共查询到20条相似文献,搜索用时 0 毫秒
1.
The fracture behavior of a cracked strip under antiplane mechanical and inplane electrical loading is studied. A functionally graded piezoelectric strip with exponential material gradation is under consideration. The mechanical and electrical loading is combined via loading coupling factor. The problem of a graded piezoelectric strip containing a screw dislocation is solved. This solution results in stress and electric displacement components with Cauchy singularity. Based on the solution achieved for the dislocation, the distributed dislocation technique (DDT) is utilized to form any geometry of multiple cracks and analyze the behavior of a cracked strip under antiplane mechanical and inplane electrical loading. This technique is capable of the analysis of a strip with a system of interacting cracks. Several examples including strips with single crack, two straight cracks and two curved cracks are presented. 相似文献
2.
The Schmidt method is adopted to investigate the fracture problem of multiple parallel symmetric and permeable finite length mode-III cracks in a functionally graded piezoelectric/piezomagnetic material plane. This problem is formulated into dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces. In order to obtain the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials. The results show that the stress, the electric displacement, and the magnetic flux intensity factors of cracks depend on the crack length, the functionally graded parameter, and the distance among the multiple parallel cracks. The crack shielding effect is also obviously presented in a functionally graded piezoelectric/piezomagnetic material plane with mul- tiple parallel symmetric mode-III cracks. 相似文献
3.
Propagation of an anti-plane moving crack in a functionally graded piezoelectric strip 总被引:4,自引:0,他引:4
Summary The propagation of an anti-plane moving crack in a functionally graded piezoelectric strip (FGPS) is studied in this paper. The governing equations for the proposed analysis are solved using Fourier cosine transform. The mixed boundary value problems of the anti-plane moving crack, which is assumed to be either impermeable or permeable, are formulated as dual integral equations. By appropriate transformations, the dual integral equations are reduced to Fredholm integral equations of the second kind. For the impermeable crack, the stress intensity factor (SIF) of the crack in the FGPS depends on both the mechanical and electric loading, whereas, the SIF for the permeable crack depends only on the mechanical loading. The results obtained show that the gradient parameter of the FGPS and the velocity of the crack have significant influence on the dynamic SIF.Support from the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. HKU 7081/00E) is acknowledged. Support from the National Natural Science Foundation of China (Project No. 10072041) is also acknowledged. 相似文献
4.
The dynamic interaction of two collinear interface cracks between two dissimilar functionally graded piezoelectric/piezomagnetic material strips subjected to the anti-plane shear harmonic stress waves was investigated. By using the Fourier transform, the problem can be solved with the help of a pair of triple integral equations in which the unknown variable is jump of displacement across the crack surfaces. These equations are solved using the Schmidt method. Numerical examples are provided to show the effect of the functionally graded parameter, the circular frequency of the incident waves and the thickness of the strip upon stress, electric displacement and magnetic flux intensity factors of cracks. 相似文献
5.
Consider two bonded functionally graded piezoelectric material (FGPM) with finite height. Each material contains an arbitrary oriented crack. The material properties are assumed in exponential forms in the direction normal to the interface. The crack surface condition is assumed to be electrically impermeable or permeable. Using the Fourier transform technique, the problem can be reduced to a system of singular integral equations, which are then solved numerically by applying the Gauss-Chebyshev integration formula to obtain the stress intensity factors at the crack tips. Numerical calculations are carried out to obtain the energy density factor S and the energy release rate G. In impermeable case, the energy release rate has been shown to be negative as the electric loads are applied. The positive definite characteristic of the energy density factor makes it possible for predicting the fracture behavior of the cracked structure. The influences of the non-homogeneous parameters and crack orientation on the energy density factors at the crack tips are discussed in detail. The results show that the energy density factor at the crack tip will be increased when the crack tip is located within the softer material. 相似文献
6.
Crack in functionally graded piezoelectric strip bonded to elastic surface layers under electromechanical loading 总被引:9,自引:0,他引:9
Solved is the problem of a crack in a functionally graded piezoelectric material (FGPM) bonded to two elastic surface layers. It is assumed that the elastic stiffness, piezoelectric constant, and dielectric permittivity of the FGPM vary continuously along the thickness of the strip. The outside layers are under antiplane mechanical loading and in-plane electric loading. The solution involves solving singular integral equations by application of the Gauss–Jacobi integration formula. Numerical calculations are carried out to obtain the energy density factors. Their variations with the geometric, loading and material parameters are shown graphically. 相似文献
7.
