Oxidations by the system ‘hydrogen peroxide-[Mn2L2O3][PF6]2 (L=1,4,7-trimethyl-1,4,7-triazacyclononane)-carboxylic acid’. Part 10: Co-catalytic effect of different carboxylic acids in the oxidation of cyclohexane, cyclohexanol, and acetone

Hydrogen peroxide oxidation of cyclohexane in acetonitrile solution catalyzed by the dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (L=1,4,7-trimethyl-1,4,7-triazacyclononane, TMTACN) at 25 °C in the presence of a carboxylic acid affords cyclohexyl hydroperoxide as well as cyclohexanone and cyclohexanol. A kinetic study of the reactions with participation of three acids (acetic acid, oxalic acid, and pyrazine-2,3-dicarboxylic acid, 2,3-PDCA) led to the following general scheme. In the first stage, the catalyst precursor forms an adduct. The equilibrium constants K₁ calculated for acetic acid, oxalic acid, and 2,3-PDCA were 127±8, (7±2)×10⁴, and 1250±50 M⁻¹, respectively. The same kinetic scheme was applied for the cyclohexanol oxidation catalyzed by the complex in the presence of oxalic acid. The oxidation of cyclohexane in water solution using oxalic acid as a co-catalyst gave cyclohexanol and cyclohexanone, which were rapidly transformed into a mixture of over-oxidation products. In the oxidation of cyclohexanol to cyclohexanone, varying the concentrations of the reactants and the reaction time we were able to find optimal conditions and to obtain the cyclohexanone in 94% yield based on the starting cyclohexanol. Oxidation of acetone to acetic acid by the system containing oxalic acid was also studied.     

Highly efficient oxidation of alcohols by the system "hydrogen peroxide-[lmn(o)3mnl](pf6)2 (l = 1,4,7-trimethyl-1,4,7-triazacyclononane)-oxalic acid"

Summary The dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (1, L = 1,4,7-trimethyl-1,4,7-triazacyclononane) catalyzes the extremely efficient oxidation of alcohols with hydrogen peroxide at room temperature. Oxalic acid is an obligatory co-catalyst. The oxidation of isopropanol, for example, yields acetone with turnover numbers up to 40000 after 5-10 h in the absence of a solvent. 2-Cyanoethanol was oxidized by this system with somewhat lower efficiency (conversion 70%). The catalytically active cation from salt 1 was obtained in an insoluble form containing a heteropoly anion [Mn₂O₃(TMTACN)₂]₂[SiW₁₂O₄₀]. Oxidation of 2-cyanoethanol using this heterogenized catalyst and oxalic acid gave the oxo-products with the 54% total yield.     

Carvone epoxidation by system “hydrogen peroxide-[Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)-carboxylic acid”: a combinatorial approach to the process optimization?

Summary Epoxidation of natural terpene (+)-carvone by the system consisting of a catalyst, oxalic acid (co-catalyst) and H₂O₂ (70% aqueous solution; oxidant) was studied and factorial design methods were applied for the optimization of this reaction. A dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (L = 1,4,7-trimethyl-1,4,7-triazacyclononane) was used as a catalyst, and acetonitrile was employed as a solvent. An analysis by methods of the complete 2⁴ factorial design showed that an increase in the catalyst concentration gives a strong positive effect on the carvone conversion and selectivity. Hydrogen peroxide has a smaller positive effect on the conversion, but at high concentration, H₂O₂ leads to some decrease in the selectivity. An increase in the oxalic acid concentration has a beneficial effect on the conversion, but does not affect the selectivity.     

Oxidations by the system “hydrogen peroxide-[Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)-oxalic acid”. Part 6. Oxidation of methane and other alkanes and olefins in water

Oxidation of alkanes with hydrogen peroxide in water solution at 10-50 °C is efficiently catalyzed by the cationic dinuclear manganese (IV) derivative [Mn₂L₂O₃]²⁺ (1, with L = 1,4,7-trimethyl-1,4,7-triazacyclononane, TMTACN) in the form of the hexafluorophosphate salt ([1][PF₆]₂) if oxalic acid is present as a co-catalyst. Methane gives methanol and formaldehyde (turnover numbers, TONs, were 7 and 2, respectively, after reduction of the reaction mixture with ascorbic acid) whereas cyclohexane was oxidized with TONs up to 160 affording cyclohexyl hydroperoxide, cyclohexanone and cyclohexanol (the ketone was the main product, although at room temperature almost pure alkyl hydroperoxide was formed). In contrast to the oxidation in acetonitrile, the reaction with linear n-alkanes in water exhibits an unusual distribution of oxygenates. For example, in the oxidation of n-heptane the normalized reactivity of the methylene group in position 4 of the chain is 3-7 times higher than that of the CH₂ group in position 2. Dec-1-ene is epoxidized by hydrogen peroxide in water (a biphasic system) catalyzed by [1][PF₆]₂ and oxalic acid in the presence of a small amount of acetonitrile with TONs up to 1000 (no epoxidation has been detected in the absence of MeCN).     

