Direct synthesis of a dimeric mixed-anion lead(II) complex,crystal structure of [Pb(phen)(2OCCH3)(NCS)]2

A lead(II) complex with 1,10-phenanthroline (phen) containing two different anions has been synthesized using a direct synthetic method and characterized by IR and CHN elemental analysis. The structure of [Pb(phen)(₂OCCH₃)(NCS)]₂ was confirmed by X-ray crystallography. The single crystal X-ray data of this compound shows the complex to be dimeric as a result of acetate ligand bridging. The Pb atom has an unsymmetrical six-coordinate geometry, being coordinated by three nitrogen atoms of 1,10-phenanhroline and the thiocyanate ligand and three oxygen atoms of the acetate ligand. The arrangement of the 1,10-phenanhroline, acetate and thiocyanate ligands exhibits a coordination gap around the Pb(II) ion, occupied possibly by a stereoactive lone pair of electrons on lead(II), with the coordination around lead atoms being hemidirected. There is a π–π stacking interaction between the parallel aromatic rings that may help to increase the ‘gap’ in the coordination geometry around the Pb(II) ion.     

Solubility, complex formation, and redox reactions in the Tl2O3-HCN/CN(-)-H2O system. Crystal structures of the cyano compounds Tl(CN)3.H2O, Na[Tl(CN)4].3H2O, K[Tl(CN)4], and Tl(I)[Tl(III)(CN)4] and of Tl(I)2C2O4

Thallium(III) oxide can be dissolved in water in the presence of strongly complexing cyanide ions. Tl(III) is leached from its oxide both by aqueous solutions of hydrogen cyanide and by alkali-metal cyanides. The dominating cyano complex of thallium(III) obtained by dissolution of Tl2O3 in HCN is [Tl(CN)3(aq)] as shown by 205Tl NMR. The Tl(CN)3 species has been selectively extracted into diethyl ether from aqueous solution with the ratio CN-/Tl(III) = 3. When aqueous solutions of the MCN (M = Na+, K+) salts are used to dissolve thallium(III) oxide, the equilibrium in liquid phase is fully shifted to the [Tl(CN)4]- complex. The Tl(CN)3 and Tl(CN)4- species have for the first time been synthesized in the solid state as Tl(CN)3.H2O (1), M[Tl(CN)4] (M = Tl (2) and K (3)), and Na[Tl(CN)4].3H2O (4) salts, and their structures have been determined by single-crystal X-ray diffraction. In the crystal structure of 1, the thallium(III) ion has a trigonal bipyramidal coordination with three cyanide ions in the equatorial plane, while an oxygen atom of the water molecule and a nitrogen atom from a cyanide ligand, attached to a neighboring thallium complex, form a linear O-Tl-N fragment. In the three compounds of the tetracyano-thallium(III) complex, 2-4, the [Tl(CN)4]- unit has a distorted tetrahedral geometry. Along with the acidic leaching (enhanced by Tl(III)-CN- complex formation), an effective reductive dissolution of the thallium(III) oxide can also take place in the Tl2O3-HCN-H2O system yielding thallium(I), while hydrogen cyanide is oxidized to cyanogen. The latter is hydrolyzed in aqueous solution giving rise to a number of products including (CONH2)2, NCO-, and NH4+ detected by 14N NMR. The crystalline compounds, Tl(I)[Tl(III)(CN)4], Tl(I)2C2O4, and (CONH2)2, have been obtained as products of the redox reactions in the system.     

Syntheses and structural characterization of New Tl + and K + complexes of 3,5-dinitrobenzoic acid (HDNB), [Tl(μ-DNB)] n and [K(μ-DNB)(μ-HDNB)] n

Two new Tl⁺ and K⁺ complexes of 3,5-dinitrobenzoic acid (HDNB), [Tl(μ-DNB)] _n and [K(μ-DNB)(μ-HDNB)] _n have been synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. Determination of the structure of the [K(μ-DNB)(μ-HDNB)] _n and [Tl(μ-DNB)] _n by X-ray crystallography shows that there are nine coordinate K atoms (KO₉) and eight coordinate Tl atoms (TlO₈). The [Tl(μ-DNB)] _n and [K(μ-DNB)(μ-HDNB)] _n complexes are 2D and 3D coordination polymers, respectively.     

