Isomorphic substitution of neodymium and gadolinium for calcium in synthetic hydroxovanadate

Isomorphic substitution of neodymium and gadolinium for calcium in synthetic hydroxovanadate Ca_{5 ? x} M _x (VO₄)₃(OH)_{1 ? x} O _x (M = Nd, Gd) is studied in the range 700–1000°C using X-ray powder diffraction, single-crystal X-ray diffraction (Rietveld technique), and IR spectroscopy. Single-phase solid solutions at 800°C are formed with x ≤ 0.35 for M(III) = Nd and x ≤ 0.3 for M(III) = Gd. With high x, the apatite solid solution coexists with Ca₃(VO₄)₂, Nd₂O₃, and X phases. With increasing x in the homogeneous region, the intensity of the bands of stretching vibrations and librations of OH groups decrease. Single-crystal X-ray diffraction shows that neodymium and gadolinium substitute for calcium in solid solutions mostly in Ca(2) positions.     

Synthesis,structure, and thermal expansion of sodium zirconium arsenate phosphates

Sodium zirconium arsenate phosphates NaZr₂(AsO₄) _x (PO₄)_3?x were synthesized by precipitation technique and studied by X-ray diffraction and IR spectroscopy. In the series of NaZr₂(AsO₄) _x (PO₄)_3?x , continuous substitution solid solutions are formed (0 ≤ x ≤ 3) with the mineral kosnarite structure. The crystal structure of NaZr₂(AsO₄)_1.5(PO₄)_1.5 was refined by full-profile analysis: space group R \(\bar 3\) c, a = 8.9600(4)Å, c = 22.9770(9) Å, V = 1597.5(1) ų, R _wp = 4.55. The thermal expansion of the arsenate-phosphate NaZr₂(AsO₄)_1.5(PO₄)_1.5 and the arsenate NaZr₂(AsO₄)₃ was studied by thermal X-ray diffraction in the temperature range of 20–800°C. The average linear thermal expansion coefficients (α_av = 2.45 × 10^?6 and 3.91 × 10^?6 K^?1, respectively) indicate that these salts are medium expansion compounds.     

Some Structural Properties of the Mixed Lead–Magnesium Hydroxyapatites

Lead–magnesium hydroxyapatite solid solutions Pb_(10–x)Mg _x (PO₄)₆(OH)₂ have been prepared via a hydrothermal process. They were characterized by X-ray powder diffraction, Transmission Electron Microscopy (TEM), chemical and IR spectroscopic analyses. The results of the structural refinement indicated that the limits of lead-magnesium solid solutions (x ≤ 1.5), a regular decrease of the lattice constant a and a preferential magnesium distribution in site S(I). Through the progressive replacement of Pb²⁺ (r = 0.133 nm) by the smaller cation Mg²⁺ (r = 0.072 nm), all interatomic distances decrease in accordance with the decrease of the cell parameters. According to what could be expected from the coordinance of the metallic sites S(I) (hexacoordination) and S(II) (heptacoordination), the small magnesium cation preferentially occupies the four sites S(I). The results of the TEM analysis confirm the presence of magnesium in the starting solution and reveals the decrease in the average size of crystals. The IR spectra show the presence of the absorption bands characteristic for the apatite structure.     

Lead lanthanum and strontium lanthanum germanovanadates with apatite and oxyapatite structures

New compounds Pb₄La(GeO₄)₂(VO₄)(I) and Sr₅La₅(GeO₄)₅(VO₄)O(II) were prepared and identified. Compound I has the structure of apatite, a = 10.108(1) Å, c = 7.369(1) Å, V = 652.1(2) ų. Compound II has the structure of oxyapatite, a = 9.9028(5) Å, c = 7.3162(4) Å, V = 621.34(6) ų.     