Hydrocarbon oxygenation with Oxone catalyzed by complex [Mn2L2O3]2+ (L=1,4,7-trimethyl-1,4,7-triazacyclononane) and oxalic acid

Oxone (peroxysulphate) very efficiently oxidizes benzene to p-quinone (TON 1140) and alkanes to the corresponding alcohols and ketones (aldehydes) in aqueous acetonitrile 50 °C if catalytic amounts of complex [Mn₂L₂O₃]²⁺ (L=1,4,7-trimethyl-1,4,7-triazacyclononane) and oxalic acid are present in the solution. In contrast to the similar reaction with H₂O₂, the alkane oxidation with Oxone does not afford the corresponding alkyl hydroperoxides. Phenol was quantitatively oxidized to a mixture of p-quinone and pyrocatechol (9:1 ratio). Cyclohexanol gave cyclohexanone (TON 400). The proposed mechanism includes the formation of an oxidizing species containing the Mn(V)O fragment. A kinetic study demonstrated that an adduct of [Mn₂L₂O₃]²⁺ and oxalic acid is formed in the initial stage. This adduct reacts with Oxone to generate the oxidizing species.     

Direct ring functionalisation of 1,4,7-trimethyl-1,4,7-triazacyclononane and its application in the preparation of functional [L2Mn2O3]-type complexes

Treatment of 1,4,7-trimethyl-1,4,7-triazacyclononane (metacn) with N-bromosuccinimide (NBS) gave a bicyclic ammonium intermediate, which was ring-opened to 2-cyano-1,4,7-trimethyl-1,4,7-triazacyclononane by reaction with potassium cyanide. Reduction to the amine followed by reaction with anhydrides gave amides, which could subsequently be converted to dinuclear tris-μ-oxo manganese complexes.     

The molecular and electronic structure of homoaromatic compounds: cis,cis,cis-cyclonona-1,4,7-triene and 1,4,7-trioxonin; a study by photoelectron spectroscopy and ab initio molecular orbital methods

The molecular structure of 1,4,7-trioxonin (2) has been optimised by ab initio MO studies for both crown and planar forms. The crown form is energetically preferred, but there is little resonance energy in the system, which is of a classical nature. The angle between the carbon and the COC planes is very similar to that known experimentally for cyclonona-1,4,7-triene (1). The calculations show that a heavy degree of mixing of the (CC)_π levels with LP^σ_o or with (CH₂)_sym occurs. The photoelectron spectra of both the hydrocarbon (1) and the trioxonin (2) have been assigned, on the basis of comparisons with simple molecules and by the use of ab initio calculations of single and double zeta quality.     

Alkane oxidation by the H2O2-NaVO3-H2SO4 system in acetonitrile and water

A simple system is described, which oxidizes saturated hydrocarbons either in acetonitrile or (less efficiently) in water. The system consists of 50% aqueous hydrogen peroxide as an oxidant, sodium metavanadate, NaVO₃, as a catalyst and sulfuric (or oxalic) acid as a co-catalyst. The reactions were carried out at 20-50 °C. In the oxidation of cyclohexane in acetonitrile, the highest yield (37% based on cyclohexane) and turnover number (TON=1700) were attained after 3 h at 50 °C. The corresponding parameters were 16% and 1090 for n-heptane oxidation under the same conditions. The oxidation of higher alkanes, RH, in acetonitrile gives almost exclusively the corresponding alkyl hydroperoxides, ROOH. Light alkanes (n-butane, propane, ethane, and methane) have been also oxygenated by the system under consideration. The highest TON (200) was attained for ethane and the highest yield (19%) was obtained in the case of n-butane. The selectivity parameters measured for the oxidation of linear and branched alkanes are low, the reaction with cis- and trans-1,2-dimethylcyclohexanes is not stereoselective. These facts lead us to conclude that the oxidation occurs with the formation of hydroxyl radicals in the crucial step.     

