One-Dimensional Modeling of Turbulent Premixed Jet Flames - Comparison to DNS

The one-dimensional turbulence (ODT) model, formulated in an Eulerian reference frame, is applied to a temporally-evolving premixed turbulent hydrogen plane-jet flame and results are compared with direct numerical simulation (DNS) data. This is the first published study to perform direct comparisons of ODT to DNS for premixed flames. The ODT model solves the full set of conservation equations for mass, momentum, energy, and species on a one-dimensional domain corresponding to the transverse jet direction. The effects of turbulent mixing are modeled via a stochastic process, while the full range of diffusive-reactive length and time scales are resolved directly on the one-dimensional domain. A detailed chemical mechanism for hydrogen combustion consisting of 9 species and 21 reactions and a mixture-averaged transport model are used (consistent with the DNS). Cases with two different Damköhler numbers are considered and comparisons between the ODT and DNS data are shown with respect to flow dynamics and thermochemistry. The ODT compared favorably with the DNS in terms of the overall entrainment as judged by the streamwise velocity profile and in terms of local flamelet structure as judged by progress-variable conditional reaction and scalar dissipation rates. While the ODT agreed qualitatively with the overall flame evolution, the net fuel consumption rate was somewhat over-predicted for a brief early period and under-predicted later on, leading to an overly long flame burnout time. It was demonstrated that adjusting a parameter controlling the selection of large eddies improved the prediction of the peak fuel consumption rate and overall reaction progress but worsened the prediction of jet entrainment. An analysis of the 1D nature of ODT is presented that suggests the FSD in ODT needs to be much higher than the FSD in the DNS in order to achieve the same overall burning rate, suggesting that the FSD is under-predicted by a significant fraction. While the success of the ODT in reproducing many of the salient features of nonpremixed flames has been demonstrated, the current study suggests that improvements are needed when applied to premixed flames. It is also important to note that the DNS required approximately 40×10⁶ CPU hours while the ODT required approximately 10³ CPU hours.     

A Priori Evaluation of the Laminar Flamelet Decomposition Model for Turbulent Premixed Flames using DNS Data

Laminar flamelet decomposition (LFD) is a dynamic approach for modelling sub-filter scale turbulence-chemistry interactions in Large-Eddy Simulations using a stretched flamelet library. In this work, the performance of the LFD model – that was previously used only in non-premixed combustion—is investigated a priori for premixed combustion using positively-strained flamelets in the reactant-to-product configuration. For this purpose, a DNS database of methane-air premixed flames is utilized. The flames are propagating in a rectangular box under homogeneous isotropic turbulence conditions over a wide range of Karlovitz numbers. The results show that the LFD model can correctly account for the sub-filter scale turbulence-chemistry interactions to predict the filtered reaction rates and the filtered scalar field, provided that turbulent and laminar mixing are well predicted. The deviations from the DNS results are attributed to the shortcomings of the strained flamelet library and the non-flamelet effects. Finally, the LFD results are compared with a different sub-filter scale model using the same strained flamlelet library, and the relative performances of the two models are discussed.—

     

Statistically Steady Incompressible DNS to Validate a New Correlation for Turbulent Burning Velocity in Turbulent Premixed Combustion

Incompressible 3-D DNS is performed in non-decaying turbulence with single step chemistry to validate a new analytical expression for turbulent burning velocity. The proposed expression is given as a sum of laminar and turbulent contributions, the latter of which is given as a product of turbulent diffusivity in unburned gas and inverse scale of wrinkling at the leading edge. The bending behavior of U _T at higher u′ was successfully reproduced by the proposed expression. It is due to decrease in the inverse scale of wrinkling at the leading edge, which is related with an asymmetric profile of FSD with increasing u′. Good agreement is achieved between the analytical expression and the turbulent burning velocities from DNS throughout the wrinkled, corrugated and thin reaction zone regimes. Results show consistent behavior with most experimental correlations in literature including those by Bradley et al. (Philos Trans R Soc Lond A 338:359–387, 1992), Peters (J Fluid Mech 384:107–132, 1999) and Lipatnikov et al. (Progr Energ Combust Sci 28:1–74, 2002).     

