氧化腈与丙炔1,3-偶极环加成反应中区域选择性的理论研究

用密度泛函(DFT)B3LYP/6-311＋＋G**方法研究了氧化腈(RCNO, R＝F, NO₂, OCH₃, OH, COOCH₃, CHO, CONH₂, H, CH₃)与丙炔的1,3-偶极环加成反应, 并且计算了不同温度下的反应速率常数, 讨论了氧化腈上不同取代基R的取代效应和温度对反应区域选择性的影响. 结果显示, 氧化腈与富电子亲偶极体——炔烃反应, 5-取代反应占优势; 氧化腈上取代基R为强吸电子基团时或在较高温度下, 有利于4-取代反应的进行.     

Reactivity and regioselectivity in the synthesis of spiroindoles via indole o-quinodimethanes. An experimental and computational study

The 1,3-dipolar cycloaddition reactions of stable nitrile oxides with indole o-quinodimethanes have been examined. In all cases the ‘exo-anti’ addition products, dispiroisoxazolines, were isolated in moderate to good yields (25-47%). In addition, from the reaction of one of the indole quinodimethanes with mesitonitrile oxide the ‘exo-syn’ addition product was isolated in 7% yield along with the remarkable indole quinodimethane dimerization and cycloaddition product, which was isolated in 13% yield. An analogous dimerization and cycloaddition product was isolated in 18% yield from the reaction of the N-acetyl-indole quinodimethane with mesitonitrile oxide. In the case of the reaction of the N-benzoylindole quinodimethane with the 2,6-dichlorobenzonitrile oxide an oxime was also isolated in 13% yield. The proposed reaction mechanism is supported by semiempirical (AM1) MO calculations via FMO interactions. The observed selectivity was explained by an investigation of the transition states carried out also for analogous dispiroisoxazolines.     

Phenylsulfonyl as a directing group for nitrile oxide cycloadditions and mCPBA epoxidations

An unexpected selectivity trend in the nitrile oxide cycloaddition and epoxidation reactions of 4,4-disubstituted cyclopentenes is reported. A variety of facially distinct, ‘X-’ and ‘Y-substituted’ cyclopentenes were investigated.     

Polymer-supported thiobenzophenone: a self-indicating traceless ‘catch and release’ linker for the synthesis of isothiocyanates

The use of a thiobenzophenone as a self-indicating linker in the polymer-supported synthesis of isothiocyanates via a traceless ‘catch and release’ strategy is reported. Isothiocyanates were furnished via 1,3-dipolar cycloaddition of nitrile oxides with the polymer-supported thiobenzophenone linker, followed by Lewis acid-assisted fragmentation of the resulting polymer-supported oxathiazole.     

A Luminescent Zinc(II) Coordination Polymer for Selective Detection of Fe3+ and Cr2O72− in Water and Catalytic CO2 Fixation

Fluorescence-based detection technique using coordination polymer has been considered an attractive alternative over conventional approaches. Herein, a new luminescent zinc(II) coordination polymer, [Zn(4-ABPT)(NIPA)(H₂O)], SSICG-5 , is synthesized by using a Lewis acidic Zn(II) ion, aromatic nitro group containing ligand 5-nitroisophthalic acid (H₂NIPA), and basic −NH₂ rich ligand 3,5-di(pyridine-4-yl)-4H-1,2,4-triazol-4-amine (4-ABPT). SSICG-5 can detect Fe³⁺ and Cr₂O₇²⁻ selectively with a LOD of 0.16 μM and 1.94 μM, respectively. Additionally, carbon dioxide (CO₂) fixation via one-pot CO₂ cycloaddition reaction has significant importance for reduced waste formation, minimizing reaction time and lowering chemical usage. Zn metal centre of SSICG-5 possesses a replaceable coordinated water molecule. The active metal sites combined with the Lewis acidic and basic sites of the ligands make SSICG-5 an ideal bifunctional heterogeneous catalyst for efficient CO₂ cycloaddition reaction under room temperature (RT), solvent-free conditions. Notably, SSICG-5 exhibits near quantitative conversion (turnover number (TON) of 198) of propylene oxide to its carbonate compound under mild reaction conditions.     

Chiral ruthenium Lewis acid-catalyzed nitrile oxide cycloadditions

The synthesis of the chiral ligand (R,R)-BIPHOP-F is detailed. Its coordination to a cationic cyclopentadienyl ruthenium fragment generates [Ru (acetone)(R,R)-BIPHOP-F)Cp][SbF₆], a transition metal Lewis acid that catalyzes the [3+2] dipolar cycloaddition reaction between aryl nitrile oxides and α,β-unsaturated aldehydes to give chiral 2-isoxazolines with yields of 43-98% and asymmetric purity of 60-93% ee. The stereochemistry of the major enantiomer is S, consistent with an approach of the nitrile oxide to the C_α-Si face of the enal in the anti-s-trans conformation in the catalyst site.     

