Characterization of Diastereomeric Equilibria of Pseudotetrahedral Bis[(R or S)‐N‐1‐(Ar)Ethylsalicylaldiminato‐κ2N,O]zinc(II) with Λ/Δ‐Chirality‐At‐Metal Induction

A family of bis[(R or S)‐N‐1‐(Ar)ethylsalicylaldiminato‐κ²N,O]‐Δ/Λ‐zinc(II) {Ar=C₆H₅ (ZnRL¹ or ZnSL¹), p‐CH₃OC₆H₄ (ZnRL² or ZnSL²) and p‐ClC₆H₄ (ZnRL³ or ZnSL³)} compounds was synthesized and investigated by multiple methods. They feature Λ/Δ‐chirality‐at‐metal induction along the pseudo‐C ₂ axis of the molecules. The chirality induction is quantitative in the solid state, explored by X‐ray crystallography and powder X‐ray diffraction (PXRD), where R or S‐ligated complexes diastereoselectively yield Λ or Δ‐configuration at the metal. On the other hand, Λ and Δ‐diastereomers co‐exist in solution. The Λ⇆Δ equilibrium is solvent‐ and temperature‐dependent. Electronic circular dichroism (ECD) spectra confirm the existence of a diastereomeric excess of Λ‐ZnRL¹⁻³ or Δ‐ZnSL¹⁻³ in solution. DSC analysis reveals thermally induced irreversible phase transformation from a crystalline solid to an isotropic liquid phase. ECD spectra were reproduced by DFT geometry optimizations and time‐dependent DFT (TD‐DFT) calculations, providing ultimate proof of the dominant chirality atmetal in solution.     

Switch From Pauli‐Lowering to LUMO‐Lowering Catalysis in Brønsted Acid‐Catalyzed Aza‐Diels‐Alder Reactions

Brønsted acid‐catalyzed inverse‐electron demand (IED) aza‐Diels‐Alder reactions between 2‐aza‐dienes and ethylene were studied using quantum chemical calculations. The computed activation energy systematically decreases as the basic sites of the diene progressively become protonated. Our activation strain and Kohn‐Sham molecular orbital analyses traced the origin of this enhanced reactivity to i) “Pauli‐lowering catalysis” for mono‐protonated 2‐aza‐dienes due to the induction of an asynchronous, but still concerted, reaction pathway that reduces the Pauli repulsion between the reactants; and ii) “LUMO‐lowering catalysis” for multi‐protonated 2‐aza‐dienes due to their highly stabilized LUMO(s) and more concerted synchronous reaction path that facilitates more efficient orbital overlaps in IED interactions. In all, we illustrate how the novel concept of “Pauli‐lowering catalysis” can be overruled by the traditional concept of “LUMO‐lowering catalysis” when the degree of LUMO stabilization is extreme as in the case of multi‐protonated 2‐aza‐dienes.     

Impact of symmetry-breaking of non-fullerene acceptors for efficient and stable organic solar cells

The concurrent enhancement of short-circuit current (J_SC) and open-circuit voltage (V_OC) is a key problem in the preparation of efficient organic solar cells (OSCs). In this paper, we report efficient and stable OSCs based on an asymmetric non-fullerene acceptor (NFA) IPC-BEH-IC2F. The NFA consists of a weak electron-donor core dithienothiophen[3,2-b]-pyrrolobenzothiadiazole (BEH) and two kinds of strong electron-acceptor (A) units [9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) with a tricyclic fused system and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC2F)]. For comparison, the symmetric NFAs IPC-BEH-IPC and IC2F-BEH-IC2F were characterised. The kind of flanking A unit significantly affects the light absorption features and electronic structures of the NFAs. The asymmetric IPC-BEH-IC2F has the highest extinction coefficient among the three NFAs owing to its strong dipole moment and highly crystalline feature. Its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels lie between those of the IPC-BEH-IPC and IC2F-BEH-IC2F molecules. The IPC group also promotes molecular packing through the tricyclic π-conjugated system and achieves increased crystallinity compared to that of the IC2F group. Inverted-type photovoltaic devices based on p-type polymer:NFA blends with PBDB-T and PM6 polymers as p-type polymers were fabricated. Among all these devices, the PBDB-T:IPC-BEH-IC2F blend device displayed the best photovoltaic properties because the IPC unit provides balanced electronic and morphological characteristics. More importantly, the PBDB-T:IPC-BEH-IC2F-based device exhibited the best long-term stability owing to the strongly interacting IPC moiety and the densely packed PBDB-T:IPC-BEH-IC2F film. These results demonstrate that asymmetric structural modifications of NFAs are an effective way for simultaneously improving the photovoltaic performance and stability of OSCs.