Summary A finite crack propagating at constant speed in a functionally graded piezoelectric strip (FGPS) bonded to a homogeneous piezoelectric strip is considered. It is assumed that the electroelastic material properties of the FGPS vary exponentially across the thickness of the strip, and that the bimaterial strip is under combined anti-plane mechanical shear and in-plane electrical loads. The analysis is conducted for the electrically unified crack boundary condition, which includes both the traditional permeable and the impermeable ones. By using the Fourier transform, the problem is reduced to the solution of Fredholm integral equations of the second kind. Numerical results for the stress intensity factor and the crack sliding displacement are presented to show the influences of the crack propagation speed, electric loads, FGPS gradation, crack length, electromechanical coupling coefficient, properties of the bonded homogeneous piezoelectric strip and crack location. 相似文献
8.
Bending of functionally graded piezoelectric rectangular plates 总被引:25,自引:0,他引:25
By introducing two displacement functions as well as two stress functions, two independent state equations with variable coefficients
are derived from the three-dimensional theory equations of piezoelasticity for transverse isotropy. A laminated approximation
is used to transform the state equations to those with constant coefficients in each sub-layer. The bending problem of a functionally
graded rectangular plate is then analyzed based on the state equations. Numerical results are presented and the effect of
material gradient index is discussed.
Supported by the National Natural Sciences Foundation of China (No. 10002016). 相似文献
9.
Pei-Wei Zhang Zhen-Gong Zhou Zeng-Tao Chen 《Archive of Applied Mechanics (Ingenieur Archiv)》2008,78(6):411-430
The basic solution of two parallel mode-I permeable cracks in functionally graded piezoelectric materials was studied in this
paper using the generalized Almansi’s theorem. To make the analysis tractable, it was assumed that the shear modulus varies
exponentially along the horizontal axis parallel to the crack. The problem was formulated through a Fourier transform into
two pairs of dual integral equations, in which unknown variables are jumps of displacements across the crack surface. To solve
the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi
polynomials. The solution of the present paper shows that the singular stresses and the singular electric displacements at
the crack tips in functionally graded piezoelectric materials carry the same forms as those in homogeneous piezoelectric materials;
however, the magnitudes of intensity factors depend on the gradient of functionally graded piezoelectric material properties.
It was also revealed that the crack shielding effect is also present in functionally graded piezoelectric materials. 相似文献
10.
11.
In this paper a moving mode-III crack in functionally graded piezoelectric materials (FGPM) is studied. The crack surfaces are assumed to be permeable. The governing equations for FGPM are solved by means of Fourier cosine transform. The mathematical formulation for the permeable crack condition is derived as a set of dual integral equations, which, in turn, are reduced to a Fredholm integral equation of the second kind. The results obtained indicate that the stress intensity factor of moving crack in FGPM depends only on the mechanical loading. The gradient parameter of the FGPM and the moving velocity of the crack do have significant influence on the dynamic stress intensity factor. 相似文献
12.
Studied is the problem of a periodic array of cracks in a functionally graded piezoelectric strip bonded to a homogeneous piezoelectric material. The properties of the functionally graded piezoelectric strip, such as elastic modulus, piezoelectric constant and dielectric constant, are assumed in exponential forms and vary along the crack direction. The crack surface condition is assumed to be electrically impermeable or permeable. Integral transform and dislocation density functions are employed to reduce the problem to the solution of a system of singular integral equations. The effects of the periodic crack spacing, material constants and the geometry parameters on the stress intensity factor, the energy release ratio and the energy density factor are studied. 相似文献
13.
The scattering problem of anti-plane shear waves in a functionally graded material strip with an off-center crack is investigated by use of Schmidt method. The crack is vertically to the edge of the strip. By using the Fourier transform, the problem can be solved with the help of a pair of dual integral equations that the unknown variable is the jump of the displacement across the crack surfaces. To solve the dual integral equations, the jump of the displacement across the crack surfaces was expanded in a series of Jacobi polynomials. Numerical examples were provided to show the effects of the parameter describing the functionally graded materials, the position of the crack and the frequency of the incident waves upon the stress intensity factors of the crack. 相似文献
14.