Tl2D coordination polymer involving close Tl?π (aromatic) contacts, [Tl3(μ-BPC)2(μ-NO3)]n

A two-dimensional polymer, [Tl₃(μ-BPC)₂(μ-NO₃)]_n [BPC = biphenyl-2-carboxylate], has been synthesized and characterized. Its single-crystal X-ray structure shows three types of Tl^I-ions with coordination numbers of 5 (Tl1 and Tl2), and 4 (Tl3). Two of the thallium atoms, Tl1 and Tl3, contain close Tl^I?π (aromatic) contacts, thus attaining a total hapticity of 11 and 10 with environments Tl1O₅C₆ and Tl3O₄C₆, respectively.     

Hg(II), Tl(III), Cu(I), and Pd(II) Complexes with 2,2'-Diphenyl-4,4'-Bithiazole (DPBTZ), Syntheses and X-Ray Crystal Structure of [Hg(DPBTZ)(SCN)2]

Reaction of the ligand 2,2′-diphenyl-4,4′-bithiazole (DPBTZ) with Hg(SCN)₂, Tl(NO₃)₃, CuCl, and PdCl₂ gives complexes with stoichiometry [Hg(DPBTZ)(SCN)₂], [Tl(DPBTZ)(NO₃)₃], [Cu(DPBTZ)(H₂O)Cl]_, and [Pd(DPBTZ)Cl₂]. The new complexes were characterized by elemental analyses and infrared spectroscopy. The crystal structure of [Hg(DPBTZ)(SCN)₂] determined by X-ray crystallography. The Hg atom in the title monomeric complex, (2,2′-diphenyl-4,4′-bithiazole)mercury(II)bisthiocyanate, [Hg(C₁₈H₁₂N₂S₂)(SCN)₂], is four-coordinate having an irregular tetrahedral geometry composed of two S atoms of thiocyanate ions [Hg-S 2.4025(15) and 2.4073(15) Å] and two N atoms of 2,2′-diphenyl-4,4′-bithiazole ligand [Hg-N 2.411(4) and 2.459(4) Å]. The bond angle S(3)-Hg(1)-S(4) of 147.46(5)° has the greatest derivation from ideal tetrahedral geometry. Intermolecular interaction between Hg(1) and two S atoms of two neighboring molecules, 3.9318(15) and 3.9640(18) Å, make the Hg(1) distort from a tetrahedron to a disordered octahedron. The attempts for preparation complexes of Tl(I), Pb(II), Bi(III), Cd(II) ions with 2,2′-diphenyl-4,4′-bithiazole ligand were not successful and also the attempts for preparation complexes of 4,4′,5,5′-tetraphenyl-2,2′-bithizole ligand with Cu(II), Ni(II), Co(II), Co(III), Mn(II), Mn(III), Fe(II), Fe(III), Cr(III), Zn(II), Tl(III), Pb(II), Hg(II), Cu(I), Pd(II) were not successful. This point can be regarded as the initial electron withdrawing of phenyl rings and also their spatial steric effects.     

Die Schichtstruktur von Tl[CuAsO4] und Tl[CuPO4] mit Zwischenschichten aus Thallium(I) mit stereoaktivem Elektronenpaar

The Layer Structure of Tl[CuAsO₄] and Tl[CuPO₄] with Layers of Thallium(I) with Stereoactive Lone Pair Single crystals of Tl[CuAsO₄] and Tl[CuPO₄] were prepared by reaction of oxygen with Tl/Cu/As and Tl/Cu/P alloys, respectively. The new isotypic compounds crystallize in spacegroup C2/c with Z = 8 and lattice constants a = 684.70(7) pm, b = 712.64(5) pm, c = 1822.4(2) pm, β = 92.76(1)° for Tl[CuAsO₄] and a = 671.57(8) pm, b = 697.09(6) pm, c = 1789.1(2) pm, β = 93.12(1)° for Tl[CuPO₄]. Square planar [CuO₄]-units are connected by common corners to form undulated [CuO₃]₂-chains running along [010]. Interconnection of the chains by arsenate or phosphate groups results in the formation of anionic cuprate-arsenate- and cuprate-phosphate-slabs, respectively. Along [001] these slabs are alternating with double layers of thallium(I) ions in which the stereochemical activity of the Tl⁺ lone pair is apparent from an hemispheric coordination of thallium by oxygen. The structure is related to that of the orthorhombic form of KCuPO₄.     