Non-linear Response of Turbulent Premixed Flames to Imposed Inlet Velocity Oscillations of Two Frequencies

This paper describes an experimental study investigating the non-linear response of lean premixed air/ethylene flames to strong inlet velocity perturbations of two frequencies. The combustor has a centrally-placed bluff body and a short quartz section. The annulus between the bluff body and the flow tube, which also housed the acoustic pressure transducers, allowed the reactants into the combustor. The inlet flow was perturbed using loudspeakers. High speed laser tomography, OH* chemiluminescence and OH Planar Laser Induced Fluorescence (PLIF) have been used for flow visualization, heat release and flame surface density (FSD) measurements respectively. The heat release fluctuations increased initially linearly with inlet velocity amplitude for a single frequency forcing, with saturation occurring after forcing amplitudes of around 15% of the bulk velocity, which was found to occur due to vortex roll up and subsequent flame annihilation. The introduction of energy at the second frequency (i.e, the harmonic) was found to change the vortex formation and shedding frequency, depending on the level of forcing. This resulted in a non-linear flame response transfer function (defined as the amplitude of unsteady heat release divided by the amplitude of velocity perturbation at the fundamental) whose amplitude depended greatly on the amount of harmonic content present in the perturbations. The introduction of higher harmonics reduced the flame annihilation events, which are responsible for saturation, thus reducing non-linearity in the amplitude dependence of the flame response. These results were further verified using sequential time-resolved OH PLIF measurements. The findings from this study suggest that the acoustic response of the flame was mostly due to flame area variation effected by modulation of the annular jet and evolution of the shear layers.     

A Study of Strain Rate Effects for Turbulent Premixed Flames with Application to LES of a Gas Turbine Combustor Model

Large-scale strain rate field, a resolved quantity which is easily computable in large-eddy simulations (LES), could have profound effects on the premixed flame properties by altering the turbulent flame speed and inducing local extinction. The role of the resolved strain rate has been investigated in a posterior LES study of GE lean premixed dry low-NOx emissions LM6000 gas turbine combustor model. A novel approach which is based on the coupling of the linear-eddy model with a one-dimensional counterflow solver has been applied to obtain the parameterizations of the resolved premixed flame properties in terms of the reactive progress variable, the local strain rate measure, and local Reynolds and Karlovitz numbers. The strain rate effects have been analyzed by comparing LES statistics for several models of the turbulent flame speed, i.e, with and without accounting for the local strain rate effects, with available experimental data. The sensitivity of the simulation results to the inflow velocity conditions as well as the grid resolution have been also studied. Overall, the results obtained demonstrate that the effects of the resolved strain rate are not dominant for the considered premixed flame configuration and the unstrained turbulent flame speed model is found to perform as well as the one that allows for the strain rate effects.     

Dynamic Response of Swirl Stabilized Turbulent Premixed Flames Based on the Helmholtz-Hodge Velocity Decomposition

The dynamic response of fully premixed flames stabilized in strongly swirled flows undergoing vortex breakdown is investigated with axisymmetric unsteady RANS simulations. The analysis relies on the well known Helmholtz-Hodge decomposition of the velocity field into its irrotational and rotational components. A novel methodology based on the linearization of the progress variable transport equation is developed to determine the separate contribution of these velocity components to the Flame Transfer Function (FTF). Due to the phase delay between the convected tangential velocity and instantaneously propagating axial velocity perturbations, a non-monotonic frequency dependence of the swirl number amplitude downstream the swirl generator is detected. In line with experimental observations, such non-monotonic frequency dependence is found also for the amplitude and phase of the FTF. This behaviour is associated here with rotational velocity perturbations generated by the Central Recirculation Zone (CRZ) generated by the phenomenon of vortex breakdown which, responding in a fashion totally similar to the swirl number perturbation, produces flame surface area fluctuations with the same distribution versus frequency.     

