A new cubic equation of state for reservoir fluids

A new three-parameter cubic equation of state is developed with special attention to the application for reservoir fluids. One parameter is taken temperature dependent and others are held constant. The EOS parameters were evaluated by minimizing saturated liquid density deviation from experimental values and satisfying the equilibrium condition of equality of fugacities simultaneously. Then, these parameters were fitted against reduced temperature and Pitzer acentric factor. For calculating the thermodynamic properties of a pure component, this equation of state requires the critical temperature, the critical pressure, the acentric factor and the experimental critical compressibility of the substance. Using this equation of state, saturated liquid density, saturated vapor density and vapor pressure of pure components, especially near the critical point, are calculated accurately. The average absolute deviations of the predicted saturated liquid density, saturated vapor density and vapor pressure of pure components are 1.4%, 1.19% and 2.11%, respectively. Some thermodynamic properties of substances have also been predicted in this work.     

A new cubic equation of state for simple fluids: pure and mixture

A two-parameter cubic equation of state is developed. Both parameters are taken temperature dependent. Methods are also suggested to calculate the attraction parameter and the co-volume parameter of this new equation of state. For calculating the thermodynamic properties of a pure compound, this equation of state requires the critical temperature, the critical pressure and the Pitzer’s acentric factor of the component. Using this equation of state, the vapor pressure of pure compounds, especially near the critical point, and the bubble point pressure of binary mixtures are calculated accurately. The saturated liquid density of pure compounds and binary mixtures are also calculated quite accurately. The average of absolute deviations of the predicted vapor pressure, vapor volume and saturated liquid density of pure compounds are 1.18, 1.77 and 2.42%, respectively. Comparisons with other cubic equations of state for predicting some thermodynamic properties including second virial coefficients and thermal properties are given. Moreover, the capability of this equation of state for predicting the molar heat capacity of gases at constant pressure and the sound velocity in gases are also illustrated.     

A new three-parameter cubic equation of state for calculation physical properties and vapor–liquid equilibria

A new three-parameter cubic equation of state is presented by combination of a modified attractive term and van der Waals repulsive expression. Also a new alpha function for the attractive parameter of the new EOS is proposed. The new coefficients of alpha function and the other parameters of the attractive term are adjusted using the data of the saturated vapor pressure and liquid density of almost 60 pure compounds including heavy hydrocarbons. The new EOS is adopted for prediction of the various thermophysical properties of pure compounds such as saturated and supercritical volume, enthalpy of vaporization, compressibility factor, heat capacity and sound velocity. Following successful application of the new EOS for the pure components, using vdW one-fluid mixing rules, the new EOSs are applied to prediction of the bubble pressure and vapor mole fraction of the several binary and ternary mixtures. The accuracy of the new EOS for phase equilibrium calculation is demonstrated by comparison of the results of the present EOSs with the PT, PR, GPR and SRK cubic EOSs.     

Modification of Simha–Somcynsky equation of state for small and large molecules

The Simha–Somcynsky equation of state (SS EOS) represents the PVT behavior of polymers quite satisfactorily, but cannot be applied to gases at low pressures. This work proposes a modification of the free volume contribution of the SS EOS to allow representation of gaseous state of low molecular-weight substances by introducing the perturbed hard-chain theory of Beret and Prausnitz into the EOS. In addition to this modification, two universal constants are introduced to the free volume term for better representation of properties of low molecular-weight substances. Characteristic parameters in the modified SS EOS were determined for 44 low molecular-weight substances and 64 polymers. The absolute average deviations (AADs) for critical temperature, critical pressure and vapor pressures were 0.86, 2.38 and 2.01%, respectively, while AAD for critical density and saturated liquid density at normal boiling point were somewhat larger, being 20.46 and 5.30%, respectively. The high performance of the original SS EOS for polymer PVT behavior was maintained in the modified EOS with grand AAD of 0.050% for densities.     

Development of a five-parameter cubic equation of state

A five-parameter van der Waals type cubic equation of state has been developed specifically for representing pure-component volumetric properties. The justification of such an equation is based on the analysis of the variation of the attraction term contribution with reduced density. The parameters have been evaluated on the basis of optimal representation of the three saturated properties (vapor pressure, liquid volume and vapor volume) and the compressed liquid volume, and generalized in terms of critical temperature and the acentric factor. The calculated densities for 17 fluids are compared with those obtained from seven selected equations of state.In addition, individual parameters for carbon dioxide, ethylene, ethane and propane are presented for predicting volumetric behaviors in the critical region useful for supercritical fluid extraction processes.     

