Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Synthesis and reactions of heterodinuclear organopalladium–cobalt complexes acting as copolymerization catalyst for aziridine and carbon monoxide

A series of heterodinuclear acylpalladium–cobalt complexes having a bidentate nitrogen ligand, L₂(RCO)Pd–Co(CO)₄ (L₂ = bpy, R = Me (5), Ph (6); L₂ = tmeda, R = Me (7), Ph (8); L₂ = phen, R = Me (9), Ph (10)) are prepared by metathetical reactions of PdRIL₂ with Na⁺[Co(CO)₄]⁻ followed by treatment with CO. These complexes are characterized by NMR and IR spectroscopies and elemental analyses, and the molecular structures of 6, 8, and 9 are determined by X-ray structure analysis. Geometry at Pd is essentially square planar and the Co atom is considered to have d¹⁰ tetrahedral structure, where cobalt(-I) anion coordinates to palladium(II) cation. Heterodinuclear organopalladium–cobalt complexes are shown to catalyze copolymerization of aziridines and CO under mild conditions. Reaction of (dppe)MePd–Co(CO)₄ (1) with aziridine gives a cationic (aziridine)palladium(II) complex with [Co(CO)₄]⁻ anion, [PdMe(aziridine)(dppe)]⁺[Co(CO)₄]⁻ (13).     

Dinuclear ruthenium(I) complexes of the type [Ru2(CO)4L2] with carboxylate or 2-pyridonate ligands: Evaluation as catalysts for olefin cyclopropanation with diazoacetates

Dinuclear ruthenium(I,I) carboxylate complexes [Ru₂(CO)₄(μ-OOCR)₂]_n (R = CH₃ (1a), C₃H₇ (1b), H (1c), CF₃ (1d)) and 2-pyridonate complex [Ru₂(CO)₄(μ-2-pyridonate)₂]_n (3) catalyze efficiently the cyclopropanation of alkenes with methyl diazoacetate. High yields are obtained with terminal nucleophilic alkenes (styrene, ethyl vinyl ether, α-methylstyrene), medium yields with 1-hexene, cyclohexene, 4,5-dihydrofuran and 2-methyl-2-butene. The E-selectivity of the cyclopropanes obtained from the monosubstituted alkenes and the cycloalkenes decreases in the order 1b > 1a > 1d > 1c. The cyclopropanation of 2-methyl-2-butene is highly syn-selective. Several complexes of the type [Ru₂(CO)₄(μ-L¹)₂]₂ (4) and (5), [Ru₂(CO)₄(μ-L¹)₂L²] (L² = CH₃OH, PPh₃) (6)–(9) and [Ru₂(CO)₄(CH₃CN)₂(μ-L¹)₂] (10) and (11), where L¹ is a 6-chloro- or 6-bromo-2-pyridonate ligand, are also efficient catalysts. Compared with catalyst 3, a halogen substituent at the pyridonate ligand affects the diastereoselectivity of cyclopropanation only slightly.     

Carbonyl rhodium(I) complexes containing (H)PNX (X = O or N) ligands deriving from natural aminoacid–amides. Synthesis, X-ray structure and spectroscopic characterization

The polyfunctional (H)PNX (X = O or N) ligands 1 and 2 react with [Rh(CO)₂Cl]₂ to give the corresponding chloro carbonyl complexes {Rh[κ²-(H)PN](CO)Cl} (1a and 2a), where the neutral ligands coordinate in a κ²-PN bidentate fashion, the square planar coordination being completed by the CO trans to N and the chloride trans to P. In chloroform solution 1a maintains its original structure, while 2a partially transforms into the cationic species {Rh[κ³-(H)PNO](CO)}Cl. The chloroform solutions of 1a and 2a react with AgPF₆ to give the purely cationic species {Rh[κ³-(H)PNO](CO)}PF₆ ([1a]⁺ and [2a]⁺), while addition of Et₃N originates the neutral species {Rh[κ³-PNN′](CO)} (1b and 2b). All the complexes have been characterized by microanalysis, IR, ¹H NMR as well as ³¹P{¹H} NMR spectroscopy. The X-ray structures of ligand 1 and complex 1b are also reported.     