Linear Eddy Mixing Model Studies of High Karlovitz Number Turbulent Premixed Flames

Turbulent premixed flames exhibit different structural and propagation characteristics with increasing upstream turbulence intensity starting from thin wrinkled flames in the Corrugated Flamelet regimes to a flame with a thicker preheat zone in the Thin Reaction Zone Regime (TRZ) and finally, becoming more disorganized or broken in the Distributed or Broken Reaction Zone (D/BRZ) regimes under intense turbulence. A single comprehensive predictive model that can span all regimes does not currently exist, and in this study we explore the ability of the stand-alone one-dimensional linear-eddy mixing (LEM) model to simulate the flames in all these regimes. Past applications of this 1DLEM model have demonstrated reasonable predictions in the flamelet and TRZ regimes and here, new experiments in the TRZ regime are specifically addressed to evaluate the predictive capability of this model. Additional simulations in the D/BRZ regimes (where no data is currently available) are performed to determine if the model can be extended to the high turbulence regime. Comparison with the data in the TRZ regime shows satisfactory agreement. Analysis suggests varying levels of preheat zone broadening in all the TRZ and D/BRZ cases. While the average heat release distribution for the TRZ cases is nearly identical to the laminar unstrained baseline, changes to the species and heat release distribution are observed only at a high Karlovitz Number K a > 10³. In the D/BRZ regime it is shown that the transition is related to enhanced turbulent diffusion that dominates molecular diffusion effects causing deviations from the laminar baseline.     

Transient Behavior of Turbulent Scalar Transport in Premixed Flames

Transition from gradient to countergradient scalar transport in a statistically planar, one-dimensional, developing, premixed turbulent flame is studied both theoretically and numerically. A simple criterion of the transition referred to is derived from the balance equation for the combustion progress variable, with the criterion highlighting an important role played by flame development. A balance equation for the difference in velocities $\bar{u}_b$ and $\bar{u}_u$ conditioned on burned and unburned mixture, respectively, is numerically integrated. Both analytical and computed results show that; (1) The flux $\overline{\rho u'' c''}$ is gradient during an early stage of flame development followed by transition to countergradient scalar transport at certain instant t _tr . (2) The transition time is increased when turbulence length scale L is increased or when the laminar flame speed S _L and/or the density ratio are decreased. (3) The transition time normalized using the turbulence time scale is increased by u??. Moreover, the numerical simulations have shown that the transition time is increased by u?? if a ratio of u??/S _L is not large. This dependence of t _tr on u?? is substantially affected by (i) the mean pressure gradient induced within the flame due to heat release and (ii) by the damping effect of combustion on the growth rate of mean flame brush thickness. The reasonable qualitative agreement between the computed trends and available experimental and DNS data, as well as the agreement between the computed trends and the present theoretical results, lends further support to the conditioned balance equation used in the present work.     

Large-eddy Simulation of Triangular-stabilized Lean Premixed Turbulent Flames: Quality and Error Assessment

In this numerical study, an algebraic flame surface wrinkling (AFSW) reaction submodel based on the progress variable approach is implemented in the large-eddy simulation (LES) context and validated against the triangular stabilized bluff body flame configuration measurements i.e. in VOLVO test rig. The quantitative predictability of the AFSW model is analyzed in comparison with another well validated turbulent flame speed closure (TFC) combustion model in order to help assess the behaviour of the present model and to further help improve the understanding of the flow and flame dynamics. Characterization of non-reacting (or cold) and reacting flows are performed using various subgrid scale models for consistent grid size variation with 300,000 (coarse), 1.2 million (intermediate) and 2.4 million (fine) grid cells. For non-reacting flows at inlet velocity of 17?m/s and inlet temperature 288?K, coarse grid leads to over prediction of turbulence quantities due to low dissipation at the early stage of flow development behind the bluff body that convects downstream eventually polluting the resulting solution. The simulated results with the intermediate (and fine) grid for mean flow and turbulence quantities, and the vortex shedding frequency (f_s) closely match experimental data. For combusting flows for lean propane/air mixtures at 35?m/s and 600?K, the vortex shedding frequency increase threefold compared with cold scenario. The predicted results of mean, rms velocities and reaction progress variable are generally in good agreement with experimental data. For the coarse grid the combustion predictions show a shorter recirculation region due to higher turbulent burning rate. Finally, both cold and reacting LES data are analyzed for uncertainty in the solution using two quality assessment techniques: two-grid estimator by Celik, and model and grid variation by Klein. For both approaches, the resolved turbulent kinetic energy is used to estimate the grid quality and error assessment. The quality assessment reveals that the cold flows are well resolved even on the intermediate mesh, while for the reacting flows even the fine mesh is locally not sufficient in the flamelet region. The Klein approach estimates that depending on the recirculation region in cold scenario both numerical and model errors rise near the bluff-body region, while in combusting flows these errors are significant behind the stabilizing point due to preheating of unburned mixture and reaction heat release. The total error mainly depends on the numerical error and the influence of model error is low for this configuration.     

