三轴应力下花岗岩加载破坏的能量演化和损伤特征

为揭示不同围压下硬岩在破坏过程中的力学性质和能量演化规律,基于RMT-150B岩石力学试验系统对花岗岩试样进行不同围压条件下常规三轴压缩试验。研究结果表明:岩样的峰值应力和围压具有较强的线性关系,利用Mohr-Coulomb强度准则求出花岗岩的黏聚力为23.548 MPa,内摩擦角为57.629°。围压对花岗岩加载破坏过程中能量演化的影响显著,岩石的峰值能量、弹性应变能以及耗散能都随着围压的增大而增大,且两者呈线性增加关系。根据岩石的线性储能规律,提出了确定岩石应力阈值的方法。围压越大,起裂应力和扩容应力越大,且岩样起裂点处与扩容点处的能量也越大;当围压较低时,岩石破坏前储存的能量较少,破坏时能量释放速率低,岩样表现为典型低劈裂破坏;在高围压情况下,能量快速释放,岩样表现为剪切破坏。基于能量演化规律,提出了岩石损伤演化模型,得到了花岗岩的损伤变量D在不同围压下加载破坏过程中的演化规律。     

热波传递过程中的熵产分析

傅里叶导热定律导出的温度演化方程将得出无限大的热扰动传播速率。为了克服这个问题,一些修正导热模型被提出,可以得到双曲型温度方程,保证有限的热波传播速率。但是,新的传热模型得出的温度演化将使现有的不可逆热力学中熵产不能保持正定。拓展不可逆热力学通过修正熵以及熵产的表达式,使双曲导热也能得到正定的熵产率。热质理论用力学的概...     

基于(火积)理论的轧钢加热炉壁变截面绝热层构形优化

基于绝热过程(火积)耗散极值原理, 分别在对流传热和复合传热(对流和辐射传热)边界条件下, 对轧钢加热炉壁变截面绝热层进行构形优化, 得到(火积)耗散率最小的绝热层最优构形. 结果表明: 与等截面绝热层相比, (火积)耗散率最小的变截面绝热层整体绝热性能更优. 热损失率最小和(火积)耗散率最小的绝热层最优构形是不同的. 热损失率最小的绝热层最优构形使得其能量损失减小, 而(火积)耗散率最小的绝热层最优构形使得其整体绝热性能提高. (火积)耗散率最小和最大温度梯度最小的变截面绝热层最优构形差别较小, 此时(火积)耗散率最小的绝热层最优构形在提高绝热层整体绝热性能的同时也提高了其热安全性. 基于(火积)理论的绝热层构形优化为绝热系统的优化设计提供了新的指导.     

热质的运动和传递-最低热质能耗散原理和热质运动方程

过增元基于质能方程提出了热质的概念.在非平衡热力学中,存在最低能量耗散原理,根据该原理可以导出热传导,扩散及粘性流动等不可逆输运过程的方程式.当采用热质模型对传热现象进行描述时,发现热质的运动也满足最小作用量原理:最低热质能耗散原理,根据该原理可以推导得出热质运动的动量守恒方程。     

MUSCL格式TV性质的非线性分析

分析求解非线性双曲型守恒律的MUSCL类格式的TV性质。首先从该类格式的一般形式出发,提出和证明了该类格式实现TVD的需求。所提TVD需求直接表示为对变量变差符号和量值限制,体现了双曲型方程解的依赖域原理,为分析MUSCL格式的TV性质提供了理论工具。同时提出了基于TVD需求再构数值解分布,以降低数值耗散从而提高接触面及膨胀波头/波尾分辨率的基本思路。     

界面摩擦过程非连续能量耗散机理研究

结合无磨损界面摩擦微观能量耗散机理的复合振子模型,运用量子理论建立了微观能量耗散的量子力学模型.分析表明：在滑动过程中,当界面原子从一种平衡态跳跃至另一种平衡态时,摩擦功以离散形式耗散为界面原子热振子,且界面吸收能量的能力是离散的;高能态界面较低能态界面吸收能量的能力强,表现为易于吸收界面势能.界面原子吸收和释放能量的离散性在宏观上表现为摩擦功耗散的非连续性,为从微观角度解释无磨损界面摩擦状态周期性变化提供了理论基础. 关键词： 摩擦 非连续能量耗散 复合振子模型     

