Kinetics of esterification of the levulinic acid with n-hexanol,n-octanol,and n-decanol in the presence of dodecatungstophosphoric acid as a catalyst

Levulinic acid was esterified with n-hexanol, n-octanol, and n-decanol at 393–413 K and at molar ratios of between 3:1 and 10:1 (alcohol: acid) in the presence of the dodecatungstophosphoric acid (H₃PW₁₂O₄₀) as catalyst (0.1 wt%) to study the reaction kinetics. The results of such study are the precise form of kinetic equation, which is indispensable in design and optimization of industrial-scale chemical reactors. The authors stated that reactions were of second order and that the activation energy (E) decreased from 66 to 53 kJ/mol in the following alcohol sequence: n-hexanol > n-octanol > n-decanol.     

Kinetics,mass transfer,and thermodynamic and statistical modeling study for esterification of valeric acid with n‐butanol: Homogeneous and heterogeneous catalysis

The esterification of valeric acid with n‐butanol was studied with homogeneous and heterogeneous catalysts. The activity and performance of homogeneous p‐toluenesulfonic acid and heterogeneous cation exchange resin catalysts Amberlyst 36, Indion 190, and Amberlite IRC‐50 were evaluated. The pseudo‐homogeneous kinetic model was used to investigate the kinetic parameters of homogeneous‐ and heterogeneous‐catalyzed esterification. The UNIFAC (universal functional activity coefficient) approach was used to study the nonideality of the esterification reaction. The reaction was statistically modeled and optimized by the application of response surface methodology. The effects of independent variables such as reaction temperature, initial molar ratio, and catalyst loading on the conversion of valeric acid were investigated. The optimized conditions for the esterification reaction catalyzed by Amberlyst‐36 were found as temperature 360.4 K, initial molar ratio 3.8, and catalyst loading 6.7 wt%. The predicted conversion (89%) at these optimized conditions is in good agreement with the experimental conversion (87.3 ± 1.6%).     

HPLC quantification of 5‐hydroxyeicosatetraenoic acid in human lung cancer tissues

A simple and cost‐effective HPLC method was established for quantification of 5‐hydroxyeicosatetraenoic acid (5‐HETE) in human lung cancer tissues. 5‐HETE from 27 patients' lung cancer tissues were extracted by solid‐phase extraction and analyzed on a Waters Symmetry C₁₈ column (4.6 × 250 mm, 5 µm) with a mobile phase consisting of methanol, 10 mm ammonium acetate, and 1 m acetic acid (70:30:0.1, v:v:v) at a flow rate of 1.0 mL/min. The UV detection wavelength was set at 240 nm. The calibration curve was linear within the concentration range from 10 to 1000 ng/mL (r² > 0.999, n = 7), the limit of detection was 1.0 ng/mL and the limit of quantitation was 10.0 ng/mL for a 100 µL injection. The relative error (%) for intra‐day accuracy was from 93.14 to 112.50% and the RSD (%) for intra‐day precision was from 0.21 to 2.60% over the concentration range 10–1000 ng/mL. By applying this method, amounts of 5‐HETE were quantitated in human lung cancer tissues from 27 human subjects. The established HPLC method was validated to be a simple, reliable and cost‐effective procedure that can be applied to conduct translational characterization of 5‐HETE in human lung cancer tissues. Copyright © 2009 John Wiley & Sons, Ltd.     

Simultaneous analysis of ten low‐molecular‐mass organic acids in the tricarboxylic acid cycle and photorespiration pathway in Thalassiosira pseudonana at different growth stages

