Silica-supported perchloric acid and potassium bisulfate as reusable green catalysts for nitration of aromatics under solvent-free microwave conditions

Silica-supported perchloric acid and bisulfate (SiO₂/HClO₄ and SiO₂/KHSO₄) have been developed as reusable green catalysts for nitration of aromatic compounds using NaNO₂ in acetonitrile medium under conventional and solvent-free microwave conditions. The reaction times under microwave irradiation are significantly shorter than conventional method even though the yields obtained in microwave-assisted reactions are comparable with those obtained under reflux conditions.     

Reductive dehalogenation of halophenols in sulfite-bisulfate medium

The KHSO₄-Na₂SO₃ system is found to be simple and inexpensive for reductive elimination of halogens (Br, I) from the corresponding halophenols under reflux conditions in dry methanol. Under similar conditions the reaction is sluggish with chlorophenols.     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO(OH)₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO （OH）₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。     

A Facile and Efficient Trimethylsilylation of Hydroxyl Groups Using Silica-Supported Zinc Chloride and Alumina-Supported Sodium Hydrogensulfate as Recyclable Heterogeneous Catalysts

Silica-supported zinc chloride (SiO₂-ZnCl₂) and novel alumina-supported sodium hydrogensulfate (NaHSO₄-Al₂O₃) as recyclable heterogeneous catalysts have been used for the mild trimethylsilylation of hydroxyl groups under ambient conditions. This procedure also allows for the selective protection of primary and secondary alcohols in the presence of tertiary alcohols.     

Novel solvent-free reaction of C60 with active methylene compounds in the presence of Na2CO3 under high-speed vibration milling

Inorganic base, Na₂CO₃, was utilized to replace organic base, DBU, in the Bingel reaction employing diethyl bromomalonate under the mechanochemical ‘high-speed vibration milling’ conditions to give the cyclopropanated C₆₀1 in high yield. In contrast, reactions of C₆₀ with diethyl malonate and ethyl acetoacetate in the presence of Na₂CO₃ under HSVM conditions afforded 1,4-bisadduct 2 and dihydrofuran-fused C₆₀ derivative 3, respectively.     

Nox reduction with CO over supported Pd catalysts under simulated post Euro-IV diesel exhaust conditions

The catalytic reduction of NO_x with CO over Pd/Al₂O₃ and Pd/TiO₂/Al₂O₃ under simulated post Euro-IV diesel exhaust conditions was studied. The catalytic activities obtained by using various Pd and TiO₂ loadings and total amounts of reductant and the influence of H₂ and H₂O was investigated.     

Selective removal of anomeric O-acetate groups in carbohydrates using HClO4-SiO2

A convenient methodology has been developed for the selective removal of the anomeric acyl group of carbohydrate derivatives using HClO₄-SiO₂ under acidic reaction conditions. Anomeric benzoyl groups can also be removed selectively following similar reaction conditions. The yields were excellent in all cases.     

KHSO4 · H2O/SiO2‐Catalyzed,One‐Pot,Solvent‐Free Synthesis of Pyrazolines,Tetrahydrocarbozoles and Indoles using Microwave Irradiation

A new high‐yielding, operationally simple, solvent‐free, and mild method for preparation of pyrazolines, tetrahydrocarbazoles, and indoles has been developed using KHSO₄ · H₂O impregnated on SiO₂. The reactions have been probed under microwave irradiation (MWI), and ultrasonic and thermal conditions, employing different solid supports. The data revealed that KHSO₄ · H₂O impregnated on SiO₂ under MWI provides the best yields in a shorter time under solvent‐free reaction conditions.     

Regioselective oxidation of N-alkylpyrrolidines to pyrrolidin-5-ones by RuCl3/NaIO4

RuCl₃/NaIO₄ under EtOAc/H₂O biphasic conditions, selectively oxidizes the Nα-endo-methylene group of pyrrolidine derivatives, without affecting the exo-methylene group adjacent to the N-heteroatom.     

Acetamide/SO2Cl2 as an efficient reagent for Friedel–Craft’s acylation of aromatic compounds under ultrasonic and microwave conditions

Acetamide/SO₂Cl₂ reagent has been developed for effective Friedel–Craft’s acylation of aromatic compounds. Acylation of aromatic compounds with acetamide/SO₂Cl₂ was much more effective and faster than analogous (acetamide/SOCl₂) and (acetamide/POCl₃) reagents even under conventional conditions. However, microwave and ultrasonic assisted reactions afforded high yields of products in very short reaction times (30–40 min under sonication and 3–4 min under microwave assisted conditions).     