Resolution Requirements in Stochastic Field Simulation of Turbulent Premixed Flames

The spatial resolution requirements of the Stochastic Fields probability density function approach are investigated in the context of turbulent premixed combustion simulation. The Stochastic Fields approach is an attractive way to implement a transported Probability Density Function modelling framework into Large Eddy Simulations of turbulent combustion. In premixed combustion LES, the numerical grid should resolve flame-like structures that arise from solution of the Stochastic Fields equation. Through analysis of Stochastic Fields simulations of a freely-propagating planar turbulent premixed flame, it is shown that the flame-like structures in the Stochastic Fields simulations can be orders of magnitude narrower than the LES filter length scale. The under-resolution is worst for low Karlovitz number combustion, where the thickness of the Stochastic Fields flame structures is on the order of the laminar flame thickness. The effect of resolution on LES predictions is then assessed by performing LES of a laboratory Bunsen flame and comparing the effect of refining the grid spacing and filter length scale independently. The usual practice of setting the LES filter length scale equal to grid spacing leads to severe under-resolution and numerical thickening of the flame, and to substantial error in the turbulent flame speed. The numerical resolution required for accurate solution of the Stochastic Fields equations is prohibitive for many practical applications involving high-pressure premixed combustion. This motivates development of a Thickened Stochastic Fields approach (Picciani et al. Flow Turbul. Combust. X, YYY (2018) in order to ensure the numerical accuracy of Stochastic Fields simulations.     

Subgrid Modeling of Turbulent Premixed Flames in the Flamelet Regime

Large eddy simulation (LES) models for flamelet combustion are analyzed by simulating premixed flames in turbulent stagnation zones. ALES approach based on subgrid implementation of the linear eddy model(LEM) is compared with a more conventional approach based on the estimation of the turbulent burning rate. The effects of subgrid turbulence are modeled within the subgrid domain in the LEM-LES approach and the advection (transport between LES cells) of scalars is modeled using a volume-of-fluid (VOF) Lagrangian front tracking scheme. The ability of the VOF scheme to track the flame as a thin front on the LES grid is demonstrated. The combined LEM-LES methodology is shown to be well suited for modeling premixed flamelet combustion. The geometric characteristics of the flame surfaces, their effects on resolved fluid motion and flame-turbulence interactions are well predicted by the LEM-LES approach. It is established here that local laminar propagation of the flamelets needs to be resolved in addition to the accurate estimation of the turbulent reaction rate. Some key differences between LEM-LES and the conventional approach(es) are also discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Study of a Filtered Flamelet Formulation for Large Eddy Simulation of Premixed Turbulent Flames

Despite significant advances in the understanding and modelling of turbulent combustion, no general model has been proposed for simulating flames in industrial combustion devices. Recently, the increase in computational possibilities has raised the hope of directly solving the large turbulent scales using large eddy simulation (LES) and capturing the important time-dependant phenomena. However, the chemical reactions involved in combustion occur at very small scales and the modelling of turbulent combustion processes is still required within the LES framework. In the present paper, a recently presented model for the LES of turbulent premixed flames is presented, analysed and discussed. The flamelet hypothesis is used to derive a filtered source term for the filtered progress variable equation. The model ensures proper flame propagation. The effect of subgrid scale (SGS) turbulence on the flame is modelled through the flame-wrinkling factor. The present modelling of the source term is successfully tested against filtered direct numerical simulation (DNS) data of a V-shape flame. Further, a premixed turbulent flame, stabilised behind an expansion, is simulated. The predictions agree well with the available experimental data, showing the capabilities of the model for performing accurate simulations of unsteady premixed flames.     