Controlling the dimensionality of oxalate-based bimetallic complexes: The ferromagnetic chain {[K(18-crown-6)][Mn(bpy)Cr(ox)3]}∞(18-crown-6 = C12H24O6, ox=C2O42-, bpy = C10H8N2)

The bimetallic ferromagnetic chain {[K(18-crown-6)][Mn(bpy)Cr(ox)₃]}_∞ (1) has been synthesized and characterized. It crystallizes in the orthorhombic chiral space group P2₁2₁2₁ [a = 9.0510(2) Å, b = 14.4710(3) Å, c = 26.8660(8) Å, V = 3510.97(1) Å³, Z = 2]. Compound 1 is made up by anionic [Mn(bpy)Cr(ox)₃]⁻ 1D chains and cationic [K(18-crown-6)]⁺ complexes. The magnetic exchange within the chain is ferromagnetic [J = +7.8(7) cm⁻¹]. In the solid state, the ferromagnetic chains are well isolated magnetically and no long range magnetic ordering has been observed above 2 K.     

Enantioselective 1,4-addition of arylboronic acids to α,β-unsaturated carbonyl compounds catalyzed by rhodium(I)-chiral phosphoramidite complexes

A chiral bidentate phosphoramidite (5a) was synthesized from Shibasaki’s linked-(R)-BINOL and P(NMe₂)₃ as a new ligand for rhodium(I)-catalyzed asymmetric 1,4-addition of arylboronic acids to α,β-unsaturated carbonyl compounds. The effects of 5a and Feringa’s monodentate phosphoramidite (4, R¹, R² = Et) on the yields and enantioselectivities were fully investigated. The reaction was significantly accelerated in the presence of a base such as KOH and Et₃N, allowing the reaction to be completed at the lower temperatures than 50 °C. The addition to cyclic enones such as 2-cyclopentenone, 2-cyclohexenone and 2-cycloheptenone at 50 °C in the presence of an [Rh(coe)₂Cl]₂-4 (R¹, R² = Et) complex resulted in enantioselectivities up to 98%, though it was less effective for acyclic enones (0–70% ee). On the other hand, a complex between [Rh(nbd)₂]BF₄ and 5a completed the addition to cyclic enones within 2 h at room temperature in the presence of Et₃N with 86–99% yields and 96–99.8% ee. This catalyst was also effective for acyclic enones, resulting in 62–98% yields and 66–94% ee. The 1,4-additions of arylboronic acids to unsaturated lactones and acyclic esters with rhodium(I)-phosphoramidites complexes were also investigated.     

Cyclic (alkyl)(amino)carbene gold(I) complexes: A synthetic and structural investigation

A series of mono- and dicarbene gold(I) complexes of types Au(CAAC)(Cl) [CAAC = cyclic (alkyl)(amino)carbene] (1) and [Au(CAAC)₂]⁺[X]^? (X = Cl, AuCl₂) (2) have been prepared through reaction of AuCl(SMe₂) with free carbenes a–e, and structurally characterized by single X-ray diffraction studies (1a, 1b, 2d, 2e). In addition two new free cyclic (alkyl)(amino)carbenes (c and e) have been synthesized.     

Synthesis of heteronuclear (MoRu2) clusters from 16-electron half-sandwich complexes (p-Cymene)Ru[E2C2(B10H10)] (E = S,Se)

The heterometallic cluster complexes {(p-Cymene)Ru[S₂C₂(B₁₀H₁₀)]}Mo(CO)₂{(CO)₃Ru[S₂C₂(B₁₀H₁₀)]} (2) and {(p-Cymene)Ru[Se₂C₂(B₁₀H₁₀)]}₂Mo(CO)₂ (3) (p-Cymene = η⁶-4-isopropyl-toluene) have been synthesized from the reactions of 16-electron half-sandwich ruthenium 1,2-dichalcogenolate carborane complexes (p-Cymene)Ru[E₂C₂(B₁₀H₁₀)] (E = S(1a), Se(1b)) with Mo(CO)₃(Py)₃ in the presence of BF₃ · Et₂O. The complexes of 2 and 3 were characterized by elemental analysis and IR, NMR spectra. The molecular structure of 2 has been characterized by single-crystal X-ray diffraction analysis. Complex 2 is unsymmetrical and the two Ru–Mo single bonds (2.7893(14), 2.8189(13) Å) are each supported by a symmetrically bridging o-carborane-1,2-dithiolato ligand.     