A method using high‐performance liquid chromatography coupled with tandem mass spectrometry was developed for the simultaneous determination of organic acids in microalgae. o‐Benzylhydroxylamine was used to derivatize the analytes, and stable isotope‐labeled compounds were used as internal standards for precise quantification. The proposed method was evaluated in terms of linearity, recovery, matrix effect, sensitivity, and precision. Linear calibration curves with correlation coefficients >0.99 were obtained over the concentration range of 0.4–40 ng/mL for glycolic acid, 0.1–10 ng/mL for malic acid and oxaloacetic acid, 0.02–2 ng/mL for succinic acid and glyoxylic acid, 4–400 ng/mL for fumaric acid, 20–2000 ng/mL for isocitric acid, 2–200 ng mL⁻¹ for citric acid, 100–10000 ng mL⁻¹ for cis‐aconitic acid, and 1–100 ng mL⁻¹ for α‐ketoglutaric acid. Analyte recoveries were between 80.2 and 115.1%, and the matrix effect was minimal. Low limits of detection (0.003–1 ng/mL) and limits of quantification (0.01–5 ng/mL) were obtained except cis‐aconitic acid. Variations in reproducibility for standard solution at three different concentrations levels were <9%. This is the first report of the simultaneous analysis of ten organic acids in microalgae, which promotes better understanding of their growth state and provides reference value for high‐yield microalgae cultures.     

Quantitative structure‐retention relationships of the chromatographic retentions of phthalic acid ester contaminants in foods

The harmful health effects caused by phthalic acid esters have been supported from the increasing scientific evidence, developing the efficient methodologies to monitor the levels of phthalic acid esters in various foods become especially important from the aspects of human exposure assessment and their migration mechanistic understanding. In this study, quantitative structure‐retention relationship studies on both the gas and liquid chromatographic retention times of 23 phthalic acid esters were performed by genetic function approximation, and the optimal quantitative structure‐retention relationship models (r² > 0.980, r²_CV > 0.960, and r²_pred > 0.865) passed the statistical tests of cross‐validation, randomization, external prediction, Roy′ r_m² metrics, Golbraikh‐Tropsha′ criteria and applicability domain. The established predictive models elucidate the structural requirements for the retention of phthalic acid esters over different chromatographic columns, which were finally used to predict the retention times of 11 new phthalic acid esters. Hopefully, this work could provide useful guidelines for better understanding and accurate prediction of the retention behavior of undetermined phthalic acid esters when lacking standard samples or under poor experimental conditions, and make the simultaneous identification and quantification of numerous phthalic acid esters possible.     

Determination of glyphosate and aminomethylphosphonic acid in aqueous soil matrices: A critical analysis of the 9‐fluorenylmethyl chloroformate derivatization reaction and application to adsorption studies

The assessment of the environmental fate of glyphosate and its degradation product (aminomethylphosphonic acid) is of great interest given the widespread use of the herbicide. Studies of adsorption–desorption and transport processes in soils require analytical methods with sensitivity, accuracy, and precision suitable for determining the analytes in aqueous equilibrium solutions of varied complexity. In this work, the effect of factors on the yield of the derivatization of both compounds with 9‐fluorenylmethyl chloroformate for applying in aqueous solutions derived from soils was evaluated through factorial experimental designs. Interference effects coming from background electrolytes and soil matrices were established. The whole method had a linear response up to 640 ng/mL (R² > 0.999) under optimized conditions for high‐performance liquid chromatography with fluorescence detection. Limits of detection were 0.6 and 0.4 ng/mL for glyphosate and aminomethylphosphonic acid, respectively. The relative standard deviation was 4.4% for glyphosate (20 ng/mL) and 5.9% for aminomethylphosphonic acid (10 ng/mL). Adsorption of compounds on four different soils was assessed. Isotherm data fitted well the Freundlich model (R² > 0.97). K_f constants varied between 93 ± 3.1 and 2045 ± 157 for glyphosate and between 99 ± 4.1 and 1517 ± 56 (μg^1‐1/n mL^1/n g^–1) for aminomethylphosphonic acid, showing the broad range of applicability of the proposed method.     