A direct approach to β-keto sulfones via AgNO3/K2S2O8 catalyzed aerobic oxysulfonylation of alkenes in aqueous medium

An efficient, AgNO₃/K₂S₂O₈ catalyzed one-pot radical route to β-keto sulfones from alkenes is reported. The protocol involves oxysulfonylation of alkenes with air (O₂) and inexpensive sodium arenesulfinate salts under mild conditions. It is highly practical and allows the use of easily available starting materials in an open flask and aqueous medium at ambient temperature.     

Nitric acid in the presence of P2O5 supported on silica gel—a useful reagent for nitration of aromatic compounds under solvent-free conditions

A variety of aromatic compounds are nitrated to parent nitro aromatic compounds under solvent-free conditions using 65% nitric acid in the presence of P₂O₅ supported on silica gel is described. This methodology is useful for nitration of activated and deactivated aromatic rings.     

Highly Efficient Ag3PO4/g-C3N4 Z-Scheme Photocatalyst for Its Enhanced Photocatalytic Performance in Degradation of Rhodamine B and Phenol

Ag₃PO₄/g-C₃N₄ heterojunctions, with different g-C₃N₄ dosages, were synthesized using an in situ deposition method, and the photocatalytic performance of g-C₃N₄/Ag₃PO₄ heterojunctions was studied under simulated sunlight conditions. The results revealed that Ag₃PO₄/g-C₃N₄ exhibited excellent photocatalytic degradation activity for rhodamine B (Rh B) and phenol under the same light conditions. When the dosage of g-C₃N₄ was 30%, the degradation rate of Rh B at 9 min and phenol at 30 min was found to be 99.4% and 97.3%, respectively. After five cycles of the degradation experiment for Rh B, g-C₃N₄/Ag₃PO₄ still demonstrated stable photodegradation characteristics. The significant improvement in the photocatalytic activity and stability of g-C₃N₄/Ag₃PO₄ was attributed to the rapid charge separation between g-C₃N₄ and Ag₃PO₄ during the Z-scheme charge transfer and recombination process.     

An efficient transition metal-free aziridination of alkenes with Chloramine-T using aqueous H2O2/HBr

The combination of aqueous H₂O₂ and HBr was found to be an efficient transition metal-free green catalytic system for the aziridination of a variety of alkenes under very mild reaction conditions.     

An efficient vanadium-catalyzed bromination reaction

An efficient catalytic oxidative bromination of arenes, alkenes, and alkynes in aqueous media was achieved under relatively mild conditions by using NH₄VO₃ catalyst combined with H₂O₂, HBr, and KBr. Dodecyltrimethylammonium bromide was found to serve as an efficient surfactant to facilitate the NH₄VO₃-catalyzed bromination in aqueous media.     

Thermally activated and non-activated charge transport processes in the oxides NaxMo2

The electrical properties of Na_xM_1+yO₂ (M=Mn,Co) were measured as a function of temperature under conditions of thermodynamic equilibrium for a quenched defect structure. The results of electrochemical studies of Na_xM_1+yO₂ are also presented. A correlation is demonstrated between the structures of the ionic and electronic defects in these materials and the potential changes of the cathode in Na/Na⁺/Na_xM_1+yO₂.The author is grateful to Prof. S. Mrowec and Dr. A. Stoklosa for helpful discussions.     

Nitration of Aromatic Compounds Catalyzed by Divanadium-Substituted Molybdophosphoric Acid,H<Subscript>5</Subscript>[PMo<Subscript>10</Subscript>V<Subscript>2</Subscript>O<Subscript>40</Subscript>]

Summary. The nitration of aromatic compounds was carried out in the presence of divanadium-substituted molybdophosphoric acid, H₅PMo₁₀V₂O₄₀, as catalyst and a mixture of nitric acid and acetic anhydride as nitrating agent. In the presence of this heteropolyacid the ortho- and para-nitro compounds were obtained in good to excellent yields under mild reaction conditions.     

Solid-State Synthesis of 1,3-Selenazoles Employing CuPy2Cl2 as a Lewis Acid Catalyst

1,3-Selenazoles were Synthesized from 3-bromo acetyl coumarin and selenourea in the presence of CuPy₂Cl₂ under solvent-free conditions at ambient temperature. The pure products were identified by spectral data.     

Visible-light-mediated facile synthesis of disulfides using reusable TiO2/MoS2 nanocomposite photocatalyst

A nontoxic and inexpensive TiO₂/MoS₂ nanocomposite was prepared and employed as an efficient photocatalyst for the synthesis of symmetrical disulfides under visible light irradiation at room temperature. Both aryl and alkyl thiols survived the reaction conditions, affording the corresponding disulfides in good to excellent yields. The photocatalyst could be easily recovered by simple centrifugation and filtration and reused several times without significant loss in its activity.