[(R)-2-Methyl-1,4,7-triazacyclononane] [1,1,1-tris(aminomethyl)ethane]-cobalt(III) and some Mono[(R)-2-methyl-1,4,7-triazacyclononane]-cobalt(III) Complexes

Summary [(R)-2-Methyl-1,4,7-triazacyclononane][1,1,1-tris(aminomethyl)ethane]cobalt(III) has been prepared and separated into two isomers which show weak Cotton effects in the¹A₁¹T₁ region (d-electron transition) compared with that of bis[(R)-2-methyl-1,4,7-triazacyclononane]cobalt(III). The effect is comparable to that of tetraammine[(R)-1,2-diamino propane]cobalt(III). The circular dichroism spectra of the mono complex change markedly upon addition of sodium sulphate. The chelate rings are more flexible in the mono than in the bis complex. Some other related mono[(R)-2-methyl 1,4,7-triazacyclononane]cobalt(III) and [(R)-2-methyl-1,4,7 triazacyclononane][1,1,1-tris(aminomethyl)ethaneI nickel (II) complexes have also been prepared and characterized.     

1-亚甲基苯并咪唑-1,4,7-三氮环壬烷配体及其铜配合物[Cu(C14H21N5)Br]2•[CuBr4]的合成与晶体结构

采用新的方法合成了1-亚甲基苯并咪唑-1,4,7-三氮环壬烷配体, 利用该配体合成了一个新的铜配合物[Cu(C₁₄H₂₁N₅)Br]₂•[CuBr₄] ([Cu(C₁₄H₂₁N₅)Br]^＋•[CuBr₄]^2－•[Cu(C₁₄H₂₁N₅)Br]^＋), 并测定了它的晶体结构, 结果表明: 该配合物的晶体属于单斜晶系的C2/c空间群, 晶胞参数a＝1.96209(15) nm, b＝0.82319(5) nm, c＝2.39249(15) nm, α＝90.00°, β＝102.996(2)°, γ＝90.00°, V＝3.7653(4) nm³, Z＝4, μ(Mo Kα)＝8.083 mm^－1, D_c＝2.097 Mg/m³, F(000)＝2308, R＝0.0417, wR＝0.0945, GOF＝0.933. 该配合物由两个1-亚甲基苯并咪唑-1,4,7-三氮环壬烷一溴合铜配阳离子和一个四溴合铜配阴离子组成. 在两个配阳离子中, 每个Cu(II)离子与五个配位原子配位(四个氮原子和一个溴阴离子), 位于一个变形四方锥的中心. 在配阴离子中, Cu(II)离子与四个溴阴离子配位, 位于一个稍变形四面体的中心.     

Photo-depositing Ru and RuO2 on Anatase TiO2 Nanosheets as Co-catalysts for Photocatalytic O2 Evolution from Water Oxidation

TiO₂ nanosheets mainly exposed (001) facet were prepared through a hydrothermal process with HF as the morphology-directing agent. Ru and RuO₂ species were loaded by photo-deposition methods to prepare the photocatalysts. The structural features of the catalysts were characterized by X-ray di raction, transmission electron microscopy, inductively cou-pled plasma atomic emission spectrum, and H₂ Temperature-programmed reduction. The photocatalytic property was studied by the O₂ evolution from water oxidation, which was examined with respect to the in uences of Ru contents as well as the oxidation and reduction treatments, suggesting the charge separation effect of the Ru species co-catalysts on di erent facets of TiO₂ nanosheets. In contrast to Ru/TiO₂ and RuO₂/TiO₂ with the single deposited co-catalyst, the optimized catalyst 0.5%Ru-1.0%RuO₂/TiO₂ with dual co-catalysts achieved a much improved catalytic performance, in terms of the synergetic effect of dual co-catalysts and the enhanced charge separation effect.     

Facile oxygenation of organic sulfides with H2O2 catalyzed by Mn-Me3TACN compounds

Two binuclear Mn-Me₃TACN (Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane) compounds catalyze the oxygenation of organic sulfides utilizing H₂O₂ under ambient conditions. Both phenyl sulfide and ethyl phenyl sulfide were converted to the corresponding sulfones and chloroethyl phenyl sulfide proceeds to its elimination product of phenyl vinyl sulfone.     

Pulse radiolysis of pyridinecarboxylic acids in aqueous solution

The reactivity of OH, e^-_aq and H radicals towards aqueous carboxypyridines: picolinic acid (2-pyridinecarboxylic acid), PA; isonicotinic acid (4-pyridinecarboxylic acid), i-NA; 2,6-pyridinedicarboxylic acid, 2,6-PDCA; and 3,5-pyridinedicarboxylic acid, 3,5-PDCA was investigated in the pH-range 1–13.8. The absorption spectra of the OH-adducts, H-adducts and pyridinyl radicals are given as well as the formation and decay kinetics. In acid (but not in alkaline) solution, the reaction of H-atoms leads to the formation of two distinct products, namely H-adduct and pyridinyl radicals. The yields of pyridinyl radical are: 20% for PA, 75% for i-NA, 60% for 2,6-PDCA and 25% for 3,5-PDCA (a yield of 50% has been found earlier for nicotinic acid, NA).     