Equation of state for square-well chain molecules with variable range. I: Application for pure substances

An equation of state (EOS) for square-well chain molecules with variable range developed on the basis of statistical mechanics for chemical association in our previous work is employed for the calculations of pVT properties and vapor–liquid equilibria (VLE) of pure non-associating fluids. The molecular parameters for 73 normal substances and 46 polymers are obtained from saturated vapor pressure and liquid molar volume data for normal fluids or pVT data for polymers. Linear relations are found for the molecular parameters of normal fluids with their molecular weight of homologous compounds. This indicates that the model parameters of homologous series, subsequently pVT and VLE, can be predicted when experimental data are not available. The predicted saturated vapor pressures and/or liquid volumes are satisfactory through the generalized model parameters. The calculated VLE and pVT for normal fluids and polymers by this EOS are compared with those from other engineering models, respectively.     

Empirical correction to the Peng–Robinson equation of state for the saturated region

This work presents an empirical correction to improve the Peng–Robinson equation of state (PR EOS) for representing the densities of pure liquids and liquid mixtures in the saturated region using the volume translation method. A temperature-dependent volume correction is employed to improve the original PR EOS so that it can match the true critical point of pure fluids. The volume correction is generalized as a function of the critical parameters and the reduced temperature. The volume translation PR (VTPR) EOS with the generalized volume correction accurately represents the saturated liquid densities for different polar and non-polar fluids, including alkanes, cycloparaffins, halogenated hydrocarbons, olefins, cyclic olefins, aromatics and inorganic molecules. The average relative deviations for 91 pure compounds was 1.37%. The generalized VTPR EOS was also used to predict the saturated liquid density of 53 binary mixtures with a relative deviation of 0.98%. The generalized VTPR EOS can also be extended to other materials. The accuracy of the generalized VTPR EOS compares well with other methods and equations of state.     

Description of cyclopropane with Backone equation of state

This paper aims to accurately describe the thermodynamic properties of Cyclopropane with a molecular based BACKONE equation of state. The parameters of the BACKONE equation of state found by fitting to experimental vapor pressures and liquid densities are the characteristic temperature T ₀, characteristic density ρ₀, anisotropy factor α, and reduced quadrupolar moment Q*². The values of these parameters are 393.9583 K, 6.076139 mol/L, 1.295445, and 0.699483, respectively. The average absolute deviation between experimental values and those derived from BACKONE EOS is 0.29% for vapor pressures, 0.75% for saturated liquid densities. The prediction power of the BACKONE equation of state are investigated. It is shown that the uncertainties of values derived from the BACKONE equation of state are within 0.90% for isobaric densities in the liquid phase and 2.0% for enthalpy of evaporation.     

Application of a volume-translated Peng-Robinson equation of state on vapor-liquid equilibrium calculations

A volume-translated Peng-Robinson (VTPR) equation of state (EOS) is developed in this study. Besides the two parameters in the original Peng-Robinson equation of state, a volume correction term is employed in the VTPR EOS. In this equation, the temperature dependence of the EOS energy parameter was regressed by an improved expression which yields better correlation of pure-fluid vapor pressures. The volume correction parameter is also correlated as a function of the reduced temperature. The VTPR EOS includes two optimally fitted parameters for each pure fluid. These parameters are reported for over 100 nonpolar and polar components. The VTPR EOS shows satisfactory results in calculating the vapor pressures and both the saturated vapor and liquid molar volumes. In comparison with other commonly used cubic EOS, the VTPR EOS presents better results, especially for the saturated liquid molar volumes of polar systems. VLE calculations on fluid mixtures were also studied in this work. Traditional van der Waals one-fluid mixing rules and other mixing models using excess free energy equations were employed in the new EOS. The VTPR EOS is comparable to other EOS in VLE calculations with various mixing rules, but yields better predictions on the molar volumes of liquid mixtures.     