A 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) moiety in asymmetric non-fullerene acceptors promotes the formation of a densely packed crystalline structure, enabling efficient and long-term stable organic solar cells.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

1,2σ3λ3-Oxaphosphetanes and Their P-Chalcogenides—A Combined Experimental and Theoretical Study

Although 1,2σ⁵λ⁵-oxaphosphetanes have been known for a long time, the “low-coordinate” 1,2σ³λ³-oxaphosphetanes have only been known since their first synthesis in 2018 via decomplexation. Apart from ligation of this P-heterocycle to gold(I)chloride and the oxidation using ortho-chloranil, nothing on their chemistry has been reported so far. Herein, we describe the synthesis of new 1,2σ³λ³-oxaphosphetane complexes (3a–e) and free derivatives (4a–e), as well as reactions of 4a with chalcogens and/or chalcogen transfer reagents, which yielded the P-chalcogenides (14–16a; Ch = O, S, Se). We also report on the theoretical results of the reaction pathways of C-phenyl-substituted 1,2 σ³λ³-oxaphosphetanes and ring strain energies of 1,2σ⁴λ⁵-oxaphosphetane P-chalcogenides.     

Insight into the strong aggregation-induced emission of low-conjugated racemic C6-unsubstituted tetrahydropyrimidines through crystal-structure–property relationship of polymorphs

Racemic C6-unsubstituted tetrahydropyrimidines (THPs) are a series of fluorophores with a strong aggregation-induced emission (AIE) effect. However, they do not possess the structural features of conventional AIE compounds. In order to understand their AIE mechanism, here, the influences of the molecular packing mode and the conformation on the optical properties of THPs were investigated using seven crystalline polymorphs of three THPs (1–3). The racemic THPs 1–3 have low-conjugated and highly flexible molecular structures, and hence show practically no emission in different organic solvents. However, the fluorescence quantum yields of their polymorphs are up to 93%, and the maximum excitation (λ _ex) and emission (λ _em) wavelengths of the polymorphs are long at 409 and 484 nm, respectively. Single-crystal structures and theoretical calculation of the HOMOs and LUMOs based on the molecular conformations of these polymorphs indicate that the polymorphs with the shortest λ _ex and λ _em values possess a RS-packing mode (R- and S-enantiomers self-assemble as paired anti-parallel lines) and a more twisted conformation without through-space conjugation between the dicarboxylates, but the polymorphs with longer λ _ex and λ _em values adopt a RR/SS-packing mode (R- and S-enantiomers self-assemble as unpaired zigzag lines) and a less twisted conformation with through-space conjugation between the dicarboxylates. The molecular conformations of 1–3 in all these polymorphs are stereo and more twisted than those in solution. Although 1–3 are poorly conjugated, the radiative rate constants (k _r) of their polymorphs are as large as conventional fluorophores (0.41–1.03 × 10⁸ s^–1) because of improved electronic conjugation by both through-bond and through-space interactions. Based on the obtained results, it can be deduced that the strong AIE arises not only from the restriction of intramolecular motion but also from enhanced electronic coupling and radiatively-favored inter-crossed local excitation (LE) and intramolecular charge transfer (ICT) excitation states. The abnormal molecular structures, easily-controllable self-assembly of the R- and S-enantiomers, and the strong AIE effect make THPs very useful fluorophores for applications and theoretical research.     