Ultra‐performance convergence chromatography for the quantitative determination of bioactive compounds in Aralia continentalis Kitagawa as quality control markers

A rapid ultra‐performance convergence chromatography method was developed for the quantitative determination of bioactive compounds in Aralia continentalis as quality control markers. Quantitative analysis indicated the presence of two major bioactive compounds: diterpenoid acids continentalic acid and kaurenoic acid. Using a Torus 1‐aminoanthracene column, continentalic acid and kaurenoic acid were separated in less than 8 min. The method was validated with respect to precision, accuracy, and linearity according to the International Conference on Harmonization guidelines. The optimized method exhibited a good linear correlation (r ² > 0.996), excellent precision (RSD < 1.0%), and acceptable recoveries (99.97–100.26%). Limits of detection for continentalic acid and kaurenoic acid were 0.068 and 0.097 μg/mL, respectively, while their corresponding limits of quantitation were 0.207 and 0.295 μg/mL. The system performance of ultra‐performance convergence chromatography was compared with that of conventional high‐performance liquid chromatography with respect to analysis time and efficiency. The proposed method was found to be reliable and convenient for the quantitative analysis of continentalic acid and kaurenoic acid in A. continentalis from South Korea and A. pubescens from China. This study is expected to serve as a guideline for the quality control of Aralia continentalis .     

Ion‐pair‐based hollow‐fiber liquid‐phase microextraction combined with high‐performance liquid chromatography for the simultaneous determination of urinary benzene,toluene, and styrene metabolites

In the current study, a novel technique for extraction and determination of trans,trans‐muconic acid, hippuric acid, and mandelic acid was developed by means of ion‐pair‐based hollow fiber liquid‐phase microextraction in the three‐phase mode. Important factors affecting the extraction efficiency of the method were investigated and optimized. These metabolites were extracted from 10 mL of the source phase into a supported liquid membrane containing 1‐octanol and 10% w/v of Aliquat 336 as the ionic carrier followed by high‐performance liquid chromatography analysis. The organic phase immobilized in the pores of a hollow fiber was back‐extracted into 24 μL of a solution containing 3.0 mol/L sodium chloride placed inside the lumen of the fiber. A very high preconcentration of 212‐ to 440‐fold, limit of detection of 0.1–7 μg/L, and relative recovery of 87–95% were obtained under the optimized conditions of this method. The relative standard deviation values for within‐day and between‐day precisions were calculated at 2.9–8.5 and 4.3–11.2%, respectively. The method was successfully applied to urine samples from volunteers at different work environments. The results demonstrated that the method can be used as a sensitive and effective technique for the determination of the metabolites in urine.     

Determination of methyl methanesulfonate and ethyl methanesulfonate in methanesulfonic acid by derivatization followed by high‐performance liquid chromatography with ultraviolet detection

Methanesulfonic acid is routinely used in pharmaceuticals but can contain potentially genotoxic impurities such as methyl methanesulfonate and ethyl methanesulfonate. The aim of this study was to develop a simple high‐performance liquid chromatography with ultraviolet detection method for determining methyl methanesulfonate and ethyl methanesulfonate in methanesulfonic acid. Samples (250 mg) in water/acetonitrile (200 μL) were first combined with 10.0 mol/L sodium hydroxide solution (270 μL). Then they were mixed with 2.0 mg/mL N ,N‐diethyldithiocarbamate (500 μL), diluted to 5 mL with N ,N‐dimethylacetamide and allowed to react at 80°C for 1 h. The derivatives were analyzed using gradient high‐performance liquid chromatography with ultraviolet detection (277 nm) and structurally elucidated by liquid chromatography with mass spectrometry. With acetonitrile/5 mmol/L ammonium acetate solution as the eluent and 1 mL/min as the flow rate on a C18 column, the derivatives were eluted at 10.6 and 14.8 min. Good linearity (correlation coefficients > 0.999) and low limits of quantitation (0.6 ppm) were obtained. The recoveries were in the range of 80–115% with relative standard deviation < 5.0%. Finally, the established method was successfully used for the determination of methyl methanesulfonate and ethyl methanesulfonate in methanesulfonic acid.     