Syntheses; 77Se, 203Tl, and 205Tl NMR; and theoretical studies of the Tl2Se6(6-), Tl3Se6(5-), and Tl3Se7(5-) anions and the X-ray crystal structures of [2,2,2-crypt-Na]4[Tl4Se8].en and [2,2,2-crypt-Na]2[Tl2Se4](infinity)1.en

The 2,2,2-crypt salts of the Tl4Se8(4-) and [Tl2Se4(2-)]infinity1 anions have been obtained by extraction of the ternary alloy NaTl0.5Se in ethylenediamine (en) in the presence of 2,2,2-crypt and 18-crown-6 followed by vapor-phase diffusion of THF into the en extract. The [2,2,2-crypt-Na]4[Tl4Se8].en crystallizes in the monoclinic space group P2(1)/n, with Z = 2 and a = 14.768(3) angstroms, b = 16.635(3) angstroms, c = 21.254(4) angstroms, beta = 94.17(3) degrees at -123 degrees C, and the [2,2,2-crypt-Na]2[Tl2Se4]infinity1.en crystallizes in the monoclinic space group P2(1)/c, with Z = 4 and a = 14.246(2) angstroms, b = 14.360(3) angstroms, c = 26.673(8) angstroms, beta = 99.87(3) degrees at -123 degrees C. The TlIII anions, Tl2Se6(6-) and Tl3Se7(5-), and the mixed oxidation state TlI/TlIII anion, Tl3Se6(5-), have been obtained by extraction of NaTl0.5Se and NaTlSe in en, in the presence of 2,2,2-crypt and/or in liquid NH3, and have been characterized in solution by low-temperature 77Se, 203Tl, and 205Tl NMR spectroscopy. The 1J(203,205Tl-77Se) and 2J(203,205Tl-203,205Tl) couplings of the three anions have been used to arrive at their solution structures by detailed analyses and simulations of all spin multiplets that comprise the 205,203Tl NMR subspectra arising from natural abundance 205,203Tl and 77Se isotopomer distributions. The structure of Tl2Se6(6-) is based on a Tl2Se2 ring in which each thallium is bonded to two exo-selenium atoms so that these thalliums are four-coordinate and possess a formal oxidation state of +3. The Tl4Se8(4-) anion is formally derived from the Tl2Se6(6-) anion by coordination of each pair of terminal Se atoms to the TlIII atom of a TlSe+ cation. The structure of the [Tl2Se4(2-)]infinity1 anion is comprised of edge-sharing distorted TlSe4 tetrahedra that form infinite, one-dimensional [Tl2Se42-]infinity1 chains. The structures of Tl3Se6(5-) and Tl3Se7(5-) are derived from Tl4Se4-cubes in which one thallium atom has been removed and two and three exo-selenium atoms are bonded to thallium atoms, respectively, so that each is four-coordinate and possesses a formal oxidation state of +3 with the remaining three-coordinate thallium atom in the +1 oxidation state. Quantum mechanical calculations at the MP2 level of theory show that the Tl2Se6(6-), Tl3Se6(5-), Tl3Se7(5-), and Tl4Se8(4-) anions exhibit true minima and display geometries that are in agreement with their experimental structures. Natural bond orbital and electron localization function analyses were utilized in describing the bonding in the present and previously published Tl/Se anions, and showed that the Tl2Se6(6-), Tl3Se6(5-), Tl3Se7(5-), and Tl4Se8(4-) anions are electron-precise rings and cages.     

