Asymmetric epoxidation catalyzed by novel azacrown ether-type chiral quaternary ammonium salts under phase-transfer catalytic conditions

Asymmetric epoxidation of (E)-chalcone with alkaline hydrogen peroxide by novel chiral phase-transfer catalysts (chiral PTCs) with quaternary ammonium salts of azacrown ether proceeded in high yield and good enantioselectivity. Remarkably, this reaction depended on the length of the carbon chain on the nitrogen atom with the chiral PTCs and on the bulk of the base.     

Spectrofluorimetric determination of tannins based on their activative effect on the Cu(II) catalytic oxidation of rhodamine 6G by hydrogen peroxide

A simple and highly sensitive kinetic fluorimetric method is proposed for the determination of trace tannins, based on the activation of tannins on the oxidation of rhodamine 6G (Rh 6G) by hydrogen peroxide catalyzed by Cu(II) ion. The calibration graph was rectilinear in the range 0.08-1.28 mg l⁻¹ for tannin, the 3σ detection limit for tannin is 0.0455 mg l⁻¹. The relative standard deviation for 11 determinations of 0.4 mg l⁻¹ tannin is 0.96%. The proposed method has been successfully used to determine tannins in tea and Chinese gall. The results obtained were compared with those provided by the Folin-Ciocalteu method. This is the first procedure to be reported for the determination of tannins based on fluorimetric measurements.     

Asymmetric sulfoxidation of prochiral sulfides using aminoalcohol derived chiral C3-symmetric trinuclear vanadium Schiff base complexes

A series of trimeric variants of the efficient and well known Bolm’s chiral vanadium salen catalysts are reported. These C₃-symmetric trinuclear chiral Schiff bases were synthesized by condensing a variety of trialdehydes with optically active aminoalcohols. The catalytic activity of the chiral vanadium complexes of these ligands was investigated for the enantioselective oxidation of prochiral sulfides using hydrogen peroxide as an oxidant. The procedure afforded the corresponding sulfoxide in good yield and the enantioselectivities were comparable to those obtained with the mononuclear complexes.     

Convenient synthesis of mono(6-N-allylamino-6-deoxy)permethylated β-cyclodextrin: a promising chiral selector for an HPLC chiral stationary phase

Mono(6-(p-toluenesulfonyl))permethylated β-cyclodextrin, a versatile precursor for a wide variety of mono-functionalized permethyl β-cyclodextrins, has been generated successfully by the direct methylation of monotosylated cyclodextrin. This afforded a convenient synthesis of mono(6^A-N-allylamino-6^A-deoxy)permethylated β-cyclodextrin. Hydrosilylation of the chiral selector with (EtO)₃SiH and reaction of the resultant reactive siloxane with pristine silica gel afforded a facile entry into a structurally well-defined chiral HPLC stationary phase.     

Asymmetric sulfoxidation of phenacyl phenyl sulfide using chiral vanadium(IV) complexes

Asymmetric sulfoxidation of phenacyl phenyl sulfide was performed in the presence of bis(acetylacetonanto) oxovanadium(IV) complexes with chiral Schiff bases, which were generated in situ. Chlorine dioxide and hydrogen peroxide as oxidants were compared.     

Ab initio study of chiral recognition in the propylene imine.hydrogen peroxide complex

High level ab initio calculations were employed to study the chiral recognition effect in several chiral molecular pairs that consist of the propylene imine and hydrogen peroxide molecules. The potential energy surfaces for the complexes formed between S-cis-1,2-propylene imine and the two enantiomeric forms of hydrogen peroxide were constructed, using the calculated interaction energies at different separations and orientations. The energy calculations were done using the MOLPRO suite of programs with CCSD(T)/cc-pVDZ. The energies were counterpoise corrected at every point to eliminate the basis set superposition error. Complete geometry optimizations were further carried out for the molecular complexes consisting of the cis- or trans-propylene imine isomers and the two enantiomeric forms of hydrogen peroxide. The geometry optimizations were done using the Gaussian 98 and 03 suites of programs, with MP2/aug-cc-pVDZ being the highest level used. Altogether, eight stable complexes were identified, and the corresponding dissociation energies were calculated with MP2/aug-cc-pVTZ. The largest chirodiastaltic energy is found at 0.74 kcal mol(-1) for the (syn)trans-propylene imine.hydrogen peroxide complexes, where hydrogen peroxide acts as a hydrogen donor and is on the opposite side of the ring from the methyl group. The rotational constants, dipole moments, and harmonic frequencies of the complexes are presented to assist future spectroscopic investigations.     