Synthesis of star‐shaped poly(D,L‐lactic acid‐alt‐glycolic acid)‐b‐poly(L‐lactic acid) with the poly(D,L‐lactic acid‐alt‐glycolic acid) macroinitiator and stannous octoate catalyst

Two types of three‐arm and four‐arm, star‐shaped poly(D,L ‐lactic acid‐alt‐glycolic acid)‐b‐poly(L ‐lactic acid) (D,L ‐PLGA50‐b‐PLLA) were successfully synthesized via the sequential ring‐opening polymerization of D,L ‐3‐methylglycolide (MG) and L ‐lactide (L ‐LA) with a multifunctional initiator, such as trimethylolpropane and pentaerythritol, and stannous octoate (SnOct₂) as a catalyst. Star‐shaped, hydroxy‐terminated poly(D,L ‐lactic acid‐alt‐glycolic acid) (D,L ‐PLGA50) obtained from the polymerization of MG was used as a macroinitiator to initiate the block polymerization of L ‐LA with the SnOct₂ catalyst in bulk at 130 °C. For the polymerization of L ‐LA with the three‐arm, star‐shaped D,L ‐PLGA50 macroinitiator (number‐average molecular weight = 6800) and the SnOct₂ catalyst, the molecular weight of the resulting D,L ‐PLGA50‐b‐PLLA polymer linearly increased from 12,600 to 27,400 with the increasing molar ratio (1:1 to 3:1) of L ‐LA to MG, and the molecular weight distribution was rather narrow (weight‐average molecular weight/number‐average molecular weight = 1.09–1.15). The ¹H NMR spectrum of the D,L ‐PLGA50‐b‐PLLA block copolymer showed that the molecular weight and unit composition of the block copolymer were controlled by the molar ratio of L ‐LA to the macroinitiator. The ¹³C NMR spectrum of the block copolymer clearly showed its diblock structures, that is, D,L ‐PLGA50 as the first block and poly(L ‐lactic acid) as the second block. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 409–415, 2002     

Separation of high‐purity eicosapentaenoic acid and docosahexaenoic acid from fish oil by pH‐zone‐refining countercurrent chromatography

The evidence for unique effects of eicosapentaenoic acid and docosahexaenoic acid is growing. Further understanding and exploration of their independent effects in the nutraceutical and pharmaceutical industry is calling for the more efficient separation techniques to overcome the equivalent chain length rule of fatty acids. In this study, free eicosapentaenoic and docosahexaenoic acid were successfully separated by pH‐zone‐refining countercurrent chromatography for the first time. The different solvent systems and the influence of retainer and eluter concentration on the separation efficiency were investigated. A two‐phase solvent system composed of n‐heptane/methanol/water (100:55:45, v/v) was selected with 50 mM of trifluoroacetic acid as retainer in the organic phase and 40 mM of ammonium hydroxide as an eluter in the aqueous phase for the separation of 500 mg of free fatty acids from a refined fish oil sample. 79.6 mg of eicosapentaenoic acid and 328.3 mg docosahexaenoic acid were obtained with the purities of 95.5 and 96.9% respectively determined by gas chromatography with mass spectrometry after methyl esterification. The scale‐up separation of 1 g of samples from both refined and crude fish oil after urea complexation were also achieved successfully with a markedly increased concentration 150 mM of retainer, producing satisfactory yields and purities of targets.     

Development and validation of a highly sensitive and robust LC‐ESI‐MS/MS method for simultaneous quantitation of simvastatin acid,amlodipine and valsartan in human plasma: application to a clinical pharmacokinetic study

A high‐throughput, simple, highly sensitive and specific LC‐MS/MS method has been developed for simultaneous estimation of simvastatin acid (SA), amlodipine (AD) and valsartan (VS) with 500 µL of human plasma using deuterated simvastatin acid as an internal standard (IS). The API‐4000 LC‐MS/MS was operated under the multiple reaction‐monitoring mode (MRM) using electrospray ionization. The assay procedure involved precipitation of SA, AD, VS and IS from plasma with acetonitrile. The total run time was 2.8 min and the elution of SA, AD, VS and IS occurred at 1.81, 1.12, 1.14 and 1.81 min, respectively; this was achieved with a mobile phase consisting of 0.02 m ammonium formate (pH 4.5):acetonitrile (20:80, v/v) at a flow rate of 0.50 mL/min on an X‐Terra C₁₈ column. A linear response function was established for the range of concentrations 0.5–50 ng/mL (r > 0.994) for VS and 0.2–50 ng/mL (r > 0.996) for SA and AD. The method validation parameters for all three analytes met the acceptance as per FDA guidelines. This novel method has been applied to human pharmacokinetic study. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparative and scaled‐up separation of high‐purity α‐linolenic acid from perilla seed oil by conventional and pH‐zone refining counter current chromatography