Correlation between molecular structure and optical properties for the bis(2-(2-hydroxyphenyl)benzothiazolate) complexes

A series of methyl-substituted bis(2-(hydroxyphenyl)benzothiazolate)zinc derivatives [Zn(n-MeBTZ)₂, n = 3 (1a), 4 (1b), 5 (1c)] were synthesized to investigate the correlation between molecular structures and optical properties. The results indicate that the blue-emitting (λ_max = 470 nm) complex 1b is monomer with a higher PL quantum efficiency than complexes 1, 1a, 1c. Two green-emitting (λ_max = 507 nm and 499 nm) complexes 1a and 1c have special bi-molecular structures. The molecular structure for Zn(BTZ)₂ (complex 1) is dimer. Bilayer organic light-emitting devices were fabricated by using these complexes as emitting layer. The maximum emission wavelengths of the devices are in the range of 501–553 nm. The devices show turn-on voltages at 9.2, 12.7, 2.3 and 10.7 V for complex 1, 1a, 1b, and 1c, respectively. In particular, the device with complex 1b shows a higher brightness than the other complexes under the same conditions.     

Synthesis and structural characterization of a photoresponsive organodirhodium complex with active S–S bonds: [(CpPhRh)2(μ-CH2)2(μ-O2SSO2)] (CpPh = η5-C5Me4Ph)

A photoresponsive rhodium dinuclear complex having phenyltetramethylcyclopentadienyl (Cp^Ph = η⁵-C₅Me₄Ph) and photosensitive dithionite (μ-O₂SSO₂) ligands, [(Cp^PhRh)₂(μ-CH₂)₂(μ-O₂SSO₂)] (1), has been synthesized. The crystal of complex 1 (monoclinic, C2/m (No. 12), a = 24.805(2) Å, b = 29.111(2) Å, c = 10.8475(11) Å, β = 105.9830(7)°, V = 7530.0(12) Å³, Z = 8) consists of two independent molecules, 1-cis and 1-trans, with different arrangement of the Cp^Ph ligands. The flexibility, volume, and shape of the reaction cavities around the dithionite unit of 1-cis and 1-trans in the crystal are discussed. The crystal structures of the precursors of 1, trans-[(Cp^PhRh)₂(μ-Cl)₂Cl₂] and trans-[(Cp^PhRh)₂(μ-CH₂)₂Me₂], are also reported.     

A new luminescent sulfate bridged dimeric copper(II) complex with DNA binding and SO2 fixation ability: Synthesis and structure

New luminescent mononuclear and dinuclear copper(II) (S = 1/2) complexes [Cu(HL)(H₂O)₂](ClO₄)₂ (1a) and [Cu₂(HL)₂(μ-SO₄)₂]·2H₂O (1b) were synthesized with the acyclic tridentate pyridine-2-carboxaldehyde-2-pyridylhydrazone ligand, HL (1). Interestingly, the mononuclear complex 1a can be converted into the disulfate bridged dimeric copper(II) complex 1b by passing freshly prepared SO₂ through the basic medium. On excitation at 290 nm, the ligand fluoresces at 364 nm due to an intraligand ¹(π–π1) transition. Upon complexation with copper(II), the emission peak is slightly blue shifted (356 nm, F/F₀ 0.76 for 1a and 354 nm, F/F₀ 0.89 for 1b) with a little quenching in the emission intensity. The association constants (K_ass (5.06 ± 0.004) × 10⁴ for 1a and K_ass (5.46 ± 0.006) × 10⁴ for 1b at 298 K) and the thermodynamic parameters have been determined by UV–Vis spectroscopy. The molecular structure of the complex 1b (Cu?Cu 4.456 Å) has been determined by single crystal X-ray diffraction studies. The complex 1b exhibits a strong interaction towards DNA as revealed from the K_b (intrinsic binding constant) 6.3 × 10⁴ M^?1 and K_sv (Stern–Volmer quenching constant) 2.93 values.     