Red aqueous room-temperature phosphorescence modulated by anion–π and intermolecular electronic coupling interactions

Aqueous room temperature phosphorescence (aRTP) from purely organic materials has been intriguing but challenging. In this article, we demonstrated that the red aRTP emission of 2Br–NDI, a water-soluble 4,9-dibromonaphthalene diimide derivative as a chloride salt, could be modulated by anion–π and intermolecular electronic coupling interactions in water. Specifically, the rarely reported stabilization of anion–π interactions in water between Cl⁻ and the 2Br–NDI core was experimentally evidenced by an anion–π induced long-lived emission (λ_Anion–π) of 2Br–NDI, acting as a competitive decay pathway against the intrinsic red aRTP emission (λ_Phos) of 2Br–NDI. In the initial expectation of enhancing the aRTP of 2Br–NDI by inclusion complexation with macrocyclic cucurbit[n]urils (CB[n]s, n = 7, 8, 10), we surprisingly found that the exclusion complexation between CB[8] and 2Br–NDI unconventionally endowed the complex with the strongest and longest-lived aRTP due to the strong intermolecular electronic coupling between the nπ* orbit on the carbonyl rims of CB[8] and the ππ* orbit on 2Br–NDI in water. It is anticipated that these intriguing findings may inspire and expand the exploration of aqueous anion–π recognition and CB[n]-based aRTP materials.

The aqueous room temperature phosphorescence of 2Br–NDI is modulated by long-lived-emitting anion–π interactions and tremendously enhanced by intermolecular electronic coupling interactions with the ISC-boosting carbonyl rims of CB[8] host.     

Linear Multiselenium Interactions in Dicationic Oligomers of 1,5‐(Diselena)canes: Behavior of Semc σ(mcc‐nee) (6≤mc≤16) Elucidated with QTAIM Dual Functional Analysis

Invited for this month''s cover picture is the group of Dr. Satoko Hayashi at Faculty of Systems Engineering and Chemistry at Wakayama University. The cover picture shows the linear Se₁₆ σ(16c–30e) interactions, illustrated by the molecular graph type on the optimized structure of the dicationic octamer of 1,5‐(diselena)cane. HOMO‐1 of ψ₄₆₂ is drawn on the structure, which is located predominantly on the Se atoms. The optimized structure is stable, due to the nice engagement between the (CH₂)₃ moieties. The contour maps of ρ(r) are also drawn on the molecular C _s planes of the dicationic dimer and trimer to demonstrate clearly the existence of the interactions between Se atoms. Read the full text of their Full Paper at 10.1002/open.202100017.

“… To improve the causality of experimental results, we have proposed a new concept, called “Keisan‐sendo…” Find out more about the story behind the front cover research at 10.1002/open.202100017.     

Exploring benzylic gem-C(sp3)–boron–silicon and boron–tin centers as a synthetic platform

A stepwise build-up of multi-substituted C_sp³ carbon centers is an attractive, conceptually simple, but often synthetically challenging type of disconnection. To this end, this report describes how gem-α,α-dimetalloid-substituted benzylic reagents bearing boron/silicon or boron/tin substituent sets are an excellent stepping stone towards diverse substitution patterns. These gem-dimetalloids were readily accessed, either by known carbenoid insertion into C–B bonds or by the newly developed scalable deprotonation/metallation approach. Highly chemoselective transformations of either the C–Si (or C–Sn) or the C–B bonds in the newly formed gem-C_sp³ centers have been achieved through a set of approaches, with a particular focus on exploiting the synthetically versatile polarity reversal in organometalloids by λ³-aryliodanes. Of particular note is the metal-free arylation of the C–Si (or C–Sn) bonds in such gem-dimetalloids via the iodane-guided C–H coupling approach. DFT calculations show that this transfer of the (α-Bpin)benzyl group proceeds via unusual [5,5]-sigmatropic rearrangement and is driven by the high-energy iodine(iii) center. As a complementary tool, the gem-dimetalloid C–B bond is shown to undergo a potent and chemoselective Suzuki–Miyaura arylation with diverse Ar–Cl, thanks to the development of the reactive gem-α,α-silyl/BF₃K building blocks.

This work explores divergent reactivity of the benzylic gem-boron–silicon and boron–tin double nucleophiles, including the arylation of the C–B bond with Ar–Cl, along with a complementary oxidative λ³-iodane-guided arylation of the C–Si/Sn moiety.     