准静态颗粒介质的弹性势能弛豫分析

颗粒体系是典型的多体相互作用体系, 具有多重的能量亚稳态. 对于准静态颗粒体系, 引入构型颗粒温度T_c描述弹性势能涨落. 本文认为平衡的体系具有一定的构型颗粒温度T_a, 其量值反映了其结构特征. 当外界扰动激发的构型颗粒温度超出T_a时, 产生不可逆过程. 通过对应力松弛过程的分析, 发现(T_c-T_a)激发了弹性弛豫, 且(T_c-T_a)越大则松弛过程中应力变化越大, 最终构型颗粒温度T_c→T_a时,宏观应力松弛结束,体系达到新的能量亚稳态.     

Relative humidity and temperature dependence of mechanical degradation of natural fiber composites

In this paper, the mechanical degradation of natural fiber composites is studied with the consideration of the relative humidity and the temperature. A nonlinear constitutive model is established, which employs an internal variable to describe the mechanical degradation related to the energy dissipation during moisture absorption. The existing experimental researches demonstrated that the mechanical degradation is an irreversible thermodynamic process induced by the degradation of fibers and the damages of interfaces between fiber and matrix, both of which depend on the variation of the relative humidity or the temperature. The evolution of the mechanical degradation is obtained through the determination of dissipation rates as a function of the relative humidity and the temperature. The theoretically predicted mechanical degradations are compared with experimental results of sisal fiber reinforced composites subject to different relative humidity and temperatures, and a good agreement is found.     

驾驶员预估效应下车流能耗演化机理研究

考虑实际交通中驾驶员预估效应对车辆跟驰行为的影响, 提出了一个改进跟驰模型. 采用线性稳定性理论获得了该模型的线性稳定性判据. 运用数值仿真的方法, 系统研究了驾驶员预估效应下车流的整体平均能耗和单车能耗的演化机理. 研究结果表明, 驾驶员预估效应能显著提高车流稳定性, 且随着驾驶员预估时长的增加, 车流的整体平均能量损耗和单车能量损耗将逐渐降低.     

Energy Cost of Dynamical Stabilization: Stored versus Dissipated Energy

Dynamical stabilization processes (homeostasis) are ubiquitous in nature, but the needed energetic resources for their existence have not been studied systematically. Here, we undertake such a study using the famous model of Kapitza’s pendulum, which has attracted attention in the context of classical and quantum control. This model is generalized and rendered autonomous, and we show that friction and stored energy stabilize the upper (normally unstable) state of the pendulum. The upper state can be rendered asymptotically stable, yet it does not cost any constant dissipation of energy, and only a transient energy dissipation is needed. Asymptotic stability under a single perturbation does not imply stability with respect to multiple perturbations. For a range of pendulum–controller interactions, there is also a regime where constant energy dissipation is needed for stabilization. Several mechanisms are studied for the decay of dynamically stabilized states.     

A theoretical model of turbulent fiber suspension and its application to the channel flow

A theoretical model of turbulent fiber suspension is developed by deriving the equations of Reynolds averaged Navier-Stokes,turbulence kinetic energy and turbulence dissipation rate with the additional term of fibers.In order to close the above equations,the equation of probability distribution function for mean fiber orientation is also derived.The theoretical model is applied to the turbulent channel flow and the corresponding equations are solved numerically.The numerical results are verified by comparisons with the experimental ones.The effects of Reynolds number,fiber concentration and fiber aspect-ratio on the velocity profile,turbulent kinetic energy and turbulent dissipation rate are analyzed.Based on the numerical data,the expression for the velocity profile in the turbulent fiber suspension channel flow,which includes the effect of Reynolds number,fiber concentration and aspect-ratio,is proposed.     