Formation and reaction of O=MnV species in the oxidation of phenolic substrates with H2O2 catalysed by the dinuclear manganese(IV) 1,4,7-trimethyl-1,4,7-triazacyclononane complex [MnIV2(mu-O)3(TMTACN)2](PF6)2

The oxidation of phenolic substrates with H2O2 catalysed by [MnIV2(mu-O)3(TMTACN)2](PF6)2 1, (TMTACN, 1,4,7-trimethyl-1,4,7-triazacyclononane) has been investigated by use of ESI mass spectrometry. The role of the phenols as one-electron reductants and as co-ligands in the stabilisation and reaction of an intermediate O=MnV species has been analysed and the presence of a variety of manganese species in solution has been explained. Our results lead to a proposed mechanism for the catalytic oxidation of phenols in this system.     

X-ray structure characterization of palladium(II) ternary complexes of pyridinedicarboxylic and phthalic acid with phenanthroline and bipyridine

The crystal structures of the series of four ternary complexes, [Pd(phen)(2,6-PDCA)].4H(2)O (1) (phen=1,10-phenanthroline; 2,6-PDCA=2,6-pyridinedicarboxylic acid), [Pd(bpy)(2,3-PDCA)].3H(2)O (2) (bpy=2,2'-bipyridineand; 2,3-PDCA=2,3-pyridinedicarboxylic acid) and [Pd(phen)(PHT)].2.5H(2)O (3) (PHT=o-phthalic acid ) and [Pd(bpy)(PHT)].1.5H(2)O (4), are determined and the coordination modes of palladium(II) ternary complexes are characterized. All complexes take the mononuclear Pd(II) complexes, in which central Pd(II) atom of each complex has a similar distorted square-planar four coordination geometry. In all complexes, the aromatic heterocyclic compounds, phen and bpy, behave as a bidentate N, N' ligand. In the complex 1 and 2, 2,6-PDCA and 2,3-PDCA behave as a bidentate N, O ligand, and in complex 3 and 4, PHT behaves as a bidentate O, O' ligand.     

Structures and optical and electrochemical properties of the Pt(II) and Pd(II) complexes with cyclometallated 2-phenylbenzothiazole and 1,4,7-trithiocyclononane

The distorted square pyramidal structures of the Pt(II) and Pd(II) complexes with cyclometallated 2-phenylbenzothiazole and flexible 1,4,7-trithiocyclononane are shown by X-ray diffraction analysis, IR spectroscopy, and ¹Н, ¹³С{¹H{, and ¹⁹⁵Pt NMR spectroscopy. The axial interaction of the d _Z2 orbital of Pt(II) and Pd(II) with the S atom of 1,4,7-trithiocyclononane results in the temperature quenching of the intraligand phosphorescence of the cyclometallated complexes in a solution and the one-electron ligand- and metal-centered reduction and oxidation of the complexes with the formation of the relatively stable Pd(III) complex (CIF file CCDC no. 1483011).     

Nickel(II) complex with 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane

A nickel(II) complex, [Ni(taetacn)](ClO₄)₂ ? H₂O, where taetacn = 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane was synthesized. The crystal structure was determined by the single-crystal X-ray diffraction method at 293 K. The complex crystallizes in the orthorhombic space group Pna2₁ with a = 16.004(2) Å, b = 10.186(1) Å, c = 13.937(2) Å, V = 2271.9(5) ų, D_x = 1.56 g cm^?3, D_m = 1.59 g cm^?3 (floatation method), and Z = 4. The R₁ [I > 2σ(I)] and wR₂ (all data) values are 0.0636 and 0.1672, respectively, for all 4845 independent reflections. The compound is composed of octahedral nickel(II) cation with three 2-aminoethyl pendant groups of taetacn, tetrahedral ClO ₄ ^? anion, and a water molecule of crystallization. Electronic spectra are consistent with the octahedral geometry. Temperature dependence of the magnetic susceptibility (4.5–300 K) can be interpreted considering the zero-field splitting of the nickel(II) ion (g = 2.14, D = 3.72 cm^?1, and Nα = 300 × 10^?6 cm³ mol^?1). Cyclic voltammetry in DMF showed quasi-reversible and irreversible oxidation waves (E_pa = 0.54 V, E_pc = 0.45 V; E_pa = 1.16 V, E_pc = 0.71 V vs. Ag/Ag⁺).     