MIL‐100(Fe) Supported Pt−Co Nanoparticles as Active and Selective Heterogeneous Catalysts for Hydrogenation of 1,3‐Butadiene

Superior catalytic performance for selective 1,3‐butadiene (1,3‐BD) hydrogenation can usually be achieved with supported bimetallic catalysts. In this work, Pt−Co nanoparticles and Pt nanoparticles supported on metal–organic framework MIL‐100(Fe) catalysts (MIL=Materials of Institut Lavoisier, PtCo/MIL‐100(Fe) and Pt/MIL‐100(Fe)) were synthesized via a simple impregnation reduction method, and their catalytic performance was investigated for the hydrogenation of 1,3‐BD. Pt1Co1/MIL‐100(Fe) presented better catalytic performance than Pt/MIL‐100(Fe), with significantly enhanced total butene selectivity. Moreover, the secondary hydrogenation of butenes was effectively inhibited after doping with Co. The Pt1Co1/MIL‐100(Fe) catalyst displayed good stability in the 1,3‐BD hydrogenation reaction. No significant catalyst deactivation was observed during 9 h of hydrogenation, but its catalytic activity gradually reduces for the next 17 h. Carbon deposition on Pt1Co1/MIL‐100(Fe) is the reason for its deactivation in 1,3‐BD hydrogenation reaction. The spent Pt1Co1/MIL‐100(Fe) catalyst could be regenerated at 200 °C, and regenerated catalysts displayed the similar 1,3‐BD conversion and butene selectivity with fresh catalysts. Moreover, the rate‐determining step of this reaction was hydrogen dissociation. The outstanding activity and total butene selectivity of the Pt1Co1/MIL‐100(Fe) catalyst illustrate that Pt−Co bimetallic catalysts are an ideal alternative for replacing mono‐noble‐metal‐based catalysts in selective 1,3‐BD hydrogenation reactions.     

Facile Synthesis of 5-Aryl-N-(pyrazin-2-yl)thiophene-2-carboxamides via Suzuki Cross-Coupling Reactions,Their Electronic and Nonlinear Optical Properties through DFT Calculations

Synthesis of 5-aryl-N-(pyrazin-2-yl)thiophene-2-carboxamides (4a–4n) by a Suzuki cross-coupling reaction of 5-bromo-N-(pyrazin-2-yl)thiophene-2-carboxamide (3) with various aryl/heteroaryl boronic acids/pinacol esters was observed in this article. The intermediate compound 3 was prepared by condensation of pyrazin-2-amine (1) with 5-bromothiophene-2-carboxylic acid (2) mediated by TiCl₄. The target pyrazine analogs (4a–4n) were confirmed by NMR and mass spectrometry. In DFT calculation of target molecules, several reactivity parameters like FMOs (E_HOMO, E_LUMO), HOMO–LUMO energy gap, electron affinity (A), ionization energy (I), electrophilicity index (ω), chemical softness (σ) and chemical hardness (η) were considered and discussed. Effect of various substituents was observed on values of the HOMO–LUMO energy gap and hyperpolarizability. The p-electronic delocalization extended over pyrazine, benzene and thiophene was examined in studying the NLO behavior. The chemical shifts of ¹H NMR of all the synthesized compounds 4a–4n were calculated and compared with the experimental values.     

Benzothiadiazole vs. iso-Benzothiadiazole: Synthesis,Electrochemical and Optical Properties of D–A–D Conjugated Molecules Based on Them

This paper presents an improved synthesis of 4,7-dibromobenzo[d][1,2,3]thiadiazole from commercially available reagents. According to quantum-mechanical calculations, benzo[d][1,2,3]thiadiazole (isoBTD) has higher values of E_LUMO and energy band gap (E_g), which indicates high electron conductivity, occurring due to the high stability of the molecule in the excited state. We studied the cross-coupling reactions of this dibromide and found that the highest yields of π-spacer–acceptor–π-spacer type compounds were obtained by means of the Stille reaction. Therefore, 6 new structures of this type have been synthesized. A detailed study of the optical and electrochemical properties of the obtained π-spacer–acceptor–π-spacer type compounds in comparison with isomeric structures based on benzo[c][1,2,5]thiadiazole (BTD) showed a red shift of absorption maxima with lower absorptive and luminescent capacity. However, the addition of the 2,2′-bithiophene fragment as a π-spacer resulted in an unexpected increase of the extinction coefficient in the UV/vis spectra along with a blue shift of both absorption maxima for the isoBTD-based compound as compared to the BTD-based compound. Thus, a thorough selection of components in the designing of appropriate compounds with benzo[d][1,2,3]thiadiazole as an internal acceptor can lead to promising photovoltaic materials.     

