A bilayer organic light-emitting diode using a blue-fluorescent yttrium complex, tris(1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone)-(2,2′-dipyridyl) yttrium [Y(PMIP)3(Bipy)] (YPB) as an emitting material and poly(N-vinylcarbazole) (PVK) as a hole-transporting material emitted bright green light instead of blue light. It was attributed to the exciplex formation at the solid interface between the PVK and YPB layers, which was demonstrated by the measurement of the absorption, photoluminescence (PL) and photoluminescence excitation (PLE) spectra of the mixture of PVK and YPB (molar ratio 1:1). The device exhibited a maximum luminance of 177 cd/m2 and a peak power efficiency of 0.02 lm/W. 相似文献
The synthesis of new difunctional (i.e., light-emitting and hole-transporting) fluorophore molecules, 2,2′-difuryl-4,4′-(N,N,N′,N′-tetraphenyl)diaminobiphenyl and 5,5′-bis(4-N,N′-diphenylaminophenyl)-2,2′-bifuryl, which contain hole-transporting triphenylamino units, are reported. These difunctional molecules emit intense blue photoluminescence and further reveal high HOMO energy values as well as high glass transition temperatures. 相似文献
Efficient white light emitting polymers were synthesized based on poly(9,9-dioctylfluorene-co-dibenzothiophene-S,S-dioxide) as blue emitter and a bisphenylamine functionalized 2,1,3-benzothiadiazole (DPABT) as red emitter. It was found that the incorporation of hole-transporting carbazole moiety into polymer main chain could effectively reduce the hole injection barriers, which can lead to distinctly improved charge balance in the emissive layer. Additionally, the hole-transporting carbazole units may form efficient bipolar host with electron-transporting dibenzothiophene-S,S-dioxide units. The white light emitting diodes based on single polymer PFSOCzDPABT showed the maximum luminous efficiency of 3.3 cd/A with the maximum luminance of 10282 cd/m2 , and the luminous efficiency showed only 24% roll off at current density of 400 mA/cm2 . These Commission Internationale d’Enclairage (CIE) coordinates of the devices changed slightly with the driving voltages increasing from 8 V to 12 V, and were very close to National Television System Committee (NTSC) standard white light emission of (0.33, 0.33). The results indicated that the incorporating bipolar host and low band gap DPABT unit was a promising way to achieve efficient single white light emitting copolymers. 相似文献
In this paper, we describe a bipolar molecular design for small molecule solution‐processed organic light emitting diodes (OLEDs). Combining the rigidity of the conjugated emissive cores and the flexibility of the peripheral alkyl‐linked carbazole groups, two series of highly efficient bipolar RGB (red, green, blue) emitters have been synthesized and characterized. The emissive cores are composed of electron‐withdrawing groups; the carbazole groups endow the materials electron‐donating units. Such bipolar structures are advantageous for the carrier injection and balance. Four peripheral carbazole groups are introduced in T‐series materials (TCDqC, TCSoC, TCBzC, TCNzC), and another four in O‐series materials (OCDqC, OCSoC, OCBzC, OCNzC). With the single‐layer device configuration of ITO/PEDOT:PSS/emitting layer/CsF/Al, two green devices exhibited excellent performance with a maximum luminescence efficiency of over 6.4 cd A?1, and a high maximum luminance of more than 6700 cd m?2. In addition, compared with the T‐series, the luminescence efficiency of blue and red devices based on O‐series materials increased from 1.6 to 2.8 cd A?1 and 0.2 to 1.3 cd A?1, respectively. To our knowledge, the performance of the blue device based on OCSoC is among the best of the blue small‐molecule solution‐processed single‐layer devices reported so far. 相似文献
A novel blue‐light emitting terphenyl‐bridged ladder polysiloxane ( TBLP) was prepared by the condensation of a tetrasilanol monomer via a ladder supramolecular structure. TBLPs emit narrow blue light (420 nm) with high quantum yields (0.96) in diluted solution and shows no evident fluorophore aggregation in the solid state, indicating that the terphenyls are well isolated due to confinement of the ladder‐rungs. In addition, it has excellent emission stability at high temperature based on TGA, DSC and annealing experiments. Overall, TBLPs can be considered as a potential material for fabricating stable and high‐efficiency blue‐light emitting optoelectronic devices.