Effects of Body Forces on Turbulent Kinetic Energy Transport in Premixed Flames

Flow, Turbulence and Combustion - The effects of buoyancy on turbulent premixed flames are expected to be strong due to the large changes in density between the unburned and fully burned gases. The...     

A Priori Testing of Flamelet Generated Manifolds for Turbulent Partially Premixed Methane/Air Flames

To reduce high computational cost associated with simulations of reacting flows chemistry tabulation methods like the Flamelet Generated Manifold (FGM) method are commonly used. However, H₂, CO and OH predictions in RANS and LES simulations using the FGM (or a similar) method usually show a substantial deviation from measurements. The goal of this study is to assess the accuracy of low-dimensional FGM databases for the prediction of these species in turbulent, partially-premixed reacting flows. It will be examined to what extent turbulent, partially-premixed jet flames can be described by FGM databases based on premixed or counterflow diffusion flamelets and to what extent the chosen molecular transport model for the flamelet influences the accuracy of species mass fraction predictions in CFD-simulations. For LES and RANS applications a model that accounts for subgrid fluctuations has to be added introducing additional errors in numerical results. A priori analysis of FGM databases enables the exclusion of numerical errors (scheme accuracy, convergence) that occur in CFD simulations as well as the exclusion of errors originating from subgrid modeling assumptions in LES and RANS. Four different FGM databases are compared for H₂O, H₂, CO, CO₂ and OH predictions in Sandia Flames C to F. Species mass fractions will be compared to measurements directly and conditioned on mixture fraction. Special attention is paid to the representation of experimentally observed differential diffusion effects by FGM databases.     

Noise Correction and Length Scale Estimation for Scalar Dissipation Rate Measurements in Turbulent Partially Premixed Flames

A recently developed conditional sampling-based method for correcting noise effects in scalar dissipation rate measurements and for estimating the extent of resolution of the dissipation rate is employed to analyze the data obtained in turbulent partially premixed (Sandia) flames. The method uses conditional sampling to select instantaneous fully resolved local scalar fields, which are analyzed to determine the measurement noise and to correct the Favre mean, conditional, and conditionally filtered dissipation rates. The potentially under-resolved local scalar fields, also selected using conditional sampling, are corrected for noise and are analyzed to examine the extent of resolution. The error function is used as a model for the potentially under-resolved local scalar to evaluate the scalar dissipation length scales and the percentage of the dissipation resolved. The results show that the Favre mean dissipation rate, the mean dissipation rate conditional on the mixture fraction, and dissipation rate filtered conditionally on the mixture fraction generally are well resolved in the flames. Analyses of the dissipation rates filtered conditionally on the mixture fraction and temperature show that the length scale increases with temperature, due to lower dissipation rate and higher diffusivity. The dissipation rate is well resolved for temperatures above 1,300 K but is less resolved at lower temperatures, although the probability of very low temperature events is low. To fully resolve these rare events the sample spacing needs to be reduced by approximately one half. The present study further demonstrates the effectiveness of the new noise correction and length scale estimation method.     