A modification to the Peng–Robinson-fitted equation of state for pure substances

In this work we present two modifications to the Peng–Robinson-Fitted equation of state where pure component parameters are regressed to vapor pressure and saturated liquid density data. The first modification (PR-f-mod) is a method that enhances the equation of state pure component property predictions through simple temperature dependent pure component parameters. In the second modification (PR-f-prop) we propose a temperature dependency for co-volume b in the repulsive parameter of the EoS, and revise the temperature function in the attractive term. The agreement with experimental data for 72 pure substances, including highly polar compounds, is remarkably good. We obtain average absolute deviations in saturated liquid density of less than 1% for all substances studied.     

A simple and accurate technique to obtain pure component parameters for three-parameter equations of state

A generalized technique is presented for the calculation of the pure component parameters for the three-parameter equation of state. For illustration, the Usdin-McAuliffe form of cubic equation of state is evaluated.The method requires as input data the vapor pressure and saturated liquid volume of a component at a given temperature. This method may be considered as an extension of Panagiotopoulos-Kumar's method.     

A simple non-classical equation of state for fluids and fluid mixtures

A method for improving the behavior of classical equations of state (EOS) in the critical region, originally proposed by Fox [J.R. Fox, Fluid Phase Equilibria 14 (1983) 45–53], has been modified in this work for the Patel–Teja (PT) EOS [N.C. Patel, A.S. Teja, Chem. Eng. Sci. 37, 463–473]. The application of the new equation (NPT) for predicting PVT and vapor pressure behavior of pure substances, as well as vapor–liquid equilibrium behavior of binary mixtures, is demonstrated. The NPT equation is simple to use and requires the same input information as the original PT equation. However, it reproduces the correct PVT behavior in the critical region. Limitations of both the PT and NPT equations in calculating the isochoric heat capacity are discussed.     

The experiments and correlations of the solubility of ethylene in toluene solvent

Polymer cyclic olefin copolymer (COC) is produced from the reaction of attaching ethyl groups to the norbornene monomer in liquid phase. The first step of process is dissolving ethylene in a liquid phase where toluene is present as a cosolvent. Thus, the solubility of ethylene in liquid toluene is the most important factor affecting the production of COC. In this study, the solubility of ethylene in toluene was measured in the temperature range from 323.15 to 423.15 K and pressure range from 5 to 25 bar. The experiments were conducted by the method of pressure decaying with a newly designed apparatus. The experimental results show that the solubility of ethylene in toluene increases with increasing pressure but decreases with increasing temperature.The experimental solubility data were expressed in the vapor–liquid equilibrium relationship and correlated fairly well by the bubble–pressure calculation with the Peng–Robinson equation of state (PR EOS) incorporated with the van der Waals one-fluid and the Zhong–Masuoka mixing rules with the consideration of binary interaction parameters. The results showed the van der Waals (vdW-1) mixing rule is slightly better than the Z–M mixing rule for pressure correlation but the Z–M mixing rule is slightly better for vapor composition correlation.A semi-empirical solubility equation with four parameters for the present binary system was proposed in this study. This proposed model estimates the solubility easier and as accurate as the PR EOS does for the present system.     

Quintic equation of state for pure substances in sub- and supercritical range

A new quintic equation of state (EOS) for pure substances and mixtures is proposed. The equation is based on critical parameters and one saturation point. The proposed Q5EOS is a generalisation of many cubic equations of state. Equation Q5 has five parameters, four of which are temperature-independent. The temperature-dependent parameter a is expressed by a relation based on a simple power function. Parameters defining this function can be calculated from saturation data, Boyle temperature and supercritical data.     

Modeling phase equilibria of alkanols with the simplified PC-SAFT equation of state and generalized pure compound parameters