Nanocrystalline Calcium Carbonate Hydroxyapatites Containing Multiwall Carbon Nanotubes: Synthesis and Physicochemical Characterization

Nanocomposites (NCs) based on carbonated calcium hydroxyapatite (CHA) (bioapatite, an analogue of the inorganic component of mammalian bone tissue), carbonate apatite (Ca₁₀(PO₄)₆CO₃, CA), and multiwall carbon nanotubes (CNTs) are prepared in the system CaCl₂–(NH₄)₂HPO₄–NH₄HCO₃–NH₃–CNT–H₂O (25°C) by coprecipitation of calcium and phosphorus salts with CNTs from aqueous solutions. The physicochemical properties of nanocomposites are studied as dependent on their formation conditions and composition using the solubility (residual concentrations) method and pH measurements. The composition, crystal structure, morphology, spectroscopic and thermal characteristics of the synthesized CHA/CNT and CA/CNT NCs are determined using chemical analysis, X-ray powder diffraction, thermal analysis, and IR spectroscopy. Either CHA/CNT NCs of composition Ca₁₀(PO₄)₆(CO₃)_x(OH)_2–2х · yCNT · zH₂O, where х = 0.2; 0.5; 0.8; y = 1, 2, 3; z = 6.8–10.8, or (when х = 1) CA/CNT NCs of composition Ca₁₀(PO₄)₆CO₃ · yCNT · zH₂O, where y = 1–3; z = 6.9–10.8, are formed as the carbonate and CNT contents of the NC increase. Our results favor the understanding of the effect of carbonization and CNTs on the metabolic formation of native bone tissue apatite and can be used for the design of efficient ceramics for bone implants.     

Synthesis,structure, and properties of M<Subscript>3</Subscript>VO<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript> (M = Rb,Cs)

Vanadium(V) complexes of general composition M₃VO₂(SO₄)₂ (M = Rb, Cs) were synthesized by a solid-state route. The individuality of the synthesized compounds was proved by X-ray and neutron diffraction, vibrational spectroscopy, and microscopic analysis. The X-ray diffraction patterns of M₃VO₂(SO₄)₂ were indexed to fit the monoclinic system (space group P2/c, Z = 4) with the following unit cell parameters: a = 11.6487(2) Å, b = 8.4469(2) Å, c = 12.1110(2) Å, β = 109.483(1)°, V = 1123.43 ų (Rb); a = 12.0546(3) Å b = 8.7706(2) Å, c = 12.6496(3) Å, β = 109.843(2)°, V = 1257.99 ų (Cs). In the crystal structure of M₃VO₂(SO₄)₂, [VO₂(SO₄)₂]^3? complex anions can be discerned in which the vanadium atom is surrounded by five oxygen atoms: two oxygen atoms form short terminal V–O bonds, and three oxygen atoms are from the two sulfato groups, one of which acts as a monodentate ligand and the other acts as a bidentate chelating ligand.     

Systems Li<Subscript>2</Subscript>O(Na<Subscript>2</Subscript>O)-CdO-V<Subscript>2</Subscript>O<Subscript>5</Subscript>: Phase composition and phase diagrams

The subsolidus phase composition of the M₂O-CdO-V₂O₅ systems with M = Li or Na is studied. Double orthovanadates MCdVO₄ and MCd₄(VO₄)₃ form solid solutions of composition Li_{1 ? 2x/3}Cd _x/3CdVO₄ (0 ≤ x ≤ 1, orthorhombic space group Cmcm, modulation at x = 0.6) and Na_{3 ? 2x} Cd_{3 + x} (VO₄)₃ (0 ≤ x ≤ 0.10 and 0.30 ≤ x ≤ 1, orthorhombic space group Cmcm and Pn2₁ a or Pnma, respectively). In the range 0.10 < x < 0.30, the end-members of the solid solutions coexist. Isothermal sections of the systems are mapped.     

Potassium decamolybdodiferrate(III): Synthesis and characterization

Potassium decamolybdodiferrate(III) of composition K₆[Fe₂Mo₁₀O₃₄(OH)₄] · 7H₂O (compound I) is synthesized and characterized by IR spectroscopy, thermogravimetry, and powder X-ray diffraction. The crystals of compound I are monoclinic with a = 9.7482 Å, b = 6.5663 Å, c = 7.8453 Å, β = 116.81°, V = 448.15 ų, ρ = 3.115 g/cm³.     