Large Eddy Simulation of Stratified and Sheared Flames of a Premixed Turbulent Stratified Flame Burner Using a Flamelet Model with Heat Loss

This paper presents large eddy simulations (LES) of the Darmstadt turbulent stratified flame burner (TSF) at different operating conditions including detailed heat loss modeling. The target cases are a non-reacting and two reacting cases. Both reacting cases are characterized by stratification, while one flame additionally features shear. In the regime diagram for premixed combustion, the studied flames are found at the border separating the thin reaction zones regime and the broken reaction zones regime. A coupled level set/progress variable model is utilized to describe the combustion process. To account for heat loss, an enthalpy defect approach is adopted and reformulated to include differential diffusion effects. A novel power-law rescaling methodology is proposed to integrate the enthalpy defect approach into the level set/progress variable model which is extensively validated in two validation scenarios. It is demonstrated that the LES with the newly developed model captures the influence of heat loss well and that the incorporation of heat loss effects improves the predictions of the TSF-burner over adiabatic simulations, while reproducing the experimentally observed flame lift-off from the pilot nozzle.     

Relations Between Statistics of Three-Dimensional Flame Curvature and its Two-Dimensional Counterpart in Turbulent Premixed Flames

The relations between the actual flame curvature probability density function (PDF) evaluated in three-dimensions and its two-dimensional counterpart based on planar measurements have been analytically derived subject to the assumptions of isotropy and statistical independence of various angles and two-dimensional curvature. These relations have been assessed based on Direct Numerical Simulation (DNS) databases of turbulent premixed (a) statistically planar and (b) statistically axisymmetric Bunsen flames. It has been found that the analytically derived relation interlinking the PDFs of actual three-dimensional curvature and its two-dimensional counterpart holds reasonably well for a range of curvatures around the mean value defined by the inverse of the thermal flame thickness for different turbulence intensities across different combustion regimes. The flame surface is shown to exhibit predominantly two-dimensional cylindrical curvature but there is a significant probability of finding saddle type flame topologies and this probability increases with increasing turbulence intensity. The presence of saddle type flame topologies affects the ratios of second and third moments of two-dimensional and three-dimensional curvatures. It has been demonstrated that the ratios of second and third moments of two-dimensional and three-dimensional curvatures cannot be accurately predicted based on two-dimensional measurements. The ratio of the third moments of two-dimensional and three-dimensional curvatures remains positive and thus the qualitative nature of curvature skewness can still be obtained based on two-dimensional curvature measurements. As the curvature skewness is often taken to be a marker of the Darrius-Landau instability, the conclusion regarding the presence of this instability can potentially be taken from the two-dimensional curvature measurements.

     

A Numerical Study Promoting Algebraic Models for the Lewis Number Effect in Atmospheric Turbulent Premixed Bunsen Flames

This numerical investigation carried out on turbulent lean premixed flames accounts for two algebraic – the Lindstedt–Vaos (LV) and the classic Bray–Moss–Libby (BML) – reaction rate models. Computed data from these two models is compared with the experimental data of Kobayashi et al. on 40 different methane, ethylene and propane Bunsen flames at 1 bar, where the mean flame cone angle is used for comparison. Both models gave reasonable qualitative trend for the whole set of data, in overall. In order to characterize quantitatively, firstly, corrections are made by tuning the model parameters fitting to the experimental methane–air (of Le = 1.0) flame data. In case of the LV model, results obtained by adjusting the pre-constant, i.e., reaction rate parameter, C_R, from its original value 2.6 to 4.0, has proven to be in good agreement with the experiments. Similarly, for the BML model, with the tuning of the exponent n, in the wrinkling length scale, L_y = C_l⋅ l_x(s_L/u′)ⁿ from value unity to 1.2, the outcome is in accordance with the measured data. The deviation between the measured and calculated data sharply rises from methane to propane, i.e., with increasing Lewis number. It is deduced from the trends that the effect of Lewis number (for ethylene–air mixtures of Le = 1.2 and propane–air mixtures of Le = 1.62) is missing in both the models. The Lewis number of the fuel–air mixture is related to the laminar flame instabilities. Second, in order to quantify for its influence, the Lewis number effect is induced into both the models. It is found that by setting global reaction rate inversely proportional to the Lewis number in both the cases leads to a much better numerical prediction to this set of experimental flame data. Thus, by imparting an important phenomenon (the Lewis number effect) into the reaction rates, the generality of the two models is enhanced. However, functionality of the two models differs in predicting flame brush thickness, giving scope for further analysis.