Application of femtosecond‐pulsed lasers for direct optical manipulation of biological functions

Absorption of photon energy by cells or tissue can evoke photothermal, photomechanical, and photochemical effects, depending on the density of the deposited energy. Photochemical effects require a low energy density and can be used for reversible modulation of biological functions. Ultrashort‐pulsed lasers have a high intensity due to the short pulse duration, despite its low average energy. Through nonlinear absorption, these lasers can deliver very high peak energy into the submicrometer focus area without causing collateral damage. Absorbed energy delivered by ultrashort‐pulsed laser irradiation induces free electrons, which can be readily converted to reactive oxygen species (ROS) and related free radicals in the localized region. Free radicals are best known to induce irreversible biological effects via oxidative modification; however, they have also been proposed to modulate biological functions by releasing calcium ions from intracellular organelles. Calcium can evoke variable biological effects in both excitable and nonexcitable cell types. Controlled stimulation by ultrashort laser pulses generate intracellular calcium waves that can modulate many biological functions, such as cardiomyocyte beat rate, muscle contractility, and blood–brain barrier (BBB) permeability. This article presents optical methods that are useful therapeutic and research tools in the biomedical field and discuss the possible mechanisms responsible for biological modulation by ultrashort‐pulsed lasers, especially femtosecond‐pulsed lasers.     

On dissipation mechanisms in micromagnetics

Within the framework of a dynamic version of micromagnetics [1,2], the space-time evolution of magnetization in a rigid, saturated ferromagnet is governed by the following equation: γ^-1 = ×( + + div ), where the interaction couple × and the couple stress are to be constitutively specified. Under constitutive assumptions for , , and the free energy ψ, that allow for equilibrium response and viscosity out of equilibrium and agree with the dissipation principle - ^. + ^. ∇ - ≥ 0, the above evolution equation yields a broad generalization of the standard Gilbert equation. In particular, while the standard Gilbert equation only incorporates relativistic dissipation, it is shown that the dissipation mechanisms compatible with the generalized Gilbert equation include exchange dissipation [2], dry-friction dissipation [3], and others. It is also shown that the additional term proposed in [4] to account for exchange dissipation, rather than having a genuine dissipative nature, modifies instead the nature of possible equilibria; and that such a modification is an automatic side effect when dry-friction dissipation is incorporated in the manner of [3]. Received 31 October 2000     

基于最小热量传递势容耗散原理的导热优化

导热是一个不可逆过程,它的优化遵循最小热量传递势容耗散原理。本文根据该原理,对体点问题中的高导热材料布置进行了优化。当域内导热系数的积分为定值时,最小热量传递势容耗散对应于导热系数与当地热流成正比,即全场的温度梯度均匀。以温度梯度均匀化为准则,利用仿生优化方法得到了域内有均匀和非均匀热源时高导热材料的最优布置。     

Discovery,characterization and modelling of novel shape memory behaviour of fcc metal nanowires

Novel shape memory behaviour was discovered recently in single-crystalline fcc nanowires of Cu, Ni and Au with lateral dimensions below 5?nm. Under proper thermomechanical conditions, these wires can recover elongations up to 50%. This phenomenon only exists at the nanoscale and is associated with reversible lattice reorientations within the fcc lattice structure driven by surface stresses. Whereas the propagation of partial dislocations and twin planes specific to fcc metals are the required mechanism, only materials with higher propensities for twinning (e.g. Cu and Ni) show this behaviour and those with lower propensities for twinning (e.g. Al) do not. This paper provides an overview of this novel behaviour with a focus on the transformation mechanism, driving force, reversible strain, size and temperature effects and energy dissipation. A mechanism-based micromechanical continuum model for the tensile behaviour is developed. This model uses a decomposition of the lattice reorientation process into a reversible, smooth transition between a series of phase-equilibrium states and a superimposed irreversible, dissipative propagation of a twin boundary. The reversible part is associated with strain energy functions with multiple local minima and quantifies the energy conversion process between the twinning phases. The irreversible part is due to the ruggedness of the strain energy landscape, associated with dislocation nucleation, gliding and annihilation, and characterizes the dissipation during the transformation. This model captures all major characteristics of the behaviour, quantifies the size and temperature effects and yields results which are in excellent agreement with data from molecular dynamics simulations.     