The simplified PC-SAFT equation of state has been applied to liquid–liquid, vapor–liquid and solid–liquid equilibria for mixtures containing 1- or 2-alkanols with alkanes, aromatic hydrocarbons, CO₂ and water. For the alkanols we use generalized pure compound parameters. This means that two of the physical pure compound parameters, m (segment number) and σ (segment diameter), are obtained from linear extrapolations, since m and mσ³, increase linearly with respect to the molar mass, and moreover, the two association parameters (association energy and association volume) were assumed to be constant for all alkanols. Only the dispersion energy is fitted to experimental data. Thus it is possible to estimate parameters for several 1- and 2-alkanols. The final aim is to develop a group contribution approach for PC-SAFT which is suitable for complex compounds, considering that the motivation of this project is to obtain a thermodynamic model which can be used in the development of sophisticated products such as pharmaceuticals, polymers, detergents or food ingredients. One of the severe limitations in applying SAFT-type equations of state to these compounds is that the procedure for obtaining the pure compound parameters is usually based on fitting to saturated vapor pressure and liquid density data over an extended temperature range. However, such data are rarely available for complex compounds. To verify the new pure compound parameters, comparisons to ordinary optimized alkanol parameters, where all five pure compound parameters were fitted to experimental liquid density and vapor pressure data, were made. The results show that the new generalized alkanol parameters from this work perform at least as well as other alkanol parameter sets.     

A generalized technique to obtain pure component parameters for two-parameter equations of state

A generalized technique is presented for the calculation of the pure component parameters for use in a general two-parameter equation of state. The method requires as input data the vapor pressure and saturated liquid volume of a component at a given temperature, and is both accurate and simple to use.Correlations for the calculation of the parameters are presented for the van der Waals, Redlich—Kwong and Peng—Robinson forms of cubic equations of state. A comparison is made between the new method and the corresponding-states approach.     

跨接VTSRK方程计算烃类的pVT性质

烃类pVT性质的精细表征对能源动力、化工等领域应用有重要价值,临界区热力性质描述是难点之一.本文建立了烷烃(C1-C20)的跨接比容平移Soave-Redlich-Kwong(SRK)(跨接VTSRK)状态方程,在SRK状态方程的基础上引入了比容平移和跨接方法,以改善饱和液相密度和近临界区域热力学性质的计算精度,方程参数被表达为物质临界参数和偏心因子的函数.比较结果表明,跨接方程对烷烃(C1-C20)饱和蒸气压、饱和气相密度、饱和液相密度的计算平均偏差分别为1.01%、1.83%和0.93%,显著优于原方程,单相区和近临界区的pVT性质计算精度也比原状态方程有较大改善.进一步将方程推广到环烷烃(环丙烷、环戊烷和环己烷)和苯、甲苯的计算,也获得了较好效果,验证了方程的预测能力.     

The prediction of isobaric phase equilibria for non-ideal multicomponent mixtures from heat of mixing data

A method for predicting isobaric binary and ternary vapor—liquid equilibrium data using only isothermal binary heat of mixing data and pure component vapor pressure data is presented. Three binary and two ternary hydrocarbon liquid mixtures were studied. The method consists of evaluating the parameters of the NRTL equation from isothermal heat of mixing data for the constituent binary pairs. These parameters are then used in the multicomponent NRTL equation to compute isobaric vapor—liquid equilibrium data for the ternary mixture. No ternary or higher order interaction terms are needed in the ternary calculations because of the nature of the NRTL equation. NRTL parameters derived from heat of mixing data at one temperature can be used to predict vapor—liquid equilibrium data at other temperatures up to the boiling temperature of the liquid mixture.For the systems studied this method predicted the composition of the vapor phase with a standard deviation ranging from 1–8% for the binary systems and from 4–12% for the ternary systems.     

跨接VTSRK方程计算烃类的pVT性质

烃类pVT性质的精细表征对能源动力、化工等领域应用有重要价值,临界区热力性质描述是难点之一.本文建立了烷烃（C1-C20）的跨接比容平移Soave-Redlich-Kwong（SRK）（跨接VTSRK）状态方程,在SRK状态方程的基础上引入了比容平移和跨接方法,以改善饱和液相密度和近临界区域热力学性质的计算精度,方程参数被表达为物质临界参数和偏心因子的函数. 比较结果表明,跨接方程对烷烃（C1-C20）饱和蒸气压、饱和气相密度、饱和液相密度的计算平均偏差分别为1.01%、1.83%和0.93%,显著优于原方程,单相区和近临界区的pVT性质计算精度也比原状态方程有较大改善. 进一步将方程推广到环烷烃（环丙烷、环戊烷和环己烷）和苯、甲苯的计算,也获得了较好效果,验证了方程的预测能力.