Tetramminenickel hydrogen hexamolybdometalates(III)

Tetramminenickel hydrogen hexamolybdoaluminate and hexamolybdogallate(III) of compositions [Ni(NH₃)₄] · H[AlMo₆O₁₈(OH)₆] · 10H₂O (I) and [Ni(NH₃)₄] · H[GaMo₆O₁₈(OH)₆] · 10H₂O (II) were synthesized and characterized by mass spectrometry, thermogravimetry, X-ray powder diffraction, and IR spectroscopy. Their crystals are triclinic. For compound I, a= 17.30 Å, b= 14.69 Å, c= 10.45 Å, α = 129.07, β = 65.91°, γ = 138.01°, V = 1338.7l ų, ρ_calcd = 2.75g/cm³, Z = 2; for compound II, a = 17.38 Å, b= 14.75 Å, c= 10.51 Å, α = 131.38°, β= 65.96°, γ = 138.09, V = 1338.15 ų, ρ_calcd = 2.68 g/cm³, Z = 2.     

A study of phase formation in the subsolidus region of the system Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MnMoO<Subscript>4</Subscript>-Cr<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Phase relationships in the subsolidus region of the system Na₂MoO₄-MnMoO₄-Cr₂(MoO₄)₃ were studied by means of X-ray diffraction and differential-thermal analyses. The possibility of obtaining a variablecomposition phase Na_1?x Mn_1?x Cr_1+x (MoO₄)₃ (0 ≤ x ≤ 0.5) and ternary molybdate NaMn₃Cr(MoO₄)₅ was examined. The temperature dependence of the conductivity of the phase Na_1?x Mn_1?x Cr_1+x (MoO₄)₃ was analyzed.     

Alkali (alkaline-earth) metal,aluminum, and titanium complex orthophosphates: Synthesis and characterization

Phase formation in the A_{1 + x} Al _x Ti_{2 ? x} P₃O₁₂ (A = Li, Na, K, Rb, or Cs; 0 ≤ x ≤ 2.0) and B_{0.5(l + x)}Al _x Ti_{2 ? x} P₃O₁₂ (B = Mg, Ca, Sr, or Ba; 0 ≤ x ≤ 2.0) systems was studied using X-ray powder diffraction, electron probe microanalysis, and IR spectroscopy. The following double and triple orthophosphates were found to exist: A_{1 + x} Al _x Ti_{2 ? x} (PO₄)₃ with A = Li (0 ≤ x ≤ 0.3), Na (0 ≤ x ≤ 1.0), K (x = 0, 1.0, or 2.0), Rb (x = 0, 1.0, or 2.0), or Cs (0 ≤ x ≤ 1.0) and B_{0.5(l + x)}Al _x Ti_{2 ? x} (PO₄)₃ with B = Mg and Ba (x = 0), Ca and Sr (0 ≤ x ≤ 0.2). These orthophosphates crystallize in the structure types of kosnarite, langbeinite, cesium titanium arsenate, potassium aluminum phosphate, or rubidium aluminum phosphate. Their crystal parameters were calculated. For CsTi₂(PO₄)₃ (x = 0), Rietveld refinement was carried out: space group Ia \(\bar 3\) d, Z = 32, a = 19.909(5) Å, V = 7892(1) ų. This compound has a framework structure. The framework is built of TiO₆ octahedra and PO₄ tetrahedra; eight- and 12-coordinated Cs⁺ cations populate interstices.     

New Phosphate-Sulfates with NZP Structure

NaZr_2–xB_x(PO₄)_3–2x(SO₄)_2x (0 ≤ x ≤ 1.25, B = Mg, Co, Ni, Cu, Zn), and NaZr_2–xR_x(PO₄)_3–x(SO₄)_x (0 ≤ x ≤ 1.25, R = Al, Fe) phosphate-sulfates series have been prepared by a sol–gel process. These compounds belong to the NaZr₂(PO₄)₃ (NZP) structure family and crystallize in hexagonal crystal system, space group R\(\bar 3\)c. Limited solid solution series were found to exist; their formation temperatures and thermal stability limits were determined. Particle sizes as determined by microstructure observation were 50–200 nm, and for Cu- and Zn-containing samples, 200–500 nm. The thermal expansion of phosphate-sulfate NaZr_1.25Cu_0.75(PO₄)_1.5(SO₄)_1.5 was studied in the range 25–700°C. Thermal expansion coefficients and thermal expansion anisotropy were found to be α_a =–5.40 × 10^–6 °C^–1, α_с = 18.88 × 10^–6 °C^–1, α_avg = 2.69 × 10^–6 °C^–1, and Δα = 24.28 × 10^–6 °C^–1.     