Thallium(I) Tropolonates: Synthesis,Structure, Spectral Characteristics,and Antimicrobial Activity Compared to Lead(II) and Bismuth(III) Analogues

Synthesis, single-crystal X-ray determination diffraction and FT-IR, NMR (¹H, ¹³C, ¹⁹F and ²⁰⁵Tl), UV–vis, and luminescence spectra characteristics were described for series of thallium(I) compounds: thallium(I) triflate (Tl(OTf)), 1:1 co-crystals of thallium(I) triflate and tropolone (Htrop), Tl(OTf)·Htrop, as well as simple thallium(I) chelates: Tl(trop) (1), Tl(5-metrop) (2), Tl(hino) (3), with Htrop, 5-methyltropolone (5-meHtrop), 4-isopropyltropolone (hinokitiol, Hhino), respectively, and additionally more complex {Tl@[Tl(hino)]₆}(OTf) (4) compound. Comparison of their antimicrobial activity with selected lead(II) and bismuth(III) analogs and free ligands showed that only bismuth(III) complexes demonstrated significant antimicrobial activity, from two- to fivefold larger than the free ligands.     

The trigonal–bipyramidal triiodo­thallium(III) complex [TlI3{(CH3)2SO}2]

The title compound, bis(dimethyl sulfoxide)triiodo­thallium(III), [TlI₃(C₂H₆OS)₂], was crystallized from equimolar amounts of Tl^II and I₂ in a dimethyl sulfoxide (DMSO) solution. After the initial redox reaction, the thallium(III)–iodo complex forms and precipitates as a DMSO solvate. In the crystal structure, Tl is surrounded by three iodide ligands in the equatorial plane and two O‐coordinated DMSO mol­ecules in the axial positions, forming a slightly distorted trigonal bipyramid. The complex lies on a twofold rotation axis, making the DMSO mol­ecules and two of the I atoms crystallographically equivalent.     

Preparation,characterization and cytotoxic activity of new compounds trans-[PtCl2NH3(3-(hydroxymethyl)-pyridine)] and trans-[PtCl2NH3(4-(hydroxymethyl)-pyridine)]

We report the synthesis, characterization and cytotoxic assays of new trans-platinum compounds, trans-[PtCl₂NH₃(3-(hydroxymethyl)-pyridine)] and trans-[PtCl₂NH₃(4-(hydroxymethyl)-pyridine)]. In the present work, we found that the replacement of the ammine ligand in “classical” transplatinum with the two new ligands does not increase the cytotoxic activity, maybe because these complexes do not produce a stability of the intrastrand cross-links in DNA.     

Poly[bis(μ‐5‐iodoisophthalato)(methanol)dilead(II)] exhibiting a novel centrosymmetric rhombus‐shaped I4 unit

The asymmetric unit of the title compound, [Pb₂(C₈H₃IO₄)₂(CH₄O)]_n, contains two Pb^II atoms, two 5‐iodoisophthalate (5‐IIP²⁻) ligands and one coordinated methanol molecule. One Pb atom is eight‐coordinated, surrounded by seven carboxylate O atoms from five 5‐IIP²⁻ ligands and one O atom from the terminal methanol ligand. The other Pb atom is seven‐coordinated in a hemidirected geometry, surrounded by seven carboxylate O atoms from five 5‐IIP²⁻ ligands. Both Pb atoms are connected by carboxylate groups to form a one‐dimensional infinite rod along the a axis; neighbouring rods are further linked by the aromatic rings of 5‐IIP²⁻ to generate the final three‐dimensional structure with channels in the a direction. An O—H...O hydrogen bond between the methanol ligand and one of the carboxylate groups of a 5‐IIP²⁻ ligand stablizes the three‐dimensional framework. Interestingly, a centrosymmetric rhombus‐shaped I₄ unit is formed by four 5‐IIP²⁻ ligands, with I...I distances of 3.8841 (8) and 3.9204 (8) Å.     

Experimental and theoretical characterization of 3-amino-1-phenyl-2-buten-1-onato ligand and its copper(II) and nickel(II) complexes: synthesis, characterization, X-ray structures, DFT and TDDFT studies

This article presents a combined experimental and computational investigation of 3-amino-1-phenyl-2-buten-1-onato, APBO ligand and its copper(II) and nickel(II) complexes. APBO is an unsymmetrical, bidentate and monoanionic ligand with different coordinating atoms (N,O). A comparison among different possible conformers of the ligand has been carried out using density functional theory (DFT) method at the B3LYP/6-31+G(d,p) level. It was demonstrated that two factors control stability of the compounds as hydrogen bonding (conventional and nonconventional) and resonance effect. The effectiveness of each of these parameters on the stability of ligands is discussed. The prepared homoleptic complexes of [Ni(APBO)₂] and [Cu(APBO)₂] were characterized with IR, NMR, UV–Vis spectroscopic techniques. The X-ray crystallography of [Ni(APBO)₂] demonstrated that the bidentate APBO binds to the metal center in trans fashion and the geometry around the nickel atom is square planar. The experimental studies on the complexes were accompanied computationally by the DFT and time-dependent DFT calculations.     