Polycyclic aromatic hydrocarbon-substituted push–pull chromophores: an investigation of optoelectronic and nonlinear optical properties using experimental and theoretical approaches

A series of new push–pull chromophores were synthesized in moderate to very high yields (65%–97%) by treating TCNE and TCNQ with alkynes substituted by electron-rich diethylaniline and polycyclic aromatic hydrocarbons. Some of the chromophores exhibit strong intramolecular charge-transfer bands in the near-IR region with λ_max values between 695 and 749 nm. With the help of experimental and theoretical analysis, it is concluded that the trend in λ _max values is affected by PAH substituents sterically, not electronically. Steric constraints led to the increased dihedral angles, reducing conjugation efficiencies. The absorption properties of push-pull compounds have been investigated in solvents possessing different polarities. All chromophores exhibited positive solvatochromism. As an additional proof of efficient charge-transfer in push–pull chromophores, quinoid character (dr) values were predicted using calculated bond lengths. Remarkably, substantial dr values (0.045–0.049) were predicted for donor diethylaniline rings in all compounds. The effects of various polycyclic aromatic hydrocarbons on optical and nonlinear optical properties were also studied by computational methods. Several parameters, such as band gaps, Mulliken electronegativity, chemical hardness and softness, dipole moments, average polarizability, first hyperpolarizability, were predicted for chromophores at the B3LYP/6-31++G(d,p) level of theory. The predicted first hyperpolarizability β_(tot) values vary between 198 to 538 × 10^–30 esu for the reported push–pull chromophores in this study. The highest predicted β_(tot) value in this study is 537.842 × 10^–30 esu, 8150 times larger than the predicted β_(tot) value of benchmark NLO material urea, suggests possible utilization of these chromophores in NLO devices. The charge-transfer character of the synthesized structures was further confirmed by HOMO-LUMO depictions and electrostatic potential maps.     

Cinnamide Derivatives of d‐Mannose as Inhibitors of the Bacterial Virulence Factor LecB from Pseudomonas aeruginosa

Pseudomonas aeruginosa is an opportunistic Gram‐negative pathogen with high antibiotic resistance. Its lectin LecB was identified as a virulence factor and is relevant in bacterial adhesion and biofilm formation. Inhibition of LecB with carbohydrate‐based ligands results in a decrease in toxicity and biofilm formation. We recently discovered two classes of potent drug‐like glycomimetic inhibitors, that is, sulfonamides and cinnamides of d‐mannose. Here, we describe the chemical synthesis and biochemical evaluation of more than 20 derivatives with increased potency compared to the unsubstituted cinnamide. The structure–activity relationship (SAR) obtained and the extended biophysical characterization allowed the experimental determination of the binding mode of these cinnamides with LecB. The established surface binding mode now allows future rational structure‐based drug design. Importantly, all glycomimetics tested showed extended receptor residence times with half‐lives in the 5–20 min range, a prerequisite for therapeutic application. Thus, the glycomimetics described here provide an excellent basis for future development of anti‐infectives against this multidrug‐resistant pathogen.     

A highly emissive AIE-active luminophore exhibiting deep-red to near-infrared piezochromism and high-quality lasing

Further development of high-efficiency and low-cost organic fluorescent materials is intrinsically hampered by the energy gap law and spin statistics, especially in the near-infrared (NIR) region. Here we design a novel building block with aggregation-induced emission (AIE) activity for realizing highly efficient luminophores covering the deep-red and NIR region, which originates from an increase in the orbital overlap and electron-withdrawing ability. An organic donor–acceptor molecule (BPMT) with the building block is prepared and can readily form J-type molecular columns with multiple C–H⋯N/O interactions. Notably, such synthesized materials can emit fluorescence centered at 701 nm with extremely high photoluminescence quantum yields (PLQYs) of 48.7%. Experimental and theoretical investigations reveal that the formation of the hybridized local and charge-transfer (HLCT) state and substantial C–H⋯N/O interactions contribute to a fast radiative decay rate and a slow nonradiative decay rate, respectively, resulting in high PLQYs in the solid state covering the NIR range. Remarkably, such BPMT crystals, as a first example, reveal strong-penetrability piezochromism along with a distinct PL change from the deep-red (λ_max = 704 nm) to NIR (λ_max = 821 nm) region. Moreover, such typical AIE-active luminophores are demonstrated to be a good candidate as a lasing medium. Together with epoxy resin by a self-assembly method, a microlaser is successfully illustrated with a lasing wavelength of 735.2 nm at a threshold of 22.3 kW cm⁻². These results provide a promising approach to extend the contents of deep-red/NIR luminophores and open a new avenue to enable applications ranging from chemical sensing to lasing.