Synthesis and study of physicochemical properties of the magnesium heteropoly compound (NH<Subscript>4</Subscript>)<Subscript>4</Subscript>[MgMo<Subscript>6</Subscript>O<Subscript>18</Subscript>(OH)<Subscript>6</Subscript>] · 5H<Subscript>2</Subscript>O

The magnesium heteropoly compound (NH₄)₄[MgMo₆O₁₈(OH)₆] · 5H₂O (I) has been synthesized and studied by mass spectrometry, IR spectroscopy, X-ray powder diffraction, and thermogravimetry. Crystals of I are monoclinic, space group P2₁/n, a = 15.10 Å, b = 11.64 Å, c = 13.53 Å, β = 74.28°, V = 2289.31 ų, ρ_calc = 1.09 g/cm³, Z = 1.     

The effect of phosphate group replacement by sulfate groups on the phase formation in the synthesis of hydroxyapatite

Sulfate-substituted hydroxyapatite materials with a degree of substitution of up to 20 mol % (Ca₁₀(PO₄)_{(6 – 0.06x)}(SO₄)_0.09x (OH)₂, x = 0, 0.1, 0.5, 1, 5, 10, and 20) were synthesized. For substitutions of 0, 0.1, 0.5, and 1 mol %, a single-phase material with the apatite structure is formed. On further increase in the concentration of SO₄ ^2? groups up to 20 mol %, a second phase, CaSO₄, is formed; the amount of this phase increases for higher degrees of substitution. The unit cell parameters of hydroxyapatite-based materials change slightly upon the replacement of phosphate groups by sulfate groups: the parameter a tends to increase, while c tends to decrease. The introduction of sulfate groups results in decreasing particle size.     

Surface composition in perovskite-like cuprates as probed by X-ray photoelectron spectroscopy

Complex cuprates La_0.85Sr_0.15CuO_2.5?δ having an anion-deficient perovskite structure and La_2?x Sr _x CuO_4?δ (x = 0.15, 0.6, 1.0) having a K₂ NiF₄ layered structure have been prepared by ceramic technology. X-ray powder diffraction verified that single-phase samples were obtained. X-ray photoelectron spectroscopy (XPS) was used to determine the surface composition of compacted samples. It was found that both the photoionization cross-section and the photoelectron mean free path should be taken into account when calculating the surface composition. The surface was enriched in strontium as a result of segregation, regardless of the bulk composition of the cuprate sample.     

Solid solutions (Ru,Nb)Sr<Subscript>2</Subscript>(Sm<Subscript>1.4</Subscript>Ce<Subscript>0.6</Subscript>)Cu<Subscript>2</Subscript>O<Subscript>10−δ</Subscript>: Synthesis,structure, and properties

Solid solutions of as-batch composition (Ru_1?x Nb _x )Sr₂(Sm_1.4Ce_0.6)Cu₂O_10?δ (the Ru,Nb)-1222 phase), where x = 0.0, 0.25, 0.50, 0.75, or 1.00, have been synthesized and characterized by X-ray diffraction. A correlation is proposed between the refined composition of the Ru-1222 and Nb-1222 phases and their structural features. With increasing oxygen concentration in the Ru-1222 phase, the superconducting transition temperature increases from T _c = 28 to T _c = 34 K. The composition and magnetic properties of the Ru-1222 phase are affected by the batch composition: unlike in Ru + RuO₂ mixtures, the presence of ruthenium in the batch decreases the oxygen proportion and increases the magnetic ordering temperature T _m; the phase of as-batch composition NbSr₂(Sm_1.4Ce_0.6)Cu₂O_10?δ is paramagnetic.     