Highly polyhapto-aromatic interactions in thallium(I) coordination

In the solid state, the Tl(I) complex of 4-hydroxybenzoate (HB⁻), [Tl(HB)]_n (1), can be regarded as containing polymeric chains linked through 2 × η⁶ interactions of the Tl atoms with phenyl groups from adjacent units. The thallium atoms contain close Tl^I ? π (aromatic) contacts, thus attaining a total hapticity of 16 with environments TlO₄C₁₂. The unusually high coordination number in the this compound may reflect the capacity of Tl(I) to act as both a Lewis acid and a Lewis base.     

Synthesis of the new ligand bis[3-(2-pyrazinyl-pyrazol-1-yl) dihydroborate,and the crystal structures of its complexes with thallium(I) and lead(II)

Reaction of 3-(2-pyrazinyl)pyrazole with KBH₄ in a 21:1 ratio afforded the new ligand bis3, 2, 1dihydroborate [L]⁻a bis(pyrazolyl)borate in which each pyrazolyl ring is functionalised with a pyrazin-2-yl group at the C³ position[L]⁻ is therefore a potentially chelating tetradentate ligand with two externally-directed N atoms (the pyrazinyl N⁴ atoms) which are available for additional metal–ion bindingleading to eg coordination polymers The crystal structure of [TlL] shows it to be a simple mononuclear complex with the Tl(I) ion coordinated in the N₄ binding pocket of the ligandand the externally-directed N atoms involved only in intermolecular N H–C hydrogen-bonding interactions The two Tl–N bonds to the pyrazolyl N² atoms (average length 270 Å) are much shorter than the bonds to the pyrazinyl N¹ atoms (average length 305 Å) also there is an obvious gap in the apical position of the metal–ion coordination sphere characteristic of a stereochemically active lone pair The crystal structure of [PbL₂] Et₂O shows that the Pb(II) centre is nine-coordinate with two tetradentate chelating ligands and the ninth donor being a pyrazinyl N⁴ atom from an adjacent complex unit The molecules therefore form infinite one-dimensional chains in the crystal via bridging pyrazinyl groups The coordination geometry about the Pb(II) ions is approximately capped square antiprismatic with no obvious gap in the coordination sphere suggesting that the lone pair is stereochemically inactive.     

A Six-Coordinate Tris(3,5-dimethyl-1-pyrazolyl)methane-Thallium(I) Complex with a Stereochemically Inactive Lone Pair: Syntheses and Solid State Structures of {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6) and {[HC(3,5-Me(2)pz)(3)]Tl}PF(6) (pz = Pyrazolyl)

The addition of the tris(pyrazolyl)methane ligand HC(3,5-Me(2)pz)(3) (pz = pyrazolyl ring) to a THF solution of TlPF(6) results in the immediate precipitation of {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6). The structure has been determined crystallographically. The arrangement of the nitrogen donor atoms about the thallium is best described as a trigonally distorted octahedron. The thallium atom sits on a crystallographic center of inversion; thus the planes formed by the three nitrogen donor atoms of each ligand are parallel. The Tl-N bond distances range from 2.891(5) to 2.929(5) ? (average = 2.92) ?. The lone pair on thallium is clearly stereochemically inactive and does not appear to influence the structure. The pyrazolyl rings are planar, but are tilted with respect to the thallium atom so as to open up the N.N intraligand bite distances. The thallium(I) complex with a ligand to metal ratio of 1/1, {[HC(3,5-Me(2)pz)(3)]Tl}PF(6), is prepared in acetone by the reaction of equimolar amounts of HC(3,5-Me(2)pz)(3) and TlPF(6). The structure of the cation is a trigonal pyramid, with Tl-N bond distances that range from 2.64(1) to 2.70(1) ? (average = 2.67) ?. Pyrazolyl ring tilting is also observed in this complex, but the degree of tilting is smaller. Crystal data for {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6): monoclinic, P2(1)/c, a = 9.210(6) ?, b = 13.36(1) ?, c = 16.067(8) ?, beta = 92.48(5) degrees, V = 1975(2) ?(3), Z = 2, R = 0.029. For {[HC(3,5-Me(2)pz)(3)]Tl}PF(6): monoclinic, P2(1)/n, a = 10.685(2) ?, b = 16.200(5) ?, c = 13.028(3) ?, beta = 94.02(2) degrees, V = 2249.6(8) ?(3), Z = 4, R = 0.042.     

