertexes connected to framework P atoms. (27)Al MAS NMR, (31)P MAS NMR, and (1)H --> (31)P CPMAS NMR characterizations show that the solid-state NMR techniques are an effective complement to XRD analysis for structure elucidation. Furthermore, all of the possible coordinations of Al and P in the aluminophosphates with an Al/P ratio of 4/5 are summarized. Crystal data: (NH(4))(2)Al(4)(PO(4))(4)(HPO(4))xH(2)O, monoclinic P2(1) (No. 4), a = 5.0568(3) A, b = 21.6211(18) A, c = 8.1724(4) A, beta = 91.361(4) degrees , V = 893.27(10) A(3), Z = 2, R(1) = 0.0456 (I > 2 sigma(I)), and wR(2) = 0.1051 (all data).