Dimeric and monomeric palladium(II) parent-amido (NH2) complexes: Synthesis,characterization, and reactivity

The treatment of [PdL₃(NH₃)]OTf (L₃ = (PEt₃)₂(Ph) (1), (2,6-(Cy₂PCH₂)₂C₆H₃) (3)) with NaNH₂ in THF afforded dimeric and monomeric parent-amido palladium(II) complexes with bridging and terminal NH₂, respectively, anti-[Pd(PEt₃)(Ph)(μ-NH₂)]₂ (2) and Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂) (4). The dimeric complex 2 crystallizes in the space group P2₁/n with a = 13.228(2) Å, b = 18.132(2) Å, c = 24.745(2) Å, β = 101.41(1)°, and Z = 4. It has been found that there are two crystallographically independent molecules with Pd(1)–Pd(2) and Pd(3)–Pd(4) distances of 2.9594 (10) and 2.9401(9) Å, respectively. The monomeric amido complex 4 protonates from trace amounts of water to give the cationic ammine species [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₃)]⁺. Complex 4 reacts with diphenyliodonium triflate ([Ph₂I]OTf) to give aniline complex [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂Ph)]OTf (5). Reaction of 4 with dialkyl acetylenedicarboxylate (DMAD, DEAD) yields diastereospecific palladium(II) vinyl derivative (Z)–(Pd(Cy₂PCH₂)₂C₆H₃)(CR = CR(NH₂)) (R = CO₂Me (6a), CO₂Et (6b)). Reacting complexes 6a and 6b with p-nitrophenol produces (Pd(Cy₂PCH₂)₂C₆H₃)(OC₆H₄–p-NO₂) (8) and cis-CHR = CR(NH₂), exclusively.     

Oxidative addition of MeI to some cyclometalated organoplatinum(II) complexes: Kinetics and mechanism

New cyclometalated platinum(II) complexes [PtMe(C^N)L], 1, in which C^N = deprotonated 2-phenylpyridine (ppy), benzo[h]quinoline (bhq) or 2-(p-tolyl)pyridine (tpy) and L = PPh₃ or PMePh₂, were synthesized by the reaction of [PtMe(C^N)(SMe₂)] with 1 equiv of L. The reaction of complexes 1 with MeI gave the cyclometalated Pt(IV) complexes [PtMe₂I(C^N)L], 3. On the basis of kinetic studies, using Uv–visible spectroscopy, it was suggested that the latter oxidative addition reactions were proceeded by an S_N2 mechanism. The rates of the reactions at different temperatures were measured and consistent with the proposed mechanism, large negative ΔS³ values were found for each reaction. Besides, rate of reactions (in CHCl₃) involving the PPh₃ complexes [PtMe(C^N)(PPh₃)], were almost 3–5 times slower than those involving the PMePh₂ complexes [PtMe(C^N)(PMePh₂)]. This was attributed to the electronic and steric effects of PPh₃ ligand as compared with that of PMePh₂ ligand which was further confirmed using density functional theory (DFT) calculations through finding approximate structures for the described complexes.     

Metal–metal bond cleavage of carbene complexes by halogens: The crystal and molecular structures of ax-[Mn2(CO)9{C(OEt)2-thienyl}], [Mn(CO)4(I){C(OEt)2-thienyl}] and eq-[Mn2(CO)9{C(NH2)2-thienyl}]

The metal–metal bond in [M₂(CO)₉{C(OEt)R}] (M = Mn (1), Re (2), R = 2-thienyl (a), 2-bithienyl (b)) is readily cleaved with halogens to afford cis-[M(CO)₄(X){C(OEt)R}] (M = Mn (3), X = I; M = Re (4), X = Br). In the binuclear manganese complex, the carbene ligand is found in an axial position due to steric reasons, whereas the electronically favoured equatorial position is found for the carbene ligands in the corresponding rhenium complexes and in [Mn₂(CO)₉{C(NH₂)thienyl}] (5a), containing a sterically less demanding NH₂-substituent.     

