硫杂杯[4]芳烃衍生物的合成及萃取性能研究

通过两个不同的平台合成了一系列结构新颖的硫杂杯[4]芳烃衍生物,阳离子萃取试验表明该硫杂杯[4]芳烃衍生物比含有相似官能团的杯[4]芳烃衍生物具有更好的软金属离子萃取性能,新化合物的结构经IR, 1H NMR,MS和元素分析等证实.     

硫杂杯[4]芳烃酰胺基硫脲衍生物的合成

硫杂杯[4]芳烃四乙酸乙酯衍生物与水合肼反应生成硫杂杯[4]芳烃四酰肼衍生物(3),3与异硫氰酸苯酯反应得到新型硫杂杯[4]芳烃酰胺基硫脲衍生物,总产率61%。     

新型硫杂杯[4]芳烃衍生物的合成

在对叔丁基硫杂杯[4]芳烃(1)的下缘1,3-位引入芳醛基制得硫杂杯[4]二醛基衍生物(3);3在水合肼中肼解制得硫杂杯[4]二醛腙基衍生物(4);4与5,5'-亚甲基二水杨酰基二水杨酰氯经缩合反应合成了具有桥连结构的硫杂杯[4]芳烃桥联氮杂衍生物(6),3,4和6为新化合物。其结构经1H NMR,IR,ESI-MS和元素分析表征。     

硫杂杯[4]芳烃化学修饰的研究进展

硫杂杯[4]芳烃是由S原子取代经典杯芳烃中的桥联亚甲基而成的大环化合物,在分子识别、多核金属配合物、化学传感器等方面有广泛的应用.对硫杂杯[4]芳烃的化学修饰进行综述,有助于新型功能化硫杂杯芳烃衍生物的研究.     

一些新型含氮、硫杂官能团的杯[4]芳烃衍生物的合成

以杯[4]芳烃-1,3-二溴乙氧基衍生物1为合成平台,在K2CO3/MeCN体系中分别与乙醇胺、L-亮氨醇、2-巯基苯并咪唑、巯基乙酸乙酯反应,以49%～76%的产率合成了4种新型含氮、硫杂官能团的杯[4]芳烃衍生物2,4,5和6.化合物2进一步与异硫氰酸苯酯反应,以84%的产率得到了新型树枝状杯[4]芳烃氮、硫杂衍生物3.新化合物的结构与构象经元素分析、质谱、核磁共振谱等表征证实.     

苄连氮桥联双硫杂杯[4]芳烃的合成

硫杂杯[4]二醛基衍生物(1)在水合肼中肼解,合成了新化合物硫杂杯[4]二醛腙基衍生物(2);1和2在弱酸的催化下反应合成了新的具有对称结构的苄连氮双硫杂杯[4]芳烃(3);2和3的结构经1H NMR,IR,ESI-MS和元素分析表征.     

杯[4]芳烃黄原酸酯衍生物的合成与阳离子萃取性能

以二氧六环作溶剂, 杯[4]芳烃二甲氧基二羟乙氧基衍生物2与氢氧化钾、二硫化碳作用合成了杯芳烃黄原酸盐衍生物3, 并进一步与碘甲烷或氯化苄反应首次合成了含黄原酸酯基的杯芳烃衍生物4a和4b. 阳离子萃取试验表明该新型杯芳烃衍生物比单硫杂杯芳烃衍生物具有更好的过渡金属离子萃取性能.     

(硫杂)杯[4]芳烃缩氨基(硫)脲(桥联)衍生物的合成

对叔丁基(硫杂)杯[4]芳烃-1,3-二醛基衍生物4a和4b与苯基氨基硫脲进行“1＋2”缩合反应, 合成了杯[4]芳烃缩氨基硫脲衍生物5a和5b, 产率为84%和85%. 化合物4a和4b与1,6-己基双氨基脲发生“1＋1”缩合反应, 合成了杯[4]芳烃双缩氨基脲桥联衍生物6a和6b, 产率为83%和80%. 新化合物的结构与构象经元素分析、质谱、核磁共振谱等表征证实.     

含苯并噁唑基的硫桥杯[4]芳烃衍生物的合成及结构

在碳酸钾存在下, 对叔丁基硫桥杯[4]芳烃(1)分别与端基二溴代烷和碘甲烷反应, 生成硫桥杯[4]芳烃衍生物2～4. 含端基溴代的硫桥杯[4]芳烃衍生物2和4分别与2-巯基苯并噁唑在碳酸钾存在下反应, 生成硫桥杯[4]芳烃衍生物5a～5d. 通过1H NMR, 13C NMR, IR, MS和元素分析等手段对产物进行了表征. 同时, X射线分析确定了硫桥杯[4]芳烃5b的晶体结构.     

硫(硒)杂多杯[4]芳烃合成及其络合性能研究

合成了下缘硫、硒杂杯[4]芳烃, 然后与杯芳烃片段2,6-二(溴甲基)-4-甲氧基-甲苯在NaH存在条件下缩合得到硫、硒杂多杯[4]芳烃5a和5b. 离子萃取实验表明硫、硒杂多杯[4]芳烃显著增加了对Ag＋和Hg2＋重金属离子的萃取效果.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.