This paper presents an analytical solution of a thick walled cylinder com- posed of a functionally graded piezoelectric material (FGPM) and subjected to a uniform electric field and non-axisymmetric thermo-mechanical loads. All material properties, except Poisson's ratio that is assumed to be constant, obey the same power law. An exact solution for the resulting Navier equations is developed by the separation of variables and complex Fourier series. Stress and strain distributions and a displacement field through the cylinder are obtained by this technique. To examine the analytical approach, different examples are solved by this method, and the results are discussed. 相似文献
15.
In this paper, the interaction of two parallel Mode-I limited-permeable cracks in a functionally graded piezoelectric material was investigated by using the generalized Almansi's theorem. In the analysis, the electric permittivity of the air inside the crack was considered. The problem was formulated through Fourier transform into two pairs of dual integral equations, in which unknown variables are jumps of displacements across the crack surface. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. The solution of the present paper shows that the singular stresses and the singular electric displacements at the crack tips in functionally graded piezoelectric materials carry the same forms as those in homogeneous piezoelectric materials; however, the magnitudes of intensity factors depend on the electric permittivity of the air inside the crack and the gradient parameter of functionally graded piezoelectric material properties. It was also revealed that the crack shielding effect is also present in functionally graded piezoelectric materials. 相似文献
16.
弹性功能梯度材料板条中周期裂纹的反平面问题 总被引:1,自引:0,他引:1
讨论了弹性功能梯度材料板条中裂纹的反平面问题. 用Fourier
变换方法得到了一个基本解. 这个基本解表示了实轴上一点作用有点位错时引起的影响. 利
用此基本解可得单裂纹和周期裂纹问题的奇异积分方程. 在周期裂纹求解时,
远处裂纹对于中央裂纹的影响作了有效的近似处理. 最后, 给出了数值结果,
它表示了材料性质对于裂纹端应力强度因子的影响. 相似文献
17.
Due to the increasing interests in using functionally graded piezoelectric materials(FGPMs) in the design of advanced micro-electro-mechanical systems, it is important to understand the stability behaviors of the FGPM beams. In this study, considering the effects of geometrical nonlinearity, temperature, and electricity in the constitutive relations and the effect of the magnetic field on the FGPM beam, the Euler-Bernoulli beam model is adopted, and the nonlinear governing equation of motion is ... 相似文献
18.
The dynamic response of a functionally graded orthotropic strip with an edge crack perpendicular to the boundaries is studied. The material properties are assumed to vary continuously along the thickness direction. Laplace and Fourier transforms are applied to reduce the problem to a singular integral equation. Numerical results are presented to illustrate the influences of parameters such as the nonhomogeneity constant and geometry parameters on the dynamic stress intensity factors (SIFs). 相似文献
19.
The dynamic behavior of two parallel symmetric cracks in a piezoelectric strip under harmonic anti-plane shear waves is studied
using the Schmidt method for permeable crack surface conditions. The cracks are parallel to the edge of the strip. By means
of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations. These equations
are solved using the schmidt method. The results show that the stress and the electric displacement intensity factors depend
on the geometry of the cracks, the frequency of incident waves, the distance between cracks and the thickness of the strip.
It is also found that the electric displacement intensity factors for the permeable crack surface conditions are much smaller
than those for the impermeable crack surface conditions.
Project supported by the Post Doctoral Science Foundation of Heilongjiang Province, the Natural Science Foundation of Heilongjiang
Province, the National Science Foundation with the Excellent Young Investigator Award (No. 19725209) and the Scientific Research
Foundation of Harbin Institute of Technology (HIT.2000.30). 相似文献
20.
Jun Liang 《Archive of Applied Mechanics (Ingenieur Archiv)》2008,78(6):443-464
The dynamic behavior of two parallel symmetric cracks in functionally graded piezoelectric/piezomagnetic materials subjected
to harmonic antiplane shear waves is investigated using the Schmidt method. The present problem can be solved using the Fourier
transform and the technique of dual integral equations, in which the unknown variables are jumps of displacements across the
crack surfaces, not dislocation density functions. To solve the dual integral equations, the jumps of displacements across
the crack surfaces are directly expanded as a series of Jacobi polynomials. Finally, the relations among the electric, magnetic
flux, and dynamic stress fields near crack tips can be obtained. Numerical examples are provided to show the effect of the
functionally graded parameter, the distance between the two parallel cracks, and the circular frequency of the incident waves
upon the stress, electric displacement, and magnetic flux intensity factors at crack tips. 相似文献