Formation and isomerization of cis,cis-Ir(H)2(--Ph)(CO)(PPh3)2 and cis,cis-Ir(H)(--Ph)2(CO)(PPh3)2 in oxidative addition of hydrogen and phenylacetylene to trans-Ir(CO)(--Ph)(PPh3)2

Oxidative addition of H–R (H--Ph and H₂) to trans-Ir(--Ph)(CO)(PPh₃)₂ (2) gives the initial products, cis, cis-Ir(H)(--Ph)₂(CO)(PPh₃)₂ (3a) and cis, cis-Ir(H)₂(--Ph)(CO)(PPh₃)₂ (3b), respectively. Both cis-bis(PPh₃) complexes, 3a and 3b undergo isomerization to give the trans-bis(PPh₃) complexes, trans, trans-Ir(H)(--Ph)₂(CO)(PPh₃)₂ (4a) and cis, trans-Ir(H)₂(--Ph)(CO)(PPh₃)₂ (4b). The isomerization, 3b→4b is first order with respect to 3b with k₁=6.37×10⁻⁴ s⁻¹ at 25°C under N₂ in CDCl₃. The reaction rate (k₁) seems independent of the concentration of H₂. A large negative entropy of activation (ΔS^≠=−24.9±5.7 cal deg⁻¹ mol⁻¹) and a relatively small enthalpy of activation (ΔH^≠=14.5±3.3 kcal mol⁻¹) were obtained in the temperature range 15∼35°C for the isomerization, 3b→4b under 1 atm of H₂.     

Using pendant ferrocenyl group(s) as an intramolecular standard to probe the reduction of diiron hexacarbonyl model complexes for the sub-unit of [FeFe]-hydrogenase

The synthesis and characterisation of two diiron hexacarbonyl complexes [Fe₂(SXS)(CO)₆], 1 (SXS = ((^?SCH₂)₂C(CH₃)CH₂OCOFc, Fc = ferrocenyl group) and 2 (SXS = (^?SCH₂CH₂NHCOFc)₂), were described. By using intramolecularly integrated ferrocenyl group(s) in the complexes as an internal standard, the nature of two stepwise one-electron processes of the complexes coupled with a chemical reaction was clearly demonstrated. Examining how the reduction transformed into sole one-electron process with both increasing scanning rate under Ar/CO atmosphere and lowering temperature indicated conclusively that the reduction of both complexes couples to a chemical reaction which involves CO-loss.     

New thioether–dithiolate complexes of Cp1Ir and some reactivity features

The reaction of [Cp1IrCl₂]₂ (Cp* = η⁵ − C₅Me₅) with the tridentate 3-thiapentane-1,5-dithiolate ligand, S(CH₂CH₂S⁻)₂ (tpdt), led to the formation of [Cp1Ir(η³ − tpdt)] (1) in 81% isolated yield. Subsequent reactions of 1 with [Cp1IrCl₂]₂ in 2:1 and 1:1 molar equiv ratios resulted in the formation of [Cp1Ir(μ − η²:η³ − tpdt)Cp1IrCl][PF₆] (2) and [Cp1Irμ − η²:η³ − tpdt)Cp1IrCl][Cp1IrCl₃] (3) in 86 and 79% yields, respectively, based on 1, whereas the reactions of 1 with [(COD)IrCl]₂ (COD = 1,5-cyclooctadiene) in 2:1 and 1:1 molar equiv ratios resulted in the formation of the homo-bimetallic derivatives Cp1Ir(μ − η¹:η³ − tpdt)(COD)IrCl (4) (92% yield) and [Cp1Ir(μ − η²:η³ − tpdt)(COD)Ir] [(COD)IrCl₂] (5) (82% yield). Reactions between 1 and [(COD)RhCl]₂, yielded the hetero-bimetallic derivatives Cp1Ir(μ − η¹:η³ − tpdt)(COD)RhCl (6) and [Cp1Ir(μ − η²:η³ − tpdt)(COD)Rh][(COD)RhCl₂] (7), in 92 and 93% yields, respectively. The reaction of 1 with methyl iodide gave mono-methylated derivative [Cp1Ir(η³-C₄H₈S₃Me)]I (8) (93% yield). All these compounds have been comprehensively characterized.     