α‐Linolenic acid is an essential omega‐3 fatty acid needed for human health. However, the isolation of high‐purity α‐linolenic acid from plant resources is challenging. The preparative separation methods of α‐linolenic acid by both conventional and pH‐zone refining counter current chromatography were firstly established in this work. The successful separation of α‐linolenic acid by conventional counter current chromatography was achieved by the optimized solvent system n‐heptane/methanol/ water/acetic acid (10:9:1:0.04, v/v), producing 466 mg of 98.98% α‐linolenic acid from 900 mg free fatty acid sample prepared from perilla seed oil with linoleic acid and oleic acid as by‐products. The scaled‐up separation in 45× is efficient without loss of resolution and extension of separation time. The separation of α‐linolenic acid by pH‐zone refining counter current chromatography was also satisfactory by the solvent system n‐hexane/methanol/water (10:5:5, v/v) and the optimized concentration of trifluoroacetic acid 30 mM and NH₄OH 10 mM. The separation can be scaled up in 180× producing 9676.7 mg of 92.79% α‐linolenic acid from 18 000 mg free fatty acid sample. pH‐zone refining counter current chromatography exhibits a great advantage over conventional counter current chromatography with 20× sample loading capacity on the same column.     

Cobalt‐based metal coordination polymers with 4,4′‐bipyridinyl groups: highly efficient catalysis for one‐pot synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions

Three new metal coordination complexes, namely [Co(BPY)₂(H₂O)₂](BPY)(BS)₂(H₂O)₄ ( 1 ), [Co(BPY)₂(H₂O)₄](ABS)₂(H₂O)₂ ( 2 ) and [Co(BPY)(H₂O)₄](MBS)₂ ( 3 ) (BPY = 4,4′‐bipyridine, BS = phenylsulfonic acid, ABS = p‐aminobenzenesulfonic acid, MBS = p‐methylbenzenesulfonic acid), were obtained under hydrothermal conditions. Complexes 1 , 2 , 3 were structurally characterized using single‐crystal X‐ray diffraction and infrared spectroscopy. All of them display low‐dimensional motifs: complex 1 displays a two‐dimensional structure; and complexes 2 and 3 exhibit a one‐dimensional tape structure. Through strong intermolecular hydrogen bonding interactions and weak packing interactions, all of them further stack to generate a three‐dimensional supramolecular architecture. Catalysts 1 , 2 , 3 were involved in the green synthesis of a variety of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions through Biginelli reactions. The corresponding catalytic product was obtained in quantitative yields (99%) under eco‐friendly synthesis conditions for the variety of reactions. Catalysts 1 , 2 , 3 exhibit excellent efficiency for the desired product, and their catalytic performance shows the following order: 2  >  1  ≈  3 , which can be ascribed to the hydrophobic interactions of different phenylsulfonate groups. The catalytic performance for the Biginelli reaction is not only dependent on the selected solvents, but also inversely proportional to the polarities of the solvents. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of the ionic strength on the redox reaction of dicyanobis(bipyridine)iron(III)‐iodide in binary and ternary solvent systems

The redox reaction between dicyanobis(bipyridine)iron(III) and iodide ion follows first‐order kinetics in 10% (v/v) tertiary butyl alcohol‐water. The reaction was found first and zero order in iodide and dicyanobis(bipyridine)iron(III), respectively, at 0.06 M ionic strength and 293 ± 1 K. The thermodynamic parameters of activation such as E_A (16.07 kJ mol^?1), A (1 × 10^?4 M s^?1), ΔH^# (13.6 kJ mol^?1), ΔS^# (?329.81 J K^?1 mol^?1), and ΔG^# (90.1 kJ mol^?1) were determined. The effect of the ionic strength on the rate constant leads to recognizing the stabilization or destabilization of the transition state complex that forms during the rate‐determining step of the reaction. The value of the zero‐order rate constant was decreased with increasing ionic strength that yielded a negative value of the slope in each binary and ternary solvent systems. This negative sign refers to the electron transfer between opposite charge carriers such as [Fe^III(bpy)₂(CN)₂]⁺ and I^? during the rate‐determining step. The destabilization of the transition state complex is surfaced by the increasing slope, that is, 5 < 10 < 15% (v/v) tertiary butyl alcohol‐water with a gradual decrease in the rate constant. However, its stability emerges by relatively small values of the slope in 17.5 < 25 ≤ 30% (v/v) tertiary butyl alcohol‐water and 8:2:90 < 6:4:90% (v/v) dioxane: tertiary butyl alcohol: water with reasonably fast rate of reaction.     