Unique Ag-C bonds, thermal, fluorescence, structural and solution studies of two-dimensional silver(I) coordination polymer

A 2D polymer with unique Ag-C bonds, [Ag(μ₄-DPOAc)]_n (1) [DPOAc = diphenylacetate], has been synthesized and characterized and its structure was determined by X-ray crystallography. In addition to the coordination to the O atoms of DPOAc the Ag atoms also form strong η¹ Ag-C π bonds and exhibit weak Ag-Ag interactions, resulting in the formation of O₃CAg?AgO₃C moieties. The thermal stabilities of 1 and of its thallium(I) analogue, [Tl(μ₃-DPOAc)]_n (2), were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). The ligand and compounds 1-2 are luminescent in the solution state, with emission maxima at 370, 383 and 360 nm, respectively. The results of studies of the stoichiometry and formation of complexes of 1 and 2 in DMF solution were found to be in support of their solid state stoichiometry.     

Über Thallium(I)-chlorooxomolybdate: Synthese und Kristallstrukturen von Tl[MoOCl4(NCCH3)], Tl[Mo2O2Cl7] und Tl2[Mo4O4Cl14] und die Struktur von Tl2[MoCl6]

On Thallium(I)-oxochloromolybdates: Synthesis and Crystal Structures of Tl[MoOCl₄(NCCH₃)], Tl[Mo₂O₂Cl₇], and Tl₂[Mo₄O₄Cl₁₄] and the Structure of Tl₂[MoCl₆] Black crystals of Tl₂[MoCl₆] are formed in the reaction of TlCl with MoOCl₃ in a sealed evacuated glass ampoule at 350 °C. The crystal structure analysis shows that Tl₂[MoCl₆] (cubic, Fm 3¯m, a = 986.35(7) pm) adopts the K₂[PtCl₆] structure with a Mo–Cl bond length of 236.6 pm. Tl[MoOCl₄(NCCH₃)] was obtained by the reaction of TlCl with MoOCl₃ in acetonitrile in form of yellow, moisture sensitive crystals. The structure (orthorhombic, Cmcm, a = 746.0(1), b = 1463.8(3), c = 857.3(2) pm) is built of Tl⁺ cations and octahedral [MoOCl₄(NCCH₃)]^– anions in which the acetonitrile ligand is bound in trans position to the oxygen. The reaction of TlCl and MoOCl₃ in dichloromethane yields Tl[Mo₂O₂Cl₇] and Tl₂[Mo₄O₄Cl₁₄] as green moisture sensitive crystals. The structure of Tl[Mo₂O₂Cl₇] (orthorhombic, Pmmn, a = 694.3(1), b = 951.9(2), c = 904.7(1) pm) consists of Tl⁺ cations and dinuclear [Mo₂O₂Cl₇]^– anions, with two equidistant chlorine bridges of 248.2 and one longer chlorine bridge of 265.7 pm. The oxygen atoms are located in the trans positions of the longer chloro bridge. The structure of Tl₂[Mo₄O₄Cl₁₄] (triclinic, P1¯, a = 692.8(1), b = 919.6(1), c = 998.9(1) pm, α = 104.94(1)°, β = 90.31(1)°, γ = 108.14(1)°) is build of Tl⁺ cations and [Mo₄O₄Cl₁₄]^2– anions which form tetramers of distorted octahedral, edgesharing (MoOCl₅) units with chlorine atoms in the bridging positions. The oxygen atoms are located in the trans positions of the longest chlorine bridges.     