A HLCT-type luminophore is prepared with bright deep-red fluorescence, showing high-performance piezochromism and lasing.     

Intrinsic Dynamic and Static Nature of Halogen Bonding in Neutral Polybromine Clusters,with the Structural Feature Elucidated by QTAIM Dual-Functional Analysis and MO Calculations

The intrinsic dynamic and static nature of noncovalent Br-∗-Br interactions in neutral polybromine clusters is elucidated for Br₄–Br₁₂, applying QTAIM dual-functional analysis (QTAIM-DFA). The asterisk (∗) emphasizes the existence of the bond critical point (BCP) on the interaction in question. Data from the fully optimized structures correspond to the static nature of the interactions. The intrinsic dynamic nature originates from those of the perturbed structures generated using the coordinates derived from the compliance constants for the interactions and the fully optimized structures. The noncovalent Br-∗-Br interactions in the L-shaped clusters of the C_s symmetry are predicted to have the typical hydrogen bond nature without covalency, although the first ones in the sequences have the vdW nature. The L-shaped clusters are stabilized by the n(Br)→σ*(Br–Br) interactions. The compliance constants for the corresponding noncovalent interactions are strongly correlated to the E(2) values based on NBO. Indeed, the MO energies seem not to contribute to stabilizing Br₄ (C_2h) and Br₄ (D_2d), but the core potentials stabilize them, relative to the case of 2Br₂; this is possibly due to the reduced nuclear–electron distances, on average, for the dimers.     

One‐Pot Synthesis of 2,5‐Furandicarboxylic Acid from 2‐Furoic Acid by a Pd‐catalyzed Bromination–Hydroxycarbonylation Tandem Reaction in Acetate Buffer

The one‐pot synthesis of 2,5‐furandicarboxylic acid from 2‐furoic acid with a yield of 57 % was achieved for the first time using a Pd‐catalyzed bromination‐hydroxycarbonylation tandem reaction in HOAc‐NaOAc buffer. This synthetic protocol shows major improvements compared to previously reported methods, such as using biomass‐based 2‐furoic acid as low‐cost raw material, one‐pot synthesis without isolation of intermediate products, and no need for an acidification procedure. Experiments indicate that the involved Xantphos‐modified Pd‐catalyst and the buffer solution play significant promoting roles for each individual reaction whereas Br₂ (as the brominating reagent) had a negative effect on the second hydroxycarbonylation step, while CO was deleterious for the first bromination step. Hence, in this practical one‐pot synthesis, Br₂ should be consumed in the first bromination step as fully as possible, and CO is introduced after the first bromination step has been completed.     

Hydrogenation of β-Keto Sulfones to β-Hydroxy Sulfones with Alkyl Aluminum Compounds: Structure of Intermediate Hydroalumination Products