Pd(OAc)2/M(NO3)n (M = Cu(II), Fe(III); n = 2, 3): Kinetic investigations of an alternative Wacker system for the oxidation of natural olefins

Pd-catalyzed oxidative coupling of camphene by dioxygen afforded mainly a diene, which subsequently underwent oxidation to a ring-expanded β,γ-unsaturated ketone with LiNO₃ as reoxidant. However, the instability of LiNO₃ results to the decomposition of NO₃⁻ ions which subsequently deactivates the catalyst. The present investigation describes the oxidation of terpenes catalyzed by Pd(OAc)₂/M(NO₃)_n (M = Cu(II), Fe(III); n = 2 or 3), using dioxygen as final oxidant. Fe(III) and Cu(II) effectively stabilize the nitrate reoxidant as determined by the significant increase of both catalytic activity and stability of the system. Turnover frequency suggests that Fe(III) is the most efficient co-catalyst. Moreover, it is established that the co-catalysts NO₃⁻, Cu(II) and especially Fe(III) ions, change the product distribution (diene/ketone) remarkably. Their involvement in the rate-determining step was investigated and the results of the kinetic investigations clarified important aspects of Pd(II)-catalyzed oxidation reactions. The described protocol offers an alternative to the traditional Wacker system which uses CuCl₂ as co-catalyst and is not effective in promoting the oxidation of bicycle olefins.     

Osmium-catalyzed dihydroxylation of alkenes by H2O2 in room temperature ionic liquid co-catalyzed by VO(acac)2 or MeReO3

Room temperature ionic liquid [bmim]PF₆ was used to immobilize a bimetallic catalytic system for H₂O₂-based dihydroxylation of alkenes. Osmium tetroxide was used as the substrate-selective catalyst with either VO(acac)₂ or MeReO₃ as co-catalyst. The latter serve as an electron transfer mediator (ETM) and activates H₂O₂. For an increased efficiency N-methylmorpholine is required as an additional ETM in most cases. A range of alkenes were dihydroxylated using this robust bimetallic system and it was demonstrated that for some of the alkenes the catalytic system can be recycled and used up to five times.     

Ruthenium complexes of 1,4,7-trimethyl-1,4,7-triazacyclononane for atom and group transfer reactions

With support by macrocyclic tertiary amine ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (Me₃tacn), a number of mononuclear metal–ligand multiple bonded complexes have been isolated. Starting with a brief summary of these complexes, the present review focuses on ruthenium-oxo and -imido complexes of Me₃tacn. A family of monooxoruthenium(IV) complexes [Ru^IV(Me₃tacn)O(N–N)]²⁺ (N–N = 2,2′-bipyridines) and a cis-dioxoruthenium(VI) complex cis-[Ru^VI(Me₃tacn)O₂(CF₃CO₂)]⁺ have been isolated, and the structures of [Ru^IV(Me₃tacn)O(bpy)](ClO₄)₂ (bpy = 2,2′-bipyridine) and cis-[Ru^VI(Me₃tacn)O₂(CF₃CO₂)]ClO₄ have been determined by X-ray crystallography. Oxidation of [Ru^III(Me₃tacn)(NHTs)₂(OH)] (Ts = p-toluenesulfonyl) with Ag⁺ and electrochemical oxidation of [Ru^III(Me₃tacn)(H₂L)](ClO₄)₂ (H₃L = α-(1-amino-1-methylethyl)-2-pyridinemethanol) are likely to generate ruthenium-imido complexes supported by Me₃tacn. DFT calculations on cis-[Ru^VI(Me₃tacn)O₂(CF₃CO₂)]⁺ and proposed ruthenium-imido complexes have been performed. Complexes [Ru^IV(Me₃tacn)O(N–N)]²⁺ are reactive toward alkene epoxidation, and cis-[Ru^VI(Me₃tacn)O₂(CF₃CO₂)]⁺ efficiently oxidizes various organic substrates including concerted [3+2] cycloaddition reactions with alkynes and alkenes to selectively afford α,β-diketones, cis-diols, or CC bond cleavage products. Related oxidation reactions catalyzed by ruthenium Me₃tacn complexes include epoxidation of alkenes, cis-dihydroxylation of alkenes, oxidation of alkanes, alcohols, aldehydes, and arenes, and oxidative cleavage of CC, CC, and C–C bonds, all of which exhibit high selectivity. Ruthenium Me₃tacn complexes are also active catalysts for amination of saturated C–H bonds.