Isatin‐(thio)semicarbazide/oxime‐1H‐1,2,3‐triazole‐coumarin Hybrids: Design,Synthesis, and in vitro Anti‐mycobacterial Evaluation

Isatin and coumarin derivatives with potential anti‐tubercular activity, while (thio)semicarbazide/oxime and 1H‐1,2,3‐triazole moieties exhibited favorable properties such as hydrogen bonding and/or metal chelation capability, so integration of the four pharmacophores into one molecule may provide more effective anti‐tubercular candidates. Based on the consideration earlier, 12 isatin‐(thio)semicarbazide/oxime‐1H‐1,2,3‐triazole‐coumarin hybrids 8a–l were designed, synthesized, and evaluated for their in vitro anti‐mycobacterial activities against M. tuberculosis (MTB) H₃₇Rv and MDR‐TB. The results showed that all the hybrids (MIC: 50–>200 μg/mL) exhibited weak to moderate inhibitory activity against MTB H₃₇Rv and MDR‐TB, which were far less potent than the references isoniazid (MIC: 0.05 μg/mL) and rifampicin (MIC: 0.39 μg/mL) against MTB H₃₇Rv. The most active hybrid 8h (MIC: 50 μg/mL) was comparable with rifampicin (MIC: 32 μg/mL) and more active than isoniazid (MIC: >128 μg/mL) against MDR‐TB, could be act as a lead for further optimization. Moreover, the enriched structure–activity relationship paved the way to the further rational development of this kind of hybrids.     

Ionic liquid vortex‐simplified matrix solid‐phase dispersion for the simultaneous determination of terpenoids,crocins, quinic acid derivatives and flavonoids in Gardeniae fructus by UHPLC

A novel ionic‐liquid‐based vortex‐simplified matrix solid‐phase dispersion method using 2,6‐dimethyl‐β‐cyclodextrin was established by ultra high performance liquid chromatography coupled with a photodiode array detector. 2,6‐Dimethyl‐β‐cyclodextrin was first used as a promising adsorbent in this proposed method for simultaneous determination of eight compounds in Gardeniae fructus. These compounds are terpenoids (geniposidic acid, genipin‐1‐β‐D‐gentiobioside, geniposide, 8‐o‐acetyl shanzhiside methyl ester), crocins (crocin‐I, crocin‐II), quinic acid derivatives (chlorogenic acid), and flavonoids (isoquercitrin), respectively. Several parameters were investigated in the adsorption and desorption processes to obtain the optimal conditions, including 2,6‐dimethyl‐β‐cyclodextrin as sorbent, 0.5 mL 100 mM 1‐dodecyl‐3‐methylimidazolium hydrogen sulfate as the extraction solvent, 2:1 of sample/sorbent ratio, grinding for 2 min and vortexing for 60 s. The recoveries of the eight compounds ranged from 96.6 to 100% (<3.50%). The limits of detection and quantification were in the range of 0.02–0.30 and 0.06–1.25  μg/mL, respectively. Meanwhile, a good linearity was attained with r values (>0.9997). The established method showed higher extraction efficiency and less reagent consumption than traditional matrix solid phase dispersion and ultrasonic‐assisted extraction. Hence, it could be applied for sample preparation and analysis of natural products.     