Inverse electron-demand 1,3-dipolar cycloaddition of nitrile oxide with common nitriles leading to 3-functionalized 1,2,4-oxadiazoles

A carbamoyl-substituted nitrile oxide was generated upon treatment of easily available 2-methyl-4-nitro-3-isoxazolin-5(2H)-one with THF (not dried); the reaction proceeded efficiently even in the absence of any special reagents and reaction conditions. The nitrile oxide caused 1,3-dipolar cycloaddition with common aliphatic nitriles or electron-rich aromatic nitriles to afford 3-functionalized 1,2,4-oxadiazoles, which are expected to serve as precursors for the preparation of a variety of functional materials by the chemical transformation of the carbamoyl group. While conventional preparative methods for 1,2,4-oxadiazoles involve the cycloaddition of an electron-rich nitrile oxide with an electron-deficient nitrile or a nitrile activated by a Lewis acid, our method employs the complementary combination of an electron-rich nitrile and an electron-deficient nitrile oxide- the inverse electron-demand 1,3-cycloaddition. The DFT calculations using B3LYP 6-31G* supported the abovementioned inverse reactivity, and also suggested the presence of an accelerating effect by the carbamoyl group as a result of hydrogen bond formation with a dipolarophilic nitrile.     

Efficient catalytic effects of Lewis acids in the 1,3-dipolar cycloaddition reactions of carbonyl ylides with imines

[reactions: see text] 1,3-Dipolar cycloaddition reactions between imines and carbonyl ylides generated by tandem intramolecular carbenoid-carbonyl cyclizations were found to be effectively catalyzed by Lewis acids (10 mol %). The Rh2(OAc)4-catalyzed reactions of o-(methoxycarbonyl)-alpha-diazoacetophenone with imines such as N-[2-(benzyloxy)benzylidene]aniline in the absence of Lewis acid gave no 1,3-dipolar cycloaddition products, but rather the dimeric product of the corresponding carbonyl ylide. In contrast, in the presence of Lewis acids such as Yb(OTf)3, the 1,3-dipolar cycloaddition reactions of the corresponding 1-methoxy-2-benzopyrylium-4-olate proceeded smoothly with several imines, giving in most cases exo-selectivity and no formation of the dimeric product. When Yb(OTf)3 was used as a Lewis acid catalyst, a fundamental catalytic effect was also observed in the cycloaddition reactions of imines with carbonyl ylides generated from 1-diazo-5-phenyl-2,5-pentanedione, 1-diazo-2,5-hexanedione and diazomethyl 2,3,4,5-tetrachloro-6-methoxycarbonylphenly ketone. This efficient catalytic effect can be satisfactorily explained in terms of energetics of the cycloaddition in the absence and the presence of Lewis acid by calculations using the ONIOM (B3LYP/6-31G(d):PM3) method.     

Lewis Acid catalyzed dipolar cycloadditions of an activated imidate

An evaluation of simple Lewis acids revealed that N-malonylimidates undergo catalyzed [3+2] cycloaddition reactions with aldehydes, imines, and activated olefins to form oxazolines, imidazolines, and pyrrolines, respectively. Reactions proceed optimally at ambient temperature with the addition of 5 mol % of MgCl(2) in CH(3)CN. Experiments aimed at elucidation of the reactive intermediate undergoing cycloaddition suggest that the Lewis acid promotes a 1,2-prototropic shift to give a metal-coordinated azomethine ylide, rather than ionization and proton transfer to give a nitrile ylide.     

Theoretical study of the [2+3] cycloaddition of nitrones to nitriles-influence of nitrile substituent,solvent and Lewis acid coordination

The [2+3] cycloaddition of nitrone PhCHdoublebondN(Me)O to nitriles RCtriplebondN (R=Me, Ph, CF(3)) was studied using quantum chemical calculations at the HF/6-31G* and B3LYP/6-31G* level of theory. With MeCN and PhCN, the reaction occurs through a concerted mechanism and leads selectively to Delta(4)-1,2,4-oxadiazolines rather than Delta(2)-1,2,5-oxadiazolines. Electron withdrawing substituents such as CF(3) at the nitrile provoke a non-synchronous bond formation, with the C-O bond being established on an earlier stage than the C-N bond. Additionally, the reaction becomes thermodynamically and kinetically more favourable. In the reaction of adducts of MeCN with BH(3) or BF(3) as model Lewis acids, the mechanism was found to change from fully concerted in the case of free MeCN towards a two-step reaction in the presence of BF(3), in which C-O bond formation occurs first. The BH(3)-mediated reaction occupies an intermediate stage where ring formation occurs in one-step but non-simultaneously, similar to the reaction of CF(3)CN. Interaction of the Lewis acid with the nitrile in the course of the reaction facilitates the cycloaddition by stabilizing transition states, intermediate and product rather than by activating the nitrile. The solvent influences the organic reaction mainly by lowering the energy of the reagents, thus leading to a higher activation barrier in a more polar solvent. In the Lewis acid mediated reaction, in contrast, the intermediate is strongly stabilised by a polar solvent and with that the synchronicity of the reaction changes in favour of a two-step mechanism.     