Asymmetric synthesis of axially chiral benzamides and anilides utilizing planar chiral arene chromium complexes

Optically active axially chiral 2,6-disubstituted benzamides and anilides were stereoselectively prepared by utilizing planar chiral (arene)chromium complexes. Nucleophilic addition to enantiomerically pure planar chiral tricarbonyl(N,N-diethyl-2-methyl-6-formyl- (or 6-acyl)benzamide)chromium complex gave axially chiral 2-methyl-6-substituted N,N-diethyl benzamide chromium complexes with high selectivity. An alternative method for the preparation of axial chiral benzamides or anilides is an enantiotopic lithiation at the benzylic methyl of prochiral tricarbonylchromium complexes of N,N-diethyl-2,6-dimethylbenzamide and N-methyl-N-acyl-2,6-dimethylaniline with a chiral lithium amide followed by electrophilic substitution. The resulting axially chiral chromium-complexed benzamides and anilides were oxidized in air to give chromium-free axially chiral benzamides and anilides in enantiomerically enriched form without axial bond rotation at room temperature.     

Hydroxyethylammonium monosubstituted cyclodextrin as chiral selector for capillary electrophoresis

A novel cationic cyclodextrin, mono-6^A-(2-hydroxyethyl-1-ammonium)-6^A-β-cyclodextrin chloride (HEtAMCD) has been successfully synthesized and applied as chiral selector in capillary electrophoresis. The NMR study revealed this chiral selector has three recognition sites: β-CD, ammonium cation and hydroxy group in the sidearm to contribute three corresponding driving forces including inclusion complexation, electrostatic interaction and hydrogen bonding. The effect of buffer pH and HEtAMCD concentration (2.5–10 mM) on enantioselectivity, chiral resolution as well as effective mobility of analytes was investigated. This elegantly designed CD exhibits outstanding enantioselectivities toward the studied hydroxyl acids and ampholytic racemates in CE with the aid of extra hydrogen bonding. Under optimum pH 6.0, chiral resolutions over 5 can be readily obtained for hydroxy acids with CD concentration below 5 mM. The comparison study between HEtAMCD and our earlier reported ammonium CDs indicates the hydroxyethylammonium group of HEtAMCD significantly increased the enantioselective capability.     

Separation of ofloxacin enantiomers by capillary electrophoresis with fluorescence detection using deoxyribonucleic acid oligonucleotides as chiral selectors

This study used capillary electrophoresis with fluorescence detection- and a partial-filling mode-based method for chiral separation of ofloxacin. The deoxyribonucleic acid oligonucleotides with different base sequences were studied as potential chiral selectors including deoxyribonucleic acid tetrahedron, G-quadruplex, and G-riched double-strand deoxyribonucleic acid. Under the optimized conditions, all the deoxyribonucleic acid chiral selectors exhibited excellent chiral separation capabilities with a resolution higher than 1.5. The electrophoretic behavior of the ofloxacin enantiomer might result from the intermediate conjugate with different stabilities between chiral selectors and analytes by a combination of the hydrogen bond and spatial recognition structure. Moreover, satisfactory repeatability regarding run-to-run and interday repeatability was obtained, and all the relative standard deviation values of migration times and resolutions were below 4% (n = 6). Conclusively, both spatial structure and arrangement of the G bases potentiated the chiral separation capability of deoxyribonucleic acid for ofloxacin enantiomer. This work offered a stepping stone for enantioseparation using deoxyribonucleic acid as chiral selectors.     

Synthesis and characterization of fluorinated liquid-crystalline elastomers containing chiral liquid-crystalline crosslinking units

Fluorinated chiral liquid-crystalline elastomers (LCEs) were graft copolymerized by a one-step hydrosilylation reaction with polymethylhydrogenosiloxane, a fluorinated LC monomer 4-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)phenyl 4-(undec-10-enoyloxy)benzoate (PPUB) and a chiral crosslinking LC monomer (3R,3aR,6S,6aR)-6-(undec-10-enoyloxy)hexahydrofuro[3,2-b]furan-3-yl 4′-(4-(allyloxy)benzoyloxy)biphenyl-4-carboxylate (UHAB). The chemical structure, liquid-crystalline behavior and polarization property were characterized by use of various experimental techniques. The effective crosslink density of the LCEs was characterized by swelling experiments. The thermal analysis results showed that the temperatures at which 5% weight loss occurred were greater than 250 °C for all the LCEs, and the residue weight nearby 600 °C increase with increasing chiral crosslinking components in the polymer systems. All the samples showed chiral smectic C mesophase when they were heated. The glass transition temperature and mesophase-isotropic phase transition temperature of fluorinated elastomers increased slightly with increase of chiral crosslinking mesogens in the polymer systems, but the enthalpy changes of mesophase-isotropic phase transition decreased slightly. In XRD curves, all the samples exhibited strong sharp reflections at small angles suggesting smectic layered packing arrangement. These fluorinated chiral LCEs showed 0.1–0.2 μC/cm² of spontaneous polarization with increasing chiral crosslinking component.     

Synthesis of a novel class of chiral N,N,N-tridentate pyridinebisimidazoline ligands and their application in Ru-catalyzed asymmetric epoxidations

A new class of easily tunable N,N,N-pyridinebisimidazoline (pybim) ligands have been synthesized. The synthesis and tunability of these chiral tridentate ligands are much easier and flexible compared to the popular pyboxes, making the former a suitable ligand tool box for various asymmetric transformations. Ruthenium complexes of the new ligands were synthesized and applied in the asymmetric epoxidation of olefins using hydrogen peroxide as the oxidant. Excellent yields and moderate to good enantioselectivities were achieved in the epoxidation of aromatic olefins.     

Immobilized penicillin G acylase as reactor and chiral selector in liquid chromatography

In this paper, the use of penicillin G acylase (PGA) as a biocatalyst and as a chiral selector is described. Penicillin G-acylase is an interesting enzyme used in the manufacture of semisynthetic antibiotics and, in particular, in the production of 6-APA by hydrolysis of penicillin G. Five PGA-based HPLC columns have been prepared by using two different silica supports by employing two immobilization methods, namely "in situ" and "in batch". The effects of the immobilization techniques and of different silica pore size on the catalytic properties of the enzyme as well as the applicability of the PGA-bonded stationary phases as chiral selectors for a number of chiral drugs have been investigated. The HPLC columns based on immobilized PGA combine the hydrolytic activity and the chiral recognition properties of PGA, therefore they have been used for the development of a combined reaction-separation system for chiral and achiral substrates.     

Comparison of enantiomer separation on two chiral stationary phases derived from (+)-18-crown-6-2,3,11,12-tetracarboxylic acid of the same chiral selector

Liquid chromatographic comparisons for enantiomer resolution of α-amino acids and chiral primary amino compounds were made using chiral stationary phases (CSPs) prepared by covalently bonding (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid (18-C-6-TA) of the same chiral selector. The resolution of all α-amino acids on CSP 1 developed in our group was found to be better than that on CSP 2 reported by Machida et al. All α-amino acids examined in this study were well enantioseparated on CSP 1 (α=1.22–2.47), while four analytes were not resolved or all the other analytes were poorly resolved on CSP 2 than on CSP 1. However, in resolving the primary amino compounds without a carbonyl group, CSP 1 was comparable with CSP 2. Although (+)-18-C-6-TA of the same chiral selector was used to prepare CSP 1 and CSP 2, this study showed that different connecting methods for the CSPs might influence their ability to resolve the analytes depending on their structures related to the chiral recognition mechanism.     

Optical rotation and two chiral C atoms of aliphatic cyclic dipeptides

Accurate geometries structures and total energies have been determined for the conformers of cyclo(L-Pro-Gly), cyclo(L-Ala-L-Ala), and cyclo(L-Pro-Ala) in the gaseous phase, using HF and B3LYP correlation methods at 6−31++G(d), 6−311++G(d, p), 6−311++G(2d, 2p) and aug-cc-pvdz basis sets. High level computations MP2 with 6−311++G(2d, 2p) basis set indicate that the relative stabilities of the available conformers can be determined correctly at the B3LYP/6−311++g(2d, 2p) level of theory. We have also described the implementation of DFT and HF theory for calculations of the optical rotation at 589.3 nm. In L-Ala-L-Ala, and L-Pro-Ala molecules, they have two chiral C (C*), so we discuss the different effect of two chiral C to optical activity of cydo(L-Pro-Gly), cyclo(L-Ala-L-Ala), and cyclo(L-Pro-Ala).     

Mono‐6A‐(4‐methoxybutylamino)‐6A‐β‐cyclodextrin as a chiral selector for enantiomeric separation

A new member of the family of methoxylalkylamino monosubstituted β‐cyclodextrins, mono‐6^A‐(4‐methoxybutylamino)‐6^A‐β‐cyclodextrin, has been developed as a chiral selector for enantioseparation in capillary electrophoresis. This amino cyclodextrin exhibited good enantioselectivities for 16 model acidic racemates including three dansyl amino acids at an optimum pH of 6.0. Excellent chiral resolutions over six were obtained for α‐hydroxy acids and 2‐phenoxypropionic acids with 3.0 mM chiral selector. The good chiral recognition for α‐hydroxyl acids was attributed to inclusion complexation, electrostatic interactions, and hydrogen bonding. The hydrogen‐bonding‐enhanced chiral recognition was revealed by NMR spectroscopy. The chiral separation of acidic racemates was further improved with the addition of methanol (≤10 vol%) as an organic additive.     

The preparation of new chiral diphenyl-substituted macrocyclic polyether-diester compounds and their enantiomeric recognition of chiral organic ammonium salts

A series of chiral diphenyl-substituted macrocyclic polyether-diester ligands have been prepared from the chiral diphenyl-substituted tetraethylene glycol. Enantiomeric recogntion by the chiral diphenyl-substituted pyridino-diester-18-crown-6 compound ( 7 ) was studied by temperature dependent ¹H NMR spectroscopy in deuteriodichloromethane. This ligand exhibited chiral recognition when complexed with the hydrogen per-chlorate salts of (R)- and (S)-α-(1-naphthyl)ethylamine and (R)- and (S)-methyl phenylalaninate.     

A family of single-isomer positively charged cyclodextrins as chiral selectors for capillary electrophoresis: mono-6A-butylammonium-6A-deoxy-beta-cyclodextrin tosylate

A novel single-isomer positively charged beta-cyclodextrin (beta-CD), mono-6(A)-butylammonium-6(A)-deoxy-beta-cyclodextrin tosylate (BuAM-beta-CD), has been synthesized, characterized, and used for the enantioseparations of alpha-hydroxy acids, carboxylic acids, and ampholytic analytes by capillary electrophoresis in acidic aqueous background electrolytes. The effective mobilities of all studied analytes decreased with increasing concentration of CD. Satisfactory resolutions were obtained for alpha-hydroxy acids over a wide range of chiral selector concentration. The optimum CD concentration was lower than 5 mM for the carboxylic acids, while higher than 20 mM for alpha-hydroxy acids. Inclusion complexation in combination with ion pair interaction seemed to account for the chiral discrimination process. The hydrogen bonding may provide secondary contribution for the chiral resolution of alpha-hydroxy acids. In addition, BuAM-beta-CD was further proved to be an effective chiral selector for anionic analytes by the baseline enantioseparation of a six-acid mixture within 20 min.     

The synthesis of a chiral fluoxetine intermediate by catalytic enantioselective hydrogenation of benzoylacetamide

In the presence of a chiral BINAP–ruthenium(II) catalyst, asymmetric hydrogenation of β-keto propanoic acid N-methyl amide under 200 psi of hydrogen pressure furnished the corresponding 3-hydroxypropanoic acid N-methyl amide as the single enantiomer. The product can be used as an intermediate for chiral fluoxetine.     

Highly stable chiral (A)6-B supramolecular copolymers: a multivalency-based self-assembly process

A novel type of chiral layered supramolecular copolymer with high molecular weight has been assembled from a hydrogen bonded C(6)-symmetric zinc porphyrin hexamer and chiral C(3)-symmetric pyridine hexadentate linkers driven by multivalent zinc porphyrin-pyridine coordination. UV-vis, circular dichroism, and static light scattering experiments revealed that the formation of the layered supramolecular copolymers is at first dynamically controlled and then becomes thermodynamically controlled.     

A theoretical investigation into chiral phosphoric acid-catalyzed asymmetric Friedel-Crafts reactions of nitroolefins and 4,7-dihydroindoles: reactivity and enantioselectivity

This article mainly focused on high level Density Functional Theory (DFT) studies on the chiral phosphoric acid-catalyzed Friedel-Crafts reactions between 4,7-dihydroindoles and nitroolefins. Firstly, the reactivities of 4,7-dihydroindole and indole in the chiral phosphoric acid-catalyzed Friedel-Crafts reactions with nitroolefin have been compared. The higher reactivity of 4,7-dihydroindole could be attributed to its higher HOMO energy as well as its more suitable trajectory to attack the nitroolefin in the transition state. Secondly, the origin of the enantioselectivity of the chiral phosphoric acid-catalyzed Friedel-Crafts reaction of 4,7-dihydroindole with nitroolefin has been studied using complete models on PBE1PBE/[6-311+G(d,p), 6-31G(d,p)] level. When (S)-1b was used as the catalyst, the enantioselectivity of the reaction is entirely controlled by the steric effect between the catalyst and the substrate. Whereas for catalyst (S)-1c the enantioselectivity is determined by the solvent effect.