Darstellung und Kristallstruktur von Tris[1,3-bis(phenyltriazenido)benzol]-di-thallium(III)

Synthesis and Crystal Structure of Tris[1,3-bis(phenyltriazenido)benzene]-di-Thallium(III) Tris[1,3-bis(phenyltriazenido)benzene]-di-thallium(III) is formed by the reaction of di-sodium-1,3-bis(phenyltriazenido)benzene with thallium(I)-sulfate in a THF/H₂O mixture in the presence of oxygen. The compound crystallizes in the triclinic space group P1 1 with the lattice parameters a = 1368.8(2), b = 1539.3(2), c = 1676.0(3) pm, α = 106.04(3)°, β = 90.50(3)°, γ = 109.94(3)° and two formula units in the unit cell. The complex consists of two Tl atoms and three ligands, of which each N₃-unit acts as bidentate chelating group. The coordination sphere of Tl is trigonal prismatic with a coordination number of 6. The distances Tl? N range from 228 to 244 pm.     

Thallophilic interactions in aryloxide compounds: the [Tl2(mu2-OAr)4] structural motif in (TlOAr)4 and Tl2Cu(OAr)4 compounds

Two thallium aryloxide compounds TlOC6F5 (TlOAr(F)) and bis-3,5-TlOC6H3(CF3)2 (TlOAr') have been recrystallized from THF and crystallographically characterized in different isomeric forms. The latter compound forms a solvated tetrameric cubane, [TlOAr']4.THF, 1. The TlOAr(F) compound crystallized with a similar stoichiometry, [TlOAr(F)]4.2 THF, 2, but contains a [Tl2(mu2-OAr(F))4] unit that includes a thallophilic interaction at a distance of 3.5943(15) angstroms. Solution 205Tl and 203Tl NMR studies of 1 and 2 support the retention of a cubane structure for 1 in solution and suggest a similar structure for 2 with coupled thallium centers down to -90 degrees C. Fluorescence spectroscopy data for both compounds 1 and 2 in THF are consistent with LMCT. DFT calculations of 1, 2, and three models of the [Tl2(mu2-OAr(F))4] unit show a bonding overlap of the bridged thallium atoms in 2 and are also used to describe the bonding in 1. The structures of two heterobimetallic compounds, Tl2Cu(OAr(F))4, 4, and Tl2Cu(OAr')4, 5, with the [Tl2(mu2-OAr(F))4] structural motif and thallophilic contacts of 3.86(6) and 3.564(1) angstroms, respectively, are described. The crystal structures of the unsolvated of TlOAr(F), 2b, solvated heterobimetallic derivative Tl2Cu(OAr')4.2THF, 5b, and the monomeric (18-crown-6)TlOAr(F), 3, and 205Tl NMR spectra of TlOC6H5, 6, are also reported for comparison purposes.     

Reaction of Tetracopper(I)-Phosphonitocavitand with PhSeSiMe3: Synthesis and Structure of a Polyanionic Cluster [pyH]6[(CuCl)9(μ3-SePh)5(μ4-SePh)]

Treatment of tetracopper(I)-phosphonitocavitand [1·Cu₄(μ-Cl)₄(μ₄-Cl)] (2) (1 = tetraphosphonitocavitand [rccc-2,8,14,20-tetrakis-(iso-butyl)-phosphonitocavitand (C₄₄H₄₈O₈P₄Ph₄)]) with PhSeSiMe₃ in THF at low temperature afforded a novel polyanionic cluster [pyH]₆[(CuCl)₉(μ₃-SePh)₅(μ₄-SePh)] (4) as a major product along with a new tetracopper(I)-phosphonitocavitand (3) with a centered μ₃-Cl. Molecular structure of anionic cluster in 4 consists of six PhSe⁻ bridging ligands containing five μ₃-SePh and one exceptional μ₄-SePh bridging nine copper atoms, of which eight copper atoms have trigonal coordination geometry and the other has distorted tetrahedral geometry. Dedicated to Professor Han-Qin Liu on the occasion of his 70th birthday.