Study of the Cycloaddition of CO2 with Styrene Oxide Over Six-Connected spn Topology MOFs (Zr,Hf) at Room Temperature

A series of MOFs with a 6-connected spn topology were synthesized (MOF-808-(Zr, Hf), PCN-777-(Zr, Hf), MOF-818-(Zr, Hf)). Through the in situ DRIFTS of NH₃ adsorption-desorption, we found that the activated catalyst mainly contains Lewis acid sites. The effects of different organic ligands on the Lewis acid of the Zr₆ cluster were analyzed by XPS and NH₃-TPD, and the relative Lewis acidity of the same metal was obtained: PCN-777>MOF-808>MOF-818. In the Py-FTIR results, we confirmed that MOF-818 has a higher acid site density. In the activity test, MOFs with mesoporous structure showed better catalytic activity under normal temperature and pressure. Among them, MOF-818 can still maintain a high degree of crystallinity after catalysis. Finally, we use density functional theory to propose the mechanism of the cycloaddition reaction of carbon dioxide and styrene oxide. The results show that the metal is coordinated with styrene oxide and halogens attack the β carbon of the epoxide.     

Computational design of S‐nitrosothiol “click” reactions

To address a long‐standing problem of finding efficient reactions for chemical labeling of protein‐based S‐nitrosothiols (RSNOs), we computationally explored hitherto unknown (3+2) cycloaddition RSNO reactions with alkynes and alkenes. Nonactivated RSNO cycloaddition reactions have high activation enthalpy (>20 kcal/mol at the CBS‐QB3 level) and compete with alternative S—N bond insertion pathway. However, the (3+2) cycloaddition reaction barriers can be dramatically lowered by coordination of a Lewis acid to the N atom of the —SNO group. To exploit this effect, we propose to use reagents with Lewis acid and a strain‐activated carbon–carbon multiple bond linked by a rigid scaffold, which can react with RSNOs with small activation enthalpies (～5 kcal/mol) and high reaction exothermicities (～40 kcal/mol). The proposed efficient RSNO cycloaddition reactions can be used for future development of practical RSNO labeling reactions. © 2013 Wiley Periodicals, Inc.     

Endo-selective Diels-Alder reaction of methacrylonitrile: application to the synthesis of Georgywood

Diels-Alder reactions of alkyl-substituted dienes with acrylonitriles give good yields and endo-selectivities if catalyzed by (organo)aluminum, (organo)boron or gallium halides. The activity of these group IIIa Lewis acids in this reaction correlates with the coordination strength of their nitrile complexes, which deactivate Lewis acids sufficiently, so that the subsequently added diene partner undergoes the Diels-Alder reaction without serious side-reactions. Boron trichloride is the most effective catalyst for this purpose. This method gives the best endo/exo-ratios reported so far for these components and was applied in the selective synthesis of the olfactory vector of Georgywood^®.     

1,3-偶极环加成反应修饰卟啉化合物

利用1,3-偶极环加成反应对卟啉大环进行修饰是近年来卟啉研究的一个新热点。环加成产物因在可见光谱长波段范围的特征吸收,在构筑人工光反应体系和用作光动力疗法中的光敏剂等领域有重要应用价值。本文综述了1,3-偶极环加成反应在修饰卟啉化合物方面的研究进展,包括：卟啉作为亲偶极体能与甲亚胺叶立德、硝酮、重氮烷、羰基叶立德、腈氧化物等1,3-偶极子反应生成各种新型杂环稠合卟吩类化合物;卟啉化合物作为1,3-偶极子能与C₆₀等亲偶极体反应,生成β位取代的各种新型卟啉化合物;以及扩展卟啉也可以作为亲偶极体与甲亚胺偶极子发生1,3-偶极环加成反应等。     

Investigation of Lewis Acid versus Lewis Base Catalysis in Asymmetric Cyanohydrin Synthesis