Thermodynamic cost of reversible computing

Reversible computing requires preservation of all information throughout the entire computational process; this implies that all errors that appear as a result of the interaction of the information-carrying system with uncontrolled degrees of freedom must be corrected. But this can only be done at the expense of an increase in the entropy of the environment corresponding to the dissipation, in the form of heat, of the "noisy" part of the system's energy. This Letter gives an expression of that energy in terms of the effective noise temperature, and analyzes the relationship between the energy dissipation rate and the rate of computation. Finally, a generalized Clausius principle based on the concept of effective temperature is presented.     

金属材料中高能重离子辐照效应的理论描述

简要介绍了高能重离子在金属材料中引起辐照效应的主要理论 ,特别是与电子能损引起的缺陷产生与演化、离子潜径迹形成、辐照相变以及各向异性塑性形变等效应相应的理论描述.Experimental results showed that, for high energy heavy ion irradiations, electronic energy loss could play a dominant role in damage process in solid materials. In order to explain the experimental phenomena and results, a series of theoretical models based on Coulomb explosion or thermal spike mechanisms have been proposed. In the present paper, more attention was paid to theoretical expressions of high energy heavy ion irradiation induced effects in metallic materials ...     

Thermoelastic damping effect on in-extensional vibration of rotating thin ring

Sensitive devices such as resonant sensors and radio frequency micro-electro-mechanical system (RF-MEMS) filters etc., require high Quality factors (Q-factors) defined as the ratio of total system energy to dissipation that occurs due to various damping mechanisms. Also, thermoelastic damping is considered to be one of the most important factors to elicit energy dissipation due to the irreversible heat flow of oscillating structures in the micro scales. In this study, the Q-factor for thermoelastic damping is investigated in rotating thin rings with in-plane vibration. First, in order to obtain the temperature profile of the model, a heat conduction equation for the thermal flow across the radial direction is solved based on the bending approximation so-called in-extensional approximation of the ring. Using the temperature distribution coupled with a displacement, a governing equation of the ring model can then be derived. Eventually, an eigen-value analysis is performed to obtain the natural frequency of rotating thin rings, and the analytical and numerical values of Q-factors can then be determined by the definition. Furthermore, the effects of rotating speed, dimensions of the ring, mode numbers and ambient temperatures on the Q-factor are discussed in detail.     

Picosecond streak camera performance in studies of exciples formation dynamics

Kirchhoff's law has caused confusion in the discussion about the theoretical maximum work from radiation because it permits only infinitesimal or irreversible absorption. With the aid of an optical circulator, non-Kirchhoff behaviour is possible in principle which permits at the same time complete and reversible radiation absorption. The key to overcome Kirchhoff's law seems to be the magnetic field, a condition explicitly excluded by Kirchhoff. The work extracted in complete reversible conversion of radiation is calculated. The irreversibilities connected with the emission process are discussed.     

Concepts of stability and symmetry in irreversible thermodynamics. I

Concepts of stability and symmetry in irreversible thermodynamics are developed through the analysis of system energy flows. The excess power function, derived from a local energy conservation equation, is shown to yield necessary and sufficient stability criteria for linear and nonlinear irreversible processes. In the absence of symmetry-destroying external forces, the linear range may be characterized by a set of phenomenological coefficient symmetries relating coupled forces and displacements, velocities, and accelerations, whereas rotational phenomena in nonlinear processes may be characterized by skew-symmetric components of the phenomenological coefficients. A physical interpretation of the nature of the skew-symmetric parts is given and the variational principle of minimum dissipation of energy is related to a stability criterion.