Design,Synthesis and In Vitro Anti‐mycobacterial Activity of Propylene‐1H‐1,2,3‐triazole‐4‐methylene‐tethered Isatin‐moxifloxacin Hybrids

Ten propylene‐1H‐1,2,3‐triazole‐4‐methylene‐tethered isatin‐moxifloxacin hybrids 5a–j were synthesized via Cu‐promoted azide‐alkyne cycloaddition reaction, and screened for their in vitro anti‐mycobacterial activities against Mycobacterium tuberculosis H₃₇Rv and multidrug‐resistant tuberculosis. The results showed that all the synthesized hybrids [minimum inhibitory concentration (MIC): 0.25–4.0 μg/mL] displayed considerable activities against the tested two strains, but all less active than the parent moxifloxacin (MIC: 0.10 and 0.12 μg/mL). The resistance index of the most targets was around 1, suggesting this kind of hybrids could reduce the cross–resistance to some extent. Among them, hybrid 5 g was found most active against Mycobacterium tuberculosis H₃₇Rv with MIC of 0.39 μg/mL, which was comparable with rifampicin (MIC: 0.39 μg/mL), while conjugate 5a (MIC: 0.25 μg/mL) was 128– > 512 times more active than rifampicin (MIC: 32 μg/mL) and isoniazid (MIC: >128 μg/mL) against multidrug‐resistant tuberculosis.     

Atom transfer radical polymerization of n‐butyl acrylate catalyzed by CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine

The homogeneous atom transfer radical polymerization (ATRP) of n‐butyl acrylate with CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine as a catalyst and ethyl 2‐bromoisobutyrate as an initiator was investigated. The kinetic plots of ln([M]₀/[M]) versus the reaction time for the ATRP systems in different solvents such as toluene, anisole, N,N‐dimethylformamide, and 1‐butanol were linear throughout the reactions, and the experimental molecular weights increased linearly with increasing monomer conversion and were very close to the theoretical values. These, together with the relatively narrow molecular weight distributions (polydispersity index ～ 1.40 in most cases with monomer conversion > 50%), indicated that the polymerization was living and controlled. Toluene appeared to be the best solvent for the studied ATRP system in terms of the polymerization rate and molecular weight distribution among the solvents used. The polymerization showed zero order with respect to both the initiator and the catalyst, probably because of the presence of a self‐regulation process at the beginning of the reaction. The reaction temperature had a positive effect on the polymerization rate, and the optimum reaction temperature was found to be 100 °C. An apparent enthalpy of activation of 81.2 kJ/mol was determined for the ATRP of n‐butyl acrylate, corresponding to an enthalpy of equilibrium of 63.6 kJ/mol. An apparent enthalpy of activation of 52.8 kJ/mol was also obtained for the ATRP of methyl methacrylate under similar reaction conditions. Moreover, the CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine‐based system was proven to be applicable to living block copolymerization and living random copolymerization of n‐butyl acrylate with methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3549–3561, 2002     

Synthesis of poly(succinimide) by bulk polycondensation of L‐aspartic acid with an acid catalyst

The bulk polycondensation of L ‐aspartic acid (ASP) with an acid catalyst under batch and continuous conditions was established as a preparative method for producing poly(succinimide) (PSI). Although sulfuric acid, p‐toluenesulfonic acid, and methanesulfonic acid were effective at producing PSI in a high conversion of ASP, o‐phosphoric acid was the most suitable catalyst for yielding PSI with a high weight‐average molecular weight (M_w) in a quantitative conversion; that is, the M_w value was 24,000. For the continuous process using a twin‐screw extruder at 3.0 kg · h⁻¹ of the ASP feed rate, the conversion was greater than 99%, and the M_w value was 23,000 for the polycondensation with 10 wt % o‐phosphoric acid at 260°C. Sodium polyaspartate (PASP‐Na) originating from the acid‐catalyzed polycondensation exhibited high biodegradability and calcium‐ion‐chelating ability. The total organic carbon value was 86 ∼ 88%, and 100 g of PASP‐Na chelated with 5.5 ∼ 5.6 g of calcium ion, which was similar to the value for PASP‐Na from the acid‐catalyzed polycondensation with a mixed solvent © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 117–122, 2000