The asymmetric addition of trimethylsilyl cyanide to aldehydes can be catalysed by Lewis acids and/or Lewis bases, which activate the aldehyde and trimethylsilyl cyanide, respectively. It is not always apparent from the structure of the catalyst whether Lewis acid or Lewis base catalysis predominates. To investigate this in the context of using salen complexes of titanium, vanadium and aluminium as catalysts, a Hammett analysis of asymmetric cyanohydrin synthesis was undertaken. When Lewis acid catalysis is dominant, a significantly positive reaction constant is observed, whereas reactions dominated by Lewis base catalysis give much smaller reaction constants. [{Ti(salen)O}₂] was found to show the highest degree of Lewis acid catalysis, whereas two [VO(salen)X] (X=EtOSO₃ or NCS) complexes both displayed lower degrees of Lewis acid catalysis. In the case of reactions catalysed by [{Al(salen)}₂O] and triphenylphosphine oxide, a non‐linear Hammett plot was observed, which is indicative of a change in mechanism with increasing Lewis base catalysis as the carbonyl compound becomes more electron‐deficient. These results suggested that the aluminium complex/triphenylphosphine oxide catalyst system should also catalyse the asymmetric addition of trimethylsilyl cyanide to ketones and this was found to be the case.     

Alkylaluminum halides : Lewis acid catalysts which are brønsted bases

Alkylaluminum halides react with Brønsted acids to liberate an alkane and generate a new Lewis acid. Using these reagents, Lewis acid catalyzed reactions can be run under aprotic conditions, even when acidic protons are produced in the reaction. The use of these reagents for Lewis acid catalyzed ene, Diels-Alder and cycloaddition reactions and Claisen rearrangements is described. These reagents are also useful initiators for cation-olefin addition reactions. In some cases the alkyl groups react as nucleophiles. While this is often undesirable, addition of an alkyl group to carbenium ion intermediates provides novel classes of compounds.     

Stereoselective preparation of 1,2,4-oxadiazole derivatives substituted by pentafluorophenyl by 1,3-dipolar cycloaddition reaction

1,3-Dipolar cycloaddition reactions of chiral imines obtained from optically active amino acids with nitrile oxides afforded 1,2,4-oxadiazole derivatives in moderate to good yields with good stereoselectivity. Investigation on the effect of bases suggested that triethylamine was prone to afford better stereoselectivity, while NaHCO₃ was prone to increase the reaction rates and yields.     

Asymmetric Brønsted Base Catalyzed and Directed [3+2] Cycloaddition of 2‐Acyl Cycloheptatrienes with Azomethine Ylides

Conjugated cyclic trienes have the potential for different types of cycloaddition reactions. In the present work, we will, in a novel asymmetric cycloaddition reaction, demonstrate that the organocatalytic reaction of 2‐acyl cycloheptatrienes with azomethine ylides proceeds as a [3+2] cycloaddition, which is in contrast to the Lewis acid‐catalyzed reaction, in which a [3+6] cycloaddition takes place. In the presence of a chiral organosuperbase, 2‐acyl cycloheptatrienes react in a highly enantioselective manner in the [3+2] cycloaddition with azomethine ylides, providing the 1,3‐dipolar cycloaddition product in high yields and up to 99 % ee. It is also shown that the diene formed by the reaction can undergo stereoselective dihydroxylation, bromination, and cycloaddition reactions. Finally, based on experimental observations, some mechanistic considerations are discussed.     

The intramolecular nitrile oxide cycloaddition (INOC) route to the ergot alkaloids: Use of the isoxazoline to γ-amino alcohol conversion in the total synthesis of (+)-paliclavine

A total synthesis of the ergot alkaloid paliclavine ($\text{20}$), in optically active form is described. The synthesis scheme is based on the intramolecular dipolar cycloaddition reaction of a nitrile oxide to a neighboring olefinic appendage bearing an allylic asymmetric center. The extent of diastereofacial selection in the intramolecular nitrile oxide cycloaddition (INOC) reaction was found to be marginal. A single-crystal X-ray analysis has established the complete stereostructure of the isoxazoline $\text{15}$ prepared from the “major” INOC product. The dependence of the reduction stereochemistry of the isoxazolinium salt $\text{15a}$ on the nature of the reducing agent is discussed.     

Cycloaddition reaction of phosphonyl nitrile oxides to phosphaacetylene and alkene

Here, we report the cycloaddition reaction of phosphonyl nitrile oxides and the formation of an unexpected 2:1 cycloaddition product. It provides a direct route to triphosphonyl‐substituted dihydroisoxazolyl dihydroisoxazoles and diphosphonyl‐substituted dihydroisoxazolyl dihydroisoxazoles with excellent levels of regiocontrol product. Density functional theory studies of the reactions between nitrile oxides and acrylonitrile are used to propose a possible reaction mechanism. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:95–100, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20518