Synthesis,properties, and molecular and crystal structure of diantipyrylmethanium Bis(μ-tartrato)dihydroxydigermanate(IV) tetrahydrate (HDAm)<Subscript>2</Subscript>[Ge<Subscript>2</Subscript>(μ-L)<Subscript>2</Subscript>(OH)<Subscript>2</Subscript>] · 4H<Subscript>2</Subscript>O

The complex (HDam)₂[Ge₂(μ-L)₂(OH)₂] · 4H₂O (I) (H₄L is tartaric acid, Dam is diantipyrylmethane) was synthesized for the first time. The individual character and composition of I was established by elemental analysis and X-ray diffraction. The thermal stability of I was studied. The coordination sites of H₄L in the germanium complex were determined by IR spectroscopy. The structure of I was determined by X-ray crystallography. The crystals of I are triclinic: a = 9.3098(10) Å, b = 9.8088(10) Å, c = 17.6869(10) Å, α = 84.009(10)°, β = 77.926(10)°, γ = 67.088(5)°, V = 1454.3(2) ų, Z = 2, space group P \(\bar 1\), R = 0.0628 for 6343 reflections with I > 2σ(I). The compound is composed of the complex anions [Ge₂(μ-L)₂(OH)₂]^2?, the HDam⁺ cations, and crystal water molecules. In the dimeric anion, the metal atoms are bound to two completely deprotonated ligands L^4?. The latter are coordinated to the metal through the carboxyl (av. Ge-O, 1.911(6) Å) and hydroxyl (av. Ge-O, 1.768(6) Å) oxygen atoms. The coordination of each Ge atom is completed to trigonalbipyramidal by the O atom of the hydroxy ligand in the axial position (av. Ge-O, 1.748(7) Å). Both L^4? ligands are D isomers. In the crystal, the complex anions and crystal water molecules are combined by a system of hydrogen bonds.     

LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> and LiCoO<Subscript>2</Subscript> composite cathode materials obtained by mechanical activation

New composite cathode materials xLiMn₂O₄/(1 ? x) LiCoO₂(x = 0.7, 0.6, 0.5 и 0.4) were obtained by mechanical activation. According to scanning electron microscopy data, the process was accompanied by pronounced dispersion and fine mixing of the initial components. In the course of the preparation and electrochemical cycling of the composites, LiMn₂O₄ and LiCoO₂ partially reacted, leading to the replacement of manganese with cobalt in the structure of spinel, which was detected by powder X-ray diffraction (XRD), IR and X-ray photoelectron spectroscopy (XPS), and cyclic chronopotentiometry. The specific discharge capacity of composites was ～100 mAh/g.     

Methanol transformations on framework lithium zirconium vanadate phosphates

The catalytic activity of framework phosphates of the general formula LiZr₂(VO₄)_x(PO₄)_3–x with different degrees of phosphorus replacement (x = 0, 0.1, 0.3, 0.4, 0.6, and 0.8) was studied in methanol transformations in an inert atmosphere. It was shown that the ratio between the activity and selectivity of the catalysts in dehydration and dehydrogenation reactions is determined by their vanadium content and the process temperature.     

Two novel dinuclear iron(III) complexes containing <Emphasis Type="Italic">μ</Emphasis>-oxo-di-<Emphasis Type="Italic">μ</Emphasis>-carboxylato motif

Two novel μ-oxo-di-μ-carboxylato-bridged iron(III) complexes of [Fe₂(bpea)₂(PhCO₂)₂(μ-O)] (ClO₄)₂·C₂H₅OH (1) and [Fe₂(bpma)₂(ClCH₂COO)₂(μ-O)](ClO₄)₂· H₂O (2) (bpea = N,N-bis(2-pyridylmethyl)ethylamine, bpma = N,N-bis(2-pyridylmethyl)methylamine), have been synthesized and determined by X-ray diffraction. Complex (1) crystallizes in the Orthorhombic space group P _nma with d(Fe···Fe) of 3.094 Å and average d(Fe–Ob_bridge) of 1.805 Å; Complex (2) crystallizes in the Monoclinic space group C ₂/c, with d(Fe···Fe) of 3.109 Å and average d(Fe–Ob_bridge) of 1.794 Å. The magnetic studies indicate a stronger antiferromagnetic interaction between iron(III) ions through μ-oxo-di-μ-carboxylato-bridge for complex (1), with J = ? 141.6 cm^?1.