Molecular spin ladders self-assembly from [Ni(dmit)2]− building blocks: Syntheses,structures and magnetic properties

Two ion-pair compounds, consisting of 1-(4′-R-benzyl)pyridinium ([RBzPy]⁺, R = NO₂ (1) and Br (2)) and [Ni(dmit)₂]⁻ (dmit²⁻ = 2-thioxo-1,3-dithion-4,5-dithiolato), have been synthesized and structurally characterized. The anions of [Ni(dmit)₂]⁻ stack into dimers, which further construct into two-leg ladder through terminal S⋯S interactions in 1, lateral S⋯S interactions in 2. The weak H-bonding interactions of C–H⋯S were observed in 2, while only weak van de Waals interactions between anion and cations in 1. The magnetic susceptibilities measured in 2–300 K indicate AFM exchange interaction domination both two compounds. A peculiar magnetic transition at ∼100 K was observed in 1. An AFM ordering below ∼11 K was found in 2, and the best fit to magnetic susceptibility above 45 K in this compound, using a dimer model with s = 1/2, give rise to Δ/k_B = 36.1 K, zJ = −0.91 K, C = 3.2 × 10⁻³ emu K mol⁻¹ and χ₀ = −4.0 × 10⁻⁶ emu mol⁻¹ with g of 2.0 fixed.     

Synthesis of (NHC)Rh(cod)Cl and (NHC)RhCl(CO)2 complexes – Translation of the Rh- into the Ir-scale for the electronic properties of NHC ligands

Twenty-three different Rh complexes of the (NHC)RhCl(cod) and (NHC)RhCl(CO)₂ type were synthesized from [RhCl(cod)]₂. The electron donating nature of the NHC ligands was changed in a systematic manner. The redox potentials of the various (NHC)RhCl(cod) and the ν(CO) of the various (NHC)RhCl(CO)₂ were determined. A correlation of the Rh redox potentials and the Rh ν(CO), respectively, with the related data from analogous (NHC)IrCl(cod) and (NHC)IrCl(CO)₂ complexes established two linear relationships. The linear regression (R² = 0.993) of the Rh and the Ir redox potentials results in an equation for the redox potential transformation: E_1/2(Ir) = 1.016 · E_1/2(Rh) ? 0.076 V. The linear regression (R² = 0.97) of the Rh and Ir ν_av(CO) results in an equation for the ν_av(CO) transformation: ν_av(CO)Ir = 0.8695 · ν_av(CO)Rh + 250.7 cm^?1. In this manner the Rh and the Ir-scale for the determination of the electron donating properties of NHC ligands are unified.     

Magnetic properties of hybrid organo-inorganic copper(II) oxovanadate(V) phosphate and phosphonate bridged systems

The hybrid organo-inorganic compounds [Cu₄(bipy)₄V₄O₁₁(PO₄)₂]nH₂O (n ∼ 5) (1), [Cu₂(phen)₂(PO₄)(H₂PO₄)₂(VO₂) · 2H₂O] (2) and [Cu₂(phen)₂(O₃PCH₂PO₃)(V₂O₅) (H₂O)]H₂O (3) which present different bridging forms of the phosphate/phosphonate group, show different bulk magnetic properties. We herein analyze the magnetic behaviour of these compounds in terms of their structural parameters. We also report a theoretical study for compound (1) assuming four different magnetic exchange pathways between the copper centres present in the tetranuclear unit. For compound (1) the following J values were obtained J₁ = +3.29; J₂ = −0.63; J₃ = −2.23; J₄ = −46.14 cm⁻¹. Compound (2) presents a Curie–Weiss behaviour in the whole range of temperature (3–300 K), and compound (3) shows a maximum for the magnetic susceptibility at 64 K, typical for antiferromagnetic interactions. These data where fitted using a model previously reported in the literature, assuming two different magnetic exchange pathways between the four copper(II) centres, with J₁ = −30.0 and J₂ = −8.5 cm⁻¹.