β-Hydroxy sulfones are important in organic synthesis. The simplest method of β-hydroxy sulfones synthesis is the hydrogenation of β-keto sulfones. Herein, we report the reducing properties of alkyl aluminum compounds R₃Al (R = Et, i-Bu, n-Bu, t-Bu and n-Hex); i-Bu₂AlH; Et₂AlCl and EtAlCl₂ in the hydrogenation of β-keto sulfones. The compounds i-Bu₂AlH, i-Bu₃Al and Et₃Al are the at best reducing agents of β-keto sulfones to β-hydroxy sulfones. In reactions of β-keto sulfones with aluminum trialkyls, hydroalumination products with β-hydroxy sulfone ligands [R₂AlOC(C₆H₅)CH₂S(O)₂(p-R¹C₆H₄]_n [where n = 1,2; 2aa: R = i-Bu, R¹ = CH₃; 2ab: R = i-Bu, R¹ = Cl; 2ba: R = Et, R¹ = CH₃; 2bb: R = Et, R¹ = Cl] and {[Et₂AlOC(C₆H₅)CH₂S(O)₂(p-ClC₆H₄]∙Et₃Al}_n 3bb were obtained. These complexes in the solid state have a dimeric structure, while in solutions, they appear as equilibrium monomer–dimer mixtures. The hydrolysis of both the isolated 2aa, 2ab, 2ba, 2bb and 3bb and the postreaction mixtures quantitatively leads to pure racemic β-hydroxy sulfones. Hydroalumination reaction of β-keto sulfones with alkyl aluminum compounds and subsequent hydrolysis of the complexes is a simple and very efficient method of β-hydroxy sulfones synthesis.     

Molecular control over vitrimer-like mechanics – tuneable dynamic motifs based on the Hammett equation in polyimine materials

In this work, we demonstrate that fine-grained, quantitative control over macroscopic dynamic material properties can be achieved using the Hammett equation in tuneable dynamic covalent polyimine materials. Via this established physical-organic principle, operating on the molecular level, one can fine-tune and control the dynamic material properties on the macroscopic level, by systematic variation of dynamic covalent bond dynamics through selection of the appropriate substituent of the aromatic imine building blocks. Five tuneable, crosslinked polyimine network materials, derived from dianiline monomers with varying Hammett parameter (σ) were studied by rheology, revealing a distinct correlation between the σ value and a range of corresponding dynamic material properties. Firstly, the linear correlation of the kinetic activation energy (E_a) for the imine exchange to the σ value, enabled us to tune the E_a from 16 to 85 kJ mol⁻¹. Furthermore, the creep behaviour (γ), glass transition (T_g) and the topology freezing transition temperature (T_v), all showed a strong, often linear, dependence on the σ value of the dianiline monomer. These combined results demonstrate for the first time how dynamic material properties can be directly tuned and designed in a quantitative – and therefore predictable – manner through correlations based on the Hammett equation. Moreover, the polyimine materials were found to be strong elastic rubbers (G′ > 1 MPa at room temperature) that were stable up to 300 °C, as confirmed by TGA. Lastly, the dynamic nature of the imine bond enabled not only recycling, but also intrinsic self-healing of the materials over multiple cycles without the need for solvent, catalysts or addition of external chemicals.

Controlling macroscopic material properties of dynamic covalent polyimines via the electronic effect of dianiline monomers based on the Hammett equation.     

Deep-Red and Near-Infrared Iridium Complexes with Fine-Tuned Emission Colors by Adjusting Trifluoromethyl Substitution on Cyclometalated Ligands Combined with Matched Ancillary Ligands for Highly Efficient Phosphorescent Organic Light-Emitting Diodes

Six novel Ir(C^N)₂(L^X)-type heteroleptic iridium complexes with deep-red and near-infrared region (NIR)-emitting coverage were constructed through the cross matching of various cyclometalating (C^N) and ancillary (LX) ligands. Here, three novel C^N ligands were designed by introducing the electron-withdrawing group CF₃ on the ortho (o-), meta (m-), and para (p-) positions of the phenyl ring in the 1-phenylisoquinoline (piq) group, which were combined with two electron-rich LX ligands (dipba and dipg), respectively, leading to subsequent iridium complexes with gradually changing emission colors from deep red (≈660 nm) to NIR (≈700 nm). Moreover, a series of phosphorescent organic light-emitting diodes (PhOLEDs) were fabricated by employing these phosphors as dopant emitters with two doping concentrations, 5% and 10%, respectively. They exhibited efficient electroluminescence (EL) with significantly high EQE values: >15.0% for deep red light0 (λ_max = 664 nm) and >4.0% for NIR cases (λ_max = 704 nm) at a high luminance level of 100 cd m⁻². This work not only provides a promising approach for finely tuning the emission color of red phosphors via the easily accessible molecular design strategy, but also enables the establishment of an effective method for enriching phosphorescent-emitting molecules for practical applications, especially in the deep-red and near-infrared region (NIR).