Direct anodic oxidation of 1,2-methylenedioxybenzene (MDOB) and 1,2-ethylenedioxybenzene (EDOB), analogues of 3,4-alkylenedioxythiophene and 3,4-alkylenedioxypyrrole, led to the formation of polyacetylene derivatives, poly(1,2-methylenedioxybenzene) (PMDOB) and poly(1,2-ethylenedioxybenzene) (PEDOB), on a platinum sheet in pure boron trifluoride diethyl etherate (BFEE). IR, 1H NMR, 13C NMR and quantum chemistry calculations confirmed that the polymerization occurred at C(4) and C(5) position on the benzene ring of the monomer, making the main backbone of PMDOB and PEDOB similar to polyacetylene. Both dedoped PMDOB and PEDOB in DMSO solution showed good fluorescence properties with quantum yields of 0.13 and 0.27, emitting blue and green light under excitation of 365 nm, respectively. PMDOB showed electrochromic properties from grass green (doped) to light nacarat (dedoped). PEDOB changed it from bottle green (doped) to nacarat (dedoped). Doped PMDOB and PEDOB own electrical conductivities of 0.1 S cm−1 and 0.17 S cm−1, respectively. 相似文献
Four new iridium(III) complexes 1-4, with 1,3,4-oxadiazole derivative as cyclometalated ligand for the first time, have been synthesized and structurally characterized by NMR, EA, MS and X-ray diffraction analysis (except 1). The stronger ligand field strength of the dithiolate ancillary ligands results in higher oxidation potentials and lower HOMO energy levels of complexes than acetylacetone. The absorption spectra of these complexes display low-energy metal-to-ligand charge transfer transition ranging from 350 to 500 nm. Complexes with dithiolate ancillary ligand emit at maximum wavelengths of ca. 500 nm, blue shifting 17 and 11 nm with respect to their counterpart with acetylacetone ligand. The electrophosphorescent devices with 2-4 as phosphorescent dopant in emitting layer have been fabricated. All devices have a low turn-on voltage in the range of 4.5 and 4.9 V. A high-efficiency green emission with maximum luminous efficiency of 5.28 cd/A at current density of 1.37 mA/cm2 and a maximum brightness of 2592 cd/m2 at 15.2 V has been achieved in device using 2 as emitter. 相似文献
Novel hole-transporting materials based on carbazole dendrimers, namely G1CBC and G2CBC were synthesized and characterized. They are thermally stable with high glass transition temperatures (Tg) up to 245 °C and exhibit chemically-stable redox processes. Double-layer green OLEDs using these materials as the hole-transporting layer (HTL) with the device configuration of ITO/HTL/Alq3/LiF:Al emit brightly (λem 522-534 nm) from the Alq3 layer with a maximum luminance and low turn-on voltage of 15,890 cd/m2 and 3.0 V, respectively. Their ability as HTLs in terms of device performance is comparable to the common hole-transporter N,N′-diphenyl-N,N′-bis(1-naphthyl)-(1,1′-biphenyl)-4,4′-diamine (NPB), however their thermal properties were far greater than both NPB and N,N′-bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD). 相似文献
Stable carbazole derivatives that contain peripheral diarylamines at the 3- and 6-positions and an ethyl or aryl substituent at the 9-position of the carbazole moiety have been synthesized via palladium-catalyzed C-N bond formation. These new carbazole compounds (carbs) are amorphous with high glass transition temperatures (T(g), 120-194 degrees C) and high thermal decomposition temperatures (T(d) > 450 degrees C). The compounds are weakly to moderately luminescent in nature. The emission wavelength ranges from green to blue and is dependent on the substituent at the peripheral nitrogen atoms. Two types of light-emitting diodes were constructed from carb: (I) ITO/carb/TPBI/Mg:Ag and (II) ITO/carb/Alq(3)/Mg:Ag, where TPBI and Alq(3) are 1,3,5-tris(N-phenylbenzimidazol-2-yl)benzene and tris(8-hydroxyquinoline) aluminum, respectively. In type I devices, the carb functions as the hole-transporting as well as emitting material. In type II devices, either carb, or Alq(3) is the light-emitting material. Several green light-emitting devices exhibit exceptional maximum brightness, and the physical performance appears to be better than those of typical green light-emitting devices of the structure ITO/diamine/Alq(3)/Mg:Ag. The relation between the LUMO of the carb and the performance of the light-emitting diode is discussed. 相似文献
In this work, a new type of miniaturized fibre-coupled solid-state light source is demonstrated as an excitation source for fluorescence detection in capillary electrophoresis. It is based on a parabolically shaped micro-light emitting diode (μ-LED) array with a custom band-pass optical interference filter (IF) deposited at the back of the LED substrate. The GaN μ-LED array consisted of 270 individual μ-LED elements with a peak emission at 470 nm, each about 14 μm in diameter and operated as a single unit. Light was extracted through the transparent substrate material, and coupled to an optical fibre (OF, 400 μm in diameter, numerical aperture NA = 0.37), to form an integrated μ-LED-IF-OF light source component. This packaged μ-LED-IF-OF light source emitted approximately 225 μW of optical power at a bias current of 20 mA. The bandpass IF filter was designed to reduce undesirable LED light emissions in the wavelength range above 490 nm. Devices with and without IF were compared in terms of the optical power output, spectral characteristics as well as LOD values. While the IF consisted of only 7.5 pairs (15 layers) of SiO2/HfO2 layers, it resulted in an improvement of the baseline noise as well as the detection limit measured using fluorescein as test analyte, both by approximately one order of magnitude, with a LOD of 1 × 10−8 mol L−1 obtained under optimised conditions. The μ-LED-IF-OF light source was then demonstrated for use in capillary electrophoresis with fluorimetric detection. The limits of detection obtained by this device were compared to those obtained with a commercial fibre coupled LED device. 相似文献
A novel multifunctional 1,6-bis(2-hydroxyphenyl)pyridine boron bis(4-n-butyl-phenyl)phenyleneamine compound in which the hole-transporting (HT), electron-transporting (ET), and emitting (EM) components are integrated into a single molecule was synthesized and used as an emitting material to fabricate an efficient single-layer electroluminescent device. 相似文献
Triple-layer-type organic electroluminescent devices were fabricated using charge-transporting poly(N-vinylcarbazole) (PVK) as a hole-transporting emitter layer. Electron-transporting layers consisting of a triazole derivative (TAZ) and an aluminum complex (Alq) layer were used to maximize the carrier recombination efficiency. The EL device with a structure of glass substrate/indium-tinoxide/PVK/TAZ/AIq/Mg:Ag showed bright blue emission from the PVK layer with a luminance of over 700 cd/m2. The emission color was tuned to a desirable color in the visible region through doping the PVK layer with fluorescent dyes. Bright white emission, in particular, was obtained for the first time at a high luminance level of over 3000 cd/m2 by using three kinds of fluorescent dyes each